ramips: add support for TP-Link MR6400 v4
authorFilip Moc <lede@moc6.cz>
Wed, 18 Nov 2020 19:38:21 +0000 (20:38 +0100)
committerDaniel Golle <daniel@makrotopia.org>
Mon, 23 Nov 2020 00:46:40 +0000 (00:46 +0000)
You can flash via tftp recovery:
 - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24
 - connect to any ethernet port
 - power on the device while holding the reset button
 - wait at least 8 seconds before releasing reset button

Flashing via OEM web interface does not work.

LTE module does not support DHCP so it must be configured via QMI.

Hardware Specification (v4.0 EU):
 - SoC: MT7628NN
 - Flash: Winbond W25Q64JVS (8MiB)
 - RAM: ESMT M14D5121632A (64MiB)
 - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
 - Ethernet: 1NIC (4x100M)
 - WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
 - Power: DC 9V 0.85A

Signed-off-by: Filip Moc <lede@moc6.cz>
target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v4.dts [new file with mode: 0644]
target/linux/ramips/image/mt76x8.mk
target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
target/linux/ramips/mt76x8/base-files/etc/board.d/02_network

diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v4.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v4.dts
new file mode 100644 (file)
index 0000000..f0b87b5
--- /dev/null
@@ -0,0 +1,97 @@
+#include "mt7628an_tplink_8m.dtsi"
+
+/ {
+       compatible = "tplink,tl-mr6400-v4", "mediatek,mt7628an-soc";
+       model = "TP-Link TL-MR6400 v4";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "white:power";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "white:wan";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan {
+                       label = "white:wlan";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               lan {
+                       label = "white:lan";
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+               };
+
+               signal1 {
+                       label = "white:signal1";
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+
+               signal2 {
+                       label = "white:signal2";
+                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+               };
+
+               signal3 {
+                       label = "white:signal3";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&state_default {
+       gpio {
+               groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "uart1", "wdt", "wled_an";
+               function = "gpio";
+       };
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+       mediatek,portdisable = <0x21>;
+};
+
+&wmac {
+       mtd-mac-address = <&factory 0x1f100>;
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x1f100>;
+};
index 54592883411e42c1f03f4a0b71387b861f39cf44..30c41420aa5cdc4cfa4f8559b87690eb6f165132 100644 (file)
@@ -482,6 +482,22 @@ define Device/tplink_tl-mr3420-v5
 endef
 TARGET_DEVICES += tplink_tl-mr3420-v5
 
+define Device/tplink_tl-mr6400-v4
+  $(Device/tplink-v2)
+  IMAGE_SIZE := 7808k
+  DEVICE_MODEL := TL-MR6400
+  DEVICE_VARIANT := v4
+  TPLINK_FLASHLAYOUT := 8Mmtk
+  TPLINK_HWID := 0x64000004
+  TPLINK_HWREV := 0x4
+  TPLINK_HWREVADD := 0x4
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
+       kmod-usb-serial kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
+  IMAGES := sysupgrade.bin tftp-recovery.bin
+  IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
+endef
+TARGET_DEVICES += tplink_tl-mr6400-v4
+
 define Device/tplink_tl-wa801nd-v5
   $(Device/tplink-v2)
   IMAGE_SIZE := 7808k
index e1c3454237aa386dac4afc64675299647354e4b1..4ed38bf5f2a3e0094b8e560e6e6d316413331209 100755 (executable)
@@ -75,6 +75,10 @@ tplink,tl-wr842n-v5)
        ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01"
        ;;
+tplink,tl-mr6400-v4)
+       ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e"
+       ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10"
+       ;;
 tplink,tl-wr841n-v13)
        ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt"
        ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2"
index a6272e5a55350a4765c3f5d5e6957e9dc58a53d6..a7e978a2e28b58bf5e9bcff503408e97d2b7deb0 100755 (executable)
@@ -112,6 +112,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
+       tplink,tl-mr6400-v4)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+               ;;
        tplink,tl-wr902ac-v3)
                ucidef_add_switch "switch0" \
                        "4:lan" "6@eth0"