ramips: make the alsa driver register the codec
authorJohn Crispin <john@openwrt.org>
Mon, 26 Oct 2015 09:00:42 +0000 (09:00 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 26 Oct 2015 09:00:42 +0000 (09:00 +0000)
this allows using the codec even if it is not listed in the DTS

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47256

target/linux/ramips/patches-3.18/0303-alsa.patch

index 703af4489be9dd50725c7fa42fef08bf88e22a41..a35d7a948040dc4a84f6f4292b91d545c0053e06 100644 (file)
 +
 --- /dev/null
 +++ b/sound/soc/mtk/mt76xx_i2s.c
-@@ -0,0 +1,309 @@
+@@ -0,0 +1,304 @@
 +/*
 + * mtk_audio_drv.c
 + *
 +      struct snd_pcm_runtime *runtime = substream->runtime;
 +      i2s_config_type* rtd = runtime->private_data;
 +
-+      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +      //printk("******* %s *******\n", __func__);
 +      switch(params_rate(params)){
 +      case 8000:
 +              srate = 32000;
 +              break;
 +      case 44100:
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +              srate = 44100;
 +              break;
 +      case 48000:
 +              break;
 +      }
 +      if(srate){
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +              if((rtd->bRxDMAEnable != GDMA_I2S_EN) && (rtd->bTxDMAEnable != GDMA_I2S_EN)){
-+                      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +                      rtd->srate = srate;
 +                      MSG("set audio sampling rate to %d Hz\n", rtd->srate);
 +              }
 +static int mt76xx_i2s_drv_probe(struct platform_device *pdev)
 +{
 +      //printk("****** %s ******\n", __func__);
-+      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +      return snd_soc_register_component(&pdev->dev, &mt76xx_i2s_component,
 +                                      &mt76xx_i2s_dai, 1);
 +}
 +#endif /* MTK_I2S_H_ */
 --- /dev/null
 +++ b/sound/soc/mtk/mt76xx_machine.c
-@@ -0,0 +1,319 @@
+@@ -0,0 +1,317 @@
 +/*
 + * mt76xx_machine.c
 + *
 +      unsigned long* pTable;
 +      int mclk,ret,targetClk = 0;
 +
-+      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +      /*For duplex mode, avoid setting twice.*/
 +      if((rtd->bRxDMAEnable == GDMA_I2S_EN) || (rtd->bTxDMAEnable == GDMA_I2S_EN))
 +              return 0;
-+      //printk("%s:%d \n",__func__,__LINE__);
 +#if defined(CONFIG_I2S_MCLK_12MHZ)
 +      mclk = 12000000;
 +#elif defined(CONFIG_I2S_MCLK_12P288MHZ)
 +#endif
 +      //snd_soc_dai_set_sysclk(codec_dai,0,mclk, SND_SOC_CLOCK_IN);
 +
-+      printk("%s:%s[%d]%d\n", __FILE__, __func__, __LINE__, params_rate(params));
 +      switch(params_rate(params)){
 +      case 8000:
 +              index = 0;
 +              //MSG("audio sampling rate %u should be %d ~ %d Hz\n", (u32)params_rate(params), MIN_SRATE_HZ, MAX_SRATE_HZ);
 +              break;
 +      }
-+printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +#if defined(CONFIG_SND_SOC_WM8960)
 +      /*
 +       * There is a fixed divide by 4 in the PLL and a selectable
 +       * divide by N after the PLL which should be set to divide by 2 to meet this requirement.
 +       * */
-+      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +      ret = snd_soc_dai_set_pll(codec_dai, 0, 0,mclk, targetClk*2);
 +      /* From app notes: allow Vref to stabilize to reduce clicks */
 +      if(rtd->slave_en){
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +              //printk("WM8960 is in master mode\n");
 +              ret = snd_soc_dai_set_clkdiv(codec_dai, WM8960_DCLKDIV, 0x1c4);
 +              ret = snd_soc_dai_set_clkdiv(codec_dai, WM8960_SYSCLKDIV, 0x5);
 +      pTable = i2s_codec_12p288Mhz;
 +      data = pTable[index];
 +#endif
-+      printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +      if(rtd->codec_pll_en)
 +              ret = snd_soc_dai_set_clkdiv(codec_dai, WM8960_DACDIV, (data<<3)|0x5);
 +      else
 +              ret = snd_soc_dai_set_clkdiv(codec_dai, WM8960_DACDIV, (data<<3|0x4));
-+printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 +#endif
 +
 +      return 0;
 +#if defined(CONFIG_SND_SOC_WM8750)
 +              I2C_BOARD_INFO("wm8750", (0x36 >> 1)),
 +#elif defined(CONFIG_SND_SOC_WM8960)
-+      //      I2C_BOARD_INFO("wm8960", (0x34 >> 1)),
 +              I2C_BOARD_INFO("codec_wm8960", (0x34)),
++      }, {
++              I2C_BOARD_INFO("wm8960", (0x34 >> 1)),
 +#endif
-+      },
++      }
 +};
 +
 +static struct platform_device *soc_mtk_i2s_dev;
 +      adapter = i2c_get_adapter(I2C_AUDIO_DEV_ID);
 +      if (!adapter)
 +              return -ENODEV;
-+      client = i2c_new_device(adapter, i2c_board_info);
++      client = i2c_new_device(adapter, &i2c_board_info[0]);
 +      if (!client)
 +              return -ENODEV;
++      i2c_get_clientdata(client);
 +
-+      i2c_put_adapter(adapter);
++      client = i2c_new_device(adapter, &i2c_board_info[1]);
++      if (!client)
++              return -ENODEV;
 +      i2c_get_clientdata(client);
 +
++      i2c_put_adapter(adapter);
++
 +      soc_mtk_i2s_dev =
 +              platform_device_register_simple("mt76xx-i2s", -1, NULL, 0);
 +      if (IS_ERR(soc_mtk_i2s_dev))
        }
        snd_soc_write(codec, WM8960_PLL1, reg);
  
-@@ -876,19 +964,27 @@
-       switch (div_id) {
-       case WM8960_SYSCLKDIV:
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-               reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9;
-               snd_soc_write(codec, WM8960_CLOCK1, reg | div);
-               break;
-       case WM8960_DACDIV:
-               reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7;
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-               snd_soc_write(codec, WM8960_CLOCK1, reg | div);
-               break;
-       case WM8960_OPCLKDIV:
-               reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f;
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
+@@ -888,7 +976,11 @@
                snd_soc_write(codec, WM8960_PLL1, reg | div);
                break;
        case WM8960_DCLKDIV:
 +#if 1
-+              printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
 +#else
 +              reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
                snd_soc_write(codec, WM8960_CLOCK2, reg | div);
                break;
        case WM8960_TOCLKSEL:
-@@ -962,7 +1058,7 @@
+@@ -962,7 +1054,7 @@
  {
        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
        struct wm8960_data *pdata = dev_get_platdata(codec->dev);
  
        wm8960->set_bias_level = wm8960_set_bias_level_out3;
  
-@@ -973,11 +1069,7 @@
+@@ -973,11 +1065,7 @@
                        wm8960->set_bias_level = wm8960_set_bias_level_capless;
        }