base-files: generate network config with "device" options
authorRafał Miłecki <rafal@milecki.pl>
Mon, 24 May 2021 14:45:06 +0000 (16:45 +0200)
committerRafał Miłecki <rafal@milecki.pl>
Thu, 27 May 2021 08:58:49 +0000 (10:58 +0200)
Replace "ifname" with "device" as netifd has been recently patches to
used the later one. It's more clear and accurate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
package/base-files/files/bin/config_generate
package/base-files/files/lib/functions/uci-defaults.sh
target/linux/gemini/base-files/etc/board.d/02_network
target/linux/realtek/base-files/etc/board.d/02_network

index be688a4ba3106bb39a904f62f4194dbb00dd9696..d8950903099a1f08d2b22a6a11aee884ceba968a 100755 (executable)
@@ -40,7 +40,7 @@ generate_static_network() {
        uci -q batch <<-EOF
                delete network.loopback
                set network.loopback='interface'
-               set network.loopback.ifname='lo'
+               set network.loopback.device='lo'
                set network.loopback.proto='static'
                set network.loopback.ipaddr='127.0.0.1'
                set network.loopback.netmask='255.0.0.0'
@@ -91,22 +91,22 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-       local ports ifname macaddr protocol type ipaddr netmask vlan
+       local ports device macaddr protocol type ipaddr netmask vlan
        local bridge=$2
 
        json_select network
                json_select "$1"
+                       json_get_vars device macaddr protocol ipaddr netmask vlan
                        json_get_values ports ports
-                       json_get_vars ifname macaddr protocol ipaddr netmask vlan
                json_select ..
        json_select ..
 
-       [ -n "$ifname" -o -n "$ports" ] || return
+       [ -n "$device" -o -n "$ports" ] || return
 
        # Force bridge for "lan" as it may have other devices (e.g. wireless)
        # bridged
        [ "$1" = "lan" -a -z "$ports" ] && {
-               ports="$ifname"
+               ports="$device"
        }
 
        [ -n "$ports" -a -z "$bridge" ] && {
@@ -117,19 +117,19 @@ generate_network() {
                        set network.@device[-1].macaddr='$macaddr'
                EOF
                for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
-               ifname=br-$1
+               device=br-$1
                type=
                macaddr=""
        }
 
        [ -n "$bridge" ] && {
-               [ -z "$ports" ] && ports="$ifname"
+               [ -z "$ports" ] && ports="$device"
                if [ -z "$vlan" ]; then
                        bridge_vlan_id=$((bridge_vlan_id + 1))
                        vlan=$bridge_vlan_id
                fi
                generate_bridge_vlan $1 $bridge "$ports" $vlan
-               ifname=$bridge.$vlan
+               device=$bridge.$vlan
                type=""
        }
 
@@ -137,12 +137,12 @@ generate_network() {
                delete network.$1
                set network.$1='interface'
                set network.$1.type='$type'
-               set network.$1.ifname='$ifname'
+               set network.$1.device='$device'
                set network.$1.proto='none'
        EOF
 
        if [ -n "$macaddr" ]; then
-               for name in $ifname; do
+               for name in $device; do
                        uci -q batch <<-EOF
                                delete network.$1_${name/./_}_dev
                                set network.$1_${name/./_}_dev='device'
@@ -172,14 +172,14 @@ generate_network() {
 
                dhcp)
                        # fixup IPv6 slave interface if parent is a bridge
-                       [ "$type" = "bridge" ] && ifname="br-$1"
+                       [ "$type" = "bridge" ] && device="br-$1"
 
                        uci set network.$1.proto='dhcp'
                        [ -e /proc/sys/net/ipv6 ] && {
                                uci -q batch <<-EOF
                                        delete network.${1}6
                                        set network.${1}6='interface'
-                                       set network.${1}6.ifname='$ifname'
+                                       set network.${1}6.device='$device'
                                        set network.${1}6.proto='dhcpv6'
                                EOF
                        }
@@ -196,7 +196,7 @@ generate_network() {
                                        set network.$1.ipv6='1'
                                        delete network.${1}6
                                        set network.${1}6='interface'
-                                       set network.${1}6.ifname='@${1}'
+                                       set network.${1}6.device='@${1}'
                                        set network.${1}6.proto='dhcpv6'
                                EOF
                        }
index 407a9c710ff72ffafd5162e427e2da2d73bbcd55..02882f43ca4ed719a1f84144c1d8ea67fa7f1553 100644 (file)
@@ -39,7 +39,7 @@ ucidef_set_interface() {
 
                [ -n "$opt" -a -n "$val" ] || break
 
-               [ "$opt" = "ifname" -a "$val" != "${val/ //}" ] && {
+               [ "$opt" = "device" -a "$val" != "${val/ //}" ] && {
                        json_select_array "ports"
                        for e in $val; do json_add_string "" "$e"; done
                        json_close_array
@@ -79,11 +79,11 @@ ucidef_set_compat_version() {
 }
 
 ucidef_set_interface_lan() {
-       ucidef_set_interface "lan" ifname "$1" protocol "${2:-static}"
+       ucidef_set_interface "lan" device "$1" protocol "${2:-static}"
 }
 
 ucidef_set_interface_wan() {
-       ucidef_set_interface "wan" ifname "$1" protocol "${2:-dhcp}"
+       ucidef_set_interface "wan" device "$1" protocol "${2:-dhcp}"
 }
 
 ucidef_set_interfaces_lan_wan() {
@@ -201,14 +201,14 @@ _ucidef_finish_switch_roles() {
 
                        json_select_object "$role"
                                # attach previous interfaces (for multi-switch devices)
-                               json_get_var devices ifname
+                               json_get_var devices device
                                if ! list_contains devices "$device"; then
                                        devices="${devices:+$devices }$device"
                                fi
                        json_select ..
                json_select ..
 
-               ucidef_set_interface "$role" ifname "$devices"
+               ucidef_set_interface "$role" device "$devices"
        done
 }
 
index 58eb9ed40cf48025f06130677b8dcf68f4b04d78..d6ee5cadfe25a39674888536b62a94db368425e3 100644 (file)
@@ -6,17 +6,17 @@ board_config_update
 case "$(board_name)" in
 dlink,dir-685)
        # These are all connected to eth0 thru RTL8366RB
-       ucidef_set_interface "eth" ifname "eth0" protocol "none"
+       ucidef_set_interface "eth" device "eth0" protocol "none"
        ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
        ;;
 itian,sq201)
        # These are all connected to eth1 thru VSC7395
-       ucidef_set_interface "eth" ifname "eth1" protocol "none"
+       ucidef_set_interface "eth" device "eth1" protocol "none"
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
        ;;
 storlink,gemini324)
        # These are all connected to eth1 thru VSC7385
-       ucidef_set_interface "eth" ifname "eth1" protocol "none"
+       ucidef_set_interface "eth" device "eth1" protocol "none"
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
        ;;
 esac
index c1dd230bb89f50621db10d5c60f9fb76de912972..6568017b52526ed1a0afbbf1fd6ce8059949449d 100644 (file)
@@ -23,7 +23,7 @@ for lan in /sys/class/net/lan*; do
 done
 ucidef_set_bridge_device switch
 ucidef_set_interface_wan "$lan_list"
-ucidef_set_interface "lan" ifname "lan1:t" protocol "static" vlan 100
+ucidef_set_interface "lan" device "lan1:t" protocol "static" vlan 100
 
 lan_mac=""
 wan_mac=""