include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2020.07
+PKG_VERSION:=2023.04
-PKG_HASH:=c1f5bf9ee6bb6e648edbf19ce2ca9452f614b08a9f886f1a566aa42e8cf05f6a
+PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341
PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
UBOOT_MAKE_FLAGS += \
- BL31=$(STAGING_DIR_IMAGE)/bl31_sunxi-$(ATF).bin
+ BL31=$(STAGING_DIR_IMAGE)/bl31_sunxi-$(ATF).bin SCP=/dev/null
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+++ /dev/null
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -475,6 +475,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
- sun6i-a31-m9.dtb \
- sun6i-a31-mele-a1000g-quad.dtb \
- sun6i-a31-mixtile-loftq.dtb \
-+ sun6i-a31-pangolin.dtb \
- sun6i-a31s-colorfly-e708-q1.dtb \
- sun6i-a31s-cs908.dtb \
- sun6i-a31s-inet-q972.dtb \
---- a/arch/arm/dts/sun6i-a31.dtsi
-+++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -641,6 +641,11 @@
- function = "lcd0";
- };
-
-+ i2c3_pins_a: i2c3@0 {
-+ allwinner,pins = "PB5", "PB6";
-+ allwinner,function = "i2c3";
-+ };
-+
- mmc0_pins_a: mmc0@0 {
- pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31-pangolin.dts
-@@ -0,0 +1,292 @@
-+/*
-+ * Copyright 2015, Theobroma Systems Design und Consulting GmbH
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun6i-a31.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Theobroma Systems A31 Pangolin";
-+ compatible = "tsd,a31-pangolin", "allwinner,sun6i-a31";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial2 = &uart2;
-+ spi0 = &spi0;
-+ spi1 = &spi1;
-+ spi2 = &spi2;
-+ spi3 = &spi3;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial2:115200n8";
-+ };
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&ohci2 {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "rgmii";
-+ snps,reset-gpio = <&pio 0 7 GPIO_ACTIVE_LOW>;
-+ snps,reset-active-low;
-+ snps,reset-delays-us = <0 10000 30000>;
-+ status = "okay";
-+
-+ phy1: ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c3_pins_a>;
-+ status = "okay";
-+
-+ rtc_twi: rtc@6f {
-+ compatible = "isil,isl1208";
-+ reg = <0x6f>;
-+ };
-+ fan: fan@18 {
-+ compatible = "ti,amc6821";
-+ reg = <0x18>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <9>;
-+ #cooling-cells = <2>;
-+ };
-+};
-+
-+&spi0 {
-+ status = "okay";
-+
-+ flash: flash@0 {
-+ compatible = "spansion,m25p40";
-+ spi-max-frequency = <16000000>;
-+ spi-cpol;
-+ spi-cpha;
-+ };
-+};
-+
-+&spi1 {
-+ status = "okay";
-+};
-+
-+&ir {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir_pins_a>;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_pangolin>;
-+ vmmc-supply = <®_vcc3v0>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
-+ status = "okay";
-+};
-+
-+&mmc0_pins_a {
-+ /* external pull-ups missing for some pins */
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+};
-+
-+&mmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc2_pins_a>;
-+ vmmc-supply = <®_vcc3v0>;
-+ bus-width = <8>;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&pio {
-+ mmc0_cd_pin_pangolin: mmc0_cd_pin@0 {
-+ allwinner,pins = "PC19";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ leds_pins_pangolin: led_pins@0 {
-+ allwinner,pins = "PH7", "PC16";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ mmc2_pins_a: mmc2@0 {
-+ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11",
-+ "PC12","PC13","PC14","PC15";
-+ allwinner,function = "mmc2";
-+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+&p2wi {
-+ status = "okay";
-+
-+ axp221: pmic@68 {
-+ compatible = "x-powers,axp221";
-+ reg = <0x68>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ dcdc1-supply = <&vcc_3v0>;
-+ dcdc5-supply = <&vcc_dram>;
-+
-+ regulators {
-+ x-powers,dcdc-freq = <3000>;
-+
-+ vcc_3v0: dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+ };
-+
-+ vdd_cpu: dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpu";
-+ };
-+
-+ vdd_gpu: dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-gpu";
-+ };
-+
-+ vdd_sys_dll: dcdc4 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-sys-dll";
-+ };
-+
-+ vcc_dram: dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+ };
-+
-+ vcc_wifi: aldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc_wifi";
-+ };
-+
-+ avcc: aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+ };
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usb1_vbus_pin_a {
-+ allwinner,pins = "PD23";
-+};
-+
-+®_usb1_vbus {
-+ gpio = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD 23 */
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ status = "okay";
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+};
---- /dev/null
-+++ b/configs/pangolin_defconfig
-@@ -0,0 +1,36 @@
-+CONFIG_SUNXI_PANGOLIN=y
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII"
-+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-pangolin"
-+CONFIG_VIDEO_VGA_VIA_LCD=y
-+CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN6I=y
-+CONFIG_DRAM_CHANNELS=1
-+CONFIG_DRAM_CLK=360
-+CONFIG_DRAM_ZQ=70
-+CONFIG_AXP_DCDC1_VOLT=3300
-+CONFIG_AXP_ALDO1_VOLT=0
-+CONFIG_AXP_ALDO2_VOLT=1800
-+CONFIG_AXP_ALDO3_VOLT=3000
-+CONFIG_AXP_DLDO4_VOLT=3300
-+CONFIG_AXP_ELDO1_VOLT=1200
-+CONFIG_AXP_ELDO2_VOLT=2500
-+CONFIG_AXP_ELDO3_VOLT=3300
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_CONS_INDEX=3
-+# Vbus gpio for usb1
-+CONFIG_USB1_VBUS_PIN=""
-+# No Vbus gpio for usb2
-+CONFIG_USB2_VBUS_PIN=""
-+CONFIG_USB=y
-+CONFIG_DM_USB=y
-+CONFIG_USB_EHCI=y
-+CONFIG_USB_KEYBOARD=y
-+CONFIG_DM_ETH=y
-+CONFIG_CMD_IMLS=n
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_DM_SPI=y
-+CONFIG_DM_SPI_FLASH=y
-+CONFIG_SUNXI_SPI=y
---- a/arch/arm/mach-sunxi/Kconfig
-+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -896,6 +896,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
- Set the SCL pin for the LCD i2c interface. This takes a string in the
- format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
-
-+choice
-+ prompt "Sunxi Board Variant"
-+ optional
-+
-+config SUNXI_PANGOLIN
-+ bool "Theobroma A31 uQ7 Board"
-+
-+endchoice
-
- # Note only one of these may be selected at a time! But hidden choices are
- # not supported by Kconfig
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
-@@ -23,6 +23,7 @@ CONFIG_ETH_DESIGNWARE=y
+@@ -26,6 +26,7 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
+++ /dev/null
---- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-@@ -8,6 +8,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
- CONFIG_USB0_VBUS_PIN="PC17"
- CONFIG_USB0_VBUS_DET="PH5"
- CONFIG_I2C1_ENABLE=y
-+CONFIG_PHY_MICREL=y
-+CONFIG_PHY_MICREL_KSZ90X1=y
- CONFIG_SATAPWR="PC3"
- CONFIG_SPL_SPI_SUNXI=y
- CONFIG_AHCI=y
---- a/configs/A20-OLinuXino-Lime2_defconfig
-+++ b/configs/A20-OLinuXino-Lime2_defconfig
-@@ -7,6 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
- CONFIG_USB0_VBUS_PIN="PC17"
- CONFIG_USB0_VBUS_DET="PH5"
- CONFIG_I2C1_ENABLE=y
-+CONFIG_PHY_MICREL=y
-+CONFIG_PHY_MICREL_KSZ90X1=y
- CONFIG_SATAPWR="PC3"
- CONFIG_AHCI=y
- # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
---- a/drivers/net/phy/micrel_ksz90x1.c
-+++ b/drivers/net/phy/micrel_ksz90x1.c
-@@ -14,6 +14,8 @@
- #include <errno.h>
- #include <micrel.h>
- #include <phy.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-
- /*
- * KSZ9021 - KSZ9031 common
-@@ -344,6 +346,10 @@ static int ksz9031_phy_extwrite(struct p
- static int ksz9031_config(struct phy_device *phydev)
- {
- int ret;
-+ struct sunxi_ccm_reg *const ccm =
-+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+ setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_DELAY(4));
-
- ret = ksz9031_of_config(phydev);
- if (ret)
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
-@@ -114,11 +114,12 @@ void clock_set_pll1(unsigned int clk)
+@@ -131,11 +131,12 @@ void clock_set_pll1(unsigned int clk)
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
-@@ -27,13 +27,26 @@ void clock_init_safe(void)
+@@ -28,13 +28,26 @@ void clock_init_safe(void)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
#endif
#if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
---- a/arch/arm/include/asm/arch-sunxi/prcm.h
-+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
+--- a/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
++++ b/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
@@ -110,13 +110,13 @@
#define PRCM_PLL_CTRL_LDO_OUT_MASK \
__PRCM_PLL_CTRL_LDO_OUT(0x7)
+++ /dev/null
-From d7311b6e7cdd1fc0e92665188e650934718cb2b1 Mon Sep 17 00:00:00 2001
-From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
-Date: Tue, 16 Jun 2015 10:52:01 +0200
-Subject: sun6i: define alternate-function for UART2 on GPG
-
-
---- a/arch/arm/include/asm/arch-sunxi/gpio.h
-+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -190,6 +190,7 @@ enum sunxi_gpio_number {
- #define SUN6I_GPG_SDC1 2
- #define SUN8I_GPG_SDC1 2
- #define SUN6I_GPG_TWI3 2
-+#define SUN6I_GPG_UART2 2
- #define SUN5I_GPG_UART1 4
-
- #define SUN6I_GPH_PWM 2
+++ /dev/null
-From c058dfb69136d62f88ae8b121104bdb7ce2df03f Mon Sep 17 00:00:00 2001
-From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
-Date: Tue, 16 Jun 2015 10:53:11 +0200
-Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
-
-
---- a/arch/arm/mach-sunxi/board.c
-+++ b/arch/arm/mach-sunxi/board.c
-@@ -132,6 +132,10 @@ static int gpio_init(void)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
- sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
-+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
-+ sunxi_gpio_set_cfgpin(SUNXI_GPG(6), SUN6I_GPG_UART2);
-+ sunxi_gpio_set_cfgpin(SUNXI_GPG(7), SUN6I_GPG_UART2);
-+ sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP);
- #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -244,6 +244,8 @@ extern int soft_i2c_gpio_scl;
- #endif
- #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
- #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
-+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
-+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
- #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
- #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
- #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+++ /dev/null
-From 78d5fab8e345b1273ec8c22d06f1a1d27670b518 Mon Sep 17 00:00:00 2001
-From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
-Date: Tue, 16 Jun 2015 10:59:38 +0200
-Subject: ARM: sunxi: Make CONS_INDEX configurable
-
-
---- a/arch/arm/mach-sunxi/Kconfig
-+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -559,6 +559,14 @@ config SYS_BOARD
- config SYS_SOC
- default "sunxi"
-
-+config CONS_INDEX
-+ int "UART used for console"
-+ range 1 5
-+ default 1
-+ ---help---
-+ Defines the UART port used for serial output. It starts at 1 so UART0 is 1,
-+ UART1 is 2 and so on.
-+
- config UART0_PORT_F
- bool "UART0 on MicroSD breakout board"
- default n
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
-@@ -751,9 +751,14 @@ static int fit_handle_file(struct image_
+@@ -754,9 +754,14 @@ static int fit_handle_file(struct image_
}
*cmd = '\0';
} else if (params->datafile) {
+++ /dev/null
-From def280c4792262a368c8861312dc6b376181021f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 1 Jan 2018 23:10:56 +0100
-Subject: sunxi: deactivate binman
-
-Use the old way to generate the images instead of binman.
-binman needs python with swig to avoid this host tool dependency use the
-old way of generating images.
----
- Makefile | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1607,8 +1607,10 @@ endif
-
- ifneq ($(CONFIG_ARCH_SUNXI),)
- ifeq ($(CONFIG_ARM64),)
--u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
-- $(call if_changed,binman)
-+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-+ $(call if_changed,pad_cat)
- else
- u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
- $(call if_changed,cat)
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -995,7 +995,6 @@ config ARCH_SOCFPGA
-
- config ARCH_SUNXI
- bool "Support sunxi (Allwinner) SoCs"
-- select BINMAN
- select CMD_GPIO
- select CMD_MMC if MMC
- select CMD_USB if DISTRO_DEFAULTS
+++ /dev/null
---- a/configs/A13-OLinuXino_defconfig
-+++ b/configs/A13-OLinuXino_defconfig
-@@ -7,7 +7,6 @@ CONFIG_DRAM_EMR1=0
- CONFIG_MMC0_CD_PIN="PG0"
- CONFIG_USB0_VBUS_DET="PG1"
- CONFIG_USB1_VBUS_PIN="PG11"
--CONFIG_AXP_GPIO=y
- # CONFIG_VIDEO_HDMI is not set
- CONFIG_VIDEO_VGA_VIA_LCD=y
- CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
-@@ -20,7 +19,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
- CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
- CONFIG_DFU_RAM=y
- CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
--CONFIG_AXP_ALDO3_VOLT=3300
-+CONFIG_SUNXI_NO_PMIC=y
- CONFIG_CONS_INDEX=2
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
+++ /dev/null
-From 2527b24f39d8f27ba2fd922ca27a1f14119cfa1b Mon Sep 17 00:00:00 2001
-From: Yu-Tung Chang <mtwget@gmail.com>
-Date: Sat, 19 Jun 2021 16:16:45 +0800
-Subject: [PATCH] sunxi: h3: Add initial ZeroPi support
-
-ZeroPi is a new board of high performance with low cost
-designed by FriendlyElec., using the Allwinner H3 SOC.
-
-ZeroPi features
-- Allwinner H3, Quad-core Cortex-A7@1.2GHz
-- 256MB/512MB DDR3 RAM
-- microsd slot
-- 10/100/1000Mbps Ethernet
-- Debug Serial Port
-- DC 5V/2A power-supply
-
-Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
-Reviewed-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
----
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -560,7 +560,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
- sun8i-h3-orangepi-plus.dtb \
- sun8i-h3-orangepi-plus2e.dtb \
- sun8i-h3-orangepi-zero-plus2.dtb \
-- sun8i-h3-rervision-dvk.dtb
-+ sun8i-h3-rervision-dvk.dtb \
-+ sun8i-h3-zeropi.dtb
- dtb-$(CONFIG_MACH_SUN8I_R40) += \
- sun8i-r40-bananapi-m2-ultra.dtb \
- sun8i-v40-bananapi-m2-berry.dtb
---- /dev/null
-+++ b/arch/arm/dts/sun8i-h3-zeropi.dts
-@@ -0,0 +1,85 @@
-+/*
-+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+ model = "FriendlyARM ZeroPi";
-+ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+ };
-+};
-+
-+&external_mdio {
-+ ext_rgmii_phy: ethernet-phy@7 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <7>;
-+ };
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <®_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii-id";
-+
-+ allwinner,leds-active-low;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ status = "okay";
-+ dr_mode = "host";
-+};
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -508,3 +508,9 @@ YONES TOPTECH BS1078 V2 BOARD
- M: Peter Korsgaard <peter@korsgaard.com>
- S: Maintained
- F: configs/Yones_Toptech_BS1078_V2_defconfig
-+
-+ZEROPI BOARD
-+M: Yu-Tung Chang <mtwget@gmail.com>
-+S: Maintained
-+F: configs/zeropi_defconfig
-+F: arch/arm/dts/sun8i-h3-zeropi.dts
---- /dev/null
-+++ b/configs/zeropi_defconfig
-@@ -0,0 +1,13 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi"
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_MACPWR="PD6"
-+# CONFIG_VIDEO_DE2 is not set
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
create mode 100644 configs/nanopi_r1_defconfig
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -551,6 +551,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
- sun8i-h3-nanopi-m1-plus.dtb \
- sun8i-h3-nanopi-neo.dtb \
- sun8i-h3-nanopi-neo-air.dtb \
-+ sun8i-h3-nanopi-r1.dtb \
- sun8i-h3-orangepi-2.dtb \
- sun8i-h3-orangepi-lite.dtb \
- sun8i-h3-orangepi-one.dtb \
---- /dev/null
-+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,146 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ */
-+
-+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+ model = "FriendlyARM NanoPi R1";
-+ compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ vdd_cpux: gpio-regulator {
-+ compatible = "regulator-gpio";
-+ pinctrl-names = "default";
-+ regulator-name = "vdd-cpux";
-+ regulator-type = "voltage";
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1300000>;
-+ regulator-ramp-delay = <50>;
-+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+ gpios-states = <0x1>;
-+ states = <1100000 0x0
-+ 1300000 0x1>;
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ pinctrl-names = "default";
-+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ leds {
-+ /delete-node/ pwr;
-+ status {
-+ label = "nanopi:red:status";
-+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ wan {
-+ label = "nanopi:green:wan";
-+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ lan {
-+ label = "nanopi:green:lan";
-+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ r_gpio_keys {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sw_r_npi>;
-+
-+ /delete-node/ k1;
-+ reset {
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ehci2 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <®_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii";
-+ status = "okay";
-+};
-+
-+&external_mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <7>;
-+ };
-+};
-+
-+&mmc1 {
-+ vmmc-supply = <®_vcc3v3>;
-+ vqmmc-supply = <®_vcc3v3>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ sdio_wifi: sdio_wifi@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
-+&mmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc2_8bit_pins>;
-+ vmmc-supply = <®_vcc3v3>;
-+ vqmmc-supply = <®_vcc3v3>;
-+ bus-width = <8>;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&ohci2 {
-+ status = "okay";
-+};
-+
-+&r_pio {
-+ sw_r_npi: key_pins {
-+ pins = "PL3";
-+ function = "gpio_in";
-+ };
-+};
--- /dev/null
+++ b/configs/nanopi_r1_defconfig
@@ -0,0 +1,21 @@
+++ /dev/null
-From e7510d24cab4741f72489b9d67c2d42b18fe5374 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 10 Oct 2021 21:36:57 +0800
-Subject: [PATCH] sunxi: Add support for FriendlyARM NanoPi R1S H5
-
-This adds support for the NanoPi R1S H5 board.
-
-Allwinner H5 SoC
-512MB DDR3 RAM
-10/100/1000M Ethernet x 2
-RTL8189ETV WiFi 802.11b/g/n
-USB 2.0 host port (A)
-MicroSD Slot
-Reset button
-Serial Debug Port
-WAN - LAN - SYS LED
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 195 +++++++++++++++++++++++
- board/sunxi/MAINTAINERS | 5 +
- configs/nanopi_r1s_h5_defconfig | 14 ++
- 4 files changed, 215 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
- create mode 100644 configs/nanopi_r1s_h5_defconfig
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -575,6 +575,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
- sun50i-h5-libretech-all-h5-cc.dtb \
- sun50i-h5-nanopi-neo2.dtb \
- sun50i-h5-nanopi-neo-plus2.dtb \
-+ sun50i-h5-nanopi-r1s-h5.dtb \
- sun50i-h5-orangepi-zero-plus.dtb \
- sun50i-h5-orangepi-pc2.dtb \
- sun50i-h5-orangepi-prime.dtb \
---- /dev/null
-+++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
-@@ -0,0 +1,190 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
-+ *
-+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
-+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
-+ * Copyright (C) 2016 ARM Ltd.
-+ */
-+
-+/dts-v1/;
-+#include "sun50i-h5.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "FriendlyARM NanoPi R1S H5";
-+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ ethernet1 = &rtl8189etv;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ sys {
-+ label = "nanopi:red:sys";
-+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ lan {
-+ label = "nanopi:green:lan";
-+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "nanopi:green:wan";
-+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ r-gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ reset {
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ reg_vcc3v3: vcc3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ reg_usb0_vbus: usb0-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb0-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
-+ status = "okay";
-+ };
-+
-+ vdd_cpux: gpio-regulator {
-+ compatible = "regulator-gpio";
-+ regulator-name = "vdd-cpux";
-+ regulator-type = "voltage";
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1300000>;
-+ regulator-ramp-delay = <50>; /* 4ms */
-+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+ gpios-states = <0x1>;
-+ states = <1100000 0x0>, <1300000 0x1>;
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+ post-power-on-delay-ms = <200>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ehci2 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <®_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&external_mdio {
-+ ext_rgmii_phy: ethernet-phy@7 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <7>;
-+ };
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ eeprom@51 {
-+ compatible = "microchip,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+};
-+
-+&mmc0 {
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ vmmc-supply = <®_vcc3v3>;
-+ vqmmc-supply = <®_vcc3v3>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ rtl8189etv: sdio_wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&ohci2 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pa_pins>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ /* USB Type-A port's VBUS is always on */
-+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+ usb0_vbus-supply = <®_usb0_vbus>;
-+ status = "okay";
-+};
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -358,6 +358,11 @@ M: Jelle van der Waa <jelle@vdwaa.nl>
- S: Maintained
- F: configs/nanopi_neo_air_defconfig
-
-+NANOPI-R1S-H5 BOARD
-+M: Chukun Pan <amadeus@jmu.edu.cn>
-+S: Maintained
-+F: configs/nanopi_r1s_h5_defconfig
-+
- NANOPI-A64 BOARD
- M: Jagan Teki <jagan@amarulasolutions.com>
- S: Maintained
---- /dev/null
-+++ b/configs/nanopi_r1s_h5_defconfig
-@@ -0,0 +1,14 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I_H5=y
-+CONFIG_DRAM_CLK=672
-+CONFIG_DRAM_ZQ=3881977
-+# CONFIG_DRAM_ODT_EN is not set
-+CONFIG_MACPWR="PD6"
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5"
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
+++ /dev/null
-From 20abdd7feefbb4fccef5c653e045911670237e8b Mon Sep 17 00:00:00 2001
-From: Stijn Tintel <stijn@linux-ipv6.be>
-Date: Thu, 22 Dec 2022 00:35:07 +0200
-Subject: [PATCH] arm: sunxi: increase SYS_MALLOC_F_LEN
-
-Version 2020.10 throws the following output after loading bl31:
-alloc space exhausted
-
-This has been fixed in v2022.07, but the change is too intrusive to
-backport. Instead, just modify the default for ARCH_SUNXI for now.
-
-See e05689242238 ("Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000").
-
-Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
----
- Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Kconfig
-+++ b/Kconfig
-@@ -146,7 +146,7 @@ config SYS_MALLOC_F_LEN
- default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
- ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
- ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
-- ARCH_LS1046A || ARCH_QEMU)
-+ ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI)
- default 0x400
- help
- Before relocation, memory is very limited on many platforms. Still,
--- /dev/null
+--- a/Makefile
++++ b/Makefile
+@@ -2000,26 +2000,7 @@ endif
+ # Check dtc and pylibfdt, if DTC is provided, else build them
+ PHONY += scripts_dtc
+ scripts_dtc: scripts_basic
+- $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
+- $(MAKE) $(build)=scripts/dtc; \
+- else \
+- if ! $(DTC) -v >/dev/null; then \
+- echo '*** Failed to check dtc version: $(DTC)'; \
+- false; \
+- else \
+- if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
+- echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
+- false; \
+- else \
+- if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
+- if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
+- echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
+- false; \
+- fi; \
+- fi; \
+- fi; \
+- fi; \
+- fi
++ $(MAKE) $(build)=scripts/dtc
+
+ # ---------------------------------------------------------------------------
+ quiet_cmd_cpp_lds = LDS $@
projects / openwrt / openwrt.git / commitdiff