ath25: fix preinit Ethernet port configuration

vconfig is no more installed by default to a firmware image. So, replace
vconfig calls for VLAN subinterface configuration by coresponding
ip-link commands.

Also drop few useless comments from the preinit hook script, while we
are at it.

I have no chance to test this fix since I have no board with a subject
switch IC, but this is still better then call an utility that is
unavailable in the firmware for years.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
[use documented syntax for ip link add]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
index 235ba4befc2595549c3014be6a220ca7433488bb..b795aac45f9bfe738e80399ab4db249d88fc8b21 100644 (file)
--- a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
+++ b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
@@ -1,12 +1,10 @@
-# reset button only supported on ar5315+ at the moment
 preinit_ip() {
        if [ -z "$pi_ifname" ]; then
                grep -q 'Atheros AR231[567]' /proc/cpuinfo && {
                        if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
                             -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-                               vconfig set_name_type DEV_PLUS_VID_NO_PAD
                                ip link set eth0 up
-                               vconfig add eth0 1
+                               ip link add link eth0 name eth0.1 type vlan id 1
                                ifname=eth0.1
                        else
                                ifname=eth0
@@ -20,13 +18,10 @@ preinit_ip() {
        }
 }
 
-
-# reset button only supported on ar5315+ at the moment
-
 preinit_ip_deconfig() {
        if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
             -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-               vconfig rem eth0.1 2>/dev/null
+               ip link del eth0.1 2>/dev/null
                ip link set $pi_ifname down
        elif [ -n "$pi_ifname" ]; then
                ip -4 addr flush dev $pi_ifname