PKG_DRIVERS = \
adm8211 \
airo \
- b43 b43legacy brcmsmac brcmfmac brcmutil \
hermes hermes-pci hermes-pcmcia hermes-plx\
iwl-legacy iwl3945 iwl4965 iwlwifi \
lib80211 \
CONFIG_PACKAGE_MAC80211_DEBUGFS \
CONFIG_PACKAGE_MAC80211_MESH \
CONFIG_PACKAGE_MAC80211_TRACING \
- CONFIG_PACKAGE_B43_DEBUG \
- CONFIG_PACKAGE_B43_PIO \
- CONFIG_PACKAGE_B43_PHY_G \
- CONFIG_PACKAGE_B43_PHY_N \
- CONFIG_PACKAGE_B43_PHY_LP \
- CONFIG_PACKAGE_B43_PHY_HT \
- CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \
- CONFIG_PACKAGE_B43_BUSES_BCMA \
- CONFIG_PACKAGE_B43_BUSES_SSB \
- CONFIG_PACKAGE_BRCM80211_DEBUG \
CONFIG_PACKAGE_IWLWIFI_DEBUG \
CONFIG_PACKAGE_IWLWIFI_DEBUGFS \
CONFIG_PACKAGE_RTLWIFI_DEBUG \
config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH
include ath.mk
+include broadcom.mk
include ralink.mk
PKG_CONFIG_DEPENDS += \
Kernel support for Cisco Aironet cards
endef
-#Broadcom firmware
-ifneq ($(CONFIG_B43_FW_6_30),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=6.30.163.46
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
- PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d
-else
-ifneq ($(CONFIG_B43_FW_5_10),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.10.56.27.3
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009
-else
-ifneq ($(CONFIG_B43_FW_4_178),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=4.178.10.4
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f
-else
-ifneq ($(CONFIG_B43_FW_5_100_138),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.100.138
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
- PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
-else
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=4.150.10.5
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533
-endif
-endif
-endif
-endif
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.2
- PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
- PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
- PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware
- PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc
-endif
-
-
-define Download/b43
- FILE:=$(PKG_B43_FWV4_SOURCE)
- URL:=$(PKG_B43_FWV4_SOURCE_URL)
- HASH:=$(PKG_B43_FWV4_HASH)
-endef
-$(eval $(call Download,b43))
-
-define KernelPackage/b43
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom 43xx wireless support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
- KCONFIG:= \
- CONFIG_HW_RANDOM=y
- # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
- DEPENDS += \
- @PCI_SUPPORT +kmod-mac80211 \
- $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
- $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
- AUTOLOAD:=$(call AutoProbe,b43)
- MENU:=1
-endef
-
-define KernelPackage/b43/config
-
-config PACKAGE_B43_USE_SSB
- select PACKAGE_kmod-ssb
- tristate
- depends on !TARGET_brcm47xx && !TARGET_brcm63xx
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
-
-config PACKAGE_B43_USE_BCMA
- select PACKAGE_kmod-bcma
- tristate
- depends on !TARGET_brcm47xx && !TARGET_bcm53xx
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
-
- if PACKAGE_kmod-b43
-
- choice
- prompt "b43 firmware version"
- default B43_FW_5_100_138
- help
- This option allows you to select the version of the b43 firmware.
-
- config B43_FW_4_150
- bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
- help
- Old stable firmware for BCM43xx devices.
-
- If unsure, select this.
-
- config B43_FW_4_178
- bool "Firmware 478.104 from driver 4.178.10.4"
- help
- Older firmware for BCM43xx devices.
-
- If unsure, select the "stable" firmware.
-
- config B43_FW_5_10
- bool "Firmware 508.1084 from driver 5.10.56.27"
- help
- Older firmware for BCM43xx devices.
-
- If unsure, select the "stable" firmware.
-
- config B43_FW_5_100_138
- bool "Firmware 666.2 from driver 5.100.138 (stable)"
- help
- The currently default firmware for BCM43xx devices.
-
- This firmware currently gets most of the testing and is needed for some N-PHY devices.
-
- If unsure, select the this firmware.
-
- config B43_FW_6_30
- bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
- help
- Newer experimental firmware for BCM43xx devices.
-
- This firmware is mostly untested.
-
- If unsure, select the "stable" firmware.
-
- config B43_OPENFIRMWARE
- bool "Open FirmWare for WiFi networks"
- help
- Opensource firmware for BCM43xx devices.
-
- Do _not_ select this, unless you know what you are doing.
- The Opensource firmware is not suitable for embedded devices, yet.
- It does not support QoS, which is bad for AccessPoints.
- It does not support hardware crypto acceleration, which is a showstopper
- for embedded devices with low CPU resources.
-
- If unsure, select the "stable" firmware.
-
- endchoice
-
- config B43_FW_SQUASH
- bool "Remove unnecessary firmware files"
- depends on !B43_OPENFIRMWARE
- default y
- help
- This options allows you to remove unnecessary b43 firmware files
- from the final rootfs image. This can reduce the rootfs size by
- up to 200k.
-
- If unsure, say Y.
-
- config B43_FW_SQUASH_COREREVS
- string "Core revisions to include"
- depends on B43_FW_SQUASH
- default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
- default "16,28,29,30" if TARGET_brcm47xx_mips74k
- default "5,6,7,8,9,10,11,13,15,16,28,29,30"
- help
- This is a comma seperated list of core revision numbers.
-
- Example (keep files for rev5 only):
- 5
-
- Example (keep files for rev5 and rev11):
- 5,11
-
- config B43_FW_SQUASH_PHYTYPES
- string "PHY types to include"
- depends on B43_FW_SQUASH
- default "G,N,LP" if TARGET_brcm47xx_legacy
- default "N,HT" if TARGET_brcm47xx_mips74k
- default "G,N,LP,HT"
- help
- This is a comma seperated list of PHY types:
- A => A-PHY
- AG => Dual A-PHY G-PHY
- G => G-PHY
- LP => LP-PHY
- N => N-PHY
- HT => HT-PHY
- LCN => LCN-PHY
- LCN40 => LCN40-PHY
- AC => AC-PHY
-
- Example (keep files for G-PHY only):
- G
-
- Example (keep files for G-PHY and N-PHY):
- G,N
-
- choice
- prompt "Supported buses"
- default PACKAGE_B43_BUSES_BCMA_AND_SSB
- help
- This allows choosing buses that b43 should support.
-
- config PACKAGE_B43_BUSES_BCMA_AND_SSB
- depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
- bool "BCMA and SSB"
-
- config PACKAGE_B43_BUSES_BCMA
- depends on !TARGET_brcm47xx_legacy
- bool "BCMA only"
-
- config PACKAGE_B43_BUSES_SSB
- depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
- bool "SSB only"
-
- endchoice
-
- config PACKAGE_B43_DEBUG
- bool "Enable debug output and debugfs for b43"
- default n
- help
- Enable additional debug output and runtime sanity checks for b43
- and enables the debugfs interface.
-
- If unsure, say N.
-
- config PACKAGE_B43_PIO
- bool "Enable support for PIO transfer mode"
- default n
- help
- Enable support for using PIO instead of DMA. Unless you have DMA
- transfer problems you don't need this.
-
- If unsure, say N.
-
- config PACKAGE_B43_PHY_G
- bool "Enable support for G-PHYs"
- default n if TARGET_brcm47xx_mips74k
- default y
- help
- Enable support for G-PHY. This includes support for the following devices:
- PCI: BCM4306, BCM4311, BCM4318
- SoC: BCM5352E, BCM4712
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_N
- bool "Enable support for N-PHYs"
- default y
- help
- Enable support for N-PHY. This includes support for the following devices:
- PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
- SoC: BCM4716, BCM4717, BCM4718
-
- Currently only 11g speed is available.
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_LP
- bool "Enable support for LP-PHYs"
- default n if TARGET_brcm47xx_mips74k
- default y
- help
- Enable support for LP-PHY. This includes support for the following devices:
- PCI: BCM4312
- SoC: BCM5354
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_HT
- bool "Enable support for HT-PHYs"
- default n if TARGET_brcm47xx_legacy
- default y
- help
- Enable support for HT-PHY. This includes support for the following devices:
- PCI: BCM4331
-
- Currently only 11g speed is available.
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_LCN
- bool "Enable support for LCN-PHYs"
- depends on BROKEN
- default n
- help
- Currently broken.
-
- If unsure, say N.
-
- endif
-endef
-
-define KernelPackage/b43/description
-Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
-endef
-
-define KernelPackage/b43legacy
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom 43xx-legacy wireless support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
- KCONFIG:= \
- CONFIG_HW_RANDOM=y
- DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
- AUTOLOAD:=$(call AutoProbe,b43legacy)
- MENU:=1
-endef
-
-define KernelPackage/b43legacy/description
-Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
-endef
-
-
-define KernelPackage/brcmutil
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n common driver parts
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
- AUTOLOAD:=$(call AutoProbe,brcmutil)
- MENU:=1
-endef
-
-define KernelPackage/brcmutil/description
- This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
-endef
-
-define KernelPackage/brcmutil/config
- if PACKAGE_kmod-brcmutil
-
- config PACKAGE_BRCM80211_DEBUG
- bool "Broadcom wireless driver debugging"
- help
- Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
-
- endif
-endef
-
-PKG_BRCMSMAC_FW_NAME:=broadcom-wl
-PKG_BRCMSMAC_FW_VERSION:=5.100.138
-PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
-PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
-PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
-
-define Download/brcmsmac
- FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
- URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
- HASH:=$(PKG_BRCMSMAC_FW_HASH)
-endef
-$(eval $(call Download,brcmsmac))
-
-define KernelPackage/brcmsmac
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
- AUTOLOAD:=$(call AutoProbe,brcmsmac)
- MENU:=1
-endef
-
-define KernelPackage/brcmsmac/description
- Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
-endef
-
-define KernelPackage/brcmsmac/config
- if PACKAGE_kmod-brcmsmac
-
- config BRCMSMAC_USE_FW_FROM_WL
- bool "Use firmware extracted from broadcom proprietary driver"
- default y
- help
- Instead of using the official brcmsmac firmware a firmware
- version 666.2 extracted from the proprietary Broadcom driver
- is used. This is needed to get core rev 17 used in bcm4716
- to work.
-
- If unsure, say Y.
-
- endif
-endef
-
-
-define KernelPackage/brcmfmac
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \
- +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \
- +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
- AUTOLOAD:=$(call AutoProbe,brcmfmac)
-endef
-
-define KernelPackage/brcmfmac/description
- Kernel module for Broadcom IEEE802.11n USB Wireless cards
-endef
-
-define KernelPackage/brcmfmac/config
- if PACKAGE_kmod-brcmfmac
-
- config BRCMFMAC_SDIO
- bool "Enable SDIO bus interface support"
- default y if TARGET_brcm2708
- default y if TARGET_sunxi
- default n
- help
- Enable support for cards attached to an SDIO bus.
- Select this option only if you are sure that your
- board has a Broadcom wireless chip atacched to
- that bus.
-
- config BRCMFMAC_USB
- bool "Enable USB bus interface support"
- depends on USB_SUPPORT
- default y
- help
- Supported USB connected chipsets:
- BCM43235, BCM43236, BCM43238 (all in revision 3 only)
- BCM43143, BCM43242, BCM43566, BCM43569
-
- config BRCMFMAC_PCIE
- bool "Enable PCIE bus interface support"
- depends on PCI_SUPPORT
- default y
- help
- Supported PCIe connected chipsets:
- BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
-
- endif
-endef
-
-
define KernelPackage/hermes
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes 802.11b chipset support
config-$(call config_package,airo) += AIRO
-config-$(call config_package,b43) += B43
-config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
-config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
-config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB
-config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G
-config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N
-config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP
-config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT
-config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO
-config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG
-
-config-$(call config_package,b43legacy) += B43LEGACY
-config-y += B43LEGACY_DMA_MODE
-
-config-$(call config_package,brcmutil) += BRCMUTIL
-config-$(call config_package,brcmsmac) += BRCMSMAC
-config-$(call config_package,brcmfmac) += BRCMFMAC
-config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
-config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB
-config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
-config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
-
config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
config-$(call config_package,mt7601u) += MT7601U
config-y += WL_MEDIATEK
config-$(call config_package,rtl8xxxu) += RTL8XXXU
config-y += RTL8XXXU_UNTESTED
-config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS
+config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS
MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
$(KERNEL_MAKE_FLAGS) \
endif
endef
-define KernelPackage/brcmsmac/install
- $(INSTALL_DIR) $(1)/lib/firmware/brcm
-ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y)
- tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)"
- b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT)
-endif
-endef
-
define KernelPackage/cfg80211/install
$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
--- /dev/null
+PKG_DRIVERS += \
+ b43 b43legacy brcmsmac brcmfmac brcmutil
+
+PKG_CONFIG_DEPENDS += \
+ CONFIG_PACKAGE_B43_DEBUG \
+ CONFIG_PACKAGE_B43_PIO \
+ CONFIG_PACKAGE_B43_PHY_G \
+ CONFIG_PACKAGE_B43_PHY_N \
+ CONFIG_PACKAGE_B43_PHY_LP \
+ CONFIG_PACKAGE_B43_PHY_HT \
+ CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \
+ CONFIG_PACKAGE_B43_BUSES_BCMA \
+ CONFIG_PACKAGE_B43_BUSES_SSB \
+ CONFIG_PACKAGE_BRCM80211_DEBUG
+
+config-$(call config_package,b43) += B43
+config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
+config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
+config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB
+config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G
+config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N
+config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP
+config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT
+config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO
+config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG
+
+config-$(call config_package,b43legacy) += B43LEGACY
+config-y += B43LEGACY_DMA_MODE
+
+config-$(call config_package,brcmutil) += BRCMUTIL
+config-$(call config_package,brcmsmac) += BRCMSMAC
+config-$(call config_package,brcmfmac) += BRCMFMAC
+config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
+config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB
+config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
+config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
+
+config-$(CONFIG_LEDS_TRIGGERS) += B43_LEDS B43LEGACY_LEDS
+
+#Broadcom firmware
+ifneq ($(CONFIG_B43_FW_6_30),)
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=6.30.163.46
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
+ PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+ PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+ PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d
+else
+ifneq ($(CONFIG_B43_FW_5_10),)
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=5.10.56.27.3
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
+ PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
+ PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+ PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009
+else
+ifneq ($(CONFIG_B43_FW_4_178),)
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=4.178.10.4
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+ PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+ PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+ PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f
+else
+ifneq ($(CONFIG_B43_FW_5_100_138),)
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=5.100.138
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
+ PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+ PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+ PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
+else
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=4.150.10.5
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
+ PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+ PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+ PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533
+endif
+endif
+endif
+endif
+ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ PKG_B43_FWV4_NAME:=broadcom-wl
+ PKG_B43_FWV4_VERSION:=5.2
+ PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
+ PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
+ PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware
+ PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc
+endif
+
+
+define Download/b43
+ FILE:=$(PKG_B43_FWV4_SOURCE)
+ URL:=$(PKG_B43_FWV4_SOURCE_URL)
+ HASH:=$(PKG_B43_FWV4_HASH)
+endef
+$(eval $(call Download,b43))
+
+define KernelPackage/b43
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Broadcom 43xx wireless support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+ KCONFIG:= \
+ CONFIG_HW_RANDOM=y
+ # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
+ DEPENDS += \
+ @PCI_SUPPORT +kmod-mac80211 \
+ $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
+ $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
+ AUTOLOAD:=$(call AutoProbe,b43)
+ MENU:=1
+endef
+
+define KernelPackage/b43/config
+
+config PACKAGE_B43_USE_SSB
+ select PACKAGE_kmod-ssb
+ tristate
+ depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+ default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+ default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
+
+config PACKAGE_B43_USE_BCMA
+ select PACKAGE_kmod-bcma
+ tristate
+ depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+ default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
+ default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
+
+ if PACKAGE_kmod-b43
+
+ choice
+ prompt "b43 firmware version"
+ default B43_FW_5_100_138
+ help
+ This option allows you to select the version of the b43 firmware.
+
+ config B43_FW_4_150
+ bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
+ help
+ Old stable firmware for BCM43xx devices.
+
+ If unsure, select this.
+
+ config B43_FW_4_178
+ bool "Firmware 478.104 from driver 4.178.10.4"
+ help
+ Older firmware for BCM43xx devices.
+
+ If unsure, select the "stable" firmware.
+
+ config B43_FW_5_10
+ bool "Firmware 508.1084 from driver 5.10.56.27"
+ help
+ Older firmware for BCM43xx devices.
+
+ If unsure, select the "stable" firmware.
+
+ config B43_FW_5_100_138
+ bool "Firmware 666.2 from driver 5.100.138 (stable)"
+ help
+ The currently default firmware for BCM43xx devices.
+
+ This firmware currently gets most of the testing and is needed for some N-PHY devices.
+
+ If unsure, select the this firmware.
+
+ config B43_FW_6_30
+ bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
+ help
+ Newer experimental firmware for BCM43xx devices.
+
+ This firmware is mostly untested.
+
+ If unsure, select the "stable" firmware.
+
+ config B43_OPENFIRMWARE
+ bool "Open FirmWare for WiFi networks"
+ help
+ Opensource firmware for BCM43xx devices.
+
+ Do _not_ select this, unless you know what you are doing.
+ The Opensource firmware is not suitable for embedded devices, yet.
+ It does not support QoS, which is bad for AccessPoints.
+ It does not support hardware crypto acceleration, which is a showstopper
+ for embedded devices with low CPU resources.
+
+ If unsure, select the "stable" firmware.
+
+ endchoice
+
+ config B43_FW_SQUASH
+ bool "Remove unnecessary firmware files"
+ depends on !B43_OPENFIRMWARE
+ default y
+ help
+ This options allows you to remove unnecessary b43 firmware files
+ from the final rootfs image. This can reduce the rootfs size by
+ up to 200k.
+
+ If unsure, say Y.
+
+ config B43_FW_SQUASH_COREREVS
+ string "Core revisions to include"
+ depends on B43_FW_SQUASH
+ default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
+ default "16,28,29,30" if TARGET_brcm47xx_mips74k
+ default "5,6,7,8,9,10,11,13,15,16,28,29,30"
+ help
+ This is a comma seperated list of core revision numbers.
+
+ Example (keep files for rev5 only):
+ 5
+
+ Example (keep files for rev5 and rev11):
+ 5,11
+
+ config B43_FW_SQUASH_PHYTYPES
+ string "PHY types to include"
+ depends on B43_FW_SQUASH
+ default "G,N,LP" if TARGET_brcm47xx_legacy
+ default "N,HT" if TARGET_brcm47xx_mips74k
+ default "G,N,LP,HT"
+ help
+ This is a comma seperated list of PHY types:
+ A => A-PHY
+ AG => Dual A-PHY G-PHY
+ G => G-PHY
+ LP => LP-PHY
+ N => N-PHY
+ HT => HT-PHY
+ LCN => LCN-PHY
+ LCN40 => LCN40-PHY
+ AC => AC-PHY
+
+ Example (keep files for G-PHY only):
+ G
+
+ Example (keep files for G-PHY and N-PHY):
+ G,N
+
+ choice
+ prompt "Supported buses"
+ default PACKAGE_B43_BUSES_BCMA_AND_SSB
+ help
+ This allows choosing buses that b43 should support.
+
+ config PACKAGE_B43_BUSES_BCMA_AND_SSB
+ depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+ bool "BCMA and SSB"
+
+ config PACKAGE_B43_BUSES_BCMA
+ depends on !TARGET_brcm47xx_legacy
+ bool "BCMA only"
+
+ config PACKAGE_B43_BUSES_SSB
+ depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+ bool "SSB only"
+
+ endchoice
+
+ config PACKAGE_B43_DEBUG
+ bool "Enable debug output and debugfs for b43"
+ default n
+ help
+ Enable additional debug output and runtime sanity checks for b43
+ and enables the debugfs interface.
+
+ If unsure, say N.
+
+ config PACKAGE_B43_PIO
+ bool "Enable support for PIO transfer mode"
+ default n
+ help
+ Enable support for using PIO instead of DMA. Unless you have DMA
+ transfer problems you don't need this.
+
+ If unsure, say N.
+
+ config PACKAGE_B43_PHY_G
+ bool "Enable support for G-PHYs"
+ default n if TARGET_brcm47xx_mips74k
+ default y
+ help
+ Enable support for G-PHY. This includes support for the following devices:
+ PCI: BCM4306, BCM4311, BCM4318
+ SoC: BCM5352E, BCM4712
+
+ If unsure, say Y.
+
+ config PACKAGE_B43_PHY_N
+ bool "Enable support for N-PHYs"
+ default y
+ help
+ Enable support for N-PHY. This includes support for the following devices:
+ PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
+ SoC: BCM4716, BCM4717, BCM4718
+
+ Currently only 11g speed is available.
+
+ If unsure, say Y.
+
+ config PACKAGE_B43_PHY_LP
+ bool "Enable support for LP-PHYs"
+ default n if TARGET_brcm47xx_mips74k
+ default y
+ help
+ Enable support for LP-PHY. This includes support for the following devices:
+ PCI: BCM4312
+ SoC: BCM5354
+
+ If unsure, say Y.
+
+ config PACKAGE_B43_PHY_HT
+ bool "Enable support for HT-PHYs"
+ default n if TARGET_brcm47xx_legacy
+ default y
+ help
+ Enable support for HT-PHY. This includes support for the following devices:
+ PCI: BCM4331
+
+ Currently only 11g speed is available.
+
+ If unsure, say Y.
+
+ config PACKAGE_B43_PHY_LCN
+ bool "Enable support for LCN-PHYs"
+ depends on BROKEN
+ default n
+ help
+ Currently broken.
+
+ If unsure, say N.
+
+ endif
+endef
+
+define KernelPackage/b43/description
+Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
+endef
+
+define KernelPackage/b43legacy
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Broadcom 43xx-legacy wireless support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
+ KCONFIG:= \
+ CONFIG_HW_RANDOM=y
+ DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
+ AUTOLOAD:=$(call AutoProbe,b43legacy)
+ MENU:=1
+endef
+
+define KernelPackage/b43legacy/description
+Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
+endef
+
+
+define KernelPackage/brcmutil
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Broadcom IEEE802.11n common driver parts
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+ DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
+ AUTOLOAD:=$(call AutoProbe,brcmutil)
+ MENU:=1
+endef
+
+define KernelPackage/brcmutil/description
+ This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
+endef
+
+define KernelPackage/brcmutil/config
+ if PACKAGE_kmod-brcmutil
+
+ config PACKAGE_BRCM80211_DEBUG
+ bool "Broadcom wireless driver debugging"
+ help
+ Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
+
+ endif
+endef
+
+PKG_BRCMSMAC_FW_NAME:=broadcom-wl
+PKG_BRCMSMAC_FW_VERSION:=5.100.138
+PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
+PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
+PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
+PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
+
+define Download/brcmsmac
+ FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
+ URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
+ HASH:=$(PKG_BRCMSMAC_FW_HASH)
+endef
+$(eval $(call Download,brcmsmac))
+
+define KernelPackage/brcmsmac
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+ DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
+ AUTOLOAD:=$(call AutoProbe,brcmsmac)
+ MENU:=1
+endef
+
+define KernelPackage/brcmsmac/description
+ Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
+endef
+
+define KernelPackage/brcmsmac/config
+ if PACKAGE_kmod-brcmsmac
+
+ config BRCMSMAC_USE_FW_FROM_WL
+ bool "Use firmware extracted from broadcom proprietary driver"
+ default y
+ help
+ Instead of using the official brcmsmac firmware a firmware
+ version 666.2 extracted from the proprietary Broadcom driver
+ is used. This is needed to get core rev 17 used in bcm4716
+ to work.
+
+ If unsure, say Y.
+
+ endif
+endef
+
+
+define KernelPackage/brcmfmac
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
+ DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \
+ +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \
+ +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
+ AUTOLOAD:=$(call AutoProbe,brcmfmac)
+endef
+
+define KernelPackage/brcmfmac/description
+ Kernel module for Broadcom IEEE802.11n USB Wireless cards
+endef
+
+define KernelPackage/brcmfmac/config
+ if PACKAGE_kmod-brcmfmac
+
+ config BRCMFMAC_SDIO
+ bool "Enable SDIO bus interface support"
+ default y if TARGET_brcm2708
+ default y if TARGET_sunxi
+ default n
+ help
+ Enable support for cards attached to an SDIO bus.
+ Select this option only if you are sure that your
+ board has a Broadcom wireless chip atacched to
+ that bus.
+
+ config BRCMFMAC_USB
+ bool "Enable USB bus interface support"
+ depends on USB_SUPPORT
+ default y
+ help
+ Supported USB connected chipsets:
+ BCM43235, BCM43236, BCM43238 (all in revision 3 only)
+ BCM43143, BCM43242, BCM43566, BCM43569
+
+ config BRCMFMAC_PCIE
+ bool "Enable PCIE bus interface support"
+ depends on PCI_SUPPORT
+ default y
+ help
+ Supported PCIe connected chipsets:
+ BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
+
+ endif
+endef
+
+define KernelPackage/brcmsmac/install
+ $(INSTALL_DIR) $(1)/lib/firmware/brcm
+ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y)
+ tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)"
+ b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT)
+endif
+endef
projects / openwrt / openwrt.git / commitdiff