mac80211: add ath11k PCI support
authorRobert Marko <robimarko@gmail.com>
Sun, 6 Feb 2022 14:50:24 +0000 (15:50 +0100)
committerChristian Marangi <ansuelsmth@gmail.com>
Mon, 19 Dec 2022 00:01:57 +0000 (01:01 +0100)
ath11k is the upstream driver for Qualcomm 802.11ax radios, both for the
internal AHB and PCI based cards.
This commit does however only provide PCI support while AHB will follow
but its SoC specific so it will require an OpenWrt target first.

It differs a bit from ath10k as it requires stuff like QRTR, MHI and QMI
helpers.

PCI variant requires qrtr-mhi and mhi-bus which backports do provide,
however we are dropping those in a patch as they will conflict with
support for the AHB variant as that one requires qrtr-smd which in turn
requires RPMSG and GLINK and its not feasable to provide those in
backports as they are really SoC specific.

QRTR and MHI in kernel 5.10 are not usable and backporting the changes
is not easy as they have changed drastically from 5.10 to 5.15 ath11k will
only be available on targets that use kernel 5.15.

Signed-off-by: Robert Marko <robimarko@gmail.com>
20 files changed:
package/kernel/mac80211/Makefile
package/kernel/mac80211/ath.mk
package/kernel/mac80211/patches/ath11k/0001-wifi-ath11k-stop-tx-queues-immediately-upon-firmware.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0002-wifi-ath11k-Don-t-exit-on-wakeup-failure.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0003-wifi-ath11k-fix-warning-in-dma_free_coherent-of-memo.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0005-wifi-ath11k-Fix-spelling-mistake-chnange-change.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0006-wifi-ath11k-fix-firmware-assert-during-bandwidth-cha.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0007-wifi-ath11k-suppress-add-interface-error.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0008-wifi-ath11k-add-support-to-configure-channel-dwell-t.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0009-wifi-ath11k-Send-PME-message-during-wakeup-from-D3co.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0010-wifi-ath11k-Fix-firmware-crash-on-vdev-delete-race-c.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0011-wifi-ath11k-fix-monitor-vdev-creation-with-firmware-.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0012-wifi-ath11k-Fix-qmi_msg_handler-data-structure-initi.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0013-wifi-ath11k-synchronize-ath11k_mac_he_gi_to_nl80211_.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0016-wifi-ath11k-Make-QMI-message-rules-const.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0017-wifi-ath11k-Trigger-sta-disconnect-on-hardware-resta.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/0018-wifi-ath11k-Fix-race-condition-with-struct-htt_ppdu_.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/900-ath11k-control-thermal-support-via-symbol.patch [new file with mode: 0644]
package/kernel/mac80211/patches/ath11k/901-wifi-ath11k-pci-fix-compilation-in-5.16-and-older.patch [new file with mode: 0644]
package/kernel/mac80211/patches/build/100-backports-drop-QRTR-and-MHI.patch [new file with mode: 0644]

index 58f07e1eeb2154be0221dc6e8a2d172ae0bb1f00..1344b9f8e2c1fd8862dcd2de1724d0450ea35671 100644 (file)
@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=mac80211
 
 PKG_VERSION:=6.1-rc8
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 # PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.15.58/
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
 PKG_HASH:=7f3d96c2573183cd79d6a3ebe5e1b7b73c19d1326d443c85b69c4181f14e6e2b
@@ -307,6 +307,7 @@ define Build/Prepare
                $(PKG_BUILD_DIR)/include/linux/crc8.h \
                $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \
                $(PKG_BUILD_DIR)/include/linux/wl12xx.h \
+               $(PKG_BUILD_DIR)/include/linux/mhi.h \
                $(PKG_BUILD_DIR)/include/net/ieee80211.h \
                $(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h
 
index af8c3b93d3cd80eaf0885fb14769de660bccffa1..83228311cc4514b869a98c921c1a40a4de5dee81 100644 (file)
@@ -1,6 +1,6 @@
 PKG_DRIVERS += \
        ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k ath10k-smallbuffers \
-       carl9170 owl-loader ar5523 wil6210
+       ath11k ath11k-pci carl9170 owl-loader ar5523 wil6210
 
 PKG_CONFIG_DEPENDS += \
        CONFIG_PACKAGE_ATH_DEBUG \
@@ -12,6 +12,7 @@ PKG_CONFIG_DEPENDS += \
        CONFIG_ATH9K_TX99 \
        CONFIG_ATH10K_LEDS \
        CONFIG_ATH10K_THERMAL \
+       CONFIG_ATH11K_THERMAL \
        CONFIG_ATH_USER_REGD
 
 ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
@@ -19,6 +20,7 @@ ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
        ATH9K_DEBUGFS \
        ATH9K_HTC_DEBUGFS \
        ATH10K_DEBUGFS \
+       ATH11K_DEBUGFS \
        CARL9170_DEBUGFS \
        ATH5K_DEBUG \
        ATH6KL_DEBUG \
@@ -28,6 +30,7 @@ endif
 ifdef CONFIG_PACKAGE_MAC80211_TRACING
   config-y += \
        ATH10K_TRACING \
+       ATH11K_TRACING \
        ATH6KL_TRACING \
        ATH_TRACEPOINTS \
        ATH5K_TRACER \
@@ -35,9 +38,9 @@ ifdef CONFIG_PACKAGE_MAC80211_TRACING
 endif
 
 config-$(call config_package,ath) += ATH_CARDS ATH_COMMON
-config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS
+config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH11K_DEBUG ATH9K_STATION_STATISTICS
 config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
-config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL
+config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL ATH11K_SPECTRAL
 config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK
 config-$(call config_package,ath9k) += ATH9K
 config-$(call config_package,ath9k-common) += ATH9K_COMMON
@@ -52,10 +55,13 @@ config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99
 config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR
 config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS
 config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
+config-$(CONFIG_ATH11K_THERMAL) += ATH11K_THERMAL
 
 config-$(call config_package,ath9k-htc) += ATH9K_HTC
 config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
 config-$(call config_package,ath10k-smallbuffers) += ATH10K ATH10K_PCI ATH10K_SMALLBUFFERS
+config-$(call config_package,ath11k) += ATH11K
+config-$(call config_package,ath11k-pci) += ATH11K_PCI
 
 config-$(call config_package,ath5k) += ATH5K
 ifdef CONFIG_TARGET_ath25
@@ -290,6 +296,43 @@ define KernelPackage/ath10k-smallbuffers
   VARIANT:=smallbuffers
 endef
 
+define KernelPackage/ath11k
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Qualcomm 802.11ax wireless chipset support (common code)
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath11k
+  DEPENDS+= +kmod-ath +@DRIVER_11AC_SUPPORT +@DRIVER_11AX_SUPPORT \
+  +kmod-crypto-michael-mic +ATH11K_THERMAL:kmod-hwmon-core +ATH11K_THERMAL:kmod-thermal
+  FILES:=$(PKG_BUILD_DIR)/drivers/soc/qcom/qmi_helpers.ko \
+  $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath11k/ath11k.ko
+endef
+
+define KernelPackage/ath11k/description
+This module adds support for Qualcomm Technologies 802.11ax family of
+chipsets.
+endef
+
+define KernelPackage/ath11k/config
+
+       config ATH11K_THERMAL
+               bool "Enable thermal sensors and throttling support"
+               depends on PACKAGE_kmod-ath11k
+
+endef
+
+define KernelPackage/ath11k-pci
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Qualcomm 802.11ax PCI wireless chipset support
+  URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath11k
+  DEPENDS+= @PCI_SUPPORT +kmod-qrtr-mhi +kmod-ath11k
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath11k/ath11k_pci.ko
+  AUTOLOAD:=$(call AutoProbe,ath11k_pci)
+endef
+
+define KernelPackage/ath11k-pci/description
+This module adds support for Qualcomm Technologies 802.11ax family of
+chipsets with PCI bus.
+endef
+
 define KernelPackage/carl9170
   $(call KernelPackage/mac80211/Default)
   TITLE:=Driver for Atheros AR9170 USB sticks
diff --git a/package/kernel/mac80211/patches/ath11k/0001-wifi-ath11k-stop-tx-queues-immediately-upon-firmware.patch b/package/kernel/mac80211/patches/ath11k/0001-wifi-ath11k-stop-tx-queues-immediately-upon-firmware.patch
new file mode 100644 (file)
index 0000000..ae8920c
--- /dev/null
@@ -0,0 +1,78 @@
+From 81e60b2dfb2744ab6642c4aa62534b4f711fdc5d Mon Sep 17 00:00:00 2001
+From: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Date: Tue, 27 Sep 2022 09:18:54 +0300
+Subject: [PATCH] wifi: ath11k: stop tx queues immediately upon firmware exit
+
+Currently, recovery flag is set immediately upon firmware
+exit but tx queues are stopped once firmware arrives back
+and is ready which is during ath11k_core_restart. Once
+ieee80211 hw restart is completed, tx queues are resumed.
+If during the time delta between firmware exit and firmware
+ready, mac80211 send packets, currently ath11k will drop it
+since recovery flag will be set. But warning prints will
+come -
+  "ath11k c000000.wifi: failed to transmit frame -108"
+
+If more tx packets are there, this could lead to flooding
+of above print.
+
+However, actually tx queues should be stopped immediately
+when firmware leaves. This will prevent packets to get
+dropped when firmware is recovering.
+
+Add fix to stop tx queues immediately after firmware exit.
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/core.c | 5 +----
+ drivers/net/wireless/ath/ath11k/core.h | 1 +
+ drivers/net/wireless/ath/ath11k/qmi.c  | 3 +++
+ 3 files changed, 5 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -1641,7 +1641,7 @@ static void ath11k_update_11d(struct wor
+       }
+ }
+-static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
++void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
+ {
+       struct ath11k *ar;
+       struct ath11k_pdev *pdev;
+@@ -1730,9 +1730,6 @@ static void ath11k_core_restart(struct w
+       struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work);
+       int ret;
+-      if (!ab->is_reset)
+-              ath11k_core_pre_reconfigure_recovery(ab);
+-
+       ret = ath11k_core_reconfigure_on_crash(ab);
+       if (ret) {
+               ath11k_err(ab, "failed to reconfigure driver on crash recovery\n");
+--- a/drivers/net/wireless/ath/ath11k/core.h
++++ b/drivers/net/wireless/ath/ath11k/core.h
+@@ -1157,6 +1157,7 @@ int ath11k_core_check_smbios(struct ath1
+ void ath11k_core_halt(struct ath11k *ar);
+ int ath11k_core_resume(struct ath11k_base *ab);
+ int ath11k_core_suspend(struct ath11k_base *ab);
++void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab);
+ const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
+                                                   const char *filename);
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -3158,6 +3158,9 @@ static void ath11k_qmi_driver_event_work
+               case ATH11K_QMI_EVENT_SERVER_EXIT:
+                       set_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags);
+                       set_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags);
++
++                      if (!ab->is_reset)
++                              ath11k_core_pre_reconfigure_recovery(ab);
+                       break;
+               case ATH11K_QMI_EVENT_REQUEST_MEM:
+                       ret = ath11k_qmi_event_mem_request(qmi);
diff --git a/package/kernel/mac80211/patches/ath11k/0002-wifi-ath11k-Don-t-exit-on-wakeup-failure.patch b/package/kernel/mac80211/patches/ath11k/0002-wifi-ath11k-Don-t-exit-on-wakeup-failure.patch
new file mode 100644 (file)
index 0000000..47385e0
--- /dev/null
@@ -0,0 +1,45 @@
+From 45d2e268369b0c768d5a644f319758bcfd370521 Mon Sep 17 00:00:00 2001
+From: Baochen Qiang <quic_bqiang@quicinc.com>
+Date: Wed, 28 Sep 2022 09:51:40 +0800
+Subject: [PATCH] wifi: ath11k: Don't exit on wakeup failure
+
+Currently, ath11k_pcic_read() returns an error if wakeup()
+fails, this makes firmware crash debug quite hard because we can
+get nothing.
+
+Change to go ahead on wakeup failure, in that case we still may
+get something valid to check. There should be no mislead due
+to incorrect content because we are aware of the failure with the
+log printed.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
+
+Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20220928015140.5431-1-quic_bqiang@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/pcic.c | 13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/pcic.c
++++ b/drivers/net/wireless/ath/ath11k/pcic.c
+@@ -218,9 +218,16 @@ int ath11k_pcic_read(struct ath11k_base
+       if (wakeup_required && ab->pci.ops->wakeup) {
+               ret = ab->pci.ops->wakeup(ab);
+               if (ret) {
+-                      ath11k_warn(ab, "failed to wakeup for read from 0x%x: %d\n",
+-                                  start, ret);
+-                      return ret;
++                      ath11k_warn(ab,
++                                  "wakeup failed, data may be invalid: %d",
++                                  ret);
++                      /* Even though wakeup() failed, continue processing rather
++                       * than returning because some parts of the data may still
++                       * be valid and useful in some cases, e.g. could give us
++                       * some clues on firmware crash.
++                       * Mislead due to invalid data could be avoided because we
++                       * are aware of the wakeup failure.
++                       */
+               }
+       }
diff --git a/package/kernel/mac80211/patches/ath11k/0003-wifi-ath11k-fix-warning-in-dma_free_coherent-of-memo.patch b/package/kernel/mac80211/patches/ath11k/0003-wifi-ath11k-fix-warning-in-dma_free_coherent-of-memo.patch
new file mode 100644 (file)
index 0000000..661f4bb
--- /dev/null
@@ -0,0 +1,139 @@
+From f74878433d5ade360447da5d92e9c2e535780d80 Mon Sep 17 00:00:00 2001
+From: Wen Gong <quic_wgong@quicinc.com>
+Date: Wed, 28 Sep 2022 03:38:32 -0400
+Subject: [PATCH] wifi: ath11k: fix warning in dma_free_coherent() of memory
+ chunks while recovery
+
+Commit 26f3a021b37c ("ath11k: allocate smaller chunks of memory for
+firmware") and commit f6f92968e1e5 ("ath11k: qmi: try to allocate a
+big block of DMA memory first") change ath11k to allocate the memory
+chunks for target twice while wlan load. It fails for the 1st time
+because of large memory and then changed to allocate many small chunks
+for the 2nd time sometimes as below log.
+
+1st time failed:
+[10411.640620] ath11k_pci 0000:05:00.0: qmi firmware request memory request
+[10411.640625] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 6881280
+[10411.640630] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 3784704
+[10411.640658] ath11k_pci 0000:05:00.0: qmi dma allocation failed (6881280 B type 1), will try later with small size
+[10411.640671] ath11k_pci 0000:05:00.0: qmi delays mem_request 2
+[10411.640677] ath11k_pci 0000:05:00.0: qmi respond memory request delayed 1
+2nd time success:
+[10411.642004] ath11k_pci 0000:05:00.0: qmi firmware request memory request
+[10411.642008] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642012] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642014] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642016] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642018] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642020] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642022] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642024] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642027] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642029] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+[10411.642031] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 458752
+[10411.642033] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 131072
+[10411.642035] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642037] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642039] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642041] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642043] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642045] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288
+[10411.642047] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 491520
+[10411.642049] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288
+
+And then commit 5962f370ce41 ("ath11k: Reuse the available memory after
+firmware reload") skip the ath11k_qmi_free_resource() which frees the
+memory chunks while recovery, after that, when run recovery test on
+WCN6855, a warning happened every time as below and finally leads fail
+for recovery.
+
+[  159.570318] BUG: Bad page state in process kworker/u16:5  pfn:33300
+[  159.570320] page:0000000096ffdbb9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33300
+[  159.570324] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
+[  159.570329] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000
+[  159.570332] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
+[  159.570334] page dumped because: nonzero _refcount
+[  159.570440]  firewire_ohci syscopyarea sysfillrect psmouse sdhci_pci ahci sysimgblt firewire_core fb_sys_fops libahci crc_itu_t cqhci drm sdhci e1000e wmi video
+[  159.570460] CPU: 2 PID: 217 Comm: kworker/u16:5 Kdump: loaded Tainted: G    B             5.19.0-rc1-wt-ath+ #3
+[  159.570465] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
+[  159.570467] Workqueue: qmi_msg_handler qmi_data_ready_work [qmi_helpers]
+[  159.570475] Call Trace:
+[  159.570476]  <TASK>
+[  159.570478]  dump_stack_lvl+0x49/0x5f
+[  159.570486]  dump_stack+0x10/0x12
+[  159.570493]  bad_page+0xab/0xf0
+[  159.570502]  check_free_page_bad+0x66/0x70
+[  159.570511]  __free_pages_ok+0x530/0x9a0
+[  159.570517]  ? __dev_printk+0x58/0x6b
+[  159.570525]  ? _dev_printk+0x56/0x72
+[  159.570534]  ? qmi_decode+0x119/0x470 [qmi_helpers]
+[  159.570543]  __free_pages+0x91/0xd0
+[  159.570548]  dma_free_contiguous+0x50/0x60
+[  159.570556]  dma_direct_free+0xe5/0x140
+[  159.570564]  dma_free_attrs+0x35/0x50
+[  159.570570]  ath11k_qmi_msg_mem_request_cb+0x2ae/0x3c0 [ath11k]
+[  159.570620]  qmi_invoke_handler+0xac/0xe0 [qmi_helpers]
+[  159.570630]  qmi_handle_message+0x6d/0x180 [qmi_helpers]
+[  159.570643]  qmi_data_ready_work+0x2ca/0x440 [qmi_helpers]
+[  159.570656]  process_one_work+0x227/0x440
+[  159.570667]  worker_thread+0x31/0x3d0
+[  159.570676]  ? process_one_work+0x440/0x440
+[  159.570685]  kthread+0xfe/0x130
+[  159.570692]  ? kthread_complete_and_exit+0x20/0x20
+[  159.570701]  ret_from_fork+0x22/0x30
+[  159.570712]  </TASK>
+
+The reason is because when wlan start to recovery, the type, size and
+count is not same for the 1st and 2nd QMI_WLFW_REQUEST_MEM_IND message,
+Then it leads the parameter size is not correct for the dma_free_coherent().
+For the chunk[1], the actual dma size is 524288 which allocate in the
+2nd time of the initial wlan load phase, and the size which pass to
+dma_free_coherent() is 3784704 which is got in the 1st time of recovery
+phase, then warning above happened.
+
+Change to use prev_size of struct target_mem_chunk for the paramter of
+dma_free_coherent() since prev_size is the real size of last load/recovery.
+Also change to check both type and size of struct target_mem_chunk to
+reuse the memory to avoid mismatch buffer size for target. Then the
+warning disappear and recovery success. When the 1st QMI_WLFW_REQUEST_MEM_IND
+for recovery arrived, the trunk[0] is freed in ath11k_qmi_alloc_target_mem_chunk()
+and then dma_alloc_coherent() failed caused by large size, and then
+trunk[1] is freed in ath11k_qmi_free_target_mem_chunk(), the left 18
+trunks will be reuse for the 2nd QMI_WLFW_REQUEST_MEM_IND message.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
+
+Fixes: 5962f370ce41 ("ath11k: Reuse the available memory after firmware reload")
+Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20220928073832.16251-1-quic_wgong@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -1961,7 +1961,7 @@ static void ath11k_qmi_free_target_mem_c
+                       continue;
+               dma_free_coherent(ab->dev,
+-                                ab->qmi.target_mem[i].size,
++                                ab->qmi.target_mem[i].prev_size,
+                                 ab->qmi.target_mem[i].vaddr,
+                                 ab->qmi.target_mem[i].paddr);
+               ab->qmi.target_mem[i].vaddr = NULL;
+@@ -1982,12 +1982,12 @@ static int ath11k_qmi_alloc_target_mem_c
+                * in such case, no need to allocate memory for FW again.
+                */
+               if (chunk->vaddr) {
+-                      if (chunk->prev_type == chunk->type ||
++                      if (chunk->prev_type == chunk->type &&
+                           chunk->prev_size == chunk->size)
+                               continue;
+                       /* cannot reuse the existing chunk */
+-                      dma_free_coherent(ab->dev, chunk->size,
++                      dma_free_coherent(ab->dev, chunk->prev_size,
+                                         chunk->vaddr, chunk->paddr);
+                       chunk->vaddr = NULL;
+               }
diff --git a/package/kernel/mac80211/patches/ath11k/0005-wifi-ath11k-Fix-spelling-mistake-chnange-change.patch b/package/kernel/mac80211/patches/ath11k/0005-wifi-ath11k-Fix-spelling-mistake-chnange-change.patch
new file mode 100644 (file)
index 0000000..4b52252
--- /dev/null
@@ -0,0 +1,25 @@
+From a797f479bf3e02c6d179c2e6aeace7f9b22b0acd Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.i.king@gmail.com>
+Date: Wed, 28 Sep 2022 15:38:34 +0100
+Subject: [PATCH] wifi: ath11k: Fix spelling mistake "chnange" -> "change"
+
+There is a spelling mistake in an ath11k_dbg debug message. Fix it.
+
+Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20220928143834.35189-1-colin.i.king@gmail.com
+---
+ drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -6829,7 +6829,7 @@ static void ath11k_wmi_event_peer_sta_ps
+       }
+       ath11k_dbg(ab, ATH11K_DBG_WMI,
+-                 "peer sta ps chnange ev addr %pM state %u sup_bitmap %x ps_valid %u ts %u\n",
++                 "peer sta ps change ev addr %pM state %u sup_bitmap %x ps_valid %u ts %u\n",
+                  ev->peer_macaddr.addr, ev->peer_ps_state,
+                  ev->ps_supported_bitmap, ev->peer_ps_valid,
+                  ev->peer_ps_timestamp);
diff --git a/package/kernel/mac80211/patches/ath11k/0006-wifi-ath11k-fix-firmware-assert-during-bandwidth-cha.patch b/package/kernel/mac80211/patches/ath11k/0006-wifi-ath11k-fix-firmware-assert-during-bandwidth-cha.patch
new file mode 100644 (file)
index 0000000..f4fedb4
--- /dev/null
@@ -0,0 +1,225 @@
+From 3ff51d7416ee1ea2d771051a0ffa1ec8be054768 Mon Sep 17 00:00:00 2001
+From: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Date: Wed, 5 Oct 2022 15:24:30 +0530
+Subject: [PATCH 6/9] wifi: ath11k: fix firmware assert during bandwidth change
+ for peer sta
+
+Currently, ath11k sends peer assoc command for each peer to
+firmware when bandwidth changes. Peer assoc command is a
+bulky command and if many clients are connected, this could
+lead to firmware buffer getting overflowed leading to a firmware
+assert.
+
+However, during bandwidth change, only phymode and bandwidth
+also can be updated by WMI set peer param command. This makes
+the overall command light when compared to peer assoc and for
+multi-client cases, firmware buffer overflow also does not
+occur.
+
+Remove sending peer assoc command during sta bandwidth change
+and instead add sending WMI set peer param command for phymode
+and bandwidth.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
+
+Fixes: f187fe8e3bc65 ("ath11k: fix firmware crash during channel switch")
+Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221005095430.19890-1-quic_adisi@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/core.h |   2 +
+ drivers/net/wireless/ath/ath11k/mac.c  | 122 +++++++++++++++++--------
+ 2 files changed, 87 insertions(+), 37 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/core.h
++++ b/drivers/net/wireless/ath/ath11k/core.h
+@@ -505,6 +505,8 @@ struct ath11k_sta {
+       u64 ps_start_jiffies;
+       u64 ps_total_duration;
+       bool peer_current_ps_valid;
++
++      u32 bw_prev;
+ };
+ #define ATH11K_MIN_5G_FREQ 4150
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -4215,10 +4215,11 @@ static void ath11k_sta_rc_update_wk(stru
+       const u8 *ht_mcs_mask;
+       const u16 *vht_mcs_mask;
+       const u16 *he_mcs_mask;
+-      u32 changed, bw, nss, smps;
++      u32 changed, bw, nss, smps, bw_prev;
+       int err, num_vht_rates, num_he_rates;
+       const struct cfg80211_bitrate_mask *mask;
+       struct peer_assoc_params peer_arg;
++      enum wmi_phy_mode peer_phymode;
+       arsta = container_of(wk, struct ath11k_sta, update_wk);
+       sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+@@ -4239,6 +4240,7 @@ static void ath11k_sta_rc_update_wk(stru
+       arsta->changed = 0;
+       bw = arsta->bw;
++      bw_prev = arsta->bw_prev;
+       nss = arsta->nss;
+       smps = arsta->smps;
+@@ -4252,26 +4254,57 @@ static void ath11k_sta_rc_update_wk(stru
+                          ath11k_mac_max_he_nss(he_mcs_mask)));
+       if (changed & IEEE80211_RC_BW_CHANGED) {
+-              /* Send peer assoc command before set peer bandwidth param to
+-               * avoid the mismatch between the peer phymode and the peer
+-               * bandwidth.
+-               */
+-              ath11k_peer_assoc_prepare(ar, arvif->vif, sta, &peer_arg, true);
++              /* Get the peer phymode */
++              ath11k_peer_assoc_h_phymode(ar, arvif->vif, sta, &peer_arg);
++              peer_phymode = peer_arg.peer_phymode;
++
++              ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n",
++                         sta->addr, bw, peer_phymode);
++
++              if (bw > bw_prev) {
++                      /* BW is upgraded. In this case we send WMI_PEER_PHYMODE
++                       * followed by WMI_PEER_CHWIDTH
++                       */
++                      ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac BW upgrade for sta %pM new BW %d, old BW %d\n",
++                                 sta->addr, bw, bw_prev);
++
++                      err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id,
++                                                      WMI_PEER_PHYMODE, peer_phymode);
++
++                      if (err) {
++                              ath11k_warn(ar->ab, "failed to update STA %pM peer phymode %d: %d\n",
++                                          sta->addr, peer_phymode, err);
++                              goto err_rc_bw_changed;
++                      }
+-              peer_arg.is_assoc = false;
+-              err = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
+-              if (err) {
+-                      ath11k_warn(ar->ab, "failed to send peer assoc for STA %pM vdev %i: %d\n",
+-                                  sta->addr, arvif->vdev_id, err);
+-              } else if (wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) {
+                       err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id,
+                                                       WMI_PEER_CHWIDTH, bw);
++
+                       if (err)
+                               ath11k_warn(ar->ab, "failed to update STA %pM peer bw %d: %d\n",
+                                           sta->addr, bw, err);
+               } else {
+-                      ath11k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n",
+-                                  sta->addr, arvif->vdev_id);
++                      /* BW is downgraded. In this case we send WMI_PEER_CHWIDTH
++                       * followed by WMI_PEER_PHYMODE
++                       */
++                      ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac BW downgrade for sta %pM new BW %d,old BW %d\n",
++                                 sta->addr, bw, bw_prev);
++
++                      err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id,
++                                                      WMI_PEER_CHWIDTH, bw);
++
++                      if (err) {
++                              ath11k_warn(ar->ab, "failed to update STA %pM peer bw %d: %d\n",
++                                          sta->addr, bw, err);
++                              goto err_rc_bw_changed;
++                      }
++
++                      err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id,
++                                                      WMI_PEER_PHYMODE, peer_phymode);
++
++                      if (err)
++                              ath11k_warn(ar->ab, "failed to update STA %pM peer phymode %d: %d\n",
++                                          sta->addr, peer_phymode, err);
+               }
+       }
+@@ -4352,6 +4385,7 @@ static void ath11k_sta_rc_update_wk(stru
+               }
+       }
++err_rc_bw_changed:
+       mutex_unlock(&ar->conf_mutex);
+ }
+@@ -4505,6 +4539,34 @@ exit:
+       return ret;
+ }
++static u32 ath11k_mac_ieee80211_sta_bw_to_wmi(struct ath11k *ar,
++                                            struct ieee80211_sta *sta)
++{
++      u32 bw = WMI_PEER_CHWIDTH_20MHZ;
++
++      switch (sta->deflink.bandwidth) {
++      case IEEE80211_STA_RX_BW_20:
++              bw = WMI_PEER_CHWIDTH_20MHZ;
++              break;
++      case IEEE80211_STA_RX_BW_40:
++              bw = WMI_PEER_CHWIDTH_40MHZ;
++              break;
++      case IEEE80211_STA_RX_BW_80:
++              bw = WMI_PEER_CHWIDTH_80MHZ;
++              break;
++      case IEEE80211_STA_RX_BW_160:
++              bw = WMI_PEER_CHWIDTH_160MHZ;
++              break;
++      default:
++              ath11k_warn(ar->ab, "Invalid bandwidth %d for %pM\n",
++                          sta->deflink.bandwidth, sta->addr);
++              bw = WMI_PEER_CHWIDTH_20MHZ;
++              break;
++      }
++
++      return bw;
++}
++
+ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
+                                  struct ieee80211_vif *vif,
+                                  struct ieee80211_sta *sta,
+@@ -4590,6 +4652,12 @@ static int ath11k_mac_op_sta_state(struc
+               if (ret)
+                       ath11k_warn(ar->ab, "Failed to associate station: %pM\n",
+                                   sta->addr);
++
++              spin_lock_bh(&ar->data_lock);
++              /* Set arsta bw and prev bw */
++              arsta->bw = ath11k_mac_ieee80211_sta_bw_to_wmi(ar, sta);
++              arsta->bw_prev = arsta->bw;
++              spin_unlock_bh(&ar->data_lock);
+       } else if (old_state == IEEE80211_STA_ASSOC &&
+                  new_state == IEEE80211_STA_AUTHORIZED) {
+               spin_lock_bh(&ar->ab->base_lock);
+@@ -4713,28 +4781,8 @@ static void ath11k_mac_op_sta_rc_update(
+       spin_lock_bh(&ar->data_lock);
+       if (changed & IEEE80211_RC_BW_CHANGED) {
+-              bw = WMI_PEER_CHWIDTH_20MHZ;
+-
+-              switch (sta->deflink.bandwidth) {
+-              case IEEE80211_STA_RX_BW_20:
+-                      bw = WMI_PEER_CHWIDTH_20MHZ;
+-                      break;
+-              case IEEE80211_STA_RX_BW_40:
+-                      bw = WMI_PEER_CHWIDTH_40MHZ;
+-                      break;
+-              case IEEE80211_STA_RX_BW_80:
+-                      bw = WMI_PEER_CHWIDTH_80MHZ;
+-                      break;
+-              case IEEE80211_STA_RX_BW_160:
+-                      bw = WMI_PEER_CHWIDTH_160MHZ;
+-                      break;
+-              default:
+-                      ath11k_warn(ar->ab, "Invalid bandwidth %d in rc update for %pM\n",
+-                                  sta->deflink.bandwidth, sta->addr);
+-                      bw = WMI_PEER_CHWIDTH_20MHZ;
+-                      break;
+-              }
+-
++              bw = ath11k_mac_ieee80211_sta_bw_to_wmi(ar, sta);
++              arsta->bw_prev = arsta->bw;
+               arsta->bw = bw;
+       }
diff --git a/package/kernel/mac80211/patches/ath11k/0007-wifi-ath11k-suppress-add-interface-error.patch b/package/kernel/mac80211/patches/ath11k/0007-wifi-ath11k-suppress-add-interface-error.patch
new file mode 100644 (file)
index 0000000..fbef0ab
--- /dev/null
@@ -0,0 +1,52 @@
+From 638b26652b0438563a76ec90014c8cba34db982b Mon Sep 17 00:00:00 2001
+From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
+Date: Thu, 6 Oct 2022 06:28:42 +0530
+Subject: [PATCH 7/9] wifi: ath11k: suppress add interface error
+
+In the VIF (other than monitor type) creation request, we should not
+throw the error code when the monitor VIF creation fails, since the
+actual VIF creation succeeds. If we throw the error code from driver
+then the actual VIF creation get fail. So suppress the monitor VIF
+creation error by throwing warning message instead of error code.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221006005842.8599-1-quic_periyasa@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/mac.c | 9 +++------
+ 1 file changed, 3 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -6421,18 +6421,16 @@ static int ath11k_mac_op_add_interface(s
+       ath11k_dp_vdev_tx_attach(ar, arvif);
++      ath11k_debugfs_add_interface(arvif);
++
+       if (vif->type != NL80211_IFTYPE_MONITOR &&
+           test_bit(ATH11K_FLAG_MONITOR_CONF_ENABLED, &ar->monitor_flags)) {
+               ret = ath11k_mac_monitor_vdev_create(ar);
+-              if (ret) {
++              if (ret)
+                       ath11k_warn(ar->ab, "failed to create monitor vdev during add interface: %d",
+                                   ret);
+-                      goto err_peer_del;
+-              }
+       }
+-      ath11k_debugfs_add_interface(arvif);
+-
+       mutex_unlock(&ar->conf_mutex);
+       return 0;
+@@ -6457,7 +6455,6 @@ err_vdev_del:
+       spin_unlock_bh(&ar->data_lock);
+ err:
+-      ath11k_debugfs_remove_interface(arvif);
+       mutex_unlock(&ar->conf_mutex);
+       return ret;
diff --git a/package/kernel/mac80211/patches/ath11k/0008-wifi-ath11k-add-support-to-configure-channel-dwell-t.patch b/package/kernel/mac80211/patches/ath11k/0008-wifi-ath11k-add-support-to-configure-channel-dwell-t.patch
new file mode 100644 (file)
index 0000000..d0b19fe
--- /dev/null
@@ -0,0 +1,102 @@
+From c362daa213cdeb0a9e7c2ed84849544c24505720 Mon Sep 17 00:00:00 2001
+From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
+Date: Fri, 7 Oct 2022 10:41:30 +0530
+Subject: [PATCH 8/9] wifi: ath11k: add support to configure channel dwell time
+
+Add support to configure channel dwell time during scan.
+Dwell time help to stay on the channel for a specified duration
+during scan and aid userspace in finding WiFi networks. Very
+useful in passive scans where longer dwell times are needed
+to find the WiFi networks.
+
+Configure channel dwell time from duration of the scan request
+received from mac80211 when the duration is non-zero. When the
+scan request does not have duration value, use the default ones,
+the current implementation.
+
+Advertise corresponding feature flag NL80211_EXT_FEATURE_SET_SCAN_DWELL
+to enable the feature.
+
+Change is applicable for all ath11k hardware.
+
+Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
+
+Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
+Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/mac.c | 33 +++++++++++++++++++++++----
+ 1 file changed, 29 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -241,7 +241,10 @@ const struct htt_rx_ring_tlv_filter ath1
+ #define ath11k_a_rates (ath11k_legacy_rates + 4)
+ #define ath11k_a_rates_size (ARRAY_SIZE(ath11k_legacy_rates) - 4)
+-#define ATH11K_MAC_SCAN_TIMEOUT_MSECS 200 /* in msecs */
++#define ATH11K_MAC_SCAN_CMD_EVT_OVERHEAD              200 /* in msecs */
++
++/* Overhead due to the processing of channel switch events from FW */
++#define ATH11K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD   10 /* in msecs */
+ static const u32 ath11k_smps_map[] = {
+       [WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
+@@ -3612,6 +3615,7 @@ static int ath11k_mac_op_hw_scan(struct
+       struct scan_req_params arg;
+       int ret = 0;
+       int i;
++      u32 scan_timeout;
+       mutex_lock(&ar->conf_mutex);
+@@ -3681,6 +3685,26 @@ static int ath11k_mac_op_hw_scan(struct
+               ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
+       }
++      /* if duration is set, default dwell times will be overwritten */
++      if (req->duration) {
++              arg.dwell_time_active = req->duration;
++              arg.dwell_time_active_2g = req->duration;
++              arg.dwell_time_active_6g = req->duration;
++              arg.dwell_time_passive = req->duration;
++              arg.dwell_time_passive_6g = req->duration;
++              arg.burst_duration = req->duration;
++
++              scan_timeout = min_t(u32, arg.max_rest_time *
++                              (arg.num_chan - 1) + (req->duration +
++                              ATH11K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
++                              arg.num_chan, arg.max_scan_time);
++      } else {
++              scan_timeout = arg.max_scan_time;
++      }
++
++      /* Add a margin to account for event/command processing */
++      scan_timeout += ATH11K_MAC_SCAN_CMD_EVT_OVERHEAD;
++
+       ret = ath11k_start_scan(ar, &arg);
+       if (ret) {
+               ath11k_warn(ar->ab, "failed to start hw scan: %d\n", ret);
+@@ -3689,10 +3713,8 @@ static int ath11k_mac_op_hw_scan(struct
+               spin_unlock_bh(&ar->data_lock);
+       }
+-      /* Add a 200ms margin to account for event/command processing */
+       ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
+-                                   msecs_to_jiffies(arg.max_scan_time +
+-                                                    ATH11K_MAC_SCAN_TIMEOUT_MSECS));
++                                   msecs_to_jiffies(scan_timeout));
+ exit:
+       kfree(arg.chan_list);
+@@ -9060,6 +9082,9 @@ static int __ath11k_mac_register(struct
+                                     NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP);
+       }
++      wiphy_ext_feature_set(ar->hw->wiphy,
++                            NL80211_EXT_FEATURE_SET_SCAN_DWELL);
++
+       ath11k_reg_init(ar);
+       if (!test_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags)) {
diff --git a/package/kernel/mac80211/patches/ath11k/0009-wifi-ath11k-Send-PME-message-during-wakeup-from-D3co.patch b/package/kernel/mac80211/patches/ath11k/0009-wifi-ath11k-Send-PME-message-during-wakeup-from-D3co.patch
new file mode 100644 (file)
index 0000000..1e04c97
--- /dev/null
@@ -0,0 +1,39 @@
+From 3f9b09ccf7d5f23066b02881a737bee42def9d1a Mon Sep 17 00:00:00 2001
+From: Baochen Qiang <quic_bqiang@quicinc.com>
+Date: Mon, 10 Oct 2022 11:32:37 +0800
+Subject: [PATCH 9/9] wifi: ath11k: Send PME message during wakeup from D3cold
+
+We are seeing system stuck on some specific platforms due to
+WLAN chip fails to wakeup from D3cold state.
+
+With this flag, firmware will send PME message during wakeup
+and this issue is gone.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
+
+Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -19,6 +19,7 @@
+ #define SLEEP_CLOCK_SELECT_INTERNAL_BIT       0x02
+ #define HOST_CSTATE_BIT                       0x04
+ #define PLATFORM_CAP_PCIE_GLOBAL_RESET        0x08
++#define PLATFORM_CAP_PCIE_PME_D3COLD  0x10
+ #define FW_BUILD_ID_MASK "QC_IMAGE_VERSION_STRING="
+@@ -1752,6 +1753,8 @@ static int ath11k_qmi_host_cap_send(stru
+       if (ab->hw_params.global_reset)
+               req.nm_modem |= PLATFORM_CAP_PCIE_GLOBAL_RESET;
++      req.nm_modem |= PLATFORM_CAP_PCIE_PME_D3COLD;
++
+       ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi host cap request\n");
+       ret = qmi_txn_init(&ab->qmi.handle, &txn,
diff --git a/package/kernel/mac80211/patches/ath11k/0010-wifi-ath11k-Fix-firmware-crash-on-vdev-delete-race-c.patch b/package/kernel/mac80211/patches/ath11k/0010-wifi-ath11k-Fix-firmware-crash-on-vdev-delete-race-c.patch
new file mode 100644 (file)
index 0000000..7275af0
--- /dev/null
@@ -0,0 +1,116 @@
+From 3811fa1f231f1a3e29759efef4992116604aab8b Mon Sep 17 00:00:00 2001
+From: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
+Date: Tue, 11 Oct 2022 15:23:46 +0530
+Subject: [PATCH] wifi: ath11k: Fix firmware crash on vdev delete race
+ condition
+
+Current code does not wait for vdev delete completion on vdev create
+failures and tries to send another vdev create followed by vdev set
+param to firmware with same vdev id. This causes firmware crash.
+Fix this crash by waiting for vdev delete completion on vdev
+create failures.
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00905-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/mac.c | 60 +++++++++++++++++----------
+ 1 file changed, 37 insertions(+), 23 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -6233,6 +6233,40 @@ void ath11k_mac_11d_scan_stop_all(struct
+       }
+ }
++static int ath11k_mac_vdev_delete(struct ath11k *ar, struct ath11k_vif *arvif)
++{
++      unsigned long time_left;
++      struct ieee80211_vif *vif = arvif->vif;
++      int ret = 0;
++
++      lockdep_assert_held(&ar->conf_mutex);
++
++      reinit_completion(&ar->vdev_delete_done);
++
++      ret = ath11k_wmi_vdev_delete(ar, arvif->vdev_id);
++      if (ret) {
++              ath11k_warn(ar->ab, "failed to delete WMI vdev %d: %d\n",
++                          arvif->vdev_id, ret);
++              return ret;
++      }
++
++      time_left = wait_for_completion_timeout(&ar->vdev_delete_done,
++                                              ATH11K_VDEV_DELETE_TIMEOUT_HZ);
++      if (time_left == 0) {
++              ath11k_warn(ar->ab, "Timeout in receiving vdev delete response\n");
++              return -ETIMEDOUT;
++      }
++
++      ar->ab->free_vdev_map |= 1LL << (arvif->vdev_id);
++      ar->allocated_vdev_map &= ~(1LL << arvif->vdev_id);
++      ar->num_created_vdevs--;
++
++      ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "vdev %pM deleted, vdev_id %d\n",
++                 vif->addr, arvif->vdev_id);
++
++      return ret;
++}
++
+ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
+                                      struct ieee80211_vif *vif)
+ {
+@@ -6468,10 +6502,7 @@ err_peer_del:
+       }
+ err_vdev_del:
+-      ath11k_wmi_vdev_delete(ar, arvif->vdev_id);
+-      ar->num_created_vdevs--;
+-      ar->allocated_vdev_map &= ~(1LL << arvif->vdev_id);
+-      ab->free_vdev_map |= 1LL << arvif->vdev_id;
++      ath11k_mac_vdev_delete(ar, arvif);
+       spin_lock_bh(&ar->data_lock);
+       list_del(&arvif->list);
+       spin_unlock_bh(&ar->data_lock);
+@@ -6499,7 +6530,6 @@ static void ath11k_mac_op_remove_interfa
+       struct ath11k *ar = hw->priv;
+       struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
+       struct ath11k_base *ab = ar->ab;
+-      unsigned long time_left;
+       int ret;
+       int i;
+@@ -6520,29 +6550,13 @@ static void ath11k_mac_op_remove_interfa
+                                   arvif->vdev_id, ret);
+       }
+-      reinit_completion(&ar->vdev_delete_done);
+-
+-      ret = ath11k_wmi_vdev_delete(ar, arvif->vdev_id);
++      ret = ath11k_mac_vdev_delete(ar, arvif);
+       if (ret) {
+-              ath11k_warn(ab, "failed to delete WMI vdev %d: %d\n",
++              ath11k_warn(ab, "failed to delete vdev %d: %d\n",
+                           arvif->vdev_id, ret);
+               goto err_vdev_del;
+       }
+-      time_left = wait_for_completion_timeout(&ar->vdev_delete_done,
+-                                              ATH11K_VDEV_DELETE_TIMEOUT_HZ);
+-      if (time_left == 0) {
+-              ath11k_warn(ab, "Timeout in receiving vdev delete response\n");
+-              goto err_vdev_del;
+-      }
+-
+-      ab->free_vdev_map |= 1LL << (arvif->vdev_id);
+-      ar->allocated_vdev_map &= ~(1LL << arvif->vdev_id);
+-      ar->num_created_vdevs--;
+-
+-      ath11k_dbg(ab, ATH11K_DBG_MAC, "vdev %pM deleted, vdev_id %d\n",
+-                 vif->addr, arvif->vdev_id);
+-
+       if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) {
+               clear_bit(ATH11K_FLAG_MONITOR_VDEV_CREATED, &ar->monitor_flags);
+               ar->monitor_vdev_id = -1;
diff --git a/package/kernel/mac80211/patches/ath11k/0011-wifi-ath11k-fix-monitor-vdev-creation-with-firmware-.patch b/package/kernel/mac80211/patches/ath11k/0011-wifi-ath11k-fix-monitor-vdev-creation-with-firmware-.patch
new file mode 100644 (file)
index 0000000..2f066d0
--- /dev/null
@@ -0,0 +1,40 @@
+From f3ca72b0327101a074a871539e61775d43908ca4 Mon Sep 17 00:00:00 2001
+From: Nagarajan Maran <quic_nmaran@quicinc.com>
+Date: Fri, 14 Oct 2022 21:20:54 +0530
+Subject: [PATCH] wifi: ath11k: fix monitor vdev creation with firmware
+ recovery
+
+During firmware recovery, the monitor interface is not
+getting created in the driver and firmware since
+the respective flags are not updated properly.
+
+So after firmware recovery is successful, when monitor
+interface is brought down manually, firmware assertion
+is observed, since we are trying to bring down the
+interface which is not yet created in the firmware.
+
+Fix this by updating the monitor flags properly per
+phy#, during firmware recovery.
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221014155054.11471-1-quic_nmaran@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/core.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -1677,6 +1677,10 @@ void ath11k_core_pre_reconfigure_recover
+                            ath11k_mac_tx_mgmt_pending_free, ar);
+               idr_destroy(&ar->txmgmt_idr);
+               wake_up(&ar->txmgmt_empty_waitq);
++
++              ar->monitor_vdev_id = -1;
++              clear_bit(ATH11K_FLAG_MONITOR_STARTED, &ar->monitor_flags);
++              clear_bit(ATH11K_FLAG_MONITOR_VDEV_CREATED, &ar->monitor_flags);
+       }
+       wake_up(&ab->wmi_ab.tx_credits_wq);
diff --git a/package/kernel/mac80211/patches/ath11k/0012-wifi-ath11k-Fix-qmi_msg_handler-data-structure-initi.patch b/package/kernel/mac80211/patches/ath11k/0012-wifi-ath11k-Fix-qmi_msg_handler-data-structure-initi.patch
new file mode 100644 (file)
index 0000000..1f7418f
--- /dev/null
@@ -0,0 +1,33 @@
+From ed3725e15a154ebebf44e0c34806c57525483f92 Mon Sep 17 00:00:00 2001
+From: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>
+Date: Fri, 21 Oct 2022 14:31:26 +0530
+Subject: [PATCH] wifi: ath11k: Fix qmi_msg_handler data structure
+ initialization
+
+qmi_msg_handler is required to be null terminated by QMI module.
+There might be a case where a handler for a msg id is not present in the
+handlers array which can lead to infinite loop while searching the handler
+and therefore out of bound access in qmi_invoke_handler().
+Hence update the initialization in qmi_msg_handler data structure.
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -3090,6 +3090,9 @@ static const struct qmi_msg_handler ath1
+                       sizeof(struct qmi_wlfw_fw_init_done_ind_msg_v01),
+               .fn = ath11k_qmi_msg_fw_init_done_cb,
+       },
++
++      /* end of list */
++      {},
+ };
+ static int ath11k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,
diff --git a/package/kernel/mac80211/patches/ath11k/0013-wifi-ath11k-synchronize-ath11k_mac_he_gi_to_nl80211_.patch b/package/kernel/mac80211/patches/ath11k/0013-wifi-ath11k-synchronize-ath11k_mac_he_gi_to_nl80211_.patch
new file mode 100644 (file)
index 0000000..1e89b4d
--- /dev/null
@@ -0,0 +1,42 @@
+From dd1c2322694522f674c874f5fa02ac5ae39135dd Mon Sep 17 00:00:00 2001
+From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
+Date: Mon, 31 Oct 2022 12:43:41 +0100
+Subject: [PATCH] wifi: ath11k: synchronize
+ ath11k_mac_he_gi_to_nl80211_he_gi()'s return type
+
+ath11k_mac_he_gi_to_nl80211_he_gi() generates a valid warning with gcc-13:
+  drivers/net/wireless/ath/ath11k/mac.c:321:20: error: conflicting types for 'ath11k_mac_he_gi_to_nl80211_he_gi' due to enum/integer mismatch; have 'enum nl80211_he_gi(u8)'
+  drivers/net/wireless/ath/ath11k/mac.h:166:5: note: previous declaration of 'ath11k_mac_he_gi_to_nl80211_he_gi' with type 'u32(u8)'
+
+I.e. the type of the return value ath11k_mac_he_gi_to_nl80211_he_gi() in
+the declaration is u32, while the definition spells enum nl80211_he_gi.
+Synchronize them to the latter.
+
+Cc: Martin Liska <mliska@suse.cz>
+Cc: Kalle Valo <kvalo@kernel.org>
+Cc: "David S. Miller" <davem@davemloft.net>
+Cc: Eric Dumazet <edumazet@google.com>
+Cc: Jakub Kicinski <kuba@kernel.org>
+Cc: Paolo Abeni <pabeni@redhat.com>
+Cc: ath11k@lists.infradead.org
+Cc: linux-wireless@vger.kernel.org
+Cc: netdev@vger.kernel.org
+Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
+Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221031114341.10377-1-jirislaby@kernel.org
+---
+ drivers/net/wireless/ath/ath11k/mac.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.h
++++ b/drivers/net/wireless/ath/ath11k/mac.h
+@@ -163,7 +163,7 @@ void ath11k_mac_drain_tx(struct ath11k *
+ void ath11k_mac_peer_cleanup_all(struct ath11k *ar);
+ int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx);
+ u8 ath11k_mac_bw_to_mac80211_bw(u8 bw);
+-u32 ath11k_mac_he_gi_to_nl80211_he_gi(u8 sgi);
++enum nl80211_he_gi ath11k_mac_he_gi_to_nl80211_he_gi(u8 sgi);
+ enum nl80211_he_ru_alloc ath11k_mac_phy_he_ru_to_nl80211_he_ru_alloc(u16 ru_phy);
+ enum nl80211_he_ru_alloc ath11k_mac_he_ru_tones_to_nl80211_he_ru_alloc(u16 ru_tones);
+ enum ath11k_supported_bw ath11k_mac_mac80211_bw_to_ath11k_bw(enum rate_info_bw bw);
diff --git a/package/kernel/mac80211/patches/ath11k/0016-wifi-ath11k-Make-QMI-message-rules-const.patch b/package/kernel/mac80211/patches/ath11k/0016-wifi-ath11k-Make-QMI-message-rules-const.patch
new file mode 100644 (file)
index 0000000..1f48df7
--- /dev/null
@@ -0,0 +1,341 @@
+From 93c1592889fca46d09d833455628bab05516cdbf Mon Sep 17 00:00:00 2001
+From: Jeff Johnson <quic_jjohnson@quicinc.com>
+Date: Wed, 14 Sep 2022 17:23:03 -0700
+Subject: [PATCH] wifi: ath11k: Make QMI message rules const
+
+Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct
+qmi_elem_info") allows QMI message encoding/decoding rules to be
+const, so do that for ath11k.
+
+Compile tested only.
+
+Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20220915002303.12206-1-quic_jjohnson@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 72 +++++++++++++--------------
+ 1 file changed, 36 insertions(+), 36 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -29,7 +29,7 @@ module_param_named(cold_boot_cal, ath11k
+ MODULE_PARM_DESC(cold_boot_cal,
+                "Decrease the channel switch time but increase the driver load time (Default: true)");
+-static struct qmi_elem_info qmi_wlanfw_host_cap_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_host_cap_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_OPT_FLAG,
+               .elem_len       = 1,
+@@ -280,7 +280,7 @@ static struct qmi_elem_info qmi_wlanfw_h
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_host_cap_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_host_cap_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -297,7 +297,7 @@ static struct qmi_elem_info qmi_wlanfw_h
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_ind_register_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_ind_register_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_OPT_FLAG,
+               .elem_len       = 1,
+@@ -522,7 +522,7 @@ static struct qmi_elem_info qmi_wlanfw_i
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_ind_register_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_ind_register_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -558,7 +558,7 @@ static struct qmi_elem_info qmi_wlanfw_i
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_mem_cfg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_mem_cfg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_8_BYTE,
+               .elem_len       = 1,
+@@ -590,7 +590,7 @@ static struct qmi_elem_info qmi_wlanfw_m
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_mem_seg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_mem_seg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -632,7 +632,7 @@ static struct qmi_elem_info qmi_wlanfw_m
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_request_mem_ind_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_request_mem_ind_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_DATA_LEN,
+               .elem_len       = 1,
+@@ -659,7 +659,7 @@ static struct qmi_elem_info qmi_wlanfw_r
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_mem_seg_resp_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_mem_seg_resp_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_8_BYTE,
+               .elem_len       = 1,
+@@ -699,7 +699,7 @@ static struct qmi_elem_info qmi_wlanfw_m
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_respond_mem_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_respond_mem_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_DATA_LEN,
+               .elem_len       = 1,
+@@ -726,7 +726,7 @@ static struct qmi_elem_info qmi_wlanfw_r
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_respond_mem_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_respond_mem_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -744,7 +744,7 @@ static struct qmi_elem_info qmi_wlanfw_r
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_cap_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_cap_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_EOTI,
+               .array_type     = NO_ARRAY,
+@@ -752,7 +752,7 @@ static struct qmi_elem_info qmi_wlanfw_c
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_device_info_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_device_info_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_EOTI,
+               .array_type     = NO_ARRAY,
+@@ -760,7 +760,7 @@ static struct qmi_elem_info qmi_wlanfw_d
+       },
+ };
+-static struct qmi_elem_info qmi_wlfw_device_info_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlfw_device_info_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -814,7 +814,7 @@ static struct qmi_elem_info qmi_wlfw_dev
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_rf_chip_info_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_rf_chip_info_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -840,7 +840,7 @@ static struct qmi_elem_info qmi_wlanfw_r
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_rf_board_info_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_rf_board_info_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -857,7 +857,7 @@ static struct qmi_elem_info qmi_wlanfw_r
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_soc_info_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_soc_info_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -873,7 +873,7 @@ static struct qmi_elem_info qmi_wlanfw_s
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_fw_version_info_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_fw_version_info_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -899,7 +899,7 @@ static struct qmi_elem_info qmi_wlanfw_f
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_cap_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_cap_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1100,7 +1100,7 @@ static struct qmi_elem_info qmi_wlanfw_c
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_bdf_download_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_bdf_download_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_1_BYTE,
+               .elem_len       = 1,
+@@ -1235,7 +1235,7 @@ static struct qmi_elem_info qmi_wlanfw_b
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_bdf_download_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_bdf_download_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1253,7 +1253,7 @@ static struct qmi_elem_info qmi_wlanfw_b
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_m3_info_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_m3_info_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_8_BYTE,
+               .elem_len       = 1,
+@@ -1277,7 +1277,7 @@ static struct qmi_elem_info qmi_wlanfw_m
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_m3_info_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_m3_info_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1294,7 +1294,7 @@ static struct qmi_elem_info qmi_wlanfw_m
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_ce_tgt_pipe_cfg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_ce_tgt_pipe_cfg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -1347,7 +1347,7 @@ static struct qmi_elem_info qmi_wlanfw_c
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_ce_svc_pipe_cfg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_ce_svc_pipe_cfg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -1382,7 +1382,7 @@ static struct qmi_elem_info qmi_wlanfw_c
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_shadow_reg_cfg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_shadow_reg_cfg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_2_BYTE,
+               .elem_len       = 1,
+@@ -1406,7 +1406,7 @@ static struct qmi_elem_info qmi_wlanfw_s
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_shadow_reg_v2_cfg_s_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_shadow_reg_v2_cfg_s_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -1423,7 +1423,7 @@ static struct qmi_elem_info qmi_wlanfw_s
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_mode_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_mode_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_UNSIGNED_4_BYTE,
+               .elem_len       = 1,
+@@ -1458,7 +1458,7 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_mode_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_mode_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1476,7 +1476,7 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_cfg_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_cfg_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_OPT_FLAG,
+               .elem_len       = 1,
+@@ -1615,7 +1615,7 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_cfg_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_cfg_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1632,28 +1632,28 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_mem_ready_ind_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_mem_ready_ind_msg_v01_ei[] = {
+       {
+               .data_type = QMI_EOTI,
+               .array_type = NO_ARRAY,
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_fw_ready_ind_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_fw_ready_ind_msg_v01_ei[] = {
+       {
+               .data_type = QMI_EOTI,
+               .array_type = NO_ARRAY,
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_cold_boot_cal_done_ind_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_cold_boot_cal_done_ind_msg_v01_ei[] = {
+       {
+               .data_type = QMI_EOTI,
+               .array_type = NO_ARRAY,
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_ini_req_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_ini_req_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_OPT_FLAG,
+               .elem_len       = 1,
+@@ -1679,7 +1679,7 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlanfw_wlan_ini_resp_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlanfw_wlan_ini_resp_msg_v01_ei[] = {
+       {
+               .data_type      = QMI_STRUCT,
+               .elem_len       = 1,
+@@ -1697,7 +1697,7 @@ static struct qmi_elem_info qmi_wlanfw_w
+       },
+ };
+-static struct qmi_elem_info qmi_wlfw_fw_init_done_ind_msg_v01_ei[] = {
++static const struct qmi_elem_info qmi_wlfw_fw_init_done_ind_msg_v01_ei[] = {
+       {
+               .data_type = QMI_EOTI,
+               .array_type = NO_ARRAY,
diff --git a/package/kernel/mac80211/patches/ath11k/0017-wifi-ath11k-Trigger-sta-disconnect-on-hardware-resta.patch b/package/kernel/mac80211/patches/ath11k/0017-wifi-ath11k-Trigger-sta-disconnect-on-hardware-resta.patch
new file mode 100644 (file)
index 0000000..f95e502
--- /dev/null
@@ -0,0 +1,119 @@
+From a018750a2cceaf4427c4ee3d9ce3e83a171d5bd6 Mon Sep 17 00:00:00 2001
+From: Youghandhar Chintala <quic_youghand@quicinc.com>
+Date: Fri, 4 Nov 2022 14:24:03 +0530
+Subject: [PATCH] wifi: ath11k: Trigger sta disconnect on hardware restart
+
+Currently after the hardware restart triggered from the driver, the
+station interface connection remains intact, since a disconnect trigger
+is not sent to userspace. This can lead to a problem in targets where
+the wifi mac sequence is added by the firmware.
+
+After the target restart, its wifi mac sequence number gets reset to
+zero. Hence AP to which our device is connected will receive frames with
+a  wifi mac sequence number jump to the past, thereby resulting in the
+AP dropping all these frames, until the frame arrives with a wifi mac
+sequence number which AP was expecting.
+
+To avoid such frame drops, its better to trigger a station disconnect
+upon target hardware restart which can be done with API
+ieee80211_reconfig_disconnect exposed to mac80211.
+
+The other targets are not affected by this change, since the hardware
+params flag is not set.
+
+Reported-by: kernel test robot <lkp@intel.com>
+
+Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
+
+Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221104085403.11025-1-quic_youghand@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/core.c | 6 ++++++
+ drivers/net/wireless/ath/ath11k/hw.h   | 1 +
+ drivers/net/wireless/ath/ath11k/mac.c  | 7 +++++++
+ 3 files changed, 14 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -195,6 +195,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = true,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+               .smp2p_wow_exit = false,
++              .support_fw_mac_sequence = false,
+       },
+       {
+               .name = "qca6390 hw2.0",
+@@ -277,6 +278,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = true,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+               .smp2p_wow_exit = false,
++              .support_fw_mac_sequence = true,
+       },
+       {
+               .name = "qcn9074 hw1.0",
+@@ -356,6 +358,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = true,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+               .smp2p_wow_exit = false,
++              .support_fw_mac_sequence = false,
+       },
+       {
+               .name = "wcn6855 hw2.0",
+@@ -438,6 +441,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = true,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+               .smp2p_wow_exit = false,
++              .support_fw_mac_sequence = true,
+       },
+       {
+               .name = "wcn6855 hw2.1",
+@@ -519,6 +523,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = true,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+               .smp2p_wow_exit = false,
++              .support_fw_mac_sequence = true,
+       },
+       {
+               .name = "wcn6750 hw1.0",
+@@ -597,6 +602,7 @@ static const struct ath11k_hw_params ath
+               .tcl_ring_retry = false,
+               .tx_ring_size = DP_TCL_DATA_RING_SIZE_WCN6750,
+               .smp2p_wow_exit = true,
++              .support_fw_mac_sequence = true,
+       },
+ };
+--- a/drivers/net/wireless/ath/ath11k/hw.h
++++ b/drivers/net/wireless/ath/ath11k/hw.h
+@@ -219,6 +219,7 @@ struct ath11k_hw_params {
+       bool tcl_ring_retry;
+       u32 tx_ring_size;
+       bool smp2p_wow_exit;
++      bool support_fw_mac_sequence;
+ };
+ struct ath11k_hw_ops {
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -8010,6 +8010,7 @@ ath11k_mac_op_reconfig_complete(struct i
+       struct ath11k *ar = hw->priv;
+       struct ath11k_base *ab = ar->ab;
+       int recovery_count;
++      struct ath11k_vif *arvif;
+       if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
+               return;
+@@ -8045,6 +8046,12 @@ ath11k_mac_op_reconfig_complete(struct i
+                               ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset success\n");
+                       }
+               }
++              if (ar->ab->hw_params.support_fw_mac_sequence) {
++                      list_for_each_entry(arvif, &ar->arvifs, list) {
++                              if (arvif->is_up && arvif->vdev_type == WMI_VDEV_TYPE_STA)
++                                      ieee80211_hw_restart_disconnect(arvif->vif);
++                      }
++              }
+       }
+       mutex_unlock(&ar->conf_mutex);
diff --git a/package/kernel/mac80211/patches/ath11k/0018-wifi-ath11k-Fix-race-condition-with-struct-htt_ppdu_.patch b/package/kernel/mac80211/patches/ath11k/0018-wifi-ath11k-Fix-race-condition-with-struct-htt_ppdu_.patch
new file mode 100644 (file)
index 0000000..cef61ee
--- /dev/null
@@ -0,0 +1,103 @@
+From e44de90453bb2b46a523df78c39eb896bab35dcd Mon Sep 17 00:00:00 2001
+From: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
+Date: Tue, 29 Nov 2022 13:04:02 +0200
+Subject: [PATCH] wifi: ath11k: Fix race condition with struct
+ htt_ppdu_stats_info
+
+A crash happens when running the traffic with multiple clients:
+
+Crash Signature : Unable to handle kernel paging request at
+virtual address ffffffd700970918 During the crash, PC points to
+"ieee80211_tx_rate_update+0x30/0x68 [mac80211]"
+LR points to "ath11k_dp_htt_htc_t2h_msg_handler+0x5a8/0x8a0 [ath11k]".
+
+Struct ppdu_stats_info is allocated and accessed from event callback via copy
+engine tasklet, this has a problem when freeing it from ath11k_mac_op_stop().
+
+Use data_lock during entire ath11k_dp_htt_get_ppdu_desc() call to protect
+struct htt_ppdu_stats_info access and to avoid race condition when accessing it
+from ath11k_mac_op_stop().
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
+Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
+Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20221124071104.22506-1-quic_kathirve@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/dp_rx.c | 22 +++++++++++-----------
+ 1 file changed, 11 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
+@@ -1535,13 +1535,12 @@ struct htt_ppdu_stats_info *ath11k_dp_ht
+ {
+       struct htt_ppdu_stats_info *ppdu_info;
+-      spin_lock_bh(&ar->data_lock);
++      lockdep_assert_held(&ar->data_lock);
++
+       if (!list_empty(&ar->ppdu_stats_info)) {
+               list_for_each_entry(ppdu_info, &ar->ppdu_stats_info, list) {
+-                      if (ppdu_info->ppdu_id == ppdu_id) {
+-                              spin_unlock_bh(&ar->data_lock);
++                      if (ppdu_info->ppdu_id == ppdu_id)
+                               return ppdu_info;
+-                      }
+               }
+               if (ar->ppdu_stat_list_depth > HTT_PPDU_DESC_MAX_DEPTH) {
+@@ -1553,16 +1552,13 @@ struct htt_ppdu_stats_info *ath11k_dp_ht
+                       kfree(ppdu_info);
+               }
+       }
+-      spin_unlock_bh(&ar->data_lock);
+       ppdu_info = kzalloc(sizeof(*ppdu_info), GFP_ATOMIC);
+       if (!ppdu_info)
+               return NULL;
+-      spin_lock_bh(&ar->data_lock);
+       list_add_tail(&ppdu_info->list, &ar->ppdu_stats_info);
+       ar->ppdu_stat_list_depth++;
+-      spin_unlock_bh(&ar->data_lock);
+       return ppdu_info;
+ }
+@@ -1586,16 +1582,17 @@ static int ath11k_htt_pull_ppdu_stats(st
+       ar = ath11k_mac_get_ar_by_pdev_id(ab, pdev_id);
+       if (!ar) {
+               ret = -EINVAL;
+-              goto exit;
++              goto out;
+       }
+       if (ath11k_debugfs_is_pktlog_lite_mode_enabled(ar))
+               trace_ath11k_htt_ppdu_stats(ar, skb->data, len);
++      spin_lock_bh(&ar->data_lock);
+       ppdu_info = ath11k_dp_htt_get_ppdu_desc(ar, ppdu_id);
+       if (!ppdu_info) {
+               ret = -EINVAL;
+-              goto exit;
++              goto out_unlock_data;
+       }
+       ppdu_info->ppdu_id = ppdu_id;
+@@ -1604,10 +1601,13 @@ static int ath11k_htt_pull_ppdu_stats(st
+                                    (void *)ppdu_info);
+       if (ret) {
+               ath11k_warn(ab, "Failed to parse tlv %d\n", ret);
+-              goto exit;
++              goto out_unlock_data;
+       }
+-exit:
++out_unlock_data:
++      spin_unlock_bh(&ar->data_lock);
++
++out:
+       rcu_read_unlock();
+       return ret;
diff --git a/package/kernel/mac80211/patches/ath11k/900-ath11k-control-thermal-support-via-symbol.patch b/package/kernel/mac80211/patches/ath11k/900-ath11k-control-thermal-support-via-symbol.patch
new file mode 100644 (file)
index 0000000..60720a7
--- /dev/null
@@ -0,0 +1,66 @@
+From 703d6551f71e7290619d6effe2a25a64e10538b7 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Thu, 15 Dec 2022 12:20:52 +0100
+Subject: [PATCH] ath11k: control thermal support via symbol
+
+Currently, thermal support will get built if CONFIG_THERMAL is reachable,
+however this is not suitable for OpenWrt as with ALL_KMODS being set to y
+ATH11K_THERMAL wont get selected and so hwmon and thermal kmods wont get
+pulled in resulting in a build-failure.
+
+So, to avoid that, lets do what is already done for ath10k and add a
+config symbol into backports for enabling thermal support.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+---
+ drivers/net/wireless/ath/ath11k/Kconfig   | 7 +++++++
+ drivers/net/wireless/ath/ath11k/Makefile  | 2 +-
+ drivers/net/wireless/ath/ath11k/thermal.h | 2 +-
+ local-symbols                             | 1 +
+ 4 files changed, 10 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/Kconfig
++++ b/drivers/net/wireless/ath/ath11k/Kconfig
+@@ -61,3 +61,10 @@ config ATH11K_SPECTRAL
+         Enable ath11k spectral scan support
+         Say Y to enable access to the FFT/spectral data via debugfs.
++
++config ATH11K_THERMAL
++      bool "ath11k thermal sensors and throttling support"
++      depends on ATH11K
++      depends on THERMAL
++      help
++        Enable ath11k thermal sensors and throttling support.
+--- a/drivers/net/wireless/ath/ath11k/Makefile
++++ b/drivers/net/wireless/ath/ath11k/Makefile
+@@ -22,7 +22,7 @@ ath11k-y += core.o \
+ ath11k-$(CPTCFG_ATH11K_DEBUGFS) += debugfs.o debugfs_htt_stats.o debugfs_sta.o
+ ath11k-$(CPTCFG_NL80211_TESTMODE) += testmode.o
+ ath11k-$(CPTCFG_ATH11K_TRACING) += trace.o
+-ath11k-$(CONFIG_THERMAL) += thermal.o
++ath11k-$(CPTCFG_ATH11K_THERMAL) += thermal.o
+ ath11k-$(CPTCFG_ATH11K_SPECTRAL) += spectral.o
+ ath11k-$(CONFIG_PM) += wow.o
+--- a/drivers/net/wireless/ath/ath11k/thermal.h
++++ b/drivers/net/wireless/ath/ath11k/thermal.h
+@@ -25,7 +25,7 @@ struct ath11k_thermal {
+       int temperature;
+ };
+-#if IS_REACHABLE(CONFIG_THERMAL)
++#if IS_REACHABLE(CPTCFG_ATH11K_THERMAL)
+ int ath11k_thermal_register(struct ath11k_base *sc);
+ void ath11k_thermal_unregister(struct ath11k_base *sc);
+ int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state);
+--- a/local-symbols
++++ b/local-symbols
+@@ -174,6 +174,7 @@ ATH11K_DEBUG=
+ ATH11K_DEBUGFS=
+ ATH11K_TRACING=
+ ATH11K_SPECTRAL=
++ATH11K_THERMAL=
+ WLAN_VENDOR_ATMEL=
+ ATMEL=
+ PCI_ATMEL=
diff --git a/package/kernel/mac80211/patches/ath11k/901-wifi-ath11k-pci-fix-compilation-in-5.16-and-older.patch b/package/kernel/mac80211/patches/ath11k/901-wifi-ath11k-pci-fix-compilation-in-5.16-and-older.patch
new file mode 100644 (file)
index 0000000..2b6c18d
--- /dev/null
@@ -0,0 +1,29 @@
+From 04178918e7f6b5f34dde81ec79ee8a1ccace3be3 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Mon, 17 Oct 2022 11:45:03 +0200
+Subject: [PATCH] wifi: ath11k: pci: fix compilation in 5.16 and older
+
+Commit ("genirq/msi, treewide: Use a named struct for PCI/MSI attributes")
+changed the msi_desc structure a bit, however that is only available in
+kernels 5.17 and newer, so check for kernel version to allow compilation
+in 5.16 and older.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+---
+ drivers/net/wireless/ath/ath11k/pci.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/pci.c
++++ b/drivers/net/wireless/ath/ath11k/pci.c
+@@ -451,7 +451,11 @@ static int ath11k_pci_alloc_msi(struct a
+       pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_LO,
+                             &ab->pci.msi.addr_lo);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(5, 17, 0))
+       if (msi_desc->pci.msi_attrib.is_64) {
++#else
++      if (msi_desc->msi_attrib.is_64) {
++#endif
+               pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_HI,
+                                     &ab->pci.msi.addr_hi);
+       } else {
diff --git a/package/kernel/mac80211/patches/build/100-backports-drop-QRTR-and-MHI.patch b/package/kernel/mac80211/patches/build/100-backports-drop-QRTR-and-MHI.patch
new file mode 100644 (file)
index 0000000..b017a0c
--- /dev/null
@@ -0,0 +1,76 @@
+From 54e0f9aaf340377fb76acdffee9ec7372c4b70ae Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Mon, 17 Oct 2022 11:35:36 +0200
+Subject: [PATCH] backports: drop QRTR and MHI
+
+Backports currently include QRTR and MHI due to ath11k-pci requiring them,
+however this at the same time prevents us from adding ath11k-ahb as it
+also requires QRTR however its AHB variant from the kernel will conflict
+with the core provided by backports.
+
+Since MHI also conflicts with existing OpenWrt kmods providing MHI drop
+both from backports and use the ones provided by OpenWrt kernel.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+---
+ Kconfig.sources                         | 2 --
+ Makefile.kernel                         | 2 --
+ drivers/net/wireless/ath/ath11k/Kconfig | 6 +++---
+ local-symbols                           | 8 --------
+ 4 files changed, 3 insertions(+), 15 deletions(-)
+
+--- a/Kconfig.sources
++++ b/Kconfig.sources
+@@ -4,8 +4,6 @@ source "$BACKPORT_DIR/compat/Kconfig"
+ # these are copied from the kernel
+ source "$BACKPORT_DIR/net/wireless/Kconfig"
+ source "$BACKPORT_DIR/net/mac80211/Kconfig"
+-source "$BACKPORT_DIR/net/qrtr/Kconfig"
+-source "$BACKPORT_DIR/drivers/bus/mhi/Kconfig"
+ source "$BACKPORT_DIR/drivers/soc/qcom/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
+--- a/Makefile.kernel
++++ b/Makefile.kernel
+@@ -39,9 +39,7 @@ obj-y += compat/
+ obj-$(CPTCFG_CFG80211) += net/wireless/
+ obj-$(CPTCFG_MAC80211) += net/mac80211/
+-obj-$(CPTCFG_QRTR) += net/qrtr/
+ obj-$(CPTCFG_QCOM_QMI_HELPERS) += drivers/soc/qcom/
+-obj-$(CPTCFG_MHI_BUS) += drivers/bus/mhi/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
+ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
+--- a/drivers/net/wireless/ath/ath11k/Kconfig
++++ b/drivers/net/wireless/ath/ath11k/Kconfig
+@@ -25,9 +25,9 @@ config ATH11K_PCI
+       tristate "Atheros ath11k PCI support"
+       depends on m
+       depends on ATH11K && PCI
+-      select MHI_BUS
+-      select QRTR
+-      select QRTR_MHI
++      depends on MHI_BUS
++      depends on QRTR
++      depends on QRTR_MHI
+       help
+         This module adds support for PCIE bus
+--- a/local-symbols
++++ b/local-symbols
+@@ -65,14 +65,6 @@ MAC80211_MESH_PS_DEBUG=
+ MAC80211_TDLS_DEBUG=
+ MAC80211_DEBUG_COUNTERS=
+ MAC80211_STA_HASH_MAX_SIZE=
+-QRTR=
+-QRTR_SMD=
+-QRTR_TUN=
+-QRTR_MHI=
+-MHI_BUS=
+-MHI_BUS_DEBUG=
+-MHI_BUS_PCI_GENERIC=
+-MHI_BUS_EP=
+ QCOM_AOSS_QMP=
+ QCOM_COMMAND_DB=
+ QCOM_CPR=