FEATURES:=squashfs gpio
KERNEL_PATCHVER:=5.10
+KERNEL_TESTING_PATCHVER:=5.15
define Target/Description
Build firmware images for Ralink RT288x/RT3xxx based boards.
bootargs = "console=ttyS0,57600";
};
+#ifdef DTS_LEGACY
pll: pll {
compatible = "mediatek,mt7621-pll", "syscon";
#clock-cells = <1>;
clock-output-names = "cpu", "bus";
};
+#endif
sysclock: sysclock {
#clock-cells = <0>;
#size-cells = <1>;
sysc: syscon@0 {
+#ifdef DTS_LEGACY
compatible = "mtk,mt7621-sysc", "syscon";
+#else
+ compatible = "mediatek,mt7621-sysc", "syscon";
+ #clock-cells = <1>;
+ ralink,memctl = <&memc>;
+ clock-output-names = "xtal", "cpu", "bus",
+ "50m", "125m", "150m",
+ "250m", "270m";
+#endif
reg = <0x0 0x100>;
};
#interrupt-cells = <2>;
compatible = "mediatek,mt7621-gpio";
gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 95>;
interrupt-controller;
reg = <0x600 0x100>;
interrupt-parent = <&gic>;
};
memc: syscon@5000 {
+#ifdef DTS_LEGACY
compatible = "mtk,mt7621-memc", "syscon";
+#else
+ compatible = "mediatek,mt7621-memc", "syscon";
+#endif
reg = <0x5000 0x1000>;
};
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
+#ifdef DTS_LEGACY
clocks = <&pll MT7621_CLK_BUS>;
+#else
+ clocks = <&sysc MT7621_CLK_BUS>;
+#endif
resets = <&rstctrl 18>;
reset-names = "spi";
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+#ifdef DTS_LEGACY
clocks = <&pll MT7621_CLK_CPU>;
+#else
+ clocks = <&sysc MT7621_CLK_CPU>;
+#endif
};
};
compatible = "mediatek,mt7621-eth";
reg = <0x1e100000 0x10000>;
+#ifdef DTS_LEGACY
clocks = <&sysclock>;
clock-names = "ethif";
+#else
+ clocks = <&sysc MT7621_CLK_FE>,
+ <&sysc MT7621_CLK_ETH>;
+ clock-names = "fe", "ethif";
+#endif
#address-cells = <1>;
#size-cells = <0>;
- resets = <&rstctrl 6 &rstctrl 23>;
+ resets = <&rstctrl 6>, <&rstctrl 23>;
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
mediatek,ethsys = <&sysc>;
+#ifdef DTS_LEGACY
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
+#endif
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
device_type = "pci";
+#ifdef DTS_LEGACY
ranges = <0x02000000 0 0x00000000 0x60000000 0 0x10000000>, /* pci memory */
<0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
+#else
+ ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
+ <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
+#endif
+
+ status = "disabled";
+#ifdef DTS_LEGACY
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH
GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
reset-names = "pcie0", "pcie1", "pcie2";
clock-names = "pcie0", "pcie1", "pcie2";
phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
phy-names = "pcie-phy0", "pcie-phy2";
+#else
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xF800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+#endif
reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
#size-cells = <2>;
device_type = "pci";
ranges;
+#ifndef DTS_LEGACY
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 24>;
+ clocks = <&sysc MT7621_CLK_PCIE0>;
+ phys = <&pcie0_phy 1>;
+ phy-names = "pcie-phy0";
+#endif
};
pcie1: pcie@1,0 {
#size-cells = <2>;
device_type = "pci";
ranges;
+#ifndef DTS_LEGACY
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 25>;
+ clocks = <&sysc MT7621_CLK_PCIE1>;
+ phys = <&pcie0_phy 1>;
+ phy-names = "pcie-phy1";
+#endif
};
pcie2: pcie@2,0 {
#size-cells = <2>;
device_type = "pci";
ranges;
+#ifndef DTS_LEGACY
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 26>;
+ clocks = <&sysc MT7621_CLK_PCIE2>;
+ phys = <&pcie2_phy 0>;
+ phy-names = "pcie-phy2";
+#endif
};
};
pcie0_phy: pcie-phy@1e149000 {
compatible = "mediatek,mt7621-pci-phy";
reg = <0x1e149000 0x0700>;
+#ifndef DTS_LEGACY
+ clocks = <&sysc MT7621_CLK_XTAL>;
+#endif
#phy-cells = <1>;
};
pcie2_phy: pcie-phy@1e14a000 {
compatible = "mediatek,mt7621-pci-phy";
reg = <0x1e14a000 0x0700>;
+#ifndef DTS_LEGACY
+ clocks = <&sysc MT7621_CLK_XTAL>;
+#endif
#phy-cells = <1>;
};
};
KERNEL_DTB += -d21
DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME
+ifdef CONFIG_LINUX_5_10
+ DTS_CPPFLAGS += -DDTS_LEGACY
+endif
+
define Build/beeline-trx
echo -ne "hsqs" > $@.hsqs
$(STAGING_DIR_HOST)/bin/otrx create $@.trx -M 0x746f435d -f $@ \
--- /dev/null
+CONFIG_AF_UNIX_OOB=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BINARY_PRINTF=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOARD_SCACHE=y
+CONFIG_BOUNCE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKSRC_MIPS_GIC=y
+# CONFIG_CLKSRC_PISTACHIO is not set
+CONFIG_CLK_MT7621=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_BOSTON is not set
+# CONFIG_COMMON_CLK_PISTACHIO is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_TEO=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DIMLIB=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_GNUBEE1 is not set
+# CONFIG_DTB_GNUBEE2 is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MT7621=y
+# CONFIG_GPIO_RALINK is not set
+CONFIG_GPIO_WATCHDOG=y
+# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HIGHMEM=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_MT7621=y
+# CONFIG_INGENIC_CGU_JZ4760 is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_LED_TRIGGER_PHY=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LTO_NONE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MACH_NINTENDO64 is not set
+# CONFIG_MACH_REALTEK_RTL is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEDIATEK_GE_PHY=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIKROTIK=y
+CONFIG_MIKROTIK_RB_SYSFS=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+CONFIG_MIPS_CPC=y
+CONFIG_MIPS_CPS=y
+CONFIG_MIPS_CPS_CPUIDLE=y
+# CONFIG_MIPS_CPS_NS16550_BOOL is not set
+CONFIG_MIPS_CPS_PM=y
+CONFIG_MIPS_CPU_SCACHE=y
+CONFIG_MIPS_EBPF_JIT=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_GIC=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+CONFIG_MIPS_MT=y
+CONFIG_MIPS_MT_FPAFF=y
+CONFIG_MIPS_MT_SMP=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_NR_CPU_NR_MAP=4
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MT7621_WDT=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_MT7621=y
+CONFIG_MTD_NAND_MTK_BMT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_ROUTERBOOT_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_SPLIT_MINOR_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_VIRT_CONCAT=y
+# CONFIG_MTK_HSDMA is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_TAG_MTK=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_MEDIATEK_SOC=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SOCK_MSG=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NET_VENDOR_MEDIATEK=y
+# CONFIG_NET_VENDOR_RALINK is not set
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_PADATA=y
+CONFIG_PCI=y
+CONFIG_PCIE_MT7621=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_DRIVERS_GENERIC=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_INGENIC_USB is not set
+CONFIG_PHY_MT7621_PCI=y
+# CONFIG_PHY_PISTACHIO_USB is not set
+# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AW9523=y
+CONFIG_PINCTRL_MT7621=y
+# CONFIG_PINCTRL_PISTACHIO is not set
+CONFIG_PINCTRL_RALINK=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_SX150X=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RALINK=y
+# CONFIG_RALINK_WDT is not set
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BQ32K=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+# CONFIG_SCHED_CORE is not set
+CONFIG_SCHED_SMT=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOC_BUS=y
+# CONFIG_SOC_MT7620 is not set
+CONFIG_SOC_MT7621=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_MT7621=y
+# CONFIG_SPI_RT2880 is not set
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_MIPS_CPS=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Wed, 22 Sep 2021 07:00:34 +0200
+Subject: [PATCH] PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver
+
+Add driver for the PCIe controller of the MT7621 SoC.
+
+[bhelgaas: rename from pci-mt7621.c to pcie-mt7621.c; also rename Kconfig
+symbol from PCI_MT7621 to PCIE_MT7621]
+Link: https://lore.kernel.org/r/20210922050035.18162-3-sergio.paracuellos@gmail.com
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ rename drivers/{staging/mt7621-pci/pci-mt7621.c => pci/controller/pcie-mt7621.c} (95%)
+ delete mode 100644 drivers/staging/mt7621-pci/Kconfig
+ delete mode 100644 drivers/staging/mt7621-pci/Makefile
+ delete mode 100644 drivers/staging/mt7621-pci/TODO
+ delete mode 100644 drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -51,7 +51,8 @@ choice
+ select SYS_SUPPORTS_HIGHMEM
+ select MIPS_GIC
+ select CLKSRC_MIPS_GIC
+- select HAVE_PCI if PCI_MT7621
++ select HAVE_PCI
++ select PCI_DRIVERS_GENERIC
+ select SOC_BUS
+ endchoice
+
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -312,6 +312,14 @@ config PCIE_HISI_ERR
+ Say Y here if you want error handling support
+ for the PCIe controller's errors on HiSilicon HIP SoCs
+
++config PCIE_MT7621
++ tristate "MediaTek MT7621 PCIe Controller"
++ depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST)
++ select PHY_MT7621_PCI
++ default SOC_MT7621
++ help
++ This selects a driver for the MediaTek MT7621 PCIe Controller.
++
+ source "drivers/pci/controller/dwc/Kconfig"
+ source "drivers/pci/controller/mobiveil/Kconfig"
+ source "drivers/pci/controller/cadence/Kconfig"
+--- a/drivers/pci/controller/Makefile
++++ b/drivers/pci/controller/Makefile
+@@ -37,6 +37,8 @@ obj-$(CONFIG_VMD) += vmd.o
+ obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+ obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
+ obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
++obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
++
+ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+ obj-y += dwc/
+ obj-y += mobiveil/
+--- a/drivers/staging/Kconfig
++++ b/drivers/staging/Kconfig
+@@ -86,8 +86,6 @@ source "drivers/staging/vc04_services/Kc
+
+ source "drivers/staging/pi433/Kconfig"
+
+-source "drivers/staging/mt7621-pci/Kconfig"
+-
+ source "drivers/staging/mt7621-dma/Kconfig"
+
+ source "drivers/staging/ralink-gdma/Kconfig"
+--- a/drivers/staging/Makefile
++++ b/drivers/staging/Makefile
+@@ -33,7 +33,6 @@ obj-$(CONFIG_KS7010) += ks7010/
+ obj-$(CONFIG_GREYBUS) += greybus/
+ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
+ obj-$(CONFIG_PI433) += pi433/
+-obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
+ obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
+ obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
+ obj-$(CONFIG_SOC_MT7621) += mt7621-dts/
+--- a/drivers/staging/mt7621-pci/Kconfig
++++ /dev/null
+@@ -1,8 +0,0 @@
+-# SPDX-License-Identifier: GPL-2.0
+-config PCI_MT7621
+- tristate "MediaTek MT7621 PCI Controller"
+- depends on RALINK
+- select PCI_DRIVERS_GENERIC
+- help
+- This selects a driver for the MediaTek MT7621 PCI Controller.
+-
+--- a/drivers/staging/mt7621-pci/Makefile
++++ /dev/null
+@@ -1,2 +0,0 @@
+-# SPDX-License-Identifier: GPL-2.0
+-obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
+--- a/drivers/staging/mt7621-pci/TODO
++++ /dev/null
+@@ -1,4 +0,0 @@
+-
+-- general code review and cleanup
+-
+-Cc: NeilBrown <neil@brown.name>
+--- a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
++++ /dev/null
+@@ -1,104 +0,0 @@
+-MediaTek MT7621 PCIe controller
+-
+-Required properties:
+-- compatible: "mediatek,mt7621-pci"
+-- device_type: Must be "pci"
+-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+-- bus-range: Range of bus numbers associated with this controller.
+-- #address-cells: Address representation for root ports (must be 3)
+-- pinctrl-names : The pin control state names.
+-- pinctrl-0: The "default" pinctrl state.
+-- #size-cells: Size representation for root ports (must be 2)
+-- ranges: Ranges for the PCI memory and I/O regions.
+-- #interrupt-cells: Must be 1
+-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties.
+- Please refer to the standard PCI bus binding document for a more detailed
+- explanation.
+-- status: either "disabled" or "okay".
+-- resets: Must contain an entry for each entry in reset-names.
+- See ../reset/reset.txt for details.
+-- reset-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
+- root ports.
+-- clocks: Must contain an entry for each entry in clock-names.
+- See ../clocks/clock-bindings.txt for details.
+-- clock-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
+- root ports.
+-- reset-gpios: GPIO specs for the reset pins.
+-
+-In addition, the device tree node must have sub-nodes describing each PCIe port
+-interface, having the following mandatory properties:
+-
+-Required properties:
+-- reg: Only the first four bytes are used to refer to the correct bus number
+- and device number.
+-- #address-cells: Must be 3
+-- #size-cells: Must be 2
+-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+- property is sufficient.
+-- bus-range: Range of bus numbers associated with this port.
+-
+-Example for MT7621:
+-
+- pcie: pcie@1e140000 {
+- compatible = "mediatek,mt7621-pci";
+- reg = <0x1e140000 0x100 /* host-pci bridge registers */
+- 0x1e142000 0x100 /* pcie port 0 RC control registers */
+- 0x1e143000 0x100 /* pcie port 1 RC control registers */
+- 0x1e144000 0x100>; /* pcie port 2 RC control registers */
+-
+- #address-cells = <3>;
+- #size-cells = <2>;
+-
+- pinctrl-names = "default";
+- pinctrl-0 = <&pcie_pins>;
+-
+- device_type = "pci";
+-
+- bus-range = <0 255>;
+- ranges = <
+- 0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
+- 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
+- >;
+-
+- #interrupt-cells = <1>;
+- interrupt-map-mask = <0xF0000 0 0 1>;
+- interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+- <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+- <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+-
+- status = "disabled";
+-
+- resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
+- reset-names = "pcie0", "pcie1", "pcie2";
+- clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
+- clock-names = "pcie0", "pcie1", "pcie2";
+-
+- reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+- <&gpio 8 GPIO_ACTIVE_LOW>,
+- <&gpio 7 GPIO_ACTIVE_LOW>;
+-
+- pcie@0,0 {
+- reg = <0x0000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- ranges;
+- bus-range = <0x00 0xff>;
+- };
+-
+- pcie@1,0 {
+- reg = <0x0800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- ranges;
+- bus-range = <0x00 0xff>;
+- };
+-
+- pcie@2,0 {
+- reg = <0x1000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- ranges;
+- bus-range = <0x00 0xff>;
+- };
+- };
+-
+--- a/drivers/staging/mt7621-pci/pci-mt7621.c
++++ /dev/null
+@@ -1,600 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0+
+-/*
+- * BRIEF MODULE DESCRIPTION
+- * PCI init for Ralink RT2880 solution
+- *
+- * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
+- *
+- * May 2007 Bruce Chang
+- * Initial Release
+- *
+- * May 2009 Bruce Chang
+- * support RT2880/RT3883 PCIe
+- *
+- * May 2011 Bruce Chang
+- * support RT6855/MT7620 PCIe
+- */
+-
+-#include <linux/bitops.h>
+-#include <linux/clk.h>
+-#include <linux/delay.h>
+-#include <linux/gpio/consumer.h>
+-#include <linux/module.h>
+-#include <linux/of.h>
+-#include <linux/of_address.h>
+-#include <linux/of_pci.h>
+-#include <linux/of_platform.h>
+-#include <linux/pci.h>
+-#include <linux/phy/phy.h>
+-#include <linux/platform_device.h>
+-#include <linux/reset.h>
+-#include <linux/sys_soc.h>
+-
+-/* MediaTek specific configuration registers */
+-#define PCIE_FTS_NUM 0x70c
+-#define PCIE_FTS_NUM_MASK GENMASK(15, 8)
+-#define PCIE_FTS_NUM_L0(x) (((x) & 0xff) << 8)
+-
+-/* Host-PCI bridge registers */
+-#define RALINK_PCI_PCICFG_ADDR 0x0000
+-#define RALINK_PCI_PCIMSK_ADDR 0x000C
+-#define RALINK_PCI_CONFIG_ADDR 0x0020
+-#define RALINK_PCI_CONFIG_DATA 0x0024
+-#define RALINK_PCI_MEMBASE 0x0028
+-#define RALINK_PCI_IOBASE 0x002C
+-
+-/* PCIe RC control registers */
+-#define RALINK_PCI_ID 0x0030
+-#define RALINK_PCI_CLASS 0x0034
+-#define RALINK_PCI_SUBID 0x0038
+-#define RALINK_PCI_STATUS 0x0050
+-
+-/* Some definition values */
+-#define PCIE_REVISION_ID BIT(0)
+-#define PCIE_CLASS_CODE (0x60400 << 8)
+-#define PCIE_BAR_MAP_MAX GENMASK(30, 16)
+-#define PCIE_BAR_ENABLE BIT(0)
+-#define PCIE_PORT_INT_EN(x) BIT(20 + (x))
+-#define PCIE_PORT_LINKUP BIT(0)
+-#define PCIE_PORT_CNT 3
+-
+-#define PERST_DELAY_MS 100
+-
+-/**
+- * struct mt7621_pcie_port - PCIe port information
+- * @base: I/O mapped register base
+- * @list: port list
+- * @pcie: pointer to PCIe host info
+- * @clk: pointer to the port clock gate
+- * @phy: pointer to PHY control block
+- * @pcie_rst: pointer to port reset control
+- * @gpio_rst: gpio reset
+- * @slot: port slot
+- * @enabled: indicates if port is enabled
+- */
+-struct mt7621_pcie_port {
+- void __iomem *base;
+- struct list_head list;
+- struct mt7621_pcie *pcie;
+- struct clk *clk;
+- struct phy *phy;
+- struct reset_control *pcie_rst;
+- struct gpio_desc *gpio_rst;
+- u32 slot;
+- bool enabled;
+-};
+-
+-/**
+- * struct mt7621_pcie - PCIe host information
+- * @base: IO Mapped Register Base
+- * @dev: Pointer to PCIe device
+- * @ports: pointer to PCIe port information
+- * @resets_inverted: depends on chip revision
+- * reset lines are inverted.
+- */
+-struct mt7621_pcie {
+- void __iomem *base;
+- struct device *dev;
+- struct list_head ports;
+- bool resets_inverted;
+-};
+-
+-static inline u32 pcie_read(struct mt7621_pcie *pcie, u32 reg)
+-{
+- return readl_relaxed(pcie->base + reg);
+-}
+-
+-static inline void pcie_write(struct mt7621_pcie *pcie, u32 val, u32 reg)
+-{
+- writel_relaxed(val, pcie->base + reg);
+-}
+-
+-static inline void pcie_rmw(struct mt7621_pcie *pcie, u32 reg, u32 clr, u32 set)
+-{
+- u32 val = readl_relaxed(pcie->base + reg);
+-
+- val &= ~clr;
+- val |= set;
+- writel_relaxed(val, pcie->base + reg);
+-}
+-
+-static inline u32 pcie_port_read(struct mt7621_pcie_port *port, u32 reg)
+-{
+- return readl_relaxed(port->base + reg);
+-}
+-
+-static inline void pcie_port_write(struct mt7621_pcie_port *port,
+- u32 val, u32 reg)
+-{
+- writel_relaxed(val, port->base + reg);
+-}
+-
+-static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+- unsigned int func, unsigned int where)
+-{
+- return (((where & 0xF00) >> 8) << 24) | (bus << 16) | (slot << 11) |
+- (func << 8) | (where & 0xfc) | 0x80000000;
+-}
+-
+-static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
+- unsigned int devfn, int where)
+-{
+- struct mt7621_pcie *pcie = bus->sysdata;
+- u32 address = mt7621_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+- PCI_FUNC(devfn), where);
+-
+- writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
+-
+- return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
+-}
+-
+-struct pci_ops mt7621_pci_ops = {
+- .map_bus = mt7621_pcie_map_bus,
+- .read = pci_generic_config_read,
+- .write = pci_generic_config_write,
+-};
+-
+-static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
+-{
+- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
+-
+- pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
+- return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
+-}
+-
+-static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
+- u32 reg, u32 val)
+-{
+- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
+-
+- pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
+- pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
+-}
+-
+-static inline void mt7621_rst_gpio_pcie_assert(struct mt7621_pcie_port *port)
+-{
+- if (port->gpio_rst)
+- gpiod_set_value(port->gpio_rst, 1);
+-}
+-
+-static inline void mt7621_rst_gpio_pcie_deassert(struct mt7621_pcie_port *port)
+-{
+- if (port->gpio_rst)
+- gpiod_set_value(port->gpio_rst, 0);
+-}
+-
+-static inline bool mt7621_pcie_port_is_linkup(struct mt7621_pcie_port *port)
+-{
+- return (pcie_port_read(port, RALINK_PCI_STATUS) & PCIE_PORT_LINKUP) != 0;
+-}
+-
+-static inline void mt7621_control_assert(struct mt7621_pcie_port *port)
+-{
+- struct mt7621_pcie *pcie = port->pcie;
+-
+- if (pcie->resets_inverted)
+- reset_control_assert(port->pcie_rst);
+- else
+- reset_control_deassert(port->pcie_rst);
+-}
+-
+-static inline void mt7621_control_deassert(struct mt7621_pcie_port *port)
+-{
+- struct mt7621_pcie *pcie = port->pcie;
+-
+- if (pcie->resets_inverted)
+- reset_control_deassert(port->pcie_rst);
+- else
+- reset_control_assert(port->pcie_rst);
+-}
+-
+-static int setup_cm_memory_region(struct pci_host_bridge *host)
+-{
+- struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
+- struct device *dev = pcie->dev;
+- struct resource_entry *entry;
+- resource_size_t mask;
+-
+- entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
+- if (!entry) {
+- dev_err(dev, "Cannot get memory resource\n");
+- return -EINVAL;
+- }
+-
+- if (mips_cps_numiocu(0)) {
+- /*
+- * FIXME: hardware doesn't accept mask values with 1s after
+- * 0s (e.g. 0xffef), so it would be great to warn if that's
+- * about to happen
+- */
+- mask = ~(entry->res->end - entry->res->start);
+-
+- write_gcr_reg1_base(entry->res->start);
+- write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
+- dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
+- (unsigned long long)read_gcr_reg1_base(),
+- (unsigned long long)read_gcr_reg1_mask());
+- }
+-
+- return 0;
+-}
+-
+-static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
+- struct device_node *node,
+- int slot)
+-{
+- struct mt7621_pcie_port *port;
+- struct device *dev = pcie->dev;
+- struct platform_device *pdev = to_platform_device(dev);
+- char name[10];
+- int err;
+-
+- port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+- if (!port)
+- return -ENOMEM;
+-
+- port->base = devm_platform_ioremap_resource(pdev, slot + 1);
+- if (IS_ERR(port->base))
+- return PTR_ERR(port->base);
+-
+- port->clk = devm_get_clk_from_child(dev, node, NULL);
+- if (IS_ERR(port->clk)) {
+- dev_err(dev, "failed to get pcie%d clock\n", slot);
+- return PTR_ERR(port->clk);
+- }
+-
+- port->pcie_rst = of_reset_control_get_exclusive(node, NULL);
+- if (PTR_ERR(port->pcie_rst) == -EPROBE_DEFER) {
+- dev_err(dev, "failed to get pcie%d reset control\n", slot);
+- return PTR_ERR(port->pcie_rst);
+- }
+-
+- snprintf(name, sizeof(name), "pcie-phy%d", slot);
+- port->phy = devm_of_phy_get(dev, node, name);
+- if (IS_ERR(port->phy)) {
+- dev_err(dev, "failed to get pcie-phy%d\n", slot);
+- err = PTR_ERR(port->phy);
+- goto remove_reset;
+- }
+-
+- port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot,
+- GPIOD_OUT_LOW);
+- if (IS_ERR(port->gpio_rst)) {
+- dev_err(dev, "Failed to get GPIO for PCIe%d\n", slot);
+- err = PTR_ERR(port->gpio_rst);
+- goto remove_reset;
+- }
+-
+- port->slot = slot;
+- port->pcie = pcie;
+-
+- INIT_LIST_HEAD(&port->list);
+- list_add_tail(&port->list, &pcie->ports);
+-
+- return 0;
+-
+-remove_reset:
+- reset_control_put(port->pcie_rst);
+- return err;
+-}
+-
+-static int mt7621_pcie_parse_dt(struct mt7621_pcie *pcie)
+-{
+- struct device *dev = pcie->dev;
+- struct platform_device *pdev = to_platform_device(dev);
+- struct device_node *node = dev->of_node, *child;
+- int err;
+-
+- pcie->base = devm_platform_ioremap_resource(pdev, 0);
+- if (IS_ERR(pcie->base))
+- return PTR_ERR(pcie->base);
+-
+- for_each_available_child_of_node(node, child) {
+- int slot;
+-
+- err = of_pci_get_devfn(child);
+- if (err < 0) {
+- of_node_put(child);
+- dev_err(dev, "failed to parse devfn: %d\n", err);
+- return err;
+- }
+-
+- slot = PCI_SLOT(err);
+-
+- err = mt7621_pcie_parse_port(pcie, child, slot);
+- if (err) {
+- of_node_put(child);
+- return err;
+- }
+- }
+-
+- return 0;
+-}
+-
+-static int mt7621_pcie_init_port(struct mt7621_pcie_port *port)
+-{
+- struct mt7621_pcie *pcie = port->pcie;
+- struct device *dev = pcie->dev;
+- u32 slot = port->slot;
+- int err;
+-
+- err = phy_init(port->phy);
+- if (err) {
+- dev_err(dev, "failed to initialize port%d phy\n", slot);
+- return err;
+- }
+-
+- err = phy_power_on(port->phy);
+- if (err) {
+- dev_err(dev, "failed to power on port%d phy\n", slot);
+- phy_exit(port->phy);
+- return err;
+- }
+-
+- port->enabled = true;
+-
+- return 0;
+-}
+-
+-static void mt7621_pcie_reset_assert(struct mt7621_pcie *pcie)
+-{
+- struct mt7621_pcie_port *port;
+-
+- list_for_each_entry(port, &pcie->ports, list) {
+- /* PCIe RC reset assert */
+- mt7621_control_assert(port);
+-
+- /* PCIe EP reset assert */
+- mt7621_rst_gpio_pcie_assert(port);
+- }
+-
+- msleep(PERST_DELAY_MS);
+-}
+-
+-static void mt7621_pcie_reset_rc_deassert(struct mt7621_pcie *pcie)
+-{
+- struct mt7621_pcie_port *port;
+-
+- list_for_each_entry(port, &pcie->ports, list)
+- mt7621_control_deassert(port);
+-}
+-
+-static void mt7621_pcie_reset_ep_deassert(struct mt7621_pcie *pcie)
+-{
+- struct mt7621_pcie_port *port;
+-
+- list_for_each_entry(port, &pcie->ports, list)
+- mt7621_rst_gpio_pcie_deassert(port);
+-
+- msleep(PERST_DELAY_MS);
+-}
+-
+-static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
+-{
+- struct device *dev = pcie->dev;
+- struct mt7621_pcie_port *port, *tmp;
+- u8 num_disabled = 0;
+- int err;
+-
+- mt7621_pcie_reset_assert(pcie);
+- mt7621_pcie_reset_rc_deassert(pcie);
+-
+- list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+- u32 slot = port->slot;
+-
+- if (slot == 1) {
+- port->enabled = true;
+- continue;
+- }
+-
+- err = mt7621_pcie_init_port(port);
+- if (err) {
+- dev_err(dev, "Initiating port %d failed\n", slot);
+- list_del(&port->list);
+- }
+- }
+-
+- mt7621_pcie_reset_ep_deassert(pcie);
+-
+- tmp = NULL;
+- list_for_each_entry(port, &pcie->ports, list) {
+- u32 slot = port->slot;
+-
+- if (!mt7621_pcie_port_is_linkup(port)) {
+- dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
+- slot);
+- mt7621_control_assert(port);
+- port->enabled = false;
+- num_disabled++;
+-
+- if (slot == 0) {
+- tmp = port;
+- continue;
+- }
+-
+- if (slot == 1 && tmp && !tmp->enabled)
+- phy_power_off(tmp->phy);
+- }
+- }
+-
+- return (num_disabled != PCIE_PORT_CNT) ? 0 : -ENODEV;
+-}
+-
+-static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
+-{
+- struct mt7621_pcie *pcie = port->pcie;
+- u32 slot = port->slot;
+- u32 val;
+-
+- /* enable pcie interrupt */
+- val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
+- val |= PCIE_PORT_INT_EN(slot);
+- pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
+-
+- /* map 2G DDR region */
+- pcie_port_write(port, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
+- PCI_BASE_ADDRESS_0);
+-
+- /* configure class code and revision ID */
+- pcie_port_write(port, PCIE_CLASS_CODE | PCIE_REVISION_ID,
+- RALINK_PCI_CLASS);
+-
+- /* configure RC FTS number to 250 when it leaves L0s */
+- val = read_config(pcie, slot, PCIE_FTS_NUM);
+- val &= ~PCIE_FTS_NUM_MASK;
+- val |= PCIE_FTS_NUM_L0(0x50);
+- write_config(pcie, slot, PCIE_FTS_NUM, val);
+-}
+-
+-static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
+-{
+- struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
+- struct device *dev = pcie->dev;
+- struct mt7621_pcie_port *port;
+- struct resource_entry *entry;
+- int err;
+-
+- entry = resource_list_first_type(&host->windows, IORESOURCE_IO);
+- if (!entry) {
+- dev_err(dev, "Cannot get io resource\n");
+- return -EINVAL;
+- }
+-
+- /* Setup MEMWIN and IOWIN */
+- pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
+- pcie_write(pcie, entry->res->start, RALINK_PCI_IOBASE);
+-
+- list_for_each_entry(port, &pcie->ports, list) {
+- if (port->enabled) {
+- err = clk_prepare_enable(port->clk);
+- if (err) {
+- dev_err(dev, "enabling clk pcie%d\n",
+- port->slot);
+- return err;
+- }
+-
+- mt7621_pcie_enable_port(port);
+- dev_info(dev, "PCIE%d enabled\n", port->slot);
+- }
+- }
+-
+- return 0;
+-}
+-
+-static int mt7621_pcie_register_host(struct pci_host_bridge *host)
+-{
+- struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
+-
+- host->ops = &mt7621_pci_ops;
+- host->sysdata = pcie;
+- return pci_host_probe(host);
+-}
+-
+-static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+- { .soc_id = "mt7621", .revision = "E2" }
+-};
+-
+-static int mt7621_pci_probe(struct platform_device *pdev)
+-{
+- struct device *dev = &pdev->dev;
+- const struct soc_device_attribute *attr;
+- struct mt7621_pcie_port *port;
+- struct mt7621_pcie *pcie;
+- struct pci_host_bridge *bridge;
+- int err;
+-
+- if (!dev->of_node)
+- return -ENODEV;
+-
+- bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
+- if (!bridge)
+- return -ENOMEM;
+-
+- pcie = pci_host_bridge_priv(bridge);
+- pcie->dev = dev;
+- platform_set_drvdata(pdev, pcie);
+- INIT_LIST_HEAD(&pcie->ports);
+-
+- attr = soc_device_match(mt7621_pci_quirks_match);
+- if (attr)
+- pcie->resets_inverted = true;
+-
+- err = mt7621_pcie_parse_dt(pcie);
+- if (err) {
+- dev_err(dev, "Parsing DT failed\n");
+- return err;
+- }
+-
+- err = mt7621_pcie_init_ports(pcie);
+- if (err) {
+- dev_err(dev, "Nothing connected in virtual bridges\n");
+- return 0;
+- }
+-
+- err = mt7621_pcie_enable_ports(bridge);
+- if (err) {
+- dev_err(dev, "Error enabling pcie ports\n");
+- goto remove_resets;
+- }
+-
+- err = setup_cm_memory_region(bridge);
+- if (err) {
+- dev_err(dev, "Error setting up iocu mem regions\n");
+- goto remove_resets;
+- }
+-
+- return mt7621_pcie_register_host(bridge);
+-
+-remove_resets:
+- list_for_each_entry(port, &pcie->ports, list)
+- reset_control_put(port->pcie_rst);
+-
+- return err;
+-}
+-
+-static int mt7621_pci_remove(struct platform_device *pdev)
+-{
+- struct mt7621_pcie *pcie = platform_get_drvdata(pdev);
+- struct mt7621_pcie_port *port;
+-
+- list_for_each_entry(port, &pcie->ports, list)
+- reset_control_put(port->pcie_rst);
+-
+- return 0;
+-}
+-
+-static const struct of_device_id mt7621_pci_ids[] = {
+- { .compatible = "mediatek,mt7621-pci" },
+- {},
+-};
+-MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
+-
+-static struct platform_driver mt7621_pci_driver = {
+- .probe = mt7621_pci_probe,
+- .remove = mt7621_pci_remove,
+- .driver = {
+- .name = "mt7621-pci",
+- .of_match_table = of_match_ptr(mt7621_pci_ids),
+- },
+-};
+-builtin_platform_driver(mt7621_pci_driver);
+--- /dev/null
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -0,0 +1,600 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * BRIEF MODULE DESCRIPTION
++ * PCI init for Ralink RT2880 solution
++ *
++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
++ *
++ * May 2007 Bruce Chang
++ * Initial Release
++ *
++ * May 2009 Bruce Chang
++ * support RT2880/RT3883 PCIe
++ *
++ * May 2011 Bruce Chang
++ * support RT6855/MT7620 PCIe
++ */
++
++#include <linux/bitops.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/gpio/consumer.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_pci.h>
++#include <linux/of_platform.h>
++#include <linux/pci.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/reset.h>
++#include <linux/sys_soc.h>
++
++/* MediaTek-specific configuration registers */
++#define PCIE_FTS_NUM 0x70c
++#define PCIE_FTS_NUM_MASK GENMASK(15, 8)
++#define PCIE_FTS_NUM_L0(x) (((x) & 0xff) << 8)
++
++/* Host-PCI bridge registers */
++#define RALINK_PCI_PCICFG_ADDR 0x0000
++#define RALINK_PCI_PCIMSK_ADDR 0x000c
++#define RALINK_PCI_CONFIG_ADDR 0x0020
++#define RALINK_PCI_CONFIG_DATA 0x0024
++#define RALINK_PCI_MEMBASE 0x0028
++#define RALINK_PCI_IOBASE 0x002c
++
++/* PCIe RC control registers */
++#define RALINK_PCI_ID 0x0030
++#define RALINK_PCI_CLASS 0x0034
++#define RALINK_PCI_SUBID 0x0038
++#define RALINK_PCI_STATUS 0x0050
++
++/* Some definition values */
++#define PCIE_REVISION_ID BIT(0)
++#define PCIE_CLASS_CODE (0x60400 << 8)
++#define PCIE_BAR_MAP_MAX GENMASK(30, 16)
++#define PCIE_BAR_ENABLE BIT(0)
++#define PCIE_PORT_INT_EN(x) BIT(20 + (x))
++#define PCIE_PORT_LINKUP BIT(0)
++#define PCIE_PORT_CNT 3
++
++#define PERST_DELAY_MS 100
++
++/**
++ * struct mt7621_pcie_port - PCIe port information
++ * @base: I/O mapped register base
++ * @list: port list
++ * @pcie: pointer to PCIe host info
++ * @clk: pointer to the port clock gate
++ * @phy: pointer to PHY control block
++ * @pcie_rst: pointer to port reset control
++ * @gpio_rst: gpio reset
++ * @slot: port slot
++ * @enabled: indicates if port is enabled
++ */
++struct mt7621_pcie_port {
++ void __iomem *base;
++ struct list_head list;
++ struct mt7621_pcie *pcie;
++ struct clk *clk;
++ struct phy *phy;
++ struct reset_control *pcie_rst;
++ struct gpio_desc *gpio_rst;
++ u32 slot;
++ bool enabled;
++};
++
++/**
++ * struct mt7621_pcie - PCIe host information
++ * @base: IO Mapped Register Base
++ * @dev: Pointer to PCIe device
++ * @ports: pointer to PCIe port information
++ * @resets_inverted: depends on chip revision
++ * reset lines are inverted.
++ */
++struct mt7621_pcie {
++ void __iomem *base;
++ struct device *dev;
++ struct list_head ports;
++ bool resets_inverted;
++};
++
++static inline u32 pcie_read(struct mt7621_pcie *pcie, u32 reg)
++{
++ return readl_relaxed(pcie->base + reg);
++}
++
++static inline void pcie_write(struct mt7621_pcie *pcie, u32 val, u32 reg)
++{
++ writel_relaxed(val, pcie->base + reg);
++}
++
++static inline void pcie_rmw(struct mt7621_pcie *pcie, u32 reg, u32 clr, u32 set)
++{
++ u32 val = readl_relaxed(pcie->base + reg);
++
++ val &= ~clr;
++ val |= set;
++ writel_relaxed(val, pcie->base + reg);
++}
++
++static inline u32 pcie_port_read(struct mt7621_pcie_port *port, u32 reg)
++{
++ return readl_relaxed(port->base + reg);
++}
++
++static inline void pcie_port_write(struct mt7621_pcie_port *port,
++ u32 val, u32 reg)
++{
++ writel_relaxed(val, port->base + reg);
++}
++
++static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
++ unsigned int func, unsigned int where)
++{
++ return (((where & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
++ (func << 8) | (where & 0xfc) | 0x80000000;
++}
++
++static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
++ unsigned int devfn, int where)
++{
++ struct mt7621_pcie *pcie = bus->sysdata;
++ u32 address = mt7621_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++ PCI_FUNC(devfn), where);
++
++ writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
++
++ return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
++}
++
++struct pci_ops mt7621_pci_ops = {
++ .map_bus = mt7621_pcie_map_bus,
++ .read = pci_generic_config_read,
++ .write = pci_generic_config_write,
++};
++
++static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
++{
++ u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
++
++ pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
++ return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
++}
++
++static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
++ u32 reg, u32 val)
++{
++ u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
++
++ pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
++ pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
++}
++
++static inline void mt7621_rst_gpio_pcie_assert(struct mt7621_pcie_port *port)
++{
++ if (port->gpio_rst)
++ gpiod_set_value(port->gpio_rst, 1);
++}
++
++static inline void mt7621_rst_gpio_pcie_deassert(struct mt7621_pcie_port *port)
++{
++ if (port->gpio_rst)
++ gpiod_set_value(port->gpio_rst, 0);
++}
++
++static inline bool mt7621_pcie_port_is_linkup(struct mt7621_pcie_port *port)
++{
++ return (pcie_port_read(port, RALINK_PCI_STATUS) & PCIE_PORT_LINKUP) != 0;
++}
++
++static inline void mt7621_control_assert(struct mt7621_pcie_port *port)
++{
++ struct mt7621_pcie *pcie = port->pcie;
++
++ if (pcie->resets_inverted)
++ reset_control_assert(port->pcie_rst);
++ else
++ reset_control_deassert(port->pcie_rst);
++}
++
++static inline void mt7621_control_deassert(struct mt7621_pcie_port *port)
++{
++ struct mt7621_pcie *pcie = port->pcie;
++
++ if (pcie->resets_inverted)
++ reset_control_deassert(port->pcie_rst);
++ else
++ reset_control_assert(port->pcie_rst);
++}
++
++static int setup_cm_memory_region(struct pci_host_bridge *host)
++{
++ struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
++ struct device *dev = pcie->dev;
++ struct resource_entry *entry;
++ resource_size_t mask;
++
++ entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
++ if (!entry) {
++ dev_err(dev, "cannot get memory resource\n");
++ return -EINVAL;
++ }
++
++ if (mips_cps_numiocu(0)) {
++ /*
++ * FIXME: hardware doesn't accept mask values with 1s after
++ * 0s (e.g. 0xffef), so it would be great to warn if that's
++ * about to happen
++ */
++ mask = ~(entry->res->end - entry->res->start);
++
++ write_gcr_reg1_base(entry->res->start);
++ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
++ dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
++ (unsigned long long)read_gcr_reg1_base(),
++ (unsigned long long)read_gcr_reg1_mask());
++ }
++
++ return 0;
++}
++
++static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
++ struct device_node *node,
++ int slot)
++{
++ struct mt7621_pcie_port *port;
++ struct device *dev = pcie->dev;
++ struct platform_device *pdev = to_platform_device(dev);
++ char name[10];
++ int err;
++
++ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
++ if (!port)
++ return -ENOMEM;
++
++ port->base = devm_platform_ioremap_resource(pdev, slot + 1);
++ if (IS_ERR(port->base))
++ return PTR_ERR(port->base);
++
++ port->clk = devm_get_clk_from_child(dev, node, NULL);
++ if (IS_ERR(port->clk)) {
++ dev_err(dev, "failed to get pcie%d clock\n", slot);
++ return PTR_ERR(port->clk);
++ }
++
++ port->pcie_rst = of_reset_control_get_exclusive(node, NULL);
++ if (PTR_ERR(port->pcie_rst) == -EPROBE_DEFER) {
++ dev_err(dev, "failed to get pcie%d reset control\n", slot);
++ return PTR_ERR(port->pcie_rst);
++ }
++
++ snprintf(name, sizeof(name), "pcie-phy%d", slot);
++ port->phy = devm_of_phy_get(dev, node, name);
++ if (IS_ERR(port->phy)) {
++ dev_err(dev, "failed to get pcie-phy%d\n", slot);
++ err = PTR_ERR(port->phy);
++ goto remove_reset;
++ }
++
++ port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot,
++ GPIOD_OUT_LOW);
++ if (IS_ERR(port->gpio_rst)) {
++ dev_err(dev, "failed to get GPIO for PCIe%d\n", slot);
++ err = PTR_ERR(port->gpio_rst);
++ goto remove_reset;
++ }
++
++ port->slot = slot;
++ port->pcie = pcie;
++
++ INIT_LIST_HEAD(&port->list);
++ list_add_tail(&port->list, &pcie->ports);
++
++ return 0;
++
++remove_reset:
++ reset_control_put(port->pcie_rst);
++ return err;
++}
++
++static int mt7621_pcie_parse_dt(struct mt7621_pcie *pcie)
++{
++ struct device *dev = pcie->dev;
++ struct platform_device *pdev = to_platform_device(dev);
++ struct device_node *node = dev->of_node, *child;
++ int err;
++
++ pcie->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(pcie->base))
++ return PTR_ERR(pcie->base);
++
++ for_each_available_child_of_node(node, child) {
++ int slot;
++
++ err = of_pci_get_devfn(child);
++ if (err < 0) {
++ of_node_put(child);
++ dev_err(dev, "failed to parse devfn: %d\n", err);
++ return err;
++ }
++
++ slot = PCI_SLOT(err);
++
++ err = mt7621_pcie_parse_port(pcie, child, slot);
++ if (err) {
++ of_node_put(child);
++ return err;
++ }
++ }
++
++ return 0;
++}
++
++static int mt7621_pcie_init_port(struct mt7621_pcie_port *port)
++{
++ struct mt7621_pcie *pcie = port->pcie;
++ struct device *dev = pcie->dev;
++ u32 slot = port->slot;
++ int err;
++
++ err = phy_init(port->phy);
++ if (err) {
++ dev_err(dev, "failed to initialize port%d phy\n", slot);
++ return err;
++ }
++
++ err = phy_power_on(port->phy);
++ if (err) {
++ dev_err(dev, "failed to power on port%d phy\n", slot);
++ phy_exit(port->phy);
++ return err;
++ }
++
++ port->enabled = true;
++
++ return 0;
++}
++
++static void mt7621_pcie_reset_assert(struct mt7621_pcie *pcie)
++{
++ struct mt7621_pcie_port *port;
++
++ list_for_each_entry(port, &pcie->ports, list) {
++ /* PCIe RC reset assert */
++ mt7621_control_assert(port);
++
++ /* PCIe EP reset assert */
++ mt7621_rst_gpio_pcie_assert(port);
++ }
++
++ msleep(PERST_DELAY_MS);
++}
++
++static void mt7621_pcie_reset_rc_deassert(struct mt7621_pcie *pcie)
++{
++ struct mt7621_pcie_port *port;
++
++ list_for_each_entry(port, &pcie->ports, list)
++ mt7621_control_deassert(port);
++}
++
++static void mt7621_pcie_reset_ep_deassert(struct mt7621_pcie *pcie)
++{
++ struct mt7621_pcie_port *port;
++
++ list_for_each_entry(port, &pcie->ports, list)
++ mt7621_rst_gpio_pcie_deassert(port);
++
++ msleep(PERST_DELAY_MS);
++}
++
++static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
++{
++ struct device *dev = pcie->dev;
++ struct mt7621_pcie_port *port, *tmp;
++ u8 num_disabled = 0;
++ int err;
++
++ mt7621_pcie_reset_assert(pcie);
++ mt7621_pcie_reset_rc_deassert(pcie);
++
++ list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
++ u32 slot = port->slot;
++
++ if (slot == 1) {
++ port->enabled = true;
++ continue;
++ }
++
++ err = mt7621_pcie_init_port(port);
++ if (err) {
++ dev_err(dev, "initializing port %d failed\n", slot);
++ list_del(&port->list);
++ }
++ }
++
++ mt7621_pcie_reset_ep_deassert(pcie);
++
++ tmp = NULL;
++ list_for_each_entry(port, &pcie->ports, list) {
++ u32 slot = port->slot;
++
++ if (!mt7621_pcie_port_is_linkup(port)) {
++ dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
++ slot);
++ mt7621_control_assert(port);
++ port->enabled = false;
++ num_disabled++;
++
++ if (slot == 0) {
++ tmp = port;
++ continue;
++ }
++
++ if (slot == 1 && tmp && !tmp->enabled)
++ phy_power_off(tmp->phy);
++ }
++ }
++
++ return (num_disabled != PCIE_PORT_CNT) ? 0 : -ENODEV;
++}
++
++static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
++{
++ struct mt7621_pcie *pcie = port->pcie;
++ u32 slot = port->slot;
++ u32 val;
++
++ /* enable pcie interrupt */
++ val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
++ val |= PCIE_PORT_INT_EN(slot);
++ pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
++
++ /* map 2G DDR region */
++ pcie_port_write(port, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
++ PCI_BASE_ADDRESS_0);
++
++ /* configure class code and revision ID */
++ pcie_port_write(port, PCIE_CLASS_CODE | PCIE_REVISION_ID,
++ RALINK_PCI_CLASS);
++
++ /* configure RC FTS number to 250 when it leaves L0s */
++ val = read_config(pcie, slot, PCIE_FTS_NUM);
++ val &= ~PCIE_FTS_NUM_MASK;
++ val |= PCIE_FTS_NUM_L0(0x50);
++ write_config(pcie, slot, PCIE_FTS_NUM, val);
++}
++
++static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
++{
++ struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
++ struct device *dev = pcie->dev;
++ struct mt7621_pcie_port *port;
++ struct resource_entry *entry;
++ int err;
++
++ entry = resource_list_first_type(&host->windows, IORESOURCE_IO);
++ if (!entry) {
++ dev_err(dev, "cannot get io resource\n");
++ return -EINVAL;
++ }
++
++ /* Setup MEMWIN and IOWIN */
++ pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
++ pcie_write(pcie, entry->res->start, RALINK_PCI_IOBASE);
++
++ list_for_each_entry(port, &pcie->ports, list) {
++ if (port->enabled) {
++ err = clk_prepare_enable(port->clk);
++ if (err) {
++ dev_err(dev, "enabling clk pcie%d\n",
++ port->slot);
++ return err;
++ }
++
++ mt7621_pcie_enable_port(port);
++ dev_info(dev, "PCIE%d enabled\n", port->slot);
++ }
++ }
++
++ return 0;
++}
++
++static int mt7621_pcie_register_host(struct pci_host_bridge *host)
++{
++ struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
++
++ host->ops = &mt7621_pci_ops;
++ host->sysdata = pcie;
++ return pci_host_probe(host);
++}
++
++static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
++ { .soc_id = "mt7621", .revision = "E2" }
++};
++
++static int mt7621_pci_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ const struct soc_device_attribute *attr;
++ struct mt7621_pcie_port *port;
++ struct mt7621_pcie *pcie;
++ struct pci_host_bridge *bridge;
++ int err;
++
++ if (!dev->of_node)
++ return -ENODEV;
++
++ bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
++ if (!bridge)
++ return -ENOMEM;
++
++ pcie = pci_host_bridge_priv(bridge);
++ pcie->dev = dev;
++ platform_set_drvdata(pdev, pcie);
++ INIT_LIST_HEAD(&pcie->ports);
++
++ attr = soc_device_match(mt7621_pci_quirks_match);
++ if (attr)
++ pcie->resets_inverted = true;
++
++ err = mt7621_pcie_parse_dt(pcie);
++ if (err) {
++ dev_err(dev, "parsing DT failed\n");
++ return err;
++ }
++
++ err = mt7621_pcie_init_ports(pcie);
++ if (err) {
++ dev_err(dev, "nothing connected in virtual bridges\n");
++ return 0;
++ }
++
++ err = mt7621_pcie_enable_ports(bridge);
++ if (err) {
++ dev_err(dev, "error enabling pcie ports\n");
++ goto remove_resets;
++ }
++
++ err = setup_cm_memory_region(bridge);
++ if (err) {
++ dev_err(dev, "error setting up iocu mem regions\n");
++ goto remove_resets;
++ }
++
++ return mt7621_pcie_register_host(bridge);
++
++remove_resets:
++ list_for_each_entry(port, &pcie->ports, list)
++ reset_control_put(port->pcie_rst);
++
++ return err;
++}
++
++static int mt7621_pci_remove(struct platform_device *pdev)
++{
++ struct mt7621_pcie *pcie = platform_get_drvdata(pdev);
++ struct mt7621_pcie_port *port;
++
++ list_for_each_entry(port, &pcie->ports, list)
++ reset_control_put(port->pcie_rst);
++
++ return 0;
++}
++
++static const struct of_device_id mt7621_pci_ids[] = {
++ { .compatible = "mediatek,mt7621-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
++
++static struct platform_driver mt7621_pci_driver = {
++ .probe = mt7621_pci_probe,
++ .remove = mt7621_pci_remove,
++ .driver = {
++ .name = "mt7621-pci",
++ .of_match_table = of_match_ptr(mt7621_pci_ids),
++ },
++};
++builtin_platform_driver(mt7621_pci_driver);
--- /dev/null
+From: Bjorn Helgaas <bhelgaas@google.com>
+Date: Wed, 22 Dec 2021 19:10:48 -0600
+Subject: [PATCH] PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
+
+Rename mt7621_pci_* structs and functions to mt7621_pcie_* for consistency
+with the rest of the file.
+
+Link: https://lore.kernel.org/r/20211223011054.1227810-18-helgaas@kernel.org
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Cc: Matthias Brugger <matthias.bgg@gmail.com>
+---
+
+--- a/drivers/pci/controller/pcie-mt7621.c
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -93,8 +93,8 @@ struct mt7621_pcie_port {
+ * reset lines are inverted.
+ */
+ struct mt7621_pcie {
+- void __iomem *base;
+ struct device *dev;
++ void __iomem *base;
+ struct list_head ports;
+ bool resets_inverted;
+ };
+@@ -129,7 +129,7 @@ static inline void pcie_port_write(struc
+ writel_relaxed(val, port->base + reg);
+ }
+
+-static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
++static inline u32 mt7621_pcie_get_cfgaddr(unsigned int bus, unsigned int slot,
+ unsigned int func, unsigned int where)
+ {
+ return (((where & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
+@@ -140,7 +140,7 @@ static void __iomem *mt7621_pcie_map_bus
+ unsigned int devfn, int where)
+ {
+ struct mt7621_pcie *pcie = bus->sysdata;
+- u32 address = mt7621_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++ u32 address = mt7621_pcie_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
+@@ -148,7 +148,7 @@ static void __iomem *mt7621_pcie_map_bus
+ return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
+ }
+
+-struct pci_ops mt7621_pci_ops = {
++struct pci_ops mt7621_pcie_ops = {
+ .map_bus = mt7621_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+@@ -156,7 +156,7 @@ struct pci_ops mt7621_pci_ops = {
+
+ static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
+ {
+- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
++ u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
+
+ pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
+ return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
+@@ -165,7 +165,7 @@ static u32 read_config(struct mt7621_pci
+ static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
+ u32 reg, u32 val)
+ {
+- u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
++ u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
+
+ pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
+ pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
+@@ -505,16 +505,16 @@ static int mt7621_pcie_register_host(str
+ {
+ struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
+
+- host->ops = &mt7621_pci_ops;
++ host->ops = &mt7621_pcie_ops;
+ host->sysdata = pcie;
+ return pci_host_probe(host);
+ }
+
+-static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
++static const struct soc_device_attribute mt7621_pcie_quirks_match[] = {
+ { .soc_id = "mt7621", .revision = "E2" }
+ };
+
+-static int mt7621_pci_probe(struct platform_device *pdev)
++static int mt7621_pcie_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+ const struct soc_device_attribute *attr;
+@@ -535,7 +535,7 @@ static int mt7621_pci_probe(struct platf
+ platform_set_drvdata(pdev, pcie);
+ INIT_LIST_HEAD(&pcie->ports);
+
+- attr = soc_device_match(mt7621_pci_quirks_match);
++ attr = soc_device_match(mt7621_pcie_quirks_match);
+ if (attr)
+ pcie->resets_inverted = true;
+
+@@ -572,7 +572,7 @@ remove_resets:
+ return err;
+ }
+
+-static int mt7621_pci_remove(struct platform_device *pdev)
++static int mt7621_pcie_remove(struct platform_device *pdev)
+ {
+ struct mt7621_pcie *pcie = platform_get_drvdata(pdev);
+ struct mt7621_pcie_port *port;
+@@ -583,18 +583,18 @@ static int mt7621_pci_remove(struct plat
+ return 0;
+ }
+
+-static const struct of_device_id mt7621_pci_ids[] = {
++static const struct of_device_id mt7621_pcie_ids[] = {
+ { .compatible = "mediatek,mt7621-pci" },
+ {},
+ };
+-MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
++MODULE_DEVICE_TABLE(of, mt7621_pcie_ids);
+
+-static struct platform_driver mt7621_pci_driver = {
+- .probe = mt7621_pci_probe,
+- .remove = mt7621_pci_remove,
++static struct platform_driver mt7621_pcie_driver = {
++ .probe = mt7621_pcie_probe,
++ .remove = mt7621_pcie_remove,
+ .driver = {
+ .name = "mt7621-pci",
+- .of_match_table = of_match_ptr(mt7621_pci_ids),
++ .of_match_table = of_match_ptr(mt7621_pcie_ids),
+ },
+ };
+-builtin_platform_driver(mt7621_pci_driver);
++builtin_platform_driver(mt7621_pcie_driver);
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Wed, 17 Nov 2021 16:29:52 +0100
+Subject: [PATCH] PCI: mt7621: Declare mt7621_pci_ops static
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Sparse complains about mt7621_pci_ops symbol is not declared and asks if
+it should be declared as static instead. Sparse is right. Hence declare
+symbol as static.
+
+Link: https://lore.kernel.org/r/20211117152952.12271-1-sergio.paracuellos@gmail.com
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
+---
+
+--- a/drivers/pci/controller/pcie-mt7621.c
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -148,7 +148,7 @@ static void __iomem *mt7621_pcie_map_bus
+ return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
+ }
+
+-struct pci_ops mt7621_pcie_ops = {
++static struct pci_ops mt7621_pcie_ops = {
+ .map_bus = mt7621_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Tue, 7 Dec 2021 11:49:21 +0100
+Subject: [PATCH] PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
+
+On the MIPS ralink mt7621 platform, we need to set up I/O coherency units
+based on the host bridge apertures.
+
+To remove this arch dependency from the driver itself, move the coherency
+setup from the driver to pcibios_root_bridge_prepare().
+
+[bhelgaas: squash add/remove into one patch, commit log]
+Link: https://lore.kernel.org/r/20211207104924.21327-3-sergio.paracuellos@gmail.com
+Link: https://lore.kernel.org/r/20211207104924.21327-4-sergio.paracuellos@gmail.com
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Guenter Roeck <linux@roeck-us.net> # arch/mips
+Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> # arch/mips
+---
+
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -10,6 +10,8 @@
+ #include <linux/slab.h>
+ #include <linux/sys_soc.h>
+ #include <linux/memblock.h>
++#include <linux/pci.h>
++#include <linux/bug.h>
+
+ #include <asm/bootinfo.h>
+ #include <asm/mipsregs.h>
+@@ -24,6 +26,35 @@
+
+ static u32 detect_magic __initdata;
+
++int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
++{
++ struct resource_entry *entry;
++ resource_size_t mask;
++
++ entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
++ if (!entry) {
++ pr_err("Cannot get memory resource\n");
++ return -EINVAL;
++ }
++
++ if (mips_cps_numiocu(0)) {
++ /*
++ * Hardware doesn't accept mask values with 1s after
++ * 0s (e.g. 0xffef), so warn if that's happen
++ */
++ mask = ~(entry->res->end - entry->res->start) & CM_GCR_REGn_MASK_ADDRMASK;
++ WARN_ON(mask && BIT(ffz(~mask)) - 1 != ~mask);
++
++ write_gcr_reg1_base(entry->res->start);
++ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
++ pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
++ (unsigned long long)read_gcr_reg1_base(),
++ (unsigned long long)read_gcr_reg1_mask());
++ }
++
++ return 0;
++}
++
+ phys_addr_t mips_cpc_default_phys_base(void)
+ {
+ panic("Cannot detect cpc address");
+--- a/drivers/pci/controller/pcie-mt7621.c
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -208,37 +208,6 @@ static inline void mt7621_control_deasse
+ reset_control_assert(port->pcie_rst);
+ }
+
+-static int setup_cm_memory_region(struct pci_host_bridge *host)
+-{
+- struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
+- struct device *dev = pcie->dev;
+- struct resource_entry *entry;
+- resource_size_t mask;
+-
+- entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
+- if (!entry) {
+- dev_err(dev, "cannot get memory resource\n");
+- return -EINVAL;
+- }
+-
+- if (mips_cps_numiocu(0)) {
+- /*
+- * FIXME: hardware doesn't accept mask values with 1s after
+- * 0s (e.g. 0xffef), so it would be great to warn if that's
+- * about to happen
+- */
+- mask = ~(entry->res->end - entry->res->start);
+-
+- write_gcr_reg1_base(entry->res->start);
+- write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
+- dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
+- (unsigned long long)read_gcr_reg1_base(),
+- (unsigned long long)read_gcr_reg1_mask());
+- }
+-
+- return 0;
+-}
+-
+ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
+ struct device_node *node,
+ int slot)
+@@ -557,12 +526,6 @@ static int mt7621_pcie_probe(struct plat
+ goto remove_resets;
+ }
+
+- err = setup_cm_memory_region(bridge);
+- if (err) {
+- dev_err(dev, "error setting up iocu mem regions\n");
+- goto remove_resets;
+- }
+-
+ return mt7621_pcie_register_host(bridge);
+
+ remove_resets:
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Mon, 24 Jan 2022 12:30:02 +0100
+Subject: [PATCH] PCI: mt7621: Drop of_match_ptr() to avoid unused variable
+
+We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
+allow building of pcie-mt7621.c in that case for compile testing.
+
+When CONFIG_OF is not set, "of_match_ptr(mt7621_pcie_ids)" compiles to
+NULL, which leaves mt7621_pcie_ids unused:
+
+ $ make W=1
+ drivers/pci/controller/pcie-mt7621.c:549:34: warning: unused variable 'mt7621_pcie_ids' [-Wunused-const-variable]
+
+Drop of_match_ptr() to avoid the unused variable warning.
+
+[bhelgaas: commit log]
+Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
+Link: https://lore.kernel.org/r/20220124113003.406224-2-sergio.paracuellos@gmail.com
+Link: https://lore.kernel.org/r/202201241754.igtHzgHv-lkp@intel.com
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+---
+
+--- a/drivers/pci/controller/pcie-mt7621.c
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -557,7 +557,7 @@ static struct platform_driver mt7621_pci
+ .remove = mt7621_pcie_remove,
+ .driver = {
+ .name = "mt7621-pci",
+- .of_match_table = of_match_ptr(mt7621_pcie_ids),
++ .of_match_table = mt7621_pcie_ids,
+ },
+ };
+ builtin_platform_driver(mt7621_pcie_driver);
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Mon, 24 Jan 2022 12:30:03 +0100
+Subject: [PATCH] PCI: mt7621: Remove unused function pcie_rmw()
+
+Function pcie_rmw() is not being used at all and can be deleted. Hence get
+rid of it, which fixes this warning:
+
+ drivers/pci/controller/pcie-mt7621.c:112:20: warning: unused function 'pcie_rmw' [-Wunused-function]
+
+Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
+Link: https://lore.kernel.org/r/20220124113003.406224-3-sergio.paracuellos@gmail.com
+Link: https://lore.kernel.org/all/202201241754.igtHzgHv-lkp@intel.com/
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+---
+
+--- a/drivers/pci/controller/pcie-mt7621.c
++++ b/drivers/pci/controller/pcie-mt7621.c
+@@ -109,15 +109,6 @@ static inline void pcie_write(struct mt7
+ writel_relaxed(val, pcie->base + reg);
+ }
+
+-static inline void pcie_rmw(struct mt7621_pcie *pcie, u32 reg, u32 clr, u32 set)
+-{
+- u32 val = readl_relaxed(pcie->base + reg);
+-
+- val &= ~clr;
+- val |= set;
+- writel_relaxed(val, pcie->base + reg);
+-}
+-
+ static inline u32 pcie_port_read(struct mt7621_pcie_port *port, u32 reg)
+ {
+ return readl_relaxed(port->base + reg);
--- /dev/null
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Tue, 7 Dec 2021 11:49:20 +0100
+Subject: [PATCH] PCI: Let pcibios_root_bridge_prepare() access bridge->windows
+
+When pci_register_host_bridge() is called, bridge->windows are already
+available. However these windows are being moved temporarily from there.
+
+To let pcibios_root_bridge_prepare() have access to these windows, move the
+windows movement after calling this function. This is useful for the MIPS
+ralink mt7621 platform so it can set up I/O coherence units and avoid
+custom MIPS code in the mt7621 PCIe controller driver.
+
+Link: https://lore.kernel.org/r/20211207104924.21327-2-sergio.paracuellos@gmail.com
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Acked-by: Arnd Bergmann <arnd@arndb.de>
+---
+
+--- a/drivers/pci/probe.c
++++ b/drivers/pci/probe.c
+@@ -898,8 +898,6 @@ static int pci_register_host_bridge(stru
+
+ bridge->bus = bus;
+
+- /* Temporarily move resources off the list */
+- list_splice_init(&bridge->windows, &resources);
+ bus->sysdata = bridge->sysdata;
+ bus->ops = bridge->ops;
+ bus->number = bus->busn_res.start = bridge->busnr;
+@@ -925,6 +923,8 @@ static int pci_register_host_bridge(stru
+ if (err)
+ goto free;
+
++ /* Temporarily move resources off the list */
++ list_splice_init(&bridge->windows, &resources);
+ err = device_add(&bridge->dev);
+ if (err) {
+ put_device(&bridge->dev);
--- /dev/null
+--- a/arch/mips/ralink/reset.c
++++ b/arch/mips/ralink/reset.c
+@@ -11,6 +11,7 @@
+ #include <linux/of.h>
+ #include <linux/delay.h>
+ #include <linux/reset-controller.h>
++#include <linux/platform_device.h>
+
+ #include <asm/reboot.h>
+
+@@ -65,21 +66,39 @@ static const struct reset_control_ops re
+ .deassert = ralink_deassert_device,
+ };
+
+-static struct reset_controller_dev reset_dev = {
+- .ops = &reset_ops,
+- .owner = THIS_MODULE,
+- .nr_resets = 32,
+- .of_reset_n_cells = 1,
++static int ralink_reset_probe(struct platform_device *pdev)
++{
++ struct reset_controller_dev *rcdev;
++
++ rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
++ if (!rcdev)
++ return -ENOMEM;
++
++ rcdev->ops = &reset_ops;
++ rcdev->owner = THIS_MODULE;
++ rcdev->nr_resets = 32;
++ rcdev->of_reset_n_cells = 1;
++ rcdev->of_node = pdev->dev.of_node;
++
++ return devm_reset_controller_register(&pdev->dev, rcdev);
++}
++
++static const struct of_device_id ralink_reset_dt_ids[] = {
++ { .compatible = "ralink,rt2880-reset" },
++ {}
++};
++
++static struct platform_driver ralink_reset_driver = {
++ .probe = ralink_reset_probe,
++ .driver = {
++ .name = "ralink-reset",
++ .of_match_table = ralink_reset_dt_ids,
++ }
+ };
+
+ void ralink_rst_init(void)
+ {
+- reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+- "ralink,rt2880-reset");
+- if (!reset_dev.of_node)
+- pr_err("Failed to find reset controller node");
+- else
+- reset_controller_register(&reset_dev);
++ platform_driver_register(&ralink_reset_driver);
+ }
+
+ static void ralink_restart(char *command)
--- /dev/null
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -162,6 +162,7 @@ source "drivers/net/ethernet/pasemi/Kcon
+ source "drivers/net/ethernet/pensando/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/qualcomm/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -73,6 +73,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
++obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
--- /dev/null
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -96,4 +96,16 @@ static inline int mt7620_get_eco(void)
+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
+ }
+
++static inline int mt7620_get_chipver(void)
++{
++ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) &
++ CHIP_REV_VER_MASK;
++}
++
++static inline int mt7620_get_pkg(void)
++{
++ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) &
++ CHIP_REV_PKG_MASK;
++}
++
+ #endif
--- /dev/null
+From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:08:11 +0200
+Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -1,12 +1,17 @@
+ # SPDX-License-Identifier: GPL-2.0
+ if RALINK
+
++config CEVT_SYSTICK_QUIRK
++ bool
++ default n
++
+ config CLKEVT_RT3352
+ bool
+ depends on SOC_RT305X || SOC_MT7620
+ default y
+ select TIMER_OF
+ select CLKSRC_MMIO
++ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+ bool
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -16,6 +16,31 @@
+ #include <asm/time.h>
+ #include <asm/cevt-r4k.h>
+
++#ifdef CONFIG_CEVT_SYSTICK_QUIRK
++static int mips_state_oneshot(struct clock_event_device *evt)
++{
++ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
++ if (!cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 1;
++ if (request_irq(evt->irq, c0_compare_interrupt, flags, "timer",
++ c0_compare_interrupt))
++ pr_err("Failed to request irq %d (timer)\n", evt->irq);
++ }
++
++ return 0;
++}
++
++static int mips_state_shutdown(struct clock_event_device *evt)
++{
++ if (cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 0;
++ free_irq(evt->irq, NULL);
++ }
++
++ return 0;
++}
++#endif
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -292,7 +317,9 @@ core_initcall(r4k_register_cpufreq_notif
+
+ int r4k_clockevent_init(void)
+ {
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
++#endif
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq, min_delta;
+@@ -322,11 +349,16 @@ int r4k_clockevent_init(void)
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of(cpu);
++#ifdef CONFIG_CEVT_SYSTICK_QUIRK
++ cd->set_state_shutdown = mips_state_shutdown;
++ cd->set_state_oneshot = mips_state_oneshot;
++#endif
+ cd->set_next_event = mips_next_event;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
+
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ if (cp0_timer_irq_installed)
+ return 0;
+
+@@ -335,6 +367,7 @@ int r4k_clockevent_init(void)
+ if (request_irq(irq, c0_compare_interrupt, flags, "timer",
+ c0_compare_interrupt))
+ pr_err("Failed to request irq %d (timer)\n", irq);
++#endif
+
+ return 0;
+ }
--- /dev/null
+From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 16:26:41 +0200
+Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
+
+This feature will break udelay() and cause the delay loop to have longer delays
+when the frequency is scaled causing a performance hit.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+--- a/arch/mips/ralink/cevt-rt3352.c
++++ b/arch/mips/ralink/cevt-rt3352.c
+@@ -29,6 +29,10 @@
+ /* enable the counter */
+ #define CFG_CNT_EN 0x1
+
++/* mt7620 frequency scaling defines */
++#define CLK_LUT_CFG 0x40
++#define SLEEP_EN BIT(31)
++
+ struct systick_device {
+ void __iomem *membase;
+ struct clock_event_device dev;
+@@ -36,21 +40,53 @@ struct systick_device {
+ int freq_scale;
+ };
+
++static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
++
+ static int systick_set_oneshot(struct clock_event_device *evt);
+ static int systick_shutdown(struct clock_event_device *evt);
+
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++ if (sdev->freq_scale == status)
++ return;
++
++ sdev->freq_scale = status;
++
++ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
++ (status) ? ("enable") : ("disable"));
++ if (status)
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++ else
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++
++static inline unsigned int read_count(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COUNT);
++}
++
++static inline unsigned int read_compare(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COMPARE);
++}
++
++static inline void write_compare(struct systick_device *sdev, unsigned int val)
++{
++ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
++}
++
+ static int systick_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+ struct systick_device *sdev;
+- u32 count;
++ int res;
+
+ sdev = container_of(evt, struct systick_device, dev);
+- count = ioread32(sdev->membase + SYSTICK_COUNT);
+- count = (count + delta) % SYSTICK_FREQ;
+- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
++ delta += read_count(sdev);
++ write_compare(sdev, delta);
++ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
+
+- return 0;
++ return res;
+ }
+
+ static void systick_event_handler(struct clock_event_device *dev)
+@@ -60,20 +96,25 @@ static void systick_event_handler(struct
+
+ static irqreturn_t systick_interrupt(int irq, void *dev_id)
+ {
+- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
++ int ret = 0;
++ struct clock_event_device *cdev;
++ struct systick_device *sdev;
+
+- dev->event_handler(dev);
++ if (read_c0_cause() & STATUSF_IP7) {
++ cdev = (struct clock_event_device *) dev_id;
++ sdev = container_of(cdev, struct systick_device, dev);
++
++ /* Clear Count/Compare Interrupt */
++ write_compare(sdev, read_compare(sdev));
++ cdev->event_handler(cdev);
++ ret = 1;
++ }
+
+- return IRQ_HANDLED;
++ return IRQ_RETVAL(ret);
+ }
+
+ static struct systick_device systick = {
+ .dev = {
+- /*
+- * cevt-r4k uses 300, make sure systick
+- * gets used if available
+- */
+- .rating = 310,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = systick_next_event,
+ .set_state_shutdown = systick_shutdown,
+@@ -91,7 +132,13 @@ static int systick_shutdown(struct clock
+ if (sdev->irq_requested)
+ free_irq(systick.dev.irq, &systick.dev);
+ sdev->irq_requested = 0;
+- iowrite32(0, systick.membase + SYSTICK_CONFIG);
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 0);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 1);
+
+ return 0;
+ }
+@@ -116,33 +163,46 @@ static int systick_set_oneshot(struct cl
+ return 0;
+ }
+
++static const struct of_device_id systick_match[] = {
++ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
++ {},
++};
++
+ static int __init ralink_systick_init(struct device_node *np)
+ {
+- int ret;
++ const struct of_device_id *match;
++ int rating = 200;
+
+ systick.membase = of_iomap(np, 0);
+ if (!systick.membase)
+ return -ENXIO;
+
+- systick.dev.name = np->name;
+- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+- systick.dev.max_delta_ticks = 0x7fff;
+- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+- systick.dev.min_delta_ticks = 0x3;
++ match = of_match_node(systick_match, np);
++ if (match) {
++ systick_freq_scaling = match->data;
++ /*
++ * cevt-r4k uses 300, make sure systick
++ * gets used if available
++ */
++ rating = 310;
++ }
++
++ /* enable counter than register clock source */
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
++ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
++
++ /* register clock event */
+ systick.dev.irq = irq_of_parse_and_map(np, 0);
+ if (!systick.dev.irq) {
+ pr_err("%pOFn: request_irq failed", np);
+ return -EINVAL;
+ }
+
+- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+- SYSTICK_FREQ, 301, 16,
+- clocksource_mmio_readl_up);
+- if (ret)
+- return ret;
+-
+- clockevents_register_device(&systick.dev);
++ systick.dev.name = np->name;
++ systick.dev.rating = rating;
++ systick.dev.cpumask = cpumask_of(0);
++ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
+
+ pr_info("%pOFn: running - mult: %d, shift: %d\n",
+ np, systick.dev.mult, systick.dev.shift);
--- /dev/null
+From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 31 Dec 2020 18:49:12 +0100
+Subject: [PATCH] MIPS: add bootargs-override property
+
+Add support for the bootargs-override property to the chosen node
+similar to the one used on ipq806x or mpc85xx.
+
+This is necessary, as the U-Boot used on some boards, notably the
+Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen
+node leading to a kernel panic when loading OpenWrt.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -544,8 +544,28 @@ static int __init bootcmdline_scan_chose
+
+ #endif /* CONFIG_OF_EARLY_FLATTREE */
+
++static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname,
++ int depth, void *data)
++{
++ bool *dt_bootargs = data;
++ const char *p;
++ int l;
++
++ if (depth != 1 || !data || strcmp(uname, "chosen") != 0)
++ return 0;
++
++ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
++ if (p != NULL && l > 0) {
++ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
++ *dt_bootargs = true;
++ }
++
++ return 1;
++}
++
+ static void __init bootcmdline_init(void)
+ {
++ bool dt_bootargs_override = false;
+ bool dt_bootargs = false;
+
+ /*
+@@ -559,6 +579,14 @@ static void __init bootcmdline_init(void
+ }
+
+ /*
++ * If bootargs-override in the chosen node is set, use this as the
++ * command line
++ */
++ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override);
++ if (dt_bootargs_override)
++ return;
++
++ /*
+ * If the user specified a built-in command line &
+ * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
+ * prepended to arguments from the bootloader or DT so we'll copy them
--- /dev/null
+From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:15:32 +0100
+Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/setup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -686,7 +686,6 @@ static void __init arch_mem_init(char **
+ mips_reserve_vmcore();
+
+ mips_parse_crashkernel();
+- device_tree_init();
+
+ /*
+ * In order to reduce the possibility of kernel panic when failed to
+@@ -803,6 +802,7 @@ void __init setup_arch(char **cmdline_p)
+
+ cpu_cache_init();
+ paging_init();
++ device_tree_init();
+
+ memblock_dump_all();
+ }
--- /dev/null
+From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:18:05 +0100
+Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
+ default
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -14,9 +14,9 @@ config CLKEVT_RT3352
+ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+- bool
++ bool "illegal access irq"
+ depends on SOC_RT305X
+- default y
++ default n
+
+ config IRQ_INTC
+ bool
--- /dev/null
+From 6decd1aad15f56b169217789630a0098b496de0e Mon Sep 17 00:00:00 2001
+From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
+Date: Wed, 7 Apr 2021 13:07:38 -0700
+Subject: [PATCH] MIPS: add support for buggy MT7621S core detection
+
+Most MT7621 SoCs have 2 cores, which is detected and supported properly
+by CPS.
+
+Unfortunately, MT7621 SoC has a less common S variant with only one core.
+On MT7621S, GCR_CONFIG still reports 2 cores, which leads to hangs when
+starting SMP. CPULAUNCH registers can be used in that case to detect the
+absence of the second core and override the GCR_CONFIG PCORES field.
+
+Rework a long-standing OpenWrt patch to override the value of
+mips_cps_numcores on single-core MT7621 systems.
+
+Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core
+MT7621 device (Netgear R6220).
+
+Original 4.14 OpenWrt patch:
+Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4cdbc90a376dd0555201c1434a2081e055e9ceb7
+Current 5.10 OpenWrt patch:
+Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch;h=c63f0f4c1ec742e24d8480e80553863744b58f6a;hb=10267e17299806f9885d086147878f6c492cb904
+
+Suggested-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+---
+ arch/mips/include/asm/mips-cps.h | 23 ++++++++++++++++++++++-
+ 1 file changed, 22 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mips-cps.h
++++ b/arch/mips/include/asm/mips-cps.h
+@@ -10,6 +10,8 @@
+ #include <linux/io.h>
+ #include <linux/types.h>
+
++#include <asm/mips-boards/launch.h>
++
+ extern unsigned long __cps_access_bad_size(void)
+ __compiletime_error("Bad size for CPS accessor");
+
+@@ -165,11 +167,30 @@ static inline uint64_t mips_cps_cluster_
+ */
+ static inline unsigned int mips_cps_numcores(unsigned int cluster)
+ {
++ unsigned int ncores;
++
+ if (!mips_cm_present())
+ return 0;
+
+ /* Add one before masking to handle 0xff indicating no cores */
+- return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
++ ncores = (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
++
++ if (IS_ENABLED(CONFIG_SOC_MT7621)) {
++ struct cpulaunch *launch;
++
++ /*
++ * Ralink MT7621S SoC is single core, but the GCR_CONFIG method
++ * always reports 2 cores. Check the second core's LAUNCH_FREADY
++ * flag to detect if the second core is missing. This method
++ * only works before the core has been started.
++ */
++ launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
++ launch += 2; /* MT7621 has 2 VPEs per core */
++ if (!(launch->flags & LAUNCH_FREADY))
++ ncores = 1;
++ }
++
++ return ncores;
+ }
+
+ /**
--- /dev/null
+--- a/arch/mips/ralink/irq-gic.c
++++ b/arch/mips/ralink/irq-gic.c
+@@ -13,6 +13,12 @@
+
+ int get_c0_perfcount_int(void)
+ {
++ /*
++ * Performance counter events are routed through GIC.
++ * Prevent them from firing on CPU IRQ7 as well
++ */
++ clear_c0_status(IE_SW0 << 7);
++
+ return gic_get_c0_perfcount_int();
+ }
+ EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
--- /dev/null
+From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 15 Jul 2013 00:39:21 +0200
+Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_RETRIES 3
+
--- /dev/null
+From 52d14545d2fc276b1bf9ccf48d4612fab6edfb6a Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 6 May 2021 17:49:55 +0200
+Subject: [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as
+
+Add MTD support for the BoHong bh25q128as SPI NOR chip.
+The chip has 16MB of total capacity, divided into a total of 256
+sectors, each 64KB sized. The chip also supports 4KB sectors.
+Additionally, it supports dual and quad read modes.
+
+Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/mtd/spi-nor/Makefile | 1 +
+ drivers/mtd/spi-nor/bohong.c | 21 +++++++++++++++++++++
+ drivers/mtd/spi-nor/core.c | 1 +
+ drivers/mtd/spi-nor/core.h | 1 +
+ 4 files changed, 24 insertions(+)
+ create mode 100644 drivers/mtd/spi-nor/bohong.c
+
+--- a/drivers/mtd/spi-nor/Makefile
++++ b/drivers/mtd/spi-nor/Makefile
+@@ -2,6 +2,7 @@
+
+ spi-nor-objs := core.o sfdp.o swp.o otp.o sysfs.o
+ spi-nor-objs += atmel.o
++spi-nor-objs += bohong.o
+ spi-nor-objs += catalyst.o
+ spi-nor-objs += eon.o
+ spi-nor-objs += esmt.o
+--- /dev/null
++++ b/drivers/mtd/spi-nor/bohong.c
+@@ -0,0 +1,21 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2005, Intec Automation Inc.
++ * Copyright (C) 2014, Freescale Semiconductor, Inc.
++ */
++
++#include <linux/mtd/spi-nor.h>
++
++#include "core.h"
++
++static const struct flash_info bohong_parts[] = {
++ /* BoHong Microelectronics */
++ { "bh25q128as", INFO(0x684018, 0, 64 * 1024, 256,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++};
++
++const struct spi_nor_manufacturer spi_nor_bohong = {
++ .name = "bohong",
++ .parts = bohong_parts,
++ .nparts = ARRAY_SIZE(bohong_parts),
++};
+--- a/drivers/mtd/spi-nor/core.c
++++ b/drivers/mtd/spi-nor/core.c
+@@ -1832,6 +1832,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
+
+ static const struct spi_nor_manufacturer *manufacturers[] = {
+ &spi_nor_atmel,
++ &spi_nor_bohong,
+ &spi_nor_catalyst,
+ &spi_nor_eon,
+ &spi_nor_esmt,
+--- a/drivers/mtd/spi-nor/core.h
++++ b/drivers/mtd/spi-nor/core.h
+@@ -473,6 +473,7 @@ struct sfdp {
+
+ /* Manufacturer drivers. */
+ extern const struct spi_nor_manufacturer spi_nor_atmel;
++extern const struct spi_nor_manufacturer spi_nor_bohong;
+ extern const struct spi_nor_manufacturer spi_nor_catalyst;
+ extern const struct spi_nor_manufacturer spi_nor_eon;
+ extern const struct spi_nor_manufacturer spi_nor_esmt;
--- /dev/null
+From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Wed, 1 Apr 2020 02:07:58 +0800
+Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand
+ flash controller
+
+This patch adds NAND flash controller driver for MediaTek MT7621 SoC.
+
+The NAND flash controller is similar with controllers described in
+mtk_nand.c, except that the controller from MT7621 doesn't support DMA
+transmission, and some registers' offset and fields are different.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ drivers/mtd/nand/raw/Kconfig | 8 +
+ drivers/mtd/nand/raw/Makefile | 1 +
+ drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++
+ 3 files changed, 1357 insertions(+)
+ create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c
+
+--- a/drivers/mtd/nand/raw/Kconfig
++++ b/drivers/mtd/nand/raw/Kconfig
+@@ -358,6 +358,14 @@ config MTD_NAND_QCOM
+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
+ controller. This controller is found on IPQ806x SoC.
+
++config MTD_NAND_MT7621
++ tristate "MT7621 NAND controller"
++ depends on SOC_MT7621 || COMPILE_TEST
++ depends on HAS_IOMEM
++ help
++ Enables support for NAND controller on MT7621 SoC.
++ This driver uses PIO mode for data transmission instead of DMA mode.
++
+ config MTD_NAND_MTK
+ tristate "MTK NAND controller"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+--- a/drivers/mtd/nand/raw/Makefile
++++ b/drivers/mtd/nand/raw/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
+ obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
+ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
++obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o
+ obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
+ obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o
+ obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
--- /dev/null
+From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Wed, 1 Apr 2020 02:07:59 +0800
+Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver
+
+This patch adds documentation for MediaTek MT7621 NAND flash controller
+driver.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++
+ 1 file changed, 68 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
+@@ -0,0 +1,68 @@
++# SPDX-License-Identifier: GPL-2.0
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding
++
++maintainers:
++ - Weijie Gao <weijie.gao@mediatek.com>
++
++description: |
++ This driver uses a single node to describe both NAND Flash controller
++ interface (NFI) and ECC engine for MT7621 SoC.
++ MT7621 supports only one chip select.
++
++properties:
++ "#address-cells": false
++ "#size-cells": false
++
++ compatible:
++ enum:
++ - mediatek,mt7621-nfc
++
++ reg:
++ items:
++ - description: Register base of NFI core
++ - description: Register base of ECC engine
++
++ reg-names:
++ items:
++ - const: nfi
++ - const: ecc
++
++ clocks:
++ items:
++ - description: Source clock for NFI core, fixed 125MHz
++
++ clock-names:
++ items:
++ - const: nfi_clk
++
++required:
++ - compatible
++ - reg
++ - reg-names
++ - clocks
++ - clock-names
++
++examples:
++ - |
++ nficlock: nficlock {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++
++ clock-frequency = <125000000>;
++ };
++
++ nand@1e003000 {
++ compatible = "mediatek,mt7621-nfc";
++
++ reg = <0x1e003000 0x800
++ 0x1e003800 0x800>;
++ reg-names = "nfi", "ecc";
++
++ clocks = <&nficlock>;
++ clock-names = "nfi_clk";
++ };
--- /dev/null
+From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Fri, 21 Jun 2019 10:04:05 +0200
+Subject: [PATCH] net: ethernet: mediatek: support net-labels
+
+With this patch, device name can be set within dts file in the same way as dsa
+port can.
+Add: label = "wan"; to GMAC node.
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -2968,6 +2968,7 @@ static const struct net_device_ops mtk_n
+
+ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
+ {
++ const char *name = of_get_property(np, "label", NULL);
+ const __be32 *_id = of_get_property(np, "reg", NULL);
+ phy_interface_t phy_mode;
+ struct phylink *phylink;
+@@ -3063,6 +3064,9 @@ static int mtk_add_mac(struct mtk_eth *e
+ else
+ eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
+
++ if (name)
++ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
++
+ return 0;
+
+ free_netdev:
--- /dev/null
+From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Fri, 13 Nov 2020 16:11:32 +0100
+Subject: [PATCH] net: phy: at803x: add support for SFP module in
+ RGMII-to-x-base mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+---
+ drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 91 insertions(+)
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -20,6 +20,8 @@
+ #include <linux/regulator/driver.h>
+ #include <linux/regulator/consumer.h>
+ #include <dt-bindings/net/qca-ar803x.h>
++#include <linux/sfp.h>
++#include <linux/phylink.h>
+
+ #define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10
+ #define AT803X_SFC_ASSERT_CRS BIT(11)
+@@ -82,9 +84,18 @@
+
+ #define AT803X_MODE_CFG_MASK 0x0F
+ #define AT803X_MODE_CFG_SGMII 0x01
++#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02
++#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03
++#define AT803X_MODE_FIBER 0x01
++#define AT803X_MODE_COPPER 0x00
+
+ #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
+ #define AT803X_PSSR_MR_AN_COMPLETE 0x0200
++#define PSSR_LINK BIT(10)
++#define PSSR_SYNC_STATUS BIT(8)
++#define PSSR_DUPLEX BIT(13)
++#define PSSR_SPEED_1000 BIT(15)
++#define PSSR_SPEED_100 BIT(14)
+
+ #define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00
+ #define QCA8327_DEBUG_MANU_CTRL_EN BIT(2)
+@@ -652,12 +663,75 @@ static int at803x_parse_dt(struct phy_de
+ return 0;
+ }
+
++static int at803x_mode(struct phy_device *phydev)
++{
++ int mode;
++
++ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK;
++
++ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 ||
++ mode == AT803X_MODE_CFG_BX1000_RGMII_75)
++ return AT803X_MODE_FIBER;
++ return AT803X_MODE_COPPER;
++}
++
++static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, };
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++ struct phy_device *phydev = upstream;
++ phy_interface_t iface;
++
++ phylink_set(at803x_support, 1000baseX_Full);
++ /* AT803x only support 1000baseX but SGMII works fine when module runs
++ * at 1Gbit.
++ */
++ phylink_set(at803x_support, 1000baseT_Full);
++
++ sfp_parse_support(phydev->sfp_bus, id, support);
++
++ // Limit to interfaces that both sides support
++ linkmode_and(support, support, at803x_support);
++
++ if (linkmode_empty(support))
++ goto unsupported_mode;
++
++ iface = sfp_select_interface(phydev->sfp_bus, support);
++
++ if (iface != PHY_INTERFACE_MODE_SGMII &&
++ iface != PHY_INTERFACE_MODE_1000BASEX)
++ goto unsupported_mode;
++
++ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
++
++ return 0;
++
++unsupported_mode:
++ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
++ "Only SGMII at 1Gbit/1000BASEX are supported!\n");
++ return -EINVAL;
++}
++
++static const struct sfp_upstream_ops at803x_sfp_ops = {
++ .attach = phy_sfp_attach,
++ .detach = phy_sfp_detach,
++ .module_insert = at803x_sfp_insert,
++};
++
++
+ static int at803x_probe(struct phy_device *phydev)
+ {
+ struct device *dev = &phydev->mdio.dev;
+ struct at803x_priv *priv;
+ int ret;
+
++
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
++ ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
++ if (ret < 0)
++ return ret;
++ }
++
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+@@ -674,6 +748,7 @@ static int at803x_probe(struct phy_devic
+ return ret;
+ }
+
++#if 0
+ /* Some bootloaders leave the fiber page selected.
+ * Switch to the copper page, as otherwise we read
+ * the PHY capabilities from the fiber side.
+@@ -685,6 +760,7 @@ static int at803x_probe(struct phy_devic
+ if (ret)
+ goto err;
+ }
++#endif
+
+ return 0;
+
+@@ -711,6 +787,7 @@ static int at803x_get_features(struct ph
+ if (err)
+ return err;
+
++#if 0
+ if (phydev->drv->phy_id != ATH8031_PHY_ID)
+ return 0;
+
+@@ -728,6 +805,7 @@ static int at803x_get_features(struct ph
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ phydev->supported);
++#endif
+ return 0;
+ }
+
+@@ -933,6 +1011,10 @@ static int at803x_read_status(struct phy
+ {
+ int ss, err, old_link = phydev->link;
+
++ /* Handle (Fiber) SGMII to RGMII mode */
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER)
++ return genphy_c37_read_status(phydev);
++
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+@@ -1033,6 +1115,12 @@ static int at803x_config_aneg(struct phy
+ {
+ int ret;
+
++ /* Handle (Fiber) SerDes to RGMII mode */
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
++ pr_warn("%s: fiber\n", __func__);
++ return genphy_c37_config_aneg(phydev);
++ }
++
+ ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
+ if (ret < 0)
+ return ret;
+@@ -1445,6 +1533,7 @@ static struct phy_driver at803x_driver[]
+ /* Qualcomm Atheros AR8031/AR8033 */
+ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
+ .name = "Qualcomm Atheros AR8031/AR8033",
++ .config_aneg = at803x_config_aneg,
+ .flags = PHY_POLL_CABLE_TEST,
+ .probe = at803x_probe,
+ .remove = at803x_remove,
--- /dev/null
+From ffbb1b37a3e1ce1a5c574a6bd4f5aede8bc468ac Mon Sep 17 00:00:00 2001
+From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
+Date: Sat, 27 Feb 2021 20:20:07 -0800
+Subject: [PATCH] Revert "net: phy: simplify phy_link_change arguments"
+
+This reverts commit a307593a644443db12888f45eed0dafb5869e2cc.
+
+This brings back the do_carrier flags used by the (hacky) next patch,
+still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c
+---
+ drivers/net/phy/phy.c | 12 ++++++------
+ drivers/net/phy/phy_device.c | 12 +++++++-----
+ drivers/net/phy/phylink.c | 3 ++-
+ include/linux/phy.h | 2 +-
+ 4 files changed, 16 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -58,13 +58,13 @@ static const char *phy_state_to_str(enum
+
+ static void phy_link_up(struct phy_device *phydev)
+ {
+- phydev->phy_link_change(phydev, true);
++ phydev->phy_link_change(phydev, true, true);
+ phy_led_trigger_change_speed(phydev);
+ }
+
+-static void phy_link_down(struct phy_device *phydev)
++static void phy_link_down(struct phy_device *phydev, bool do_carrier)
+ {
+- phydev->phy_link_change(phydev, false);
++ phydev->phy_link_change(phydev, false, do_carrier);
+ phy_led_trigger_change_speed(phydev);
+ }
+
+@@ -550,7 +550,7 @@ int phy_start_cable_test(struct phy_devi
+ goto out;
+
+ /* Mark the carrier down until the test is complete */
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+
+ netif_testing_on(dev);
+ err = phydev->drv->cable_test_start(phydev);
+@@ -621,7 +621,7 @@ int phy_start_cable_test_tdr(struct phy_
+ goto out;
+
+ /* Mark the carrier down until the test is complete */
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+
+ netif_testing_on(dev);
+ err = phydev->drv->cable_test_tdr_start(phydev, config);
+@@ -693,7 +693,7 @@ static int phy_check_link_status(struct
+ phy_link_up(phydev);
+ } else if (!phydev->link && phydev->state != PHY_NOLINK) {
+ phydev->state = PHY_NOLINK;
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+ }
+
+ return 0;
+@@ -1149,7 +1149,7 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+ }
+ do_suspend = true;
+ break;
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1000,14 +1000,16 @@ struct phy_device *phy_find_first(struct
+ }
+ EXPORT_SYMBOL(phy_find_first);
+
+-static void phy_link_change(struct phy_device *phydev, bool up)
++static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
+ {
+ struct net_device *netdev = phydev->attached_dev;
+
+- if (up)
+- netif_carrier_on(netdev);
+- else
+- netif_carrier_off(netdev);
++ if (do_carrier) {
++ if (up)
++ netif_carrier_on(netdev);
++ else
++ netif_carrier_off(netdev);
++ }
+ phydev->adjust_link(netdev);
+ if (phydev->mii_ts && phydev->mii_ts->link_state)
+ phydev->mii_ts->link_state(phydev->mii_ts, phydev);
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -946,7 +946,8 @@ void phylink_destroy(struct phylink *pl)
+ }
+ EXPORT_SYMBOL_GPL(phylink_destroy);
+
+-static void phylink_phy_change(struct phy_device *phydev, bool up)
++static void phylink_phy_change(struct phy_device *phydev, bool up,
++ bool do_carrier)
+ {
+ struct phylink *pl = phydev->phylink;
+ bool tx_pause, rx_pause;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -663,7 +663,7 @@ struct phy_device {
+ u8 mdix;
+ u8 mdix_ctrl;
+
+- void (*phy_link_change)(struct phy_device *phydev, bool up);
++ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
+ void (*adjust_link)(struct net_device *dev);
+
+ #if IS_ENABLED(CONFIG_MACSEC)
--- /dev/null
+From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 34/53] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c | 9 ++++++---
+ include/linux/phy.h | 1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -693,7 +693,10 @@ static int phy_check_link_status(struct
+ phy_link_up(phydev);
+ } else if (!phydev->link && phydev->state != PHY_NOLINK) {
+ phydev->state = PHY_NOLINK;
+- phy_link_down(phydev, true);
++ if (!phydev->no_auto_carrier_off)
++ phy_link_down(phydev, true);
++ else
++ phy_link_down(phydev, false);
+ }
+
+ return 0;
+@@ -1149,7 +1152,10 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- phy_link_down(phydev, true);
++ if (!phydev->no_auto_carrier_off)
++ phy_link_down(phydev, true);
++ else
++ phy_link_down(phydev, false);
+ }
+ do_suspend = true;
+ break;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -582,6 +582,7 @@ struct phy_device {
+ unsigned downshifted_rate:1;
+ unsigned is_on_sfp_module:1;
+ unsigned mac_managed_pm:1;
++ unsigned no_auto_carrier_off:1;
+
+ unsigned autoneg:1;
+ /* The most recently read link state */
--- /dev/null
+From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 19:45:30 +0200
+Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
+
+Describe gpio-ralink binding.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: devicetree@vger.kernel.org
+Cc: linux-gpio@vger.kernel.org
+---
+ .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -0,0 +1,40 @@
++Ralink SoC GPIO controller bindings
++
++Required properties:
++- compatible:
++ - "ralink,rt2880-gpio" for Ralink controllers
++- #gpio-cells : Should be two.
++ - first cell is the pin number
++ - second cell is used to specify optional parameters (unused)
++- gpio-controller : Marks the device node as a GPIO controller
++- reg : Physical base address and length of the controller's registers
++- interrupt-parent: phandle to the INTC device node
++- interrupts : Specify the INTC interrupt number
++- ngpios : Specify the number of GPIOs
++- ralink,register-map : The register layout depends on the GPIO bank and actual
++ SoC type. Register offsets need to be in this order.
++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
++
++Optional properties:
++- ralink,gpio-base : Specify the GPIO chips base number
++
++Example:
++
++ gpio0: gpio@600 {
++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++
++ #gpio-cells = <2>;
++ gpio-controller;
++
++ reg = <0x600 0x34>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ ngpios = <24>;
++ ralink,gpio-base = <0>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ };
--- /dev/null
+From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 20:36:29 +0200
+Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
+
+Add gpio driver for Ralink SoC. This driver makes the gpio core on
+RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: linux-gpio@vger.kernel.org
+---
+ arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
+ drivers/gpio/Kconfig | 6 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
+ 4 files changed, 386 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
+ create mode 100644 drivers/gpio/gpio-ralink.c
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
+@@ -0,0 +1,24 @@
++/*
++ * Ralink SoC GPIO API support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_RALINK_GPIO_H
++#define __ASM_MACH_RALINK_GPIO_H
++
++#define ARCH_NR_GPIOS 128
++#include <asm-generic/gpio.h>
++
++#define gpio_get_value __gpio_get_value
++#define gpio_set_value __gpio_set_value
++#define gpio_cansleep __gpio_cansleep
++#define gpio_to_irq __gpio_to_irq
++
++#endif /* __ASM_MACH_RALINK_GPIO_H */
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -569,6 +569,12 @@ config GPIO_SNPS_CREG
+ where only several fields in register belong to GPIO lines and
+ each GPIO line owns a field with different length and on/off value.
+
++config GPIO_RALINK
++ bool "Ralink GPIO Support"
++ depends on RALINK
++ help
++ Say yes here to support the Ralink SoC GPIO device
++
+ config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -121,6 +121,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
+ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
+ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
+ obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
+ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
+ obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
+@@ -0,0 +1,341 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++
++enum ralink_gpio_reg {
++ GPIO_REG_INT = 0,
++ GPIO_REG_EDGE,
++ GPIO_REG_RENA,
++ GPIO_REG_FENA,
++ GPIO_REG_DATA,
++ GPIO_REG_DIR,
++ GPIO_REG_POL,
++ GPIO_REG_SET,
++ GPIO_REG_RESET,
++ GPIO_REG_TOGGLE,
++ GPIO_REG_MAX
++};
++
++struct ralink_gpio_chip {
++ struct gpio_chip chip;
++ u8 regs[GPIO_REG_MAX];
++
++ spinlock_t lock;
++ void __iomem *membase;
++ struct irq_domain *domain;
++ int irq;
++
++ u32 rising;
++ u32 falling;
++};
++
++#define MAP_MAX 4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
++{
++ struct ralink_gpio_chip *rg;
++
++ rg = container_of(chip, struct ralink_gpio_chip, chip);
++
++ return rg;
++}
++
++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
++{
++ iowrite32(val, rg->membase + rg->regs[reg]);
++}
++
++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
++{
++ return ioread32(rg->membase + rg->regs[reg]);
++}
++
++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
++}
++
++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t &= ~BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ ralink_gpio_set(chip, offset, value);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t |= BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ if (rg->irq < 1)
++ return -1;
++
++ return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(struct irq_desc *desc)
++{
++ int i;
++
++ for (i = 0; i < irq_map_count; i++) {
++ struct irq_domain *domain = irq_map[i];
++ struct ralink_gpio_chip *rg;
++ unsigned long pending;
++ int bit;
++
++ rg = (struct ralink_gpio_chip *) domain->host_data;
++ pending = rt_gpio_r32(rg, GPIO_REG_INT);
++
++ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++ u32 map = irq_find_mapping(domain, bit);
++ generic_handle_irq(map);
++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++ }
++ }
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ struct ralink_gpio_chip *rg;
++ u32 mask = BIT(d->hwirq);
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++
++ if (type == IRQ_TYPE_PROBE) {
++ if ((rg->rising | rg->falling) & mask)
++ return 0;
++
++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
++ }
++
++ if (type & IRQ_TYPE_EDGE_RISING)
++ rg->rising |= mask;
++ else
++ rg->rising &= ~mask;
++
++ if (type & IRQ_TYPE_EDGE_FALLING)
++ rg->falling |= mask;
++ else
++ rg->falling &= ~mask;
++
++ return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++ .name = "GPIO",
++ .irq_unmask = ralink_gpio_irq_unmask,
++ .irq_mask = ralink_gpio_irq_mask,
++ .irq_mask_ack = ralink_gpio_irq_mask,
++ .irq_set_type = ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++ irq_set_handler_data(irq, d);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np,
++ struct ralink_gpio_chip *rg)
++{
++ if (irq_map_count >= MAP_MAX)
++ return;
++
++ rg->irq = irq_of_parse_and_map(np, 0);
++ if (!rg->irq)
++ return;
++
++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
++ &irq_domain_ops, rg);
++ if (!rg->domain) {
++ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
++ return;
++ }
++
++ irq_map[irq_map_count++] = rg->domain;
++
++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++ if (!atomic_read(&irq_refcount))
++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++ atomic_inc(&irq_refcount);
++
++ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
++static int ralink_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct ralink_gpio_chip *rg;
++ const __be32 *ngpio, *gpiobase;
++
++ if (!res) {
++ dev_err(&pdev->dev, "failed to find resource\n");
++ return -ENOMEM;
++ }
++
++ rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++ if (!rg)
++ return -ENOMEM;
++
++ rg->membase = devm_ioremap_resource(&pdev->dev, res);
++ if (!rg->membase) {
++ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
++ return -ENOMEM;
++ }
++
++ if (of_property_read_u8_array(np, "ralink,register-map",
++ rg->regs, GPIO_REG_MAX)) {
++ dev_err(&pdev->dev, "failed to read register definition\n");
++ return -EINVAL;
++ }
++
++ ngpio = of_get_property(np, "ngpios", NULL);
++ if (!ngpio) {
++ dev_err(&pdev->dev, "failed to read number of pins\n");
++ return -EINVAL;
++ }
++
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (gpiobase)
++ rg->chip.base = be32_to_cpu(*gpiobase);
++ else
++ rg->chip.base = -1;
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.parent = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = np;
++ rg->chip.ngpio = be32_to_cpu(*ngpio);
++ rg->chip.direction_input = ralink_gpio_direction_input;
++ rg->chip.direction_output = ralink_gpio_direction_output;
++ rg->chip.get = ralink_gpio_get;
++ rg->chip.set = ralink_gpio_set;
++ rg->chip.request = gpiochip_generic_request;
++ rg->chip.to_irq = ralink_gpio_to_irq;
++ rg->chip.free = gpiochip_generic_free;
++
++ /* set polarity to low for all lines */
++ rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ ralink_gpio_irq_init(np, rg);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static const struct of_device_id ralink_gpio_match[] = {
++ { .compatible = "ralink,rt2880-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_gpio_match);
++
++static struct platform_driver ralink_gpio_driver = {
++ .probe = ralink_gpio_probe,
++ .driver = {
++ .name = "rt2880_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_gpio_match,
++ },
++};
++
++static int __init ralink_gpio_init(void)
++{
++ return platform_driver_register(&ralink_gpio_driver);
++}
++
++subsys_initcall(ralink_gpio_init);
--- /dev/null
+From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001
+From: Daniel Santos <daniel.santos@pobox.com>
+Date: Sun, 4 Nov 2018 20:24:32 -0600
+Subject: gpio-ralink: Add support for GPIO as interrupt-controller
+
+Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
+---
+ Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++
+ drivers/gpio/gpio-ralink.c | 2 +-
+ 2 files changed, 7 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -17,6 +17,9 @@ Required properties:
+
+ Optional properties:
+ - ralink,gpio-base : Specify the GPIO chips base number
++- interrupt-controller : marks this as an interrupt controller
++- #interrupt-cells : a standard two-cell interrupt flag, see
++ interrupt-controller/interrupts.txt
+
+ Example:
+
+@@ -28,6 +31,9 @@ Example:
+
+ reg = <0x600 0x34>;
+
++ interrupt-controller;
++ #interrupt-cells = <2>;
++
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+--- a/drivers/gpio/gpio-ralink.c
++++ b/drivers/gpio/gpio-ralink.c
+@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d
+ }
+
+ static const struct irq_domain_ops irq_domain_ops = {
+- .xlate = irq_domain_xlate_onecell,
++ .xlate = irq_domain_xlate_twocell,
+ .map = gpio_map,
+ };
+
--- /dev/null
+From: AngeloGioacchino Del Regno
+ <angelogioacchino.delregno@somainline.org>
+To: linus.walleij@linaro.org
+Cc: linux-kernel@vger.kernel.org, konrad.dybcio@somainline.org,
+ marijn.suijten@somainline.org, martin.botka@somainline.org,
+ phone-devel@vger.kernel.org, linux-gpio@vger.kernel.org,
+ devicetree@vger.kernel.org, robh+dt@kernel.org,
+ AngeloGioacchino Del Regno
+ <angelogioacchino.delregno@somainline.org>
+Subject: [PATCH v5 1/2] pinctrl: Add driver for Awinic AW9523/B I2C GPIO
+ Expander
+Date: Mon, 25 Jan 2021 19:22:18 +0100
+
+The Awinic AW9523(B) is a multi-function I2C gpio expander in a
+TQFN-24L package, featuring PWM (max 37mA per pin, or total max
+power 3.2Watts) for LED driving capability.
+
+It has two ports with 8 pins per port (for a total of 16 pins),
+configurable as either PWM with 1/256 stepping or GPIO input/output,
+1.8V logic input; each GPIO can be configured as input or output
+independently from each other.
+
+This IC also has an internal interrupt controller, which is capable
+of generating an interrupt for each GPIO, depending on the
+configuration, and will raise an interrupt on the INTN pin to
+advertise this to an external interrupt controller.
+
+Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+---
+ drivers/pinctrl/Kconfig | 17 +
+ drivers/pinctrl/Makefile | 1 +
+ drivers/pinctrl/pinctrl-aw9523.c | 1122 ++++++++++++++++++++++++++++++
+ 3 files changed, 1140 insertions(+)
+ create mode 100644 drivers/pinctrl/pinctrl-aw9523.c
+
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -111,6 +111,24 @@ config PINCTRL_AMD
+ Requires ACPI/FDT device enumeration code to set up a platform
+ device.
+
++config PINCTRL_AW9523
++ bool "Awinic AW9523/AW9523B I2C GPIO expander pinctrl driver"
++ depends on OF && I2C
++ select PINMUX
++ select PINCONF
++ select GENERIC_PINCONF
++ select GPIOLIB
++ select GPIOLIB_IRQCHIP
++ select REGMAP
++ select REGMAP_I2C
++ help
++ The Awinic AW9523/AW9523B is a multi-function I2C GPIO
++ expander with PWM functionality. This driver bundles a
++ pinctrl driver to select the function muxing and a GPIO
++ driver to handle GPIO, when the GPIO function is selected.
++
++ Say yes to enable pinctrl and GPIO support for the AW9523(B).
++
+ config PINCTRL_BM1880
+ bool "Bitmain BM1880 Pinctrl driver"
+ depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-
+ obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
+ obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
+ obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
++obj-$(CONFIG_PINCTRL_AW9523) += pinctrl-aw9523.o
+ obj-$(CONFIG_PINCTRL_BM1880) += pinctrl-bm1880.o
+ obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
+ obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o
--- /dev/null
+From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 19 Sep 2013 01:50:59 +0200
+Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/media/usb/uvc/uvc_driver.c | 12 +++
+ drivers/media/usb/uvc/uvc_status.c | 2 +
+ drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
+ drivers/media/usb/uvc/uvcvideo.h | 5 +-
+ 4 files changed, 165 insertions(+), 1 deletion(-)
+
+--- a/drivers/media/usb/uvc/uvc_driver.c
++++ b/drivers/media/usb/uvc/uvc_driver.c
+@@ -3164,6 +3164,18 @@ static const struct usb_device_id uvc_id
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
++ /* iPassion iP2970 */
++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
++ | USB_DEVICE_ID_MATCH_INT_INFO,
++ .idVendor = 0x1B3B,
++ .idProduct = 0x2970,
++ .bInterfaceClass = USB_CLASS_VIDEO,
++ .bInterfaceSubClass = 1,
++ .bInterfaceProtocol = 0,
++ .driver_info = UVC_QUIRK_PROBE_MINMAX
++ | UVC_QUIRK_STREAM_NO_FID
++ | UVC_QUIRK_MOTION
++ | UVC_QUIRK_SINGLE_ISO },
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
+--- a/drivers/media/usb/uvc/uvc_status.c
++++ b/drivers/media/usb/uvc/uvc_status.c
+@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u
+ if (uvc_event_control(urb, status, len))
+ /* The URB will be resubmitted in work context. */
+ return;
++ dev->motion = 1;
+ break;
+ }
+
+@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d
+ }
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
++ dev->motion = 0;
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+--- a/drivers/media/usb/uvc/uvc_video.c
++++ b/drivers/media/usb/uvc/uvc_video.c
+@@ -19,6 +19,11 @@
+ #include <linux/wait.h>
+ #include <linux/atomic.h>
+ #include <asm/unaligned.h>
++#include <linux/skbuff.h>
++#include <linux/kobject.h>
++#include <linux/netlink.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
+
+ #include <media/v4l2-common.h>
+
+@@ -1214,9 +1219,149 @@ static void uvc_video_decode_data(struct
+ uvc_urb->async_operations++;
+ }
+
++struct bh_priv {
++ unsigned long seen;
++};
++
++struct bh_event {
++ const char *name;
++ struct sk_buff *skb;
++ struct work_struct work;
++};
++
++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
++#define BH_DBG(fmt, args...) do {} while (0)
++#define BH_SKB_SIZE 2048
++
++extern u64 uevent_next_seqnum(void);
++static int seen = 0;
++
++static int bh_event_add_var(struct bh_event *event, int argv,
++ const char *format, ...)
++{
++ static char buf[128];
++ char *s;
++ va_list args;
++ int len;
++
++ if (argv)
++ return 0;
++
++ va_start(args, format);
++ len = vsnprintf(buf, sizeof(buf), format, args);
++ va_end(args);
++
++ if (len >= sizeof(buf)) {
++ BH_ERR("buffer size too small\n");
++ WARN_ON(1);
++ return -ENOMEM;
++ }
++
++ s = skb_put(event->skb, len + 1);
++ strcpy(s, buf);
++
++ BH_DBG("added variable '%s'\n", s);
++
++ return 0;
++}
++
++static int motion_hotplug_fill_event(struct bh_event *event)
++{
++ int s = jiffies;
++ int ret;
++
++ if (!seen)
++ seen = jiffies;
++
++ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "PATH=%s",
++ "/sbin:/bin:/usr/sbin:/usr/bin");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "ACTION=motion");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
++ if (ret)
++ return ret;
++ seen = s;
++
++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
++
++ return ret;
++}
++
++static void motion_hotplug_work(struct work_struct *work)
++{
++ struct bh_event *event = container_of(work, struct bh_event, work);
++ int ret = 0;
++
++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
++ if (!event->skb)
++ goto out_free_event;
++
++ ret = bh_event_add_var(event, 0, "%s@", "add");
++ if (ret)
++ goto out_free_skb;
++
++ ret = motion_hotplug_fill_event(event);
++ if (ret)
++ goto out_free_skb;
++
++ NETLINK_CB(event->skb).dst_group = 1;
++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
++
++out_free_skb:
++ if (ret) {
++ BH_ERR("work error %d\n", ret);
++ kfree_skb(event->skb);
++ }
++out_free_event:
++ kfree(event);
++}
++
++static int motion_hotplug_create_event(void)
++{
++ struct bh_event *event;
++
++ event = kzalloc(sizeof(*event), GFP_KERNEL);
++ if (!event)
++ return -ENOMEM;
++
++ event->name = "motion";
++
++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
++ schedule_work(&event->work);
++
++ return 0;
++}
++
++#define MOTION_FLAG_OFFSET 4
+ static void uvc_video_decode_end(struct uvc_streaming *stream,
+ struct uvc_buffer *buf, const u8 *data, int len)
+ {
++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
++ u8 *mem;
++ buf->state = UVC_BUF_STATE_READY;
++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
++ if ( stream->dev->motion ) {
++ stream->dev->motion = 0;
++ motion_hotplug_create_event();
++ } else {
++ *mem &= 0x7f;
++ }
++ }
++
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
+ uvc_dbg(stream->dev, FRAME, "Frame complete (EOF found)\n");
+@@ -1799,6 +1944,8 @@ static int uvc_init_video_isoc(struct uv
+ if (npackets == 0)
+ return -ENOMEM;
+
++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
++ npackets = 1;
+ size = npackets * psize;
+
+ for_each_uvc_urb(uvc_urb, stream) {
+--- a/drivers/media/usb/uvc/uvcvideo.h
++++ b/drivers/media/usb/uvc/uvcvideo.h
+@@ -209,7 +209,9 @@
+ #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
+ #define UVC_QUIRK_FORCE_Y8 0x00000800
+ #define UVC_QUIRK_FORCE_BPP 0x00001000
+-
++#define UVC_QUIRK_MOTION 0x00001000
++#define UVC_QUIRK_SINGLE_ISO 0x00002000
++
+ /* Format flags */
+ #define UVC_FMT_FLAG_COMPRESSED 0x00000001
+ #define UVC_FMT_FLAG_STREAM 0x00000002
+@@ -700,6 +702,7 @@ struct uvc_device {
+ u8 *status;
+ struct input_dev *input;
+ char input_phys[64];
++ int motion;
+
+ struct uvc_ctrl_work {
+ struct work_struct work;
--- /dev/null
+From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:12:59 +0200
+Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
+
+Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+@@ -0,0 +1,28 @@
++Ralink SoC RT2880 SPI master controller.
++
++This SPI controller is found on most wireless SoCs made by ralink.
++
++Required properties:
++- compatible : "ralink,rt2880-spi"
++- reg : The register base for the controller.
++- #address-cells : <1>, as required by generic SPI binding.
++- #size-cells : <0>, also as required by generic SPI binding.
++
++Child nodes as per the generic SPI binding.
++
++Example:
++
++ spi@b00 {
++ compatible = "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ m25p80@0 {
++ compatible = "m25p80";
++ reg = <0>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++
--- /dev/null
+From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 537 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -719,6 +719,12 @@ config SPI_QCOM_GENI
+ This driver can also be built as a module. If so, the module
+ will be called spi-geni-qcom.
+
++config SPI_RT2880
++ tristate "Ralink RT288x SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -100,6 +100,7 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
+ obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,530 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi@marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "spi-rt2880"
++
++#define RAMIPS_SPI_STAT 0x00
++#define RAMIPS_SPI_CFG 0x10
++#define RAMIPS_SPI_CTL 0x14
++#define RAMIPS_SPI_DATA 0x20
++#define RAMIPS_SPI_ADDR 0x24
++#define RAMIPS_SPI_BS 0x28
++#define RAMIPS_SPI_USER 0x2C
++#define RAMIPS_SPI_TXFIFO 0x30
++#define RAMIPS_SPI_RXFIFO 0x34
++#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_MODE 0x3C
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++#define RAMIPS_SPI_DMA 0x80
++#define RAMIPS_SPI_DMASTAT 0x84
++#define RAMIPS_SPI_ARBITER 0xF0
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_ADDRMODE BIT(12)
++#define SPICFG_RXENVDIS BIT(11)
++#define SPICFG_RXCAP BIT(10)
++#define SPICFG_SPIENMODE BIT(9)
++#define SPICFG_MSBFIRST BIT(8)
++#define SPICFG_SPICLKPOL BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING BIT(4)
++#define SPICFG_HIZSPI BIT(3)
++#define SPICFG_SPICLK_PRESCALE_MASK 0x7
++#define SPICFG_SPICLK_DIV2 0
++#define SPICFG_SPICLK_DIV4 1
++#define SPICFG_SPICLK_DIV8 2
++#define SPICFG_SPICLK_DIV16 3
++#define SPICFG_SPICLK_DIV32 4
++#define SPICFG_SPICLK_DIV64 5
++#define SPICFG_SPICLK_DIV128 6
++#define SPICFG_SPICLK_DISABLE 7
++
++/* SPICTL register bit field */
++#define SPICTL_START BIT(4)
++#define SPICTL_HIZSDO BIT(3)
++#define SPICTL_STARTWR BIT(2)
++#define SPICTL_STARTRD BIT(1)
++#define SPICTL_SPIENA BIT(0)
++
++/* SPIUSER register bit field */
++#define SPIUSER_USERMODE BIT(21)
++#define SPIUSER_INSTR_PHASE BIT(20)
++#define SPIUSER_ADDR_PHASE_MASK 0x7
++#define SPIUSER_ADDR_PHASE_OFFSET 17
++#define SPIUSER_MODE_PHASE BIT(16)
++#define SPIUSER_DUMMY_PHASE_MASK 0x3
++#define SPIUSER_DUMMY_PHASE_OFFSET 14
++#define SPIUSER_DATA_PHASE_MASK 0x3
++#define SPIUSER_DATA_PHASE_OFFSET 12
++#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_ADDR_TYPE_OFFSET 9
++#define SPIUSER_MODE_TYPE_OFFSET 6
++#define SPIUSER_DUMMY_TYPE_OFFSET 3
++#define SPIUSER_DATA_TYPE_OFFSET 0
++#define SPIUSER_TRANSFER_MASK 0x7
++#define SPIUSER_TRANSFER_SINGLE BIT(0)
++#define SPIUSER_TRANSFER_DUAL BIT(1)
++#define SPIUSER_TRANSFER_QUAD BIT(2)
++
++#define SPIUSER_TRANSFER_TYPE(type) ( \
++ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
++ (type << SPIUSER_MODE_TYPE_OFFSET) | \
++ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
++ (type << SPIUSER_DATA_TYPE_OFFSET) \
++)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXEMPTY BIT(19)
++#define SPIFIFOSTAT_RXEMPTY BIT(18)
++#define SPIFIFOSTAT_TXFULL BIT(17)
++#define SPIFIFOSTAT_RXFULL BIT(16)
++#define SPIFIFOSTAT_FIFO_MASK 0xff
++#define SPIFIFOSTAT_TX_OFFSET 8
++#define SPIFIFOSTAT_RX_OFFSET 0
++
++#define SPI_FIFO_DEPTH 16
++
++/* SPIMODE register bit field */
++#define SPIMODE_MODE_OFFSET 24
++#define SPIMODE_DUMMY_OFFSET 0
++
++/* SPIARB register bit field */
++#define SPICTL_ARB_EN BIT(31)
++#define SPICTL_CSCTL1 BIT(16)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
++ SPI_CS_HIGH)
++
++static atomic_t hw_reset_count = ATOMIC_INIT(0);
++
++struct rt2880_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ u32 speed;
++ u16 wait_loops;
++ u16 mode;
++ struct clk *clk;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
++ const u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) | mask), addr);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) & ~mask), addr);
++}
++
++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ u32 rate;
++ u32 prescale;
++
++ /*
++ * the supported rates are: 2, 4, 8, ... 128
++ * round up as we look for equal or less speed
++ */
++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
++ rate = roundup_pow_of_two(rate);
++
++ /* Convert the rate to SPI clock divisor value. */
++ prescale = ilog2(rate / 2);
++
++ /* some tolerance. double and add 100 */
++ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
++ (clk_get_rate(rs->clk) / rate);
++ rs->wait_loops = (rs->wait_loops << 1) + 100;
++ rs->speed = speed;
++
++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
++ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
++ rs->wait_loops);
++
++ return prescale;
++}
++
++static u32 get_arbiter_offset(struct spi_master *master)
++{
++ u32 offset;
++
++ offset = RAMIPS_SPI_ARBITER;
++ if (master->bus_num == 1)
++ offset -= RAMIPS_SPI_DEV_OFFSET;
++
++ return offset;
++}
++
++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++ if (enable)
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ else
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
++{
++ int loop = rs->wait_loops * len;
++
++ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
++ cpu_relax();
++
++ if (loop)
++ return 0;
++
++ return -ETIMEDOUT;
++}
++
++static void rt2880_dump_reg(struct spi_master *master)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++
++ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
++ "data: %08x, arb: %08x\n",
++ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
++ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
++ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
++ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
++ rt2880_spi_read(rs, get_arbiter_offset(master)));
++}
++
++static int rt2880_spi_transfer_one(struct spi_master *master,
++ struct spi_device *spi, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ unsigned len;
++ const u8 *tx = xfer->tx_buf;
++ u8 *rx = xfer->rx_buf;
++ int err = 0;
++
++ /* change clock speed */
++ if (unlikely(rs->speed != xfer->speed_hz)) {
++ u32 reg;
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
++ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ }
++
++ if (tx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "TX failed, err=%d\n", err);
++ goto out;
++ }
++ }
++ }
++
++ if (rx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "RX failed, err=%d\n", err);
++ goto out;
++ }
++ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ }
++ }
++
++out:
++ return err;
++}
++
++/* copy from spi.c */
++static void spi_set_cs(struct spi_device *spi, bool enable)
++{
++ if (spi->mode & SPI_CS_HIGH)
++ enable = !enable;
++
++ if (spi->cs_gpio >= 0)
++ gpio_set_value(spi->cs_gpio, !enable);
++ else if (spi->master->set_cs)
++ spi->master->set_cs(spi, !enable);
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++ struct spi_master *master = spi->master;
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ u32 reg, old_reg, arbit_off;
++
++ if ((spi->max_speed_hz > master->max_speed_hz) ||
++ (spi->max_speed_hz < master->min_speed_hz)) {
++ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ if (!(master->bits_per_word_mask &
++ BIT(spi->bits_per_word - 1))) {
++ dev_err(&spi->dev, "invalide bits_per_word %d\n",
++ spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ /* the hardware seems can't work on mode0 force it to mode3 */
++ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
++ dev_warn(&spi->dev, "force spi mode3\n");
++ spi->mode |= SPI_MODE_3;
++ }
++
++ /* chip polarity */
++ arbit_off = get_arbiter_offset(master);
++ reg = old_reg = rt2880_spi_read(rs, arbit_off);
++ if (spi->mode & SPI_CS_HIGH) {
++ switch (master->bus_num) {
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ default:
++ reg |= SPI0_POR;
++ break;
++ }
++ } else {
++ switch (master->bus_num) {
++ case 1:
++ reg &= ~SPI1_POR;
++ break;
++ default:
++ reg &= ~SPI0_POR;
++ break;
++ }
++ }
++
++ /* enable spi1 */
++ if (master->bus_num == 1)
++ reg |= SPICTL_ARB_EN;
++
++ if (reg != old_reg)
++ rt2880_spi_write(rs, arbit_off, reg);
++
++ /* deselected the spi device */
++ spi_set_cs(spi, false);
++
++ rt2880_dump_reg(master);
++
++ return 0;
++}
++
++static int rt2880_spi_prepare_message(struct spi_master *master,
++ struct spi_message *msg)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = msg->spi;
++ u32 reg;
++
++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
++ return 0;
++
++#if 0
++ /* set spido to tri-state */
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
++#endif
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++
++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
++ SPICFG_RXCLKEDGE_FALLING |
++ SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_PRESCALE_MASK);
++
++ /* MSB */
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ /* spi mode */
++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++ rs->mode = spi->mode;
++
++#if 0
++ /* set spiclk and spiena to tri-state */
++ reg |= SPICFG_HIZSPI;
++#endif
++
++ /* clock divide */
++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++
++ return 0;
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++ void __iomem *base;
++ struct resource *r;
++ struct clk *clk;
++ int ret;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock\n");
++ return PTR_ERR(clk);
++ }
++
++ ret = clk_prepare_enable(clk);
++ if (ret)
++ goto err_clk;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_dbg(&pdev->dev, "master allocation failed\n");
++ ret = -ENOMEM;
++ goto err_clk;
++ }
++
++ master->dev.of_node = pdev->dev.of_node;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->min_speed_hz = clk_get_rate(clk) / 128;
++ master->max_speed_hz = clk_get_rate(clk) / 2;
++ master->flags = SPI_MASTER_HALF_DUPLEX;
++ master->setup = rt2880_spi_setup;
++ master->prepare_message = rt2880_spi_prepare_message;
++ master->set_cs = rt2880_spi_set_cs;
++ master->transfer_one = rt2880_spi_transfer_one,
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->master = master;
++ rs->base = base;
++ rs->clk = clk;
++
++ if (atomic_inc_return(&hw_reset_count) == 1)
++ device_reset(&pdev->dev);
++
++ ret = devm_spi_register_master(&pdev->dev, master);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
++ goto err_master;
++ }
++
++ return ret;
++
++err_master:
++ spi_master_put(master);
++ kfree(master);
++err_clk:
++ clk_disable_unprepare(clk);
++
++ return ret;
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable_unprepare(rs->clk);
++ atomic_dec(&hw_reset_count);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_spi_match,
++ },
++ .probe = rt2880_spi_probe,
++ .remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");
--- /dev/null
+From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:52:56 +0100
+Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
+ 4 files changed, 359 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++ region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus@10000000 {
++ i2c@900 {
++ compatible = "link,rt3052-i2c";
++ reg = <0x900 0x100>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hwmon@4b {
++ compatible = "national,lm92";
++ reg = <0x4b>;
++ };
++ };
++};
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -949,6 +949,11 @@ config I2C_RK3X
+ This driver can also be built as a module. If so, the module will
+ be called i2c-rk3x.
+
++config I2C_RALINK
++ tristate "Ralink I2C Controller"
++ depends on RALINK && !SOC_MT7621
++ select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ bool
+ help
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc
+ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
+ obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o
+ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o
+ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,435 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
++ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
++ *
++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
++ * (C) 2014 Sittisak <sittisaks@hotmail.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#define REG_CONFIG_REG 0x00
++#define REG_CLKDIV_REG 0x04
++#define REG_DEVADDR_REG 0x08
++#define REG_ADDR_REG 0x0C
++#define REG_DATAOUT_REG 0x10
++#define REG_DATAIN_REG 0x14
++#define REG_STATUS_REG 0x18
++#define REG_STARTXFR_REG 0x1C
++#define REG_BYTECNT_REG 0x20
++
++/* REG_CONFIG_REG */
++#define I2C_ADDRLEN_OFFSET 5
++#define I2C_DEVADLEN_OFFSET 2
++#define I2C_ADDRLEN_MASK 0x3
++#define I2C_ADDR_DIS BIT(1)
++#define I2C_DEVADDR_DIS BIT(0)
++#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET)
++#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET)
++#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
++
++/* REG_CLKDIV_REG */
++#define I2C_CLKDIV_MASK 0xffff
++
++/* REG_DEVADDR_REG */
++#define I2C_DEVADDR_MASK 0x7f
++
++/* REG_ADDR_REG */
++#define I2C_ADDR_MASK 0xff
++
++/* REG_STATUS_REG */
++#define I2C_STARTERR BIT(4)
++#define I2C_ACKERR BIT(3)
++#define I2C_DATARDY BIT(2)
++#define I2C_SDOEMPTY BIT(1)
++#define I2C_BUSY BIT(0)
++
++/* REG_STARTXFR_REG */
++#define NOSTOP_CMD BIT(2)
++#define NODATA_CMD BIT(1)
++#define READ_CMD BIT(0)
++
++/* REG_BYTECNT_REG */
++#define BYTECNT_MAX 64
++#define SET_BYTECNT(x) (x - 1)
++
++/* timeout waiting for I2C devices to respond (clock streching) */
++#define TIMEOUT_MS 1000
++#define DELAY_INTERVAL_US 100
++
++struct rt_i2c {
++ void __iomem *base;
++ struct clk *clk;
++ struct device *dev;
++ struct i2c_adapter adap;
++ u32 cur_clk;
++ u32 clk_div;
++ u32 flags;
++};
++
++static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
++{
++ iowrite32(val, i2c->base + reg);
++}
++
++static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
++{
++ return ioread32(i2c->base + reg);
++}
++
++static int poll_down_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++
++ do {
++ if (!(readl_relaxed(addr) & mask))
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
++}
++
++static int rt_i2c_wait_idle(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
++
++ return ret;
++}
++
++static int poll_up_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++ u32 status;
++
++ do {
++ status = readl_relaxed(addr);
++
++ /* check error status */
++ if (status & I2C_STARTERR)
++ return -EAGAIN;
++ else if (status & I2C_ACKERR)
++ return -ENXIO;
++ else if (status & mask)
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return -ETIMEDOUT;
++}
++
++static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
++
++ return ret;
++}
++
++static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
++
++ return ret;
++}
++
++static void rt_i2c_reset(struct rt_i2c *i2c)
++{
++ device_reset(i2c->adap.dev.parent);
++ barrier();
++ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
++}
++
++static void rt_i2c_dump_reg(struct rt_i2c *i2c)
++{
++ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
++ "addr %08x, dataout %08x, datain %08x, " \
++ "status %08x, startxfr %08x, bytecnt %08x\n",
++ rt_i2c_r32(i2c, REG_CONFIG_REG),
++ rt_i2c_r32(i2c, REG_CLKDIV_REG),
++ rt_i2c_r32(i2c, REG_DEVADDR_REG),
++ rt_i2c_r32(i2c, REG_ADDR_REG),
++ rt_i2c_r32(i2c, REG_DATAOUT_REG),
++ rt_i2c_r32(i2c, REG_DATAIN_REG),
++ rt_i2c_r32(i2c, REG_STATUS_REG),
++ rt_i2c_r32(i2c, REG_STARTXFR_REG),
++ rt_i2c_r32(i2c, REG_BYTECNT_REG));
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
++ int num)
++{
++ struct rt_i2c *i2c;
++ struct i2c_msg *pmsg;
++ unsigned char addr;
++ int i, j, ret;
++ u32 cmd;
++
++ i2c = i2c_get_adapdata(adap);
++
++ for (i = 0; i < num; i++) {
++ pmsg = &msgs[i];
++ if (i == (num - 1))
++ cmd = 0;
++ else
++ cmd = NOSTOP_CMD;
++
++ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
++ pmsg->addr, pmsg->len, pmsg->flags,
++ (cmd == 0)? 1 : 0);
++
++ /* wait hardware idle */
++ if ((ret = rt_i2c_wait_idle(i2c)))
++ goto err_timeout;
++
++ if (pmsg->flags & I2C_M_TEN) {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
++ /* 10 bits address */
++ addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
++ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
++ REG_ADDR_REG);
++ } else {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
++ REG_CONFIG_REG);
++ /* 7 bits address */
++ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ }
++
++ /* buffer length */
++ if (pmsg->len == 0)
++ cmd |= NODATA_CMD;
++ else
++ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
++ REG_BYTECNT_REG);
++
++ j = 0;
++ if (pmsg->flags & I2C_M_RD) {
++ cmd |= READ_CMD;
++ /* start transfer */
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ do {
++ /* wait */
++ if ((ret = rt_i2c_wait_rx_done(i2c)))
++ goto err_timeout;
++ /* read data */
++ if (pmsg->len)
++ pmsg->buf[j] = rt_i2c_r32(i2c,
++ REG_DATAIN_REG);
++ j++;
++ } while (j < pmsg->len);
++ } else {
++ do {
++ /* write data */
++ if (pmsg->len)
++ rt_i2c_w32(i2c, pmsg->buf[j],
++ REG_DATAOUT_REG);
++ /* start transfer */
++ if (j == 0) {
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ }
++ /* wait */
++ if ((ret = rt_i2c_wait_tx_done(i2c)))
++ goto err_timeout;
++ j++;
++ } while (j < pmsg->len);
++ }
++ }
++ /* the return value is number of executed messages */
++ ret = i;
++
++ return ret;
++
++err_timeout:
++ rt_i2c_dump_reg(i2c);
++ rt_i2c_reset(i2c);
++ return ret;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++ .master_xfer = rt_i2c_master_xfer,
++ .functionality = rt_i2c_func,
++};
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++ { .compatible = "ralink,rt2880-i2c" },
++ { /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct i2c_adapter_quirks rt_i2c_quirks = {
++ .max_write_len = BYTECNT_MAX,
++ .max_read_len = BYTECNT_MAX,
++};
++
++static int rt_i2c_init(struct rt_i2c *i2c)
++{
++ u32 reg;
++
++ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
++ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
++ (2 * i2c->cur_clk);
++ if (i2c->clk_div < 8)
++ i2c->clk_div = 8;
++ if (i2c->clk_div > I2C_CLKDIV_MASK)
++ i2c->clk_div = I2C_CLKDIV_MASK;
++
++ /* check support combinde/repeated start message */
++ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
++ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
++
++ rt_i2c_reset(i2c);
++
++ return reg;
++}
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct rt_i2c *i2c;
++ struct i2c_adapter *adap;
++ const struct of_device_id *match;
++ int ret, restart;
++
++ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENODEV;
++ }
++
++ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
++ if (!i2c) {
++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++ return -ENOMEM;
++ }
++
++ i2c->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2c->base))
++ return PTR_ERR(i2c->base);
++
++ i2c->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2c->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return -ENODEV;
++ }
++ clk_prepare_enable(i2c->clk);
++ i2c->dev = &pdev->dev;
++
++ if (of_property_read_u32(pdev->dev.of_node,
++ "clock-frequency", &i2c->cur_clk))
++ i2c->cur_clk = 100000;
++
++ adap = &i2c->adap;
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ adap->algo = &rt_i2c_algo;
++ adap->retries = 3;
++ adap->dev.parent = &pdev->dev;
++ i2c_set_adapdata(adap, i2c);
++ adap->dev.of_node = pdev->dev.of_node;
++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++ adap->quirks = &rt_i2c_quirks;
++
++ platform_set_drvdata(pdev, i2c);
++
++ restart = rt_i2c_init(i2c);
++
++ ret = i2c_add_adapter(adap);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "failed to add adapter\n");
++ clk_disable_unprepare(i2c->clk);
++ return ret;
++ }
++
++ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
++ i2c->cur_clk/1000, restart ? "" : "not ");
++
++ return ret;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++ struct rt_i2c *i2c = platform_get_drvdata(pdev);
++
++ i2c_del_adapter(&i2c->adap);
++ clk_disable_unprepare(i2c->clk);
++
++ return 0;
++}
++
++static struct platform_driver rt_i2c_driver = {
++ .probe = rt_i2c_probe,
++ .remove = rt_i2c_remove,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "i2c-ralink",
++ .of_match_table = i2c_rt_dt_ids,
++ },
++};
++
++static int __init i2c_rt_init (void)
++{
++ return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++ platform_driver_unregister(&rt_i2c_driver);
++}
++module_exit(i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
--- /dev/null
+From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 13 Nov 2014 19:08:40 +0100
+Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mmc/host/Kconfig | 2 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/mtk-mmc/Kconfig | 16 +
+ drivers/mmc/host/mtk-mmc/Makefile | 42 +
+ drivers/mmc/host/mtk-mmc/board.h | 137 ++
+ drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
+ drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
+ drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
+ drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
+ 9 files changed, 4762 insertions(+)
+ create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
+ create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
+ create mode 100644 drivers/mmc/host/mtk-mmc/board.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
+
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -1091,3 +1091,5 @@ config MMC_OWL
+
+ config MMC_SDHCI_EXTERNAL_DMA
+ bool
++
++source "drivers/mmc/host/mtk-mmc/Kconfig"
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -3,6 +3,7 @@
+ # Makefile for MMC/SD host controller drivers
+ #
+
++obj-$(CONFIG_MTK_MMC) += mtk-mmc/
+ obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
+ armmmci-y := mmci.o
+ armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
--- /dev/null
+From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:31:47 +0100
+Subject: [PATCH 48/53] asoc: add mt7620 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 +
+ sound/soc/Kconfig | 1 +
+ sound/soc/Makefile | 1 +
+ sound/soc/ralink/Kconfig | 15 ++
+ sound/soc/ralink/Makefile | 11 +
+ sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
+ sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
+ 7 files changed, 699 insertions(+)
+ create mode 100644 sound/soc/ralink/Kconfig
+ create mode 100644 sound/soc/ralink/Makefile
+ create mode 100644 sound/soc/ralink/mt7620-i2s.c
+ create mode 100644 sound/soc/ralink/mt7620-wm8960.c
+
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -78,6 +78,7 @@ source "sound/soc/mxs/Kconfig"
+ source "sound/soc/pxa/Kconfig"
+ source "sound/soc/qcom/Kconfig"
+ source "sound/soc/rockchip/Kconfig"
++source "sound/soc/ralink/Kconfig"
+ source "sound/soc/samsung/Kconfig"
+ source "sound/soc/sh/Kconfig"
+ source "sound/soc/sof/Kconfig"
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
+ obj-$(CONFIG_SND_SOC) += pxa/
+ obj-$(CONFIG_SND_SOC) += qcom/
+ obj-$(CONFIG_SND_SOC) += rockchip/
++obj-$(CONFIG_SND_SOC) += ralink/
+ obj-$(CONFIG_SND_SOC) += samsung/
+ obj-$(CONFIG_SND_SOC) += sh/
+ obj-$(CONFIG_SND_SOC) += sof/
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
+@@ -0,0 +1,8 @@
++config SND_RALINK_SOC_I2S
++ depends on RALINK && SND_SOC && !SOC_RT288X
++ select SND_SOC_GENERIC_DMAENGINE_PCM
++ select REGMAP_MMIO
++ tristate "SoC Audio (I2S protocol) for Ralink SoC"
++ help
++ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
++ based boards.
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
+@@ -0,0 +1,6 @@
++#
++# Ralink/MediaTek Platform Support
++#
++snd-soc-ralink-i2s-objs := ralink-i2s.o
++
++obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
+--- /dev/null
++++ b/sound/soc/ralink/ralink-i2s.c
+@@ -0,0 +1,966 @@
++/*
++ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
++ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/debugfs.h>
++#include <linux/of_device.h>
++#include <sound/pcm_params.h>
++#include <sound/dmaengine_pcm.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define DRV_NAME "ralink-i2s"
++
++#define I2S_REG_CFG0 0x00
++#define I2S_REG_INT_STATUS 0x04
++#define I2S_REG_INT_EN 0x08
++#define I2S_REG_FF_STATUS 0x0c
++#define I2S_REG_WREG 0x10
++#define I2S_REG_RREG 0x14
++#define I2S_REG_CFG1 0x18
++#define I2S_REG_DIVCMP 0x20
++#define I2S_REG_DIVINT 0x24
++
++/* I2S_REG_CFG0 */
++#define I2S_REG_CFG0_EN BIT(31)
++#define I2S_REG_CFG0_DMA_EN BIT(30)
++#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
++#define I2S_REG_CFG0_TX_EN BIT(24)
++#define I2S_REG_CFG0_RX_EN BIT(20)
++#define I2S_REG_CFG0_SLAVE BIT(16)
++#define I2S_REG_CFG0_RX_THRES 12
++#define I2S_REG_CFG0_TX_THRES 4
++#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++/* RT305x */
++#define I2S_REG_CFG0_CLK_DIS BIT(8)
++#define I2S_REG_CFG0_TXCH_SWAP BIT(3)
++#define I2S_REG_CFG0_TXCH1_OFF BIT(2)
++#define I2S_REG_CFG0_TXCH0_OFF BIT(1)
++#define I2S_REG_CFG0_SLAVE_EN BIT(0)
++/* RT3883 */
++#define I2S_REG_CFG0_RXCH_SWAP BIT(11)
++#define I2S_REG_CFG0_RXCH1_OFF BIT(10)
++#define I2S_REG_CFG0_RXCH0_OFF BIT(9)
++#define I2S_REG_CFG0_WS_INV BIT(0)
++/* MT7628 */
++#define I2S_REG_CFG0_FMT_LE BIT(29)
++#define I2S_REG_CFG0_SYS_BE BIT(28)
++#define I2S_REG_CFG0_NORM_24 BIT(18)
++#define I2S_REG_CFG0_DATA_24 BIT(17)
++
++/* I2S_REG_INT_STATUS */
++#define I2S_REG_INT_RX_FAULT BIT(7)
++#define I2S_REG_INT_RX_OVRUN BIT(6)
++#define I2S_REG_INT_RX_UNRUN BIT(5)
++#define I2S_REG_INT_RX_THRES BIT(4)
++#define I2S_REG_INT_TX_FAULT BIT(3)
++#define I2S_REG_INT_TX_OVRUN BIT(2)
++#define I2S_REG_INT_TX_UNRUN BIT(1)
++#define I2S_REG_INT_TX_THRES BIT(0)
++#define I2S_REG_INT_TX_MASK 0xf
++#define I2S_REG_INT_RX_MASK 0xf0
++
++/* I2S_REG_INT_STATUS */
++#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf)
++#define I2S_TX_AVCNT(x) (x & 0xf)
++/* MT7628 */
++#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f)
++#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f)
++
++/* I2S_REG_CFG1 */
++#define I2S_REG_CFG1_LBK BIT(31)
++#define I2S_REG_CFG1_EXTLBK BIT(30)
++/* RT3883 */
++#define I2S_REG_CFG1_LEFT_J BIT(0)
++#define I2S_REG_CFG1_RIGHT_J BIT(1)
++#define I2S_REG_CFG1_FMT_MASK 0x3
++
++/* I2S_REG_DIVCMP */
++#define I2S_REG_DIVCMP_CLKEN BIT(31)
++#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff
++
++/* I2S_REG_DIVINT */
++#define I2S_REG_DIVINT_MASK 0x3ff
++
++/* BCLK dividers */
++#define RALINK_I2S_DIVCMP 0
++#define RALINK_I2S_DIVINT 1
++
++/* FIFO */
++#define RALINK_I2S_FIFO_SIZE 32
++
++/* feature flags */
++#define RALINK_FLAGS_TXONLY BIT(0)
++#define RALINK_FLAGS_LEFT_J BIT(1)
++#define RALINK_FLAGS_RIGHT_J BIT(2)
++#define RALINK_FLAGS_ENDIAN BIT(3)
++#define RALINK_FLAGS_24BIT BIT(4)
++
++#define RALINK_I2S_INT_EN 0
++
++struct ralink_i2s_stats {
++ u32 dmafault;
++ u32 overrun;
++ u32 underrun;
++ u32 belowthres;
++};
++
++struct ralink_i2s {
++ struct device *dev;
++ void __iomem *regs;
++ struct clk *clk;
++ struct regmap *regmap;
++ u32 flags;
++ unsigned int fmt;
++ u16 txdma_req;
++ u16 rxdma_req;
++
++ struct snd_dmaengine_dai_dma_data playback_dma_data;
++ struct snd_dmaengine_dai_dma_data capture_dma_data;
++
++ struct dentry *dbg_dir;
++ struct dentry *dbg_stats;
++ struct ralink_i2s_stats txstats;
++ struct ralink_i2s_stats rxstats;
++};
++
++static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
++{
++ u32 buf[10];
++ int ret;
++
++ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
++ buf, ARRAY_SIZE(buf));
++
++ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
++ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
++ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
++ buf[0], buf[1], buf[2], buf[3], buf[4],
++ buf[5], buf[6], buf[8], buf[9]);
++}
++
++static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
++ int clk_id, unsigned int freq, int dir)
++{
++ return 0;
++}
++
++static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int div;
++ uint32_t data;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_CLK_DIS,
++ I2S_REG_CFG0_CLK_DIS);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
++ div = (clk / rate ) - 1;
++
++ data = rt_sysc_r32(0x30);
++ data &= (0xff << 8);
++ data |= (0x1 << 15) | (div << 8);
++ rt_sysc_w32(data, 0x30);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
++ clk, rate, div);
++
++ return 0;
++}
++
++static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int divint, divcomp;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_CLKEN, 0);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
++ clk = clk / (2 * 2 * width);
++ divint = clk / rate;
++ divcomp = ((clk % rate) * 512) / rate;
++
++ if ((divint > I2S_REG_DIVINT_MASK) ||
++ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
++ return -EINVAL;
++
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
++ I2S_REG_DIVINT_MASK, divint);
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
++ I2S_REG_DIVCMP_CLKEN);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
++ clk_get_rate(i2s->clk), rate, divint, divcomp);
++
++ return 0;
++}
++
++static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int cfg0 = 0, cfg1 = 0;
++
++ /* set master/slave audio interface */
++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++ case SND_SOC_DAIFMT_CBM_CFM:
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ cfg0 |= I2S_REG_CFG0_SLAVE_EN;
++ else
++ cfg0 |= I2S_REG_CFG0_SLAVE;
++ break;
++ case SND_SOC_DAIFMT_CBS_CFS:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ /* interface format */
++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++ case SND_SOC_DAIFMT_I2S:
++ break;
++ case SND_SOC_DAIFMT_RIGHT_J:
++ if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
++ cfg1 |= I2S_REG_CFG1_RIGHT_J;
++ break;
++ }
++ return -EINVAL;
++ case SND_SOC_DAIFMT_LEFT_J:
++ if (i2s->flags & RALINK_FLAGS_LEFT_J) {
++ cfg1 |= I2S_REG_CFG1_LEFT_J;
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ /* clock inversion */
++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++ case SND_SOC_DAIFMT_NB_NF:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE_EN, cfg0);
++ } else {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE, cfg0);
++ }
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
++ I2S_REG_CFG1_FMT_MASK, cfg1);
++ i2s->fmt = fmt;
++
++ return 0;
++}
++
++static int ralink_i2s_startup(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ if (snd_soc_dai_active(dai))
++ return 0;
++
++ /* setup status interrupt */
++#if (RALINK_I2S_INT_EN)
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
++#else
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
++#endif
++
++ /* enable */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_THRES_MASK,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_DFT_THRES);
++
++ return 0;
++}
++
++static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ /* If both streams are stopped, disable module and clock */
++ if (snd_soc_dai_active(dai))
++ return;
++
++ /*
++ * datasheet mention when disable all control regs are cleared
++ * to initial values. need reinit at startup.
++ */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
++}
++
++static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ int width;
++ int ret;
++
++ width = params_width(params);
++ switch (width) {
++ case 16:
++ if (i2s->flags & RALINK_FLAGS_24BIT)
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24, 0);
++ break;
++ case 24:
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24,
++ I2S_REG_CFG0_DATA_24);
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ switch (params_channels(params)) {
++ case 2:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ /* system endian */
++#ifdef SNDRV_LITTLE_ENDIAN
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE, 0);
++#else
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE,
++ I2S_REG_CFG0_SYS_BE);
++#endif
++
++ /* data endian */
++ switch (params_format(params)) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ case SNDRV_PCM_FORMAT_S24_LE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE,
++ I2S_REG_CFG0_FMT_LE);
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ case SNDRV_PCM_FORMAT_S24_BE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE, 0);
++ break;
++ default:
++ return -EINVAL;
++ }
++ }
++
++ /* setup bclk rate */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
++ else
++ ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
++
++ return ret;
++}
++
++static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int mask, val;
++
++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++ mask = I2S_REG_CFG0_TX_EN;
++ else
++ mask = I2S_REG_CFG0_RX_EN;
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ case SNDRV_PCM_TRIGGER_RESUME:
++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++ val = mask;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ case SNDRV_PCM_TRIGGER_SUSPEND:
++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++ val = 0;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
++
++ return 0;
++}
++
++static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
++ struct resource *res)
++{
++ struct snd_dmaengine_dai_dma_data *dma_data;
++
++ /* Playback */
++ dma_data = &i2s->playback_dma_data;
++ dma_data->addr = res->start + I2S_REG_WREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->txdma_req;
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ return;
++
++ /* Capture */
++ dma_data = &i2s->capture_dma_data;
++ dma_data->addr = res->start + I2S_REG_RREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->rxdma_req;
++}
++
++static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
++ &i2s->capture_dma_data);
++
++ return 0;
++}
++
++static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
++{
++ return 0;
++}
++
++static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
++ .set_sysclk = ralink_i2s_set_sysclk,
++ .set_fmt = ralink_i2s_set_fmt,
++ .startup = ralink_i2s_startup,
++ .shutdown = ralink_i2s_shutdown,
++ .hw_params = ralink_i2s_hw_params,
++ .trigger = ralink_i2s_trigger,
++};
++
++static struct snd_soc_dai_driver ralink_i2s_dai = {
++ .name = DRV_NAME,
++ .probe = ralink_i2s_dai_probe,
++ .remove = ralink_i2s_dai_remove,
++ .ops = &ralink_i2s_dai_ops,
++ .capture = {
++ .stream_name = "I2S Capture",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .playback = {
++ .stream_name = "I2S Playback",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .symmetric_rates = 1,
++};
++
++static struct snd_pcm_hardware ralink_pcm_hardware = {
++ .info = SNDRV_PCM_INFO_MMAP |
++ SNDRV_PCM_INFO_MMAP_VALID |
++ SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ .channels_min = 2,
++ .channels_max = 2,
++ .period_bytes_min = PAGE_SIZE,
++ .period_bytes_max = PAGE_SIZE * 2,
++ .periods_min = 2,
++ .periods_max = 128,
++ .buffer_bytes_max = 128 * 1024,
++ .fifo_size = RALINK_I2S_FIFO_SIZE,
++};
++
++static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++ .pcm_hardware = &ralink_pcm_hardware,
++ .prealloc_buffer_size = 256 * PAGE_SIZE,
++};
++
++static const struct snd_soc_component_driver ralink_i2s_component = {
++ .name = DRV_NAME,
++};
++
++static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
++{
++ return true;
++}
++
++static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_INT_STATUS:
++ case I2S_REG_FF_STATUS:
++ return true;
++ }
++ return false;
++}
++
++static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_FF_STATUS:
++ case I2S_REG_RREG:
++ return false;
++ }
++ return true;
++}
++
++static const struct regmap_config ralink_i2s_regmap_config = {
++ .reg_bits = 32,
++ .reg_stride = 4,
++ .val_bits = 32,
++ .writeable_reg = ralink_i2s_writeable_reg,
++ .readable_reg = ralink_i2s_readable_reg,
++ .volatile_reg = ralink_i2s_volatile_reg,
++ .max_register = I2S_REG_DIVINT,
++};
++
++#if (RALINK_I2S_INT_EN)
++static irqreturn_t ralink_i2s_irq(int irq, void *devid)
++{
++ struct ralink_i2s *i2s = devid;
++ u32 status;
++
++ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ /* tx stats */
++ if (status & I2S_REG_INT_TX_MASK) {
++ if (status & I2S_REG_INT_TX_THRES)
++ i2s->txstats.belowthres++;
++ if (status & I2S_REG_INT_TX_UNRUN)
++ i2s->txstats.underrun++;
++ if (status & I2S_REG_INT_TX_OVRUN)
++ i2s->txstats.overrun++;
++ if (status & I2S_REG_INT_TX_FAULT)
++ i2s->txstats.dmafault++;
++ }
++
++ /* rx stats */
++ if (status & I2S_REG_INT_RX_MASK) {
++ if (status & I2S_REG_INT_RX_THRES)
++ i2s->rxstats.belowthres++;
++ if (status & I2S_REG_INT_RX_UNRUN)
++ i2s->rxstats.underrun++;
++ if (status & I2S_REG_INT_RX_OVRUN)
++ i2s->rxstats.overrun++;
++ if (status & I2S_REG_INT_RX_FAULT)
++ i2s->rxstats.dmafault++;
++ }
++
++ /* clean status bits */
++ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
++
++ return IRQ_HANDLED;
++}
++#endif
++
++#if IS_ENABLED(CONFIG_DEBUG_FS)
++static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
++{
++ struct ralink_i2s *i2s = s->private;
++
++ seq_printf(s, "tx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
++
++ seq_printf(s, "rx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
++
++ ralink_i2s_dump_regs(i2s);
++
++ return 0;
++}
++
++static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, ralink_i2s_stats_show, inode->i_private);
++}
++
++static const struct file_operations ralink_i2s_stats_ops = {
++ .open = ralink_i2s_stats_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
++ if (!i2s->dbg_dir)
++ return -ENOMEM;
++
++ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
++ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
++ if (!i2s->dbg_stats) {
++ debugfs_remove(i2s->dbg_dir);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
++{
++ debugfs_remove(i2s->dbg_stats);
++ debugfs_remove(i2s->dbg_dir);
++}
++#else
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
++{
++}
++#endif
++
++/*
++ * TODO: these refclk setup functions should use
++ * clock framework instead. hardcode it now.
++ */
++static void rt3350_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data |= (0x1 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3883_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x3 << 13);
++ data |= (0x1 << 13);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3552_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0xf << 8);
++ data |= (0x3 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7620_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7621_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x1f << 18);
++ data |= (0x19 << 18);
++ data &= ~(0x1f << 12);
++ data |= (0x1 << 12);
++ data &= ~(0x7 << 9);
++ data |= (0x5 << 9);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7628_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set i2s and refclk digital pad */
++ data = rt_sysc_r32(0x3c);
++ data |= 0x1f;
++ rt_sysc_w32(data, 0x3c);
++
++ /* Adjust REFCLK0's driving strength */
++ data = rt_sysc_r32(0x1354);
++ data &= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1354);
++ data = rt_sysc_r32(0x1364);
++ data |= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1364);
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++struct rt_i2s_data {
++ u32 flags;
++ void (*refclk_setup)(void);
++};
++
++struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
++struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
++ .refclk_setup = rt3350_refclk_setup };
++struct rt_i2s_data rt3883_i2s_data = {
++ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
++ .refclk_setup = rt3883_refclk_setup };
++struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
++struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
++struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
++struct rt_i2s_data mt7628_i2s_data = {
++ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
++ RALINK_FLAGS_LEFT_J),
++ .refclk_setup = mt7628_refclk_setup};
++
++static const struct of_device_id ralink_i2s_match_table[] = {
++ { .compatible = "ralink,rt3050-i2s",
++ .data = (void *)&rt3050_i2s_data },
++ { .compatible = "ralink,rt3350-i2s",
++ .data = (void *)&rt3350_i2s_data },
++ { .compatible = "ralink,rt3883-i2s",
++ .data = (void *)&rt3883_i2s_data },
++ { .compatible = "ralink,rt3352-i2s",
++ .data = (void *)&rt3352_i2s_data },
++ { .compatible = "mediatek,mt7620-i2s",
++ .data = (void *)&mt7620_i2s_data },
++ { .compatible = "mediatek,mt7621-i2s",
++ .data = (void *)&mt7621_i2s_data },
++ { .compatible = "mediatek,mt7628-i2s",
++ .data = (void *)&mt7628_i2s_data },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
++
++static int ralink_i2s_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct device_node *np = pdev->dev.of_node;
++ struct ralink_i2s *i2s;
++ struct resource *res;
++ int irq, ret;
++ u32 dma_req;
++ struct rt_i2s_data *data;
++
++ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
++ if (!i2s)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, i2s);
++ i2s->dev = &pdev->dev;
++
++ match = of_match_device(ralink_i2s_match_table, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++ data = (struct rt_i2s_data *)match->data;
++ i2s->flags = data->flags;
++ /* setup out 12Mhz refclk to codec as mclk */
++ if (data->refclk_setup)
++ data->refclk_setup();
++
++ if (of_property_read_u32(np, "txdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no txdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->txdma_req = (u16)dma_req;
++ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
++ if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no rxdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->rxdma_req = (u16)dma_req;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ i2s->regs = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2s->regs))
++ return PTR_ERR(i2s->regs);
++
++ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
++ &ralink_i2s_regmap_config);
++ if (IS_ERR(i2s->regmap)) {
++ dev_err(&pdev->dev, "regmap init failed\n");
++ return PTR_ERR(i2s->regmap);
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++
++#if (RALINK_I2S_INT_EN)
++ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
++ 0, dev_name(&pdev->dev), i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return ret;
++ }
++#endif
++
++ i2s->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2s->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return PTR_ERR(i2s->clk);
++ }
++
++ ret = clk_prepare_enable(i2s->clk);
++ if (ret)
++ return ret;
++
++ ralink_i2s_init_dma_data(i2s, res);
++
++ device_reset(&pdev->dev);
++
++ ret = ralink_i2s_debugfs_create(i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "create debugfs failed\n");
++ goto err_clk_disable;
++ }
++
++ /* enable 24bits support */
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ }
++
++ /* enable big endian support */
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_i2s_dai.playback.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_pcm_hardware.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ }
++ }
++
++ /* disable capture support */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
++ 0);
++
++ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
++ &ralink_i2s_dai, 1);
++ if (ret)
++ goto err_debugfs;
++
++ ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
++ &ralink_dmaengine_pcm_config,
++ SND_DMAENGINE_PCM_FLAG_COMPAT);
++ if (ret)
++ goto err_debugfs;
++
++ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000);
++
++ return 0;
++
++err_debugfs:
++ ralink_i2s_debugfs_remove(i2s);
++
++err_clk_disable:
++ clk_disable_unprepare(i2s->clk);
++
++ return ret;
++}
++
++static int ralink_i2s_remove(struct platform_device *pdev)
++{
++ struct ralink_i2s *i2s = platform_get_drvdata(pdev);
++
++ ralink_i2s_debugfs_remove(i2s);
++ clk_disable_unprepare(i2s->clk);
++
++ return 0;
++}
++
++static struct platform_driver ralink_i2s_driver = {
++ .probe = ralink_i2s_probe,
++ .remove = ralink_i2s_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .of_match_table = ralink_i2s_match_table,
++ },
++};
++module_platform_driver(ralink_i2s_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
++MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" DRV_NAME);
--- /dev/null
+From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:31:08 +0100
+Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/serial_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -401,6 +401,9 @@ uart_get_baud_rate(struct uart_port *por
+ break;
+ }
+
++ if (tty_termios_baud_rate(termios) == 2500000)
++ return 250000;
++
+ for (try = 0; try < 2; try++) {
+ baud = tty_termios_baud_rate(termios);
+
--- /dev/null
+From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:16:50 +0100
+Subject: [PATCH 52/53] pwm: add mediatek support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pwm/Kconfig | 9 +++
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 183 insertions(+)
+ create mode 100644 drivers/pwm/pwm-mediatek.c
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -383,6 +383,15 @@ config PWM_MEDIATEK
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mediatek.
+
++config PWM_MEDIATEK_RAMIPS
++ tristate "Mediatek PWM support"
++ depends on RALINK && OF
++ help
++ Generic PWM framework driver for Mediatek ARM SoC.
++
++ To compile this driver as a module, choose M here: the module
++ will be called pwm-mxs.
++
+ config PWM_MXS
+ tristate "Freescale MXS PWM support"
+ depends on ARCH_MXS || COMPILE_TEST
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
+ obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
+ obj-$(CONFIG_PWM_MESON) += pwm-meson.o
+ obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
++obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
+ obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
+ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+ obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
+--- /dev/null
++++ b/drivers/pwm/pwm-mediatek-ramips.c
+@@ -0,0 +1,173 @@
++/*
++ * Mediatek Pulse Width Modulator driver
++ *
++ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pwm.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++
++#define NUM_PWM 4
++
++/* PWM registers and bits definitions */
++#define PWMCON 0x00
++#define PWMHDUR 0x04
++#define PWMLDUR 0x08
++#define PWMGDUR 0x0c
++#define PWMWAVENUM 0x28
++#define PWMDWIDTH 0x2c
++#define PWMTHRES 0x30
++
++/**
++ * struct mtk_pwm_chip - struct representing pwm chip
++ *
++ * @mmio_base: base address of pwm chip
++ * @chip: linux pwm chip representation
++ */
++struct mtk_pwm_chip {
++ void __iomem *mmio_base;
++ struct pwm_chip chip;
++};
++
++static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
++{
++ return container_of(chip, struct mtk_pwm_chip, chip);
++}
++
++static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
++ unsigned long offset)
++{
++ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
++ unsigned int num, unsigned long offset,
++ unsigned long val)
++{
++ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
++ int duty_ns, int period_ns)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 resolution = 100 / 4;
++ u32 clkdiv = 0;
++
++ while (period_ns / resolution > 8191) {
++ clkdiv++;
++ resolution *= 2;
++ }
++
++ if (clkdiv > 7)
++ return -1;
++
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
++ return 0;
++}
++
++static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val |= BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++
++ return 0;
++}
++
++static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val &= ~BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++}
++
++static const struct pwm_ops mtk_pwm_ops = {
++ .config = mtk_pwm_config,
++ .enable = mtk_pwm_enable,
++ .disable = mtk_pwm_disable,
++ .owner = THIS_MODULE,
++};
++
++static int mtk_pwm_probe(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc;
++ struct resource *r;
++ int ret;
++
++ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
++ if (!pc)
++ return -ENOMEM;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(pc->mmio_base))
++ return PTR_ERR(pc->mmio_base);
++
++ platform_set_drvdata(pdev, pc);
++
++ pc->chip.dev = &pdev->dev;
++ pc->chip.ops = &mtk_pwm_ops;
++ pc->chip.base = -1;
++ pc->chip.npwm = NUM_PWM;
++
++ ret = pwmchip_add(&pc->chip);
++ if (ret < 0)
++ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
++
++ return ret;
++}
++
++static int mtk_pwm_remove(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < NUM_PWM; i++)
++ pwm_disable(&pc->chip.pwms[i]);
++
++ return pwmchip_remove(&pc->chip);
++}
++
++static const struct of_device_id mtk_pwm_of_match[] = {
++ { .compatible = "mediatek,mt7628-pwm" },
++ { }
++};
++
++MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
++
++static struct platform_driver mtk_pwm_driver = {
++ .driver = {
++ .name = "mtk-pwm",
++ .owner = THIS_MODULE,
++ .of_match_table = mtk_pwm_of_match,
++ },
++ .probe = mtk_pwm_probe,
++ .remove = mtk_pwm_remove,
++};
++
++module_platform_driver(mtk_pwm_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_ALIAS("platform:mtk-pwm");
--- /dev/null
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -510,6 +510,12 @@ static int dwc2_driver_probe(struct plat
+ if (retval)
+ return retval;
+
++ /* Enable USB port before any regs access */
++ if (readl(hsotg->regs + PCGCTL) & 0x0f) {
++ writel(0x00, hsotg->regs + PCGCTL);
++ /* TODO: mdelay(25) here? vendor driver don't use it */
++ }
++
+ hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
+ retval = dwc2_get_dr_mode(hsotg);
--- /dev/null
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -50,6 +50,7 @@ obj-$(CONFIG_ECHO) += echo/
+ obj-$(CONFIG_CXL_BASE) += cxl/
+ obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o
+ obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
++obj-$(CONFIG_SOC_MT7620) += linkit.o
+ obj-$(CONFIG_OCXL) += ocxl/
+ obj-$(CONFIG_BCM_VK) += bcm-vk/
+ obj-y += cardreader/
+--- /dev/null
++++ b/drivers/misc/linkit.c
+@@ -0,0 +1,84 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/mtd/mtd.h>
++#include <linux/gpio.h>
++
++#define LINKIT_LATCH_GPIO 11
++
++struct linkit_hw_data {
++ char board[16];
++ char rev[16];
++};
++
++static void sanify_string(char *s)
++{
++ int i;
++
++ for (i = 0; i < 15; i++)
++ if (s[i] <= 0x20)
++ s[i] = '\0';
++ s[15] = '\0';
++}
++
++static int linkit_probe(struct platform_device *pdev)
++{
++ struct linkit_hw_data hw;
++ struct mtd_info *mtd;
++ size_t retlen;
++ int ret;
++
++ mtd = get_mtd_device_nm("factory");
++ if (IS_ERR(mtd))
++ return PTR_ERR(mtd);
++
++ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
++ put_mtd_device(mtd);
++
++ sanify_string(hw.board);
++ sanify_string(hw.rev);
++
++ dev_info(&pdev->dev, "Version : %s\n", hw.board);
++ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
++
++ if (!strcmp(hw.board, "LINKITS7688")) {
++ dev_info(&pdev->dev, "setting up bootstrap latch\n");
++
++ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
++ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
++ return -1;
++ }
++ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id linkit_match[] = {
++ { .compatible = "mediatek,linkit" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, linkit_match);
++
++static struct platform_driver linkit_driver = {
++ .probe = linkit_probe,
++ .driver = {
++ .name = "mtk-linkit",
++ .owner = THIS_MODULE,
++ .of_match_table = linkit_match,
++ },
++};
++
++int __init linkit_init(void)
++{
++ return platform_driver_register(&linkit_driver);
++}
++late_initcall_sync(linkit_init);
projects / openwrt / openwrt.git / commitdiff