FEATURES:=squashfs gpio
KERNEL_PATCHVER:=5.4
-KERNEL_TESTING_PATCHVER:=5.10
+KERNEL_TESTING_PATCHVER:=5.4
define Target/Description
Build firmware images for Ralink RT288x/RT3xxx based boards.
{
const __be32 *_phy_addr = NULL;
struct phy_device *phydev;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
int phy_mode;
-#else
- phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
-#endif
_phy_addr = of_get_property(phy_node, "reg", NULL);
return -EINVAL;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(phy_node);
if (phy_mode < 0) {
-#else
- of_get_phy_mode(phy_node, &phy_mode);
- if (phy_mode == PHY_INTERFACE_MODE_NA) {
-#endif
dev_err(priv->dev, "incorrect phy-mode %d\n", phy_mode);
priv->phy->phy_node[port] = NULL;
return -EINVAL;
const __be32 *id = of_get_property(np, "reg", NULL);
const __be32 *link;
int size;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
int phy_mode;
-#else
- phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
-#endif
if (!id || (be32_to_cpu(*id) != 0)) {
pr_err("%s: invalid port id\n", np->name);
return;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(np);
-#else
- of_get_phy_mode(np, &phy_mode);
-#endif
switch (phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
break;
return rx_done;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
static void fe_tx_timeout(struct net_device *dev)
-#else
-static void fe_tx_timeout(struct net_device *dev, unsigned int txqueue)
-#endif
{
struct fe_priv *priv = netdev_priv(dev);
struct fe_tx_ring *ring = &priv->tx_ring;
struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
const __be32 *_id = of_get_property(np, "reg", NULL);
const __be32 *phy_addr;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
- int phy_mode;
-#else
- phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
-#endif
- int size, id;
+ int phy_mode, size, id;
int shift = 12;
u32 val, mask = 0;
u32 val_delay = 0;
return;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(np);
-#else
- of_get_phy_mode(np, &phy_mode);
-#endif
switch (phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
mask = 0;
+++ /dev/null
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_OMEGA2P is not set
-CONFIG_DTB_RT_NONE=y
-# CONFIG_DTB_VOCORE2 is not set
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MT7621_WDT is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_GSW_MT7620=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_MT7620=y
-CONFIG_NET_RALINK_MT7620=y
-# CONFIG_NET_RALINK_RT3050 is not set
-CONFIG_NET_RALINK_SOC=y
-# CONFIG_NET_VENDOR_MEDIATEK is not set
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
+++ /dev/null
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DIMLIB=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_GNUBEE1 is not set
-# CONFIG_DTB_GNUBEE2 is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MT7621=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LED_TRIGGER_PHY=y
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIKROTIK=y
-CONFIG_MIKROTIK_RB_SYSFS=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550_BOOL is not set
-CONFIG_MIPS_CPU_SCACHE=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=4
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MT7621=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_ROUTERBOOT_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_MINOR_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_VIRT_CONCAT=y
-# CONFIG_MTK_HSDMA is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-# CONFIG_NET_VENDOR_RALINK is not set
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_DRIVERS_GENERIC=y
-CONFIG_PCI_MT7621=y
-CONFIG_PCI_MT7621_PHY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_RALINK_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SX150X=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_BQ32K=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SCHED_SMT=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_OMEGA2P is not set
-CONFIG_DTB_RT_NONE=y
-# CONFIG_DTB_VOCORE2 is not set
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_ESW_RT3050=y
-# CONFIG_NET_RALINK_MT7620 is not set
-CONFIG_NET_RALINK_RT3050=y
-CONFIG_NET_RALINK_SOC=y
-# CONFIG_NET_VENDOR_MEDIATEK is not set
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
+++ /dev/null
-From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Wed, 3 Feb 2021 10:21:41 +0100
-Subject: MIPS: ralink: manage low reset lines
-
-Reset lines with indices smaller than 8 are currently considered invalid
-by the rt2880-reset reset controller.
-
-The MT7621 SoC uses a number of these low reset lines. The DTS defines
-reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2.
-As a result of the above restriction, these resets cannot be asserted or
-de-asserted by the reset controller. In cases where the bootloader does
-not de-assert these lines, this results in e.g. the MT7621's internal
-switch staying in reset.
-
-Change the reset controller to only ignore the system reset, so all
-reset lines with index greater than 0 are considered valid.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Acked-by: John Crispin <john@phrozen.org>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/ralink/reset.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r
- {
- u32 val;
-
-- if (id < 8)
-+ if (id == 0)
- return -1;
-
- val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct
- {
- u32 val;
-
-- if (id < 8)
-+ if (id == 0)
- return -1;
-
- val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+++ /dev/null
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -158,6 +158,7 @@ source "drivers/net/ethernet/pasemi/Kcon
- source "drivers/net/ethernet/pensando/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/qualcomm/Kconfig"
-+source "drivers/net/ethernet/ralink/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
-+obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+++ /dev/null
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -57,6 +57,7 @@ choice
- select CLKSRC_MIPS_GIC
- select HAVE_PCI if PCI_MT7621
- select SOC_BUS
-+ select WEAK_REORDERING_BEYOND_LLSC
- endchoice
-
- choice
+++ /dev/null
---- a/drivers/staging/mt7621-pci-phy/Kconfig
-+++ b/drivers/staging/mt7621-pci-phy/Kconfig
-@@ -3,6 +3,7 @@ config PCI_MT7621_PHY
- tristate "MediaTek MT7621 PCI PHY Driver"
- depends on RALINK && OF
- select GENERIC_PHY
-+ select REGMAP_MMIO
- help
- Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
-
+++ /dev/null
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -135,4 +135,16 @@ static inline int mt7620_get_eco(void)
- return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
- }
-
-+static inline int mt7620_get_chipver(void)
-+{
-+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) &
-+ CHIP_REV_VER_MASK;
-+}
-+
-+static inline int mt7620_get_pkg(void)
-+{
-+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) &
-+ CHIP_REV_PKG_MASK;
-+}
-+
- #endif
+++ /dev/null
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
-
-Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new
-issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is
-not. As the prerequisite of custom memory map has been removed, this results
-in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this
-platform.
-
-v2: Correctly compare that usermem is not null.
-
-This patch adds the originally intended prerequisite again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -249,6 +249,8 @@ static unsigned long __init init_initrd(
- * Initialize the bootmem allocator. It also setup initrd related data
- * if needed.
- */
-+static int usermem __initdata;
-+
- #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA))
-
- static void __init bootmem_init(void)
-@@ -288,7 +290,7 @@ static void __init bootmem_init(void)
- /*
- * Reserve any memory between the start of RAM and PHYS_OFFSET
- */
-- if (ramstart > PHYS_OFFSET)
-+ if (usermem && ramstart > PHYS_OFFSET)
- memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET);
-
- if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) {
-@@ -336,8 +338,6 @@ static void __init bootmem_init(void)
-
- #endif /* CONFIG_SGI_IP27 */
-
--static int usermem __initdata;
--
- static int __init early_parse_mem(char *p)
- {
- phys_addr_t start, size;
+++ /dev/null
-From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,12 +1,17 @@
- # SPDX-License-Identifier: GPL-2.0
- if RALINK
-
-+config CEVT_SYSTICK_QUIRK
-+ bool
-+ default n
-+
- config CLKEVT_RT3352
- bool
- depends on SOC_RT305X || SOC_MT7620
- default y
- select TIMER_OF
- select CLKSRC_MMIO
-+ select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
- bool
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -16,6 +16,31 @@
- #include <asm/time.h>
- #include <asm/cevt-r4k.h>
-
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+static int mips_state_oneshot(struct clock_event_device *evt)
-+{
-+ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-+ if (!cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 1;
-+ if (request_irq(evt->irq, c0_compare_interrupt, flags, "timer",
-+ c0_compare_interrupt))
-+ pr_err("Failed to request irq %d (timer)\n", evt->irq);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mips_state_shutdown(struct clock_event_device *evt)
-+{
-+ if (cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 0;
-+ free_irq(evt->irq, NULL);
-+ }
-+
-+ return 0;
-+}
-+#endif
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -296,7 +321,9 @@ core_initcall(r4k_register_cpufreq_notif
-
- int r4k_clockevent_init(void)
- {
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-+#endif
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
- unsigned int irq, min_delta;
-@@ -326,11 +353,16 @@ int r4k_clockevent_init(void)
- cd->rating = 300;
- cd->irq = irq;
- cd->cpumask = cpumask_of(cpu);
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+ cd->set_state_shutdown = mips_state_shutdown;
-+ cd->set_state_oneshot = mips_state_oneshot;
-+#endif
- cd->set_next_event = mips_next_event;
- cd->event_handler = mips_event_handler;
-
- clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
-
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- if (cp0_timer_irq_installed)
- return 0;
-
-@@ -339,6 +371,7 @@ int r4k_clockevent_init(void)
- if (request_irq(irq, c0_compare_interrupt, flags, "timer",
- c0_compare_interrupt))
- pr_err("Failed to request irq %d (timer)\n", irq);
-+#endif
-
- return 0;
- }
+++ /dev/null
-From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
-
-This feature will break udelay() and cause the delay loop to have longer delays
-when the frequency is scaled causing a performance hit.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -29,6 +29,10 @@
- /* enable the counter */
- #define CFG_CNT_EN 0x1
-
-+/* mt7620 frequency scaling defines */
-+#define CLK_LUT_CFG 0x40
-+#define SLEEP_EN BIT(31)
-+
- struct systick_device {
- void __iomem *membase;
- struct clock_event_device dev;
-@@ -36,21 +40,53 @@ struct systick_device {
- int freq_scale;
- };
-
-+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
-+
- static int systick_set_oneshot(struct clock_event_device *evt);
- static int systick_shutdown(struct clock_event_device *evt);
-
-+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
-+{
-+ if (sdev->freq_scale == status)
-+ return;
-+
-+ sdev->freq_scale = status;
-+
-+ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
-+ (status) ? ("enable") : ("disable"));
-+ if (status)
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-+ else
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
-+}
-+
-+static inline unsigned int read_count(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COUNT);
-+}
-+
-+static inline unsigned int read_compare(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COMPARE);
-+}
-+
-+static inline void write_compare(struct systick_device *sdev, unsigned int val)
-+{
-+ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
-+}
-+
- static int systick_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
- struct systick_device *sdev;
-- u32 count;
-+ int res;
-
- sdev = container_of(evt, struct systick_device, dev);
-- count = ioread32(sdev->membase + SYSTICK_COUNT);
-- count = (count + delta) % SYSTICK_FREQ;
-- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-+ delta += read_count(sdev);
-+ write_compare(sdev, delta);
-+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
-
-- return 0;
-+ return res;
- }
-
- static void systick_event_handler(struct clock_event_device *dev)
-@@ -60,20 +96,25 @@ static void systick_event_handler(struct
-
- static irqreturn_t systick_interrupt(int irq, void *dev_id)
- {
-- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
-+ int ret = 0;
-+ struct clock_event_device *cdev;
-+ struct systick_device *sdev;
-
-- dev->event_handler(dev);
-+ if (read_c0_cause() & STATUSF_IP7) {
-+ cdev = (struct clock_event_device *) dev_id;
-+ sdev = container_of(cdev, struct systick_device, dev);
-+
-+ /* Clear Count/Compare Interrupt */
-+ write_compare(sdev, read_compare(sdev));
-+ cdev->event_handler(cdev);
-+ ret = 1;
-+ }
-
-- return IRQ_HANDLED;
-+ return IRQ_RETVAL(ret);
- }
-
- static struct systick_device systick = {
- .dev = {
-- /*
-- * cevt-r4k uses 300, make sure systick
-- * gets used if available
-- */
-- .rating = 310,
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = systick_next_event,
- .set_state_shutdown = systick_shutdown,
-@@ -91,7 +132,13 @@ static int systick_shutdown(struct clock
- if (sdev->irq_requested)
- free_irq(systick.dev.irq, &systick.dev);
- sdev->irq_requested = 0;
-- iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 0);
-+
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 1);
-
- return 0;
- }
-@@ -116,33 +163,46 @@ static int systick_set_oneshot(struct cl
- return 0;
- }
-
-+static const struct of_device_id systick_match[] = {
-+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
-+ {},
-+};
-+
- static int __init ralink_systick_init(struct device_node *np)
- {
-- int ret;
-+ const struct of_device_id *match;
-+ int rating = 200;
-
- systick.membase = of_iomap(np, 0);
- if (!systick.membase)
- return -ENXIO;
-
-- systick.dev.name = np->name;
-- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
-- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
-- systick.dev.max_delta_ticks = 0x7fff;
-- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
-- systick.dev.min_delta_ticks = 0x3;
-+ match = of_match_node(systick_match, np);
-+ if (match) {
-+ systick_freq_scaling = match->data;
-+ /*
-+ * cevt-r4k uses 300, make sure systick
-+ * gets used if available
-+ */
-+ rating = 310;
-+ }
-+
-+ /* enable counter than register clock source */
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
-+
-+ /* register clock event */
- systick.dev.irq = irq_of_parse_and_map(np, 0);
- if (!systick.dev.irq) {
- pr_err("%pOFn: request_irq failed", np);
- return -EINVAL;
- }
-
-- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-- SYSTICK_FREQ, 301, 16,
-- clocksource_mmio_readl_up);
-- if (ret)
-- return ret;
--
-- clockevents_register_device(&systick.dev);
-+ systick.dev.name = np->name;
-+ systick.dev.rating = rating;
-+ systick.dev.cpumask = cpumask_of(0);
-+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
-
- pr_info("%pOFn: running - mult: %d, shift: %d\n",
- np, systick.dev.mult, systick.dev.shift);
+++ /dev/null
-From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 18:46:02 +0200
-Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -80,6 +80,8 @@ void __init plat_mem_setup(void)
-
- __dt_setup_arch(dtb);
-
-+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-+
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+++ /dev/null
-From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 31 Dec 2020 18:49:12 +0100
-Subject: [PATCH] MIPS: add bootargs-override property
-
-Add support for the bootargs-override property to the chosen node
-similar to the one used on ipq806x or mpc85xx.
-
-This is necessary, as the U-Boot used on some boards, notably the
-Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen
-node leading to a kernel panic when loading OpenWrt.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -542,8 +542,28 @@ static int __init bootcmdline_scan_chose
-
- #endif /* CONFIG_OF_EARLY_FLATTREE */
-
-+static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname,
-+ int depth, void *data)
-+{
-+ bool *dt_bootargs = data;
-+ const char *p;
-+ int l;
-+
-+ if (depth != 1 || !data || strcmp(uname, "chosen") != 0)
-+ return 0;
-+
-+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+ if (p != NULL && l > 0) {
-+ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
-+ *dt_bootargs = true;
-+ }
-+
-+ return 1;
-+}
-+
- static void __init bootcmdline_init(void)
- {
-+ bool dt_bootargs_override = false;
- bool dt_bootargs = false;
-
- /*
-@@ -557,6 +577,14 @@ static void __init bootcmdline_init(void
- }
-
- /*
-+ * If bootargs-override in the chosen node is set, use this as the
-+ * command line
-+ */
-+ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override);
-+ if (dt_bootargs_override)
-+ return;
-+
-+ /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
+++ /dev/null
-From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:15:32 +0100
-Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/setup.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -694,8 +694,6 @@ static void __init arch_mem_init(char **
- if (crashk_res.start != crashk_res.end)
- memblock_reserve(crashk_res.start, resource_size(&crashk_res));
- #endif
-- device_tree_init();
--
- /*
- * In order to reduce the possibility of kernel panic when failed to
- * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
-@@ -815,6 +813,7 @@ void __init setup_arch(char **cmdline_p)
-
- cpu_cache_init();
- paging_init();
-+ device_tree_init();
- }
-
- unsigned long kernelsp[NR_CPUS];
+++ /dev/null
-From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:18:05 +0100
-Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
- default
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -14,9 +14,9 @@ config CLKEVT_RT3352
- select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
-- bool
-+ bool "illegal access irq"
- depends on SOC_RT305X
-- default y
-+ default n
-
- config IRQ_INTC
- bool
+++ /dev/null
-There is a variant of MT7621 which contains only one CPU core instead of 2.
-This is not reflected in the config register, so the kernel detects more
-physical cores, which leads to a hang on SMP bringup.
-Add a hack to detect missing cores.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/arch/mips/kernel/smp-cps.c
-+++ b/arch/mips/kernel/smp-cps.c
-@@ -43,6 +43,11 @@ static unsigned core_vpe_count(unsigned
- return mips_cps_numvps(cluster, core);
- }
-
-+bool __weak plat_cpu_core_present(int core)
-+{
-+ return true;
-+}
-+
- static void __init cps_smp_setup(void)
- {
- unsigned int nclusters, ncores, nvpes, core_vpes;
-@@ -60,6 +65,8 @@ static void __init cps_smp_setup(void)
-
- ncores = mips_cps_numcores(cl);
- for (c = 0; c < ncores; c++) {
-+ if (!plat_cpu_core_present(c))
-+ continue;
- core_vpes = core_vpe_count(cl, c);
-
- if (c > 0)
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -15,6 +15,7 @@
- #include <asm/mips-cps.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7621.h>
-+#include <asm/mips-boards/launch.h>
-
- #include <pinmux.h>
-
-@@ -146,6 +147,20 @@ static void soc_dev_init(struct ralink_s
- }
- }
-
-+bool plat_cpu_core_present(int core)
-+{
-+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-+
-+ if (!core)
-+ return true;
-+ launch += core * 2; /* 2 VPEs per core */
-+ if (!(launch->flags & LAUNCH_FREADY))
-+ return false;
-+ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE))
-+ return false;
-+ return true;
-+}
-+
- void prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+++ /dev/null
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -9,6 +9,7 @@
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/sys_soc.h>
-+#include <linux/jiffies.h>
-
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
-@@ -16,6 +17,7 @@
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7621.h>
- #include <asm/mips-boards/launch.h>
-+#include <asm/delay.h>
-
- #include <pinmux.h>
-
-@@ -161,6 +163,58 @@ bool plat_cpu_core_present(int core)
- return true;
- }
-
-+#define LPS_PREC 8
-+/*
-+* Re-calibration lpj(loop-per-jiffy).
-+* (derived from kernel/calibrate.c)
-+*/
-+static int udelay_recal(void)
-+{
-+ unsigned int i, lpj = 0;
-+ unsigned long ticks, loopbit;
-+ int lps_precision = LPS_PREC;
-+
-+ lpj = (1<<12);
-+
-+ while ((lpj <<= 1) != 0) {
-+ /* wait for "start of" clock tick */
-+ ticks = jiffies;
-+ while (ticks == jiffies)
-+ /* nothing */;
-+
-+ /* Go .. */
-+ ticks = jiffies;
-+ __delay(lpj);
-+ ticks = jiffies - ticks;
-+ if (ticks)
-+ break;
-+ }
-+
-+ /*
-+ * Do a binary approximation to get lpj set to
-+ * equal one clock (up to lps_precision bits)
-+ */
-+ lpj >>= 1;
-+ loopbit = lpj;
-+ while (lps_precision-- && (loopbit >>= 1)) {
-+ lpj |= loopbit;
-+ ticks = jiffies;
-+ while (ticks == jiffies)
-+ /* nothing */;
-+ ticks = jiffies;
-+ __delay(lpj);
-+ if (jiffies != ticks) /* longer than 1 tick */
-+ lpj &= ~loopbit;
-+ }
-+ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj);
-+
-+ for(i=0; i< NR_CPUS; i++)
-+ cpu_data[i].udelay_val = lpj;
-+
-+ return 0;
-+}
-+device_initcall(udelay_recal);
-+
- void prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -63,6 +63,7 @@ choice
- select HAVE_PCI if PCI_MT7621
- select SOC_BUS
- select WEAK_REORDERING_BEYOND_LLSC
-+ select GENERIC_CLOCKEVENTS_BROADCAST
- endchoice
-
- choice
+++ /dev/null
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -17,6 +17,10 @@
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
-+#define SYSC_REG_CLKCFG0 0x2c
-+#define SYSC_REG_CUR_CLK_STS 0x44
-+
-+#define MEMC_REG_CPU_PLL 0x648
-
- #define CHIP_REV_PKG_MASK 0x1
- #define CHIP_REV_PKG_SHIFT 16
-@@ -24,6 +28,22 @@
- #define CHIP_REV_VER_SHIFT 8
- #define CHIP_REV_ECO_MASK 0xf
-
-+#define XTAL_MODE_SEL_MASK 0x7
-+#define XTAL_MODE_SEL_SHIFT 6
-+
-+#define CPU_CLK_SEL_MASK 0x3
-+#define CPU_CLK_SEL_SHIFT 30
-+
-+#define CUR_CPU_FDIV_MASK 0x1f
-+#define CUR_CPU_FDIV_SHIFT 8
-+#define CUR_CPU_FFRAC_MASK 0x1f
-+#define CUR_CPU_FFRAC_SHIFT 0
-+
-+#define CPU_PLL_PREDIV_MASK 0x3
-+#define CPU_PLL_PREDIV_SHIFT 12
-+#define CPU_PLL_FBDIV_MASK 0x7f
-+#define CPU_PLL_FBDIV_SHIFT 4
-+
- #define MT7621_DRAM_BASE 0x0
- #define MT7621_DDR2_SIZE_MIN 32
- #define MT7621_DDR2_SIZE_MAX 256
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -10,6 +10,10 @@
- #include <linux/slab.h>
- #include <linux/sys_soc.h>
- #include <linux/jiffies.h>
-+#include <linux/clk.h>
-+#include <linux/clkdev.h>
-+#include <linux/clk-provider.h>
-+#include <dt-bindings/clock/mt7621-clk.h>
-
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
-@@ -18,6 +22,7 @@
- #include <asm/mach-ralink/mt7621.h>
- #include <asm/mips-boards/launch.h>
- #include <asm/delay.h>
-+#include <asm/time.h>
-
- #include <pinmux.h>
-
-@@ -108,11 +113,89 @@ static struct rt2880_pmx_group mt7621_pi
- { 0 }
- };
-
-+static struct clk *clks[MT7621_CLK_MAX];
-+static struct clk_onecell_data clk_data = {
-+ .clks = clks,
-+ .clk_num = ARRAY_SIZE(clks),
-+};
-+
- phys_addr_t mips_cpc_default_phys_base(void)
- {
- panic("Cannot detect cpc address");
- }
-
-+static struct clk *__init mt7621_add_sys_clkdev(
-+ const char *id, unsigned long rate)
-+{
-+ struct clk *clk;
-+ int err;
-+
-+ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+ if (IS_ERR(clk))
-+ panic("failed to allocate %s clock structure", id);
-+
-+ err = clk_register_clkdev(clk, id, NULL);
-+ if (err)
-+ panic("unable to register %s clock device", id);
-+
-+ return clk;
-+}
-+
-+void __init ralink_clk_init(void)
-+{
-+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-+ u32 pll, prediv, fbdiv;
-+ u32 xtal_clk, cpu_clk, bus_clk;
-+ const static u32 prediv_tbl[] = {0, 1, 2, 2};
-+
-+ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-+ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
-+
-+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
-+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
-+
-+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
-+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
-+
-+ if (xtal_sel <= 2)
-+ xtal_clk = 20 * 1000 * 1000;
-+ else if (xtal_sel <= 5)
-+ xtal_clk = 40 * 1000 * 1000;
-+ else
-+ xtal_clk = 25 * 1000 * 1000;
-+
-+ switch (clk_sel) {
-+ case 0:
-+ cpu_clk = 500 * 1000 * 1000;
-+ break;
-+ case 1:
-+ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
-+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
-+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
-+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
-+ break;
-+ default:
-+ cpu_clk = xtal_clk;
-+ }
-+
-+ cpu_clk = cpu_clk / ffiv * ffrac;
-+ bus_clk = cpu_clk / 4;
-+
-+ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
-+ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
-+
-+ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
-+ mips_hpt_frequency = cpu_clk / 2;
-+}
-+
-+static void __init mt7621_clocks_init_dt(struct device_node *np)
-+{
-+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-+}
-+
-+CLK_OF_DECLARE(mt7621, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
-+
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
---- a/arch/mips/ralink/timer-gic.c
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -9,14 +9,14 @@
-
- #include <linux/of.h>
- #include <linux/of_clk.h>
--#include <linux/clocksource.h>
-+#include <asm/time.h>
-
- #include "common.h"
-
- void __init plat_time_init(void)
- {
- ralink_of_remap();
--
-+ ralink_clk_init();
- of_clk_init(NULL);
- timer_probe();
- }
---- /dev/null
-+++ b/include/dt-bindings/clock/mt7621-clk.h
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __DT_BINDINGS_MT7621_CLK_H
-+#define __DT_BINDINGS_MT7621_CLK_H
-+
-+#define MT7621_CLK_CPU 0
-+#define MT7621_CLK_BUS 1
-+
-+#define MT7621_CLK_MAX 2
-+
-+#endif /* __DT_BINDINGS_MT7621_CLK_H */
+++ /dev/null
-From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 10 Jul 2019 00:24:48 +0800
-Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support
-
-mt7621 has the following memory map:
-0x0-0x1c000000: lower 448m memory
-0x1c000000-0x2000000: peripheral registers
-0x20000000-0x2400000: higher 64m memory
-
-detect_memory_region in arch/mips/kernel/setup.c only add the first
-memory region and isn't suitable for 512m memory detection because
-it may accidentally read the memory area for peripheral registers.
-
-This commit adds memory detection capability for mt7621:
-1. add the highmem area when 512m is detected.
-2. guard memcmp from accessing peripheral registers:
- This only happens when some weird user decided to change
- kernel load address to 256m or higher address. Since this
- is a quite unusual case, we just skip 512m testing and return
- 256m as memory size.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++---
- arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++---
- 2 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -44,9 +44,10 @@
- #define CPU_PLL_FBDIV_MASK 0x7f
- #define CPU_PLL_FBDIV_SHIFT 4
-
--#define MT7621_DRAM_BASE 0x0
--#define MT7621_DDR2_SIZE_MIN 32
--#define MT7621_DDR2_SIZE_MAX 256
-+#define MT7621_LOWMEM_BASE 0x0
-+#define MT7621_LOWMEM_MAX_SIZE 0x1C000000
-+#define MT7621_HIGHMEM_BASE 0x20000000
-+#define MT7621_HIGHMEM_SIZE 0x4000000
-
- #define MT7621_CHIP_NAME0 0x3637544D
- #define MT7621_CHIP_NAME1 0x20203132
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -10,11 +10,13 @@
- #include <linux/slab.h>
- #include <linux/sys_soc.h>
- #include <linux/jiffies.h>
-+#include <linux/memblock.h>
- #include <linux/clk.h>
- #include <linux/clkdev.h>
- #include <linux/clk-provider.h>
- #include <dt-bindings/clock/mt7621-clk.h>
-
-+#include <asm/bootinfo.h>
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
- #include <asm/mips-cps.h>
-@@ -57,6 +59,8 @@
- #define MT7621_GPIO_MODE_SDHCI_SHIFT 18
- #define MT7621_GPIO_MODE_SDHCI_GPIO 1
-
-+static void *detect_magic __initdata = detect_memory_region;
-+
- static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
- static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
- static struct rt2880_pmx_func uart3_grp[] = {
-@@ -141,6 +145,26 @@ static struct clk *__init mt7621_add_sys
- return clk;
- }
-
-+void __init mt7621_memory_detect(void)
-+{
-+ void *dm = &detect_magic;
-+ phys_addr_t size;
-+
-+ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
-+ if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic)))
-+ break;
-+ }
-+
-+ if ((size == 256 * SZ_1M) &&
-+ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
-+ __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) {
-+ memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
-+ memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
-+ } else {
-+ memblock_add(MT7621_LOWMEM_BASE, size);
-+ }
-+}
-+
- void __init ralink_clk_init(void)
- {
- u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-@@ -346,10 +370,7 @@ void prom_soc_init(struct ralink_soc_inf
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
-
-- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
-- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
-- soc_info->mem_base = MT7621_DRAM_BASE;
--
-+ soc_info->mem_detect = mt7621_memory_detect;
- rt2880_pinmux_data = mt7621_pinmux_data;
-
- soc_dev_init(soc_info, rev);
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -17,6 +17,7 @@ struct ralink_soc_info {
- unsigned long mem_size;
- unsigned long mem_size_min;
- unsigned long mem_size_max;
-+ void (*mem_detect)(void);
- };
- extern struct ralink_soc_info soc_info;
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -85,6 +85,8 @@ void __init plat_mem_setup(void)
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-+ else if (soc_info.mem_detect)
-+ soc_info.mem_detect();
- else if (soc_info.mem_size)
- memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M);
- else
+++ /dev/null
---- a/arch/mips/ralink/irq-gic.c
-+++ b/arch/mips/ralink/irq-gic.c
-@@ -13,6 +13,12 @@
-
- int get_c0_perfcount_int(void)
- {
-+ /*
-+ * Performance counter events are routed through GIC.
-+ * Prevent them from firing on CPU IRQ7 as well
-+ */
-+ clear_c0_status(IE_SW0 << 7);
-+
- return gic_get_c0_perfcount_int();
- }
- EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+++ /dev/null
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -32,6 +32,7 @@
- #define PPLL_CFG1 0x9c
-
- #define PPLL_DRV 0xa0
-+#define PPLL_LD BIT(23)
- #define PDRV_SW_SET BIT(31)
- #define LC_CKDRVPD BIT(19)
- #define LC_CKDRVOHZ BIT(18)
-@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla
- rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
- mdelay(100);
-
-- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
-- dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
-+ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
-+ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n");
- reset_control_assert(rstpcie0);
- rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- return -1;
+++ /dev/null
-From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_RETRIES 3
-
+++ /dev/null
-From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 1 Apr 2020 02:07:58 +0800
-Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand
- flash controller
-
-This patch adds NAND flash controller driver for MediaTek MT7621 SoC.
-
-The NAND flash controller is similar with controllers described in
-mtk_nand.c, except that the controller from MT7621 doesn't support DMA
-transmission, and some registers' offset and fields are different.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- drivers/mtd/nand/raw/Kconfig | 8 +
- drivers/mtd/nand/raw/Makefile | 1 +
- drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 1357 insertions(+)
- create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -387,6 +387,14 @@ config MTD_NAND_QCOM
- Enables support for NAND flash chips on SoCs containing the EBI2 NAND
- controller. This controller is found on IPQ806x SoC.
-
-+config MTD_NAND_MT7621
-+ tristate "MT7621 NAND controller"
-+ depends on SOC_MT7621 || COMPILE_TEST
-+ depends on HAS_IOMEM
-+ help
-+ Enables support for NAND controller on MT7621 SoC.
-+ This driver uses PIO mode for data transmission instead of DMA mode.
-+
- config MTD_NAND_MTK
- tristate "MTK NAND controller"
- depends on ARCH_MEDIATEK || COMPILE_TEST
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
- obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
- obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
-+obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o
- obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
- obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o
- obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/raw/mt7621_nand.c
-@@ -0,0 +1,1353 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek MT7621 NAND Flash Controller driver
-+ *
-+ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
-+ *
-+ * Author: Weijie Gao <weijie.gao@mediatek.com>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/sizes.h>
-+#include <linux/iopoll.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/rawnand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <asm/addrspace.h>
-+
-+/* NFI core registers */
-+#define NFI_CNFG 0x000
-+#define CNFG_OP_MODE_S 12
-+#define CNFG_OP_MODE_M GENMASK(14, 12)
-+#define CNFG_OP_CUSTOM 6
-+#define CNFG_AUTO_FMT_EN BIT(9)
-+#define CNFG_HW_ECC_EN BIT(8)
-+#define CNFG_BYTE_RW BIT(6)
-+#define CNFG_READ_MODE BIT(1)
-+
-+#define NFI_PAGEFMT 0x004
-+#define PAGEFMT_FDM_ECC_S 12
-+#define PAGEFMT_FDM_ECC_M GENMASK(15, 12)
-+#define PAGEFMT_FDM_S 8
-+#define PAGEFMT_FDM_M GENMASK(11, 8)
-+#define PAGEFMT_SPARE_S 4
-+#define PAGEFMT_SPARE_M GENMASK(5, 4)
-+#define PAGEFMT_PAGE_S 0
-+#define PAGEFMT_PAGE_M GENMASK(1, 0)
-+
-+#define NFI_CON 0x008
-+#define CON_NFI_SEC_S 12
-+#define CON_NFI_SEC_M GENMASK(15, 12)
-+#define CON_NFI_BWR BIT(9)
-+#define CON_NFI_BRD BIT(8)
-+#define CON_NFI_RST BIT(1)
-+#define CON_FIFO_FLUSH BIT(0)
-+
-+#define NFI_ACCCON 0x00c
-+#define ACCCON_POECS_S 28
-+#define ACCCON_POECS_MAX 0x0f
-+#define ACCCON_POECS_DEF 3
-+#define ACCCON_PRECS_S 22
-+#define ACCCON_PRECS_MAX 0x3f
-+#define ACCCON_PRECS_DEF 3
-+#define ACCCON_C2R_S 16
-+#define ACCCON_C2R_MAX 0x3f
-+#define ACCCON_C2R_DEF 7
-+#define ACCCON_W2R_S 12
-+#define ACCCON_W2R_MAX 0x0f
-+#define ACCCON_W2R_DEF 7
-+#define ACCCON_WH_S 8
-+#define ACCCON_WH_MAX 0x0f
-+#define ACCCON_WH_DEF 15
-+#define ACCCON_WST_S 4
-+#define ACCCON_WST_MAX 0x0f
-+#define ACCCON_WST_DEF 15
-+#define ACCCON_WST_MIN 3
-+#define ACCCON_RLT_S 0
-+#define ACCCON_RLT_MAX 0x0f
-+#define ACCCON_RLT_DEF 15
-+#define ACCCON_RLT_MIN 3
-+
-+#define NFI_CMD 0x020
-+
-+#define NFI_ADDRNOB 0x030
-+#define ADDR_ROW_NOB_S 4
-+#define ADDR_ROW_NOB_M GENMASK(6, 4)
-+#define ADDR_COL_NOB_S 0
-+#define ADDR_COL_NOB_M GENMASK(2, 0)
-+
-+#define NFI_COLADDR 0x034
-+#define NFI_ROWADDR 0x038
-+
-+#define NFI_STRDATA 0x040
-+#define STR_DATA BIT(0)
-+
-+#define NFI_CNRNB 0x044
-+#define CB2R_TIME_S 4
-+#define CB2R_TIME_M GENMASK(7, 4)
-+#define STR_CNRNB BIT(0)
-+
-+#define NFI_DATAW 0x050
-+#define NFI_DATAR 0x054
-+
-+#define NFI_PIO_DIRDY 0x058
-+#define PIO_DIRDY BIT(0)
-+
-+#define NFI_STA 0x060
-+#define STA_NFI_FSM_S 16
-+#define STA_NFI_FSM_M GENMASK(19, 16)
-+#define STA_FSM_CUSTOM_DATA 14
-+#define STA_BUSY BIT(8)
-+#define STA_ADDR BIT(1)
-+#define STA_CMD BIT(0)
-+
-+#define NFI_ADDRCNTR 0x070
-+#define SEC_CNTR_S 12
-+#define SEC_CNTR_M GENMASK(15, 12)
-+#define SEC_ADDR_S 0
-+#define SEC_ADDR_M GENMASK(9, 0)
-+
-+#define NFI_CSEL 0x090
-+#define CSEL_S 0
-+#define CSEL_M GENMASK(1, 0)
-+
-+#define NFI_FDM0L 0x0a0
-+#define NFI_FDML(n) (0x0a0 + ((n) << 3))
-+
-+#define NFI_FDM0M 0x0a4
-+#define NFI_FDMM(n) (0x0a4 + ((n) << 3))
-+
-+#define NFI_MASTER_STA 0x210
-+#define MAS_ADDR GENMASK(11, 9)
-+#define MAS_RD GENMASK(8, 6)
-+#define MAS_WR GENMASK(5, 3)
-+#define MAS_RDDLY GENMASK(2, 0)
-+
-+/* ECC engine registers */
-+#define ECC_ENCCON 0x000
-+#define ENC_EN BIT(0)
-+
-+#define ECC_ENCCNFG 0x004
-+#define ENC_CNFG_MSG_S 16
-+#define ENC_CNFG_MSG_M GENMASK(28, 16)
-+#define ENC_MODE_S 4
-+#define ENC_MODE_M GENMASK(5, 4)
-+#define ENC_MODE_NFI 1
-+#define ENC_TNUM_S 0
-+#define ENC_TNUM_M GENMASK(2, 0)
-+
-+#define ECC_ENCIDLE 0x00c
-+#define ENC_IDLE BIT(0)
-+
-+#define ECC_DECCON 0x100
-+#define DEC_EN BIT(0)
-+
-+#define ECC_DECCNFG 0x104
-+#define DEC_EMPTY_EN BIT(31)
-+#define DEC_CS_S 16
-+#define DEC_CS_M GENMASK(28, 16)
-+#define DEC_CON_S 12
-+#define DEC_CON_M GENMASK(13, 12)
-+#define DEC_CON_EL 2
-+#define DEC_MODE_S 4
-+#define DEC_MODE_M GENMASK(5, 4)
-+#define DEC_MODE_NFI 1
-+#define DEC_TNUM_S 0
-+#define DEC_TNUM_M GENMASK(2, 0)
-+
-+#define ECC_DECIDLE 0x10c
-+#define DEC_IDLE BIT(1)
-+
-+#define ECC_DECENUM 0x114
-+#define ERRNUM_S 2
-+#define ERRNUM_M GENMASK(3, 0)
-+
-+#define ECC_DECDONE 0x118
-+#define DEC_DONE7 BIT(7)
-+#define DEC_DONE6 BIT(6)
-+#define DEC_DONE5 BIT(5)
-+#define DEC_DONE4 BIT(4)
-+#define DEC_DONE3 BIT(3)
-+#define DEC_DONE2 BIT(2)
-+#define DEC_DONE1 BIT(1)
-+#define DEC_DONE0 BIT(0)
-+
-+#define ECC_DECEL(n) (0x11c + (n) * 4)
-+#define DEC_EL_ODD_S 16
-+#define DEC_EL_EVEN_S 0
-+#define DEC_EL_M 0x1fff
-+#define DEC_EL_BYTE_POS_S 3
-+#define DEC_EL_BIT_POS_M GENMASK(3, 0)
-+
-+#define ECC_FDMADDR 0x13c
-+
-+/* ENCIDLE and DECIDLE */
-+#define ECC_IDLE BIT(0)
-+
-+#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
-+ ((tpoecs) << ACCCON_POECS_S | (tprecs) << ACCCON_PRECS_S | \
-+ (tc2r) << ACCCON_C2R_S | (tw2r) << ACCCON_W2R_S | \
-+ (twh) << ACCCON_WH_S | (twst) << ACCCON_WST_S | (trlt))
-+
-+#define MASTER_STA_MASK (MAS_ADDR | MAS_RD | MAS_WR | \
-+ MAS_RDDLY)
-+#define NFI_RESET_TIMEOUT 1000000
-+#define NFI_CORE_TIMEOUT 500000
-+#define ECC_ENGINE_TIMEOUT 500000
-+
-+#define ECC_SECTOR_SIZE 512
-+#define ECC_PARITY_BITS 13
-+
-+#define NFI_FDM_SIZE 8
-+
-+#define MT7621_NFC_NAME "mt7621-nand"
-+
-+struct mt7621_nfc {
-+ struct nand_controller controller;
-+ struct nand_chip nand;
-+ struct clk *nfi_clk;
-+ struct device *dev;
-+
-+ void __iomem *nfi_regs;
-+ void __iomem *ecc_regs;
-+
-+ u32 spare_per_sector;
-+};
-+
-+static const u16 mt7621_nfi_page_size[] = { SZ_512, SZ_2K, SZ_4K };
-+static const u8 mt7621_nfi_spare_size[] = { 16, 26, 27, 28 };
-+static const u8 mt7621_ecc_strength[] = { 4, 6, 8, 10, 12 };
-+
-+static inline u32 nfi_read32(struct mt7621_nfc *nfc, u32 reg)
-+{
-+ return readl(nfc->nfi_regs + reg);
-+}
-+
-+static inline void nfi_write32(struct mt7621_nfc *nfc, u32 reg, u32 val)
-+{
-+ writel(val, nfc->nfi_regs + reg);
-+}
-+
-+static inline u16 nfi_read16(struct mt7621_nfc *nfc, u32 reg)
-+{
-+ return readw(nfc->nfi_regs + reg);
-+}
-+
-+static inline void nfi_write16(struct mt7621_nfc *nfc, u32 reg, u16 val)
-+{
-+ writew(val, nfc->nfi_regs + reg);
-+}
-+
-+static inline void ecc_write16(struct mt7621_nfc *nfc, u32 reg, u16 val)
-+{
-+ writew(val, nfc->ecc_regs + reg);
-+}
-+
-+static inline u32 ecc_read32(struct mt7621_nfc *nfc, u32 reg)
-+{
-+ return readl(nfc->ecc_regs + reg);
-+}
-+
-+static inline void ecc_write32(struct mt7621_nfc *nfc, u32 reg, u32 val)
-+{
-+ return writel(val, nfc->ecc_regs + reg);
-+}
-+
-+static inline u8 *oob_fdm_ptr(struct nand_chip *nand, int sect)
-+{
-+ return nand->oob_poi + sect * NFI_FDM_SIZE;
-+}
-+
-+static inline u8 *oob_ecc_ptr(struct mt7621_nfc *nfc, int sect)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+
-+ return nand->oob_poi + nand->ecc.steps * NFI_FDM_SIZE +
-+ sect * (nfc->spare_per_sector - NFI_FDM_SIZE);
-+}
-+
-+static inline u8 *page_data_ptr(struct nand_chip *nand, const u8 *buf,
-+ int sect)
-+{
-+ return (u8 *)buf + sect * nand->ecc.size;
-+}
-+
-+static int mt7621_ecc_wait_idle(struct mt7621_nfc *nfc, u32 reg)
-+{
-+ struct device *dev = nfc->dev;
-+ u32 val;
-+ int ret;
-+
-+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + reg, val,
-+ val & ECC_IDLE, 10,
-+ ECC_ENGINE_TIMEOUT);
-+ if (ret) {
-+ dev_warn(dev, "ECC engine timed out entering idle mode\n");
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_ecc_decoder_wait_done(struct mt7621_nfc *nfc, u32 sect)
-+{
-+ struct device *dev = nfc->dev;
-+ u32 val;
-+ int ret;
-+
-+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + ECC_DECDONE, val,
-+ val & (1 << sect), 10,
-+ ECC_ENGINE_TIMEOUT);
-+
-+ if (ret) {
-+ dev_warn(dev, "ECC decoder for sector %d timed out\n",
-+ sect);
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
-+
-+static void mt7621_ecc_encoder_op(struct mt7621_nfc *nfc, bool enable)
-+{
-+ mt7621_ecc_wait_idle(nfc, ECC_ENCIDLE);
-+ ecc_write16(nfc, ECC_ENCCON, enable ? ENC_EN : 0);
-+}
-+
-+static void mt7621_ecc_decoder_op(struct mt7621_nfc *nfc, bool enable)
-+{
-+ mt7621_ecc_wait_idle(nfc, ECC_DECIDLE);
-+ ecc_write16(nfc, ECC_DECCON, enable ? DEC_EN : 0);
-+}
-+
-+static int mt7621_ecc_correct_check(struct mt7621_nfc *nfc, u8 *sector_buf,
-+ u8 *fdm_buf, u32 sect)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ u32 decnum, num_error_bits, fdm_end_bits;
-+ u32 error_locations, error_bit_loc;
-+ u32 error_byte_pos, error_bit_pos;
-+ int bitflips = 0;
-+ u32 i;
-+
-+ decnum = ecc_read32(nfc, ECC_DECENUM);
-+ num_error_bits = (decnum >> (sect << ERRNUM_S)) & ERRNUM_M;
-+ fdm_end_bits = (nand->ecc.size + NFI_FDM_SIZE) << 3;
-+
-+ if (!num_error_bits)
-+ return 0;
-+
-+ if (num_error_bits == ERRNUM_M)
-+ return -1;
-+
-+ for (i = 0; i < num_error_bits; i++) {
-+ error_locations = ecc_read32(nfc, ECC_DECEL(i / 2));
-+ error_bit_loc = (error_locations >> ((i % 2) * DEC_EL_ODD_S)) &
-+ DEC_EL_M;
-+ error_byte_pos = error_bit_loc >> DEC_EL_BYTE_POS_S;
-+ error_bit_pos = error_bit_loc & DEC_EL_BIT_POS_M;
-+
-+ if (error_bit_loc < (nand->ecc.size << 3)) {
-+ if (sector_buf) {
-+ sector_buf[error_byte_pos] ^=
-+ (1 << error_bit_pos);
-+ }
-+ } else if (error_bit_loc < fdm_end_bits) {
-+ if (fdm_buf) {
-+ fdm_buf[error_byte_pos - nand->ecc.size] ^=
-+ (1 << error_bit_pos);
-+ }
-+ }
-+
-+ bitflips++;
-+ }
-+
-+ return bitflips;
-+}
-+
-+static int mt7621_nfc_wait_write_completion(struct mt7621_nfc *nfc,
-+ struct nand_chip *nand)
-+{
-+ struct device *dev = nfc->dev;
-+ u16 val;
-+ int ret;
-+
-+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_ADDRCNTR, val,
-+ ((val & SEC_CNTR_M) >> SEC_CNTR_S) >= nand->ecc.steps, 10,
-+ NFI_CORE_TIMEOUT);
-+
-+ if (ret) {
-+ dev_warn(dev, "NFI core write operation timed out\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ return ret;
-+}
-+
-+static void mt7621_nfc_hw_reset(struct mt7621_nfc *nfc)
-+{
-+ u32 val;
-+ int ret;
-+
-+ /* reset all registers and force the NFI master to terminate */
-+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST);
-+
-+ /* wait for the master to finish the last transaction */
-+ ret = readw_poll_timeout(nfc->nfi_regs + NFI_MASTER_STA, val,
-+ !(val & MASTER_STA_MASK), 50,
-+ NFI_RESET_TIMEOUT);
-+ if (ret) {
-+ dev_warn(nfc->dev, "Failed to reset NFI master in %dms\n",
-+ NFI_RESET_TIMEOUT);
-+ }
-+
-+ /* ensure any status register affected by the NFI master is reset */
-+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST);
-+ nfi_write16(nfc, NFI_STRDATA, 0);
-+}
-+
-+static inline void mt7621_nfc_hw_init(struct mt7621_nfc *nfc)
-+{
-+ u32 acccon;
-+
-+ /*
-+ * CNRNB: nand ready/busy register
-+ * -------------------------------
-+ * 7:4: timeout register for polling the NAND busy/ready signal
-+ * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles.
-+ */
-+ nfi_write16(nfc, NFI_CNRNB, CB2R_TIME_M | STR_CNRNB);
-+
-+ mt7621_nfc_hw_reset(nfc);
-+
-+ /* Apply default access timing */
-+ acccon = ACCTIMING(ACCCON_POECS_DEF, ACCCON_PRECS_DEF, ACCCON_C2R_DEF,
-+ ACCCON_W2R_DEF, ACCCON_WH_DEF, ACCCON_WST_DEF,
-+ ACCCON_RLT_DEF);
-+
-+ nfi_write32(nfc, NFI_ACCCON, acccon);
-+}
-+
-+static int mt7621_nfc_send_command(struct mt7621_nfc *nfc, u8 command)
-+{
-+ struct device *dev = nfc->dev;
-+ u32 val;
-+ int ret;
-+
-+ nfi_write32(nfc, NFI_CMD, command);
-+
-+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
-+ !(val & STA_CMD), 10,
-+ NFI_CORE_TIMEOUT);
-+ if (ret) {
-+ dev_warn(dev, "NFI core timed out entering command mode\n");
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_send_address_byte(struct mt7621_nfc *nfc, int addr)
-+{
-+ struct device *dev = nfc->dev;
-+ u32 val;
-+ int ret;
-+
-+ nfi_write32(nfc, NFI_COLADDR, addr);
-+ nfi_write32(nfc, NFI_ROWADDR, 0);
-+ nfi_write16(nfc, NFI_ADDRNOB, 1);
-+
-+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
-+ !(val & STA_ADDR), 10,
-+ NFI_CORE_TIMEOUT);
-+ if (ret) {
-+ dev_warn(dev, "NFI core timed out entering address mode\n");
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_send_address(struct mt7621_nfc *nfc, const u8 *addr,
-+ unsigned int naddrs)
-+{
-+ int ret;
-+
-+ while (naddrs) {
-+ ret = mt7621_nfc_send_address_byte(nfc, *addr);
-+ if (ret)
-+ return ret;
-+
-+ addr++;
-+ naddrs--;
-+ }
-+
-+ return 0;
-+}
-+
-+static void mt7621_nfc_wait_pio_ready(struct mt7621_nfc *nfc)
-+{
-+ struct device *dev = nfc->dev;
-+ int ret;
-+ u16 val;
-+
-+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_PIO_DIRDY, val,
-+ val & PIO_DIRDY, 10,
-+ NFI_CORE_TIMEOUT);
-+ if (ret < 0)
-+ dev_err(dev, "NFI core PIO mode not ready\n");
-+}
-+
-+static u32 mt7621_nfc_pio_read(struct mt7621_nfc *nfc, bool br)
-+{
-+ u32 reg;
-+
-+ /* after each byte read, the NFI_STA reg is reset by the hardware */
-+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S;
-+ if (reg != STA_FSM_CUSTOM_DATA) {
-+ reg = nfi_read16(nfc, NFI_CNFG);
-+ reg |= CNFG_READ_MODE | CNFG_BYTE_RW;
-+ if (!br)
-+ reg &= ~CNFG_BYTE_RW;
-+ nfi_write16(nfc, NFI_CNFG, reg);
-+
-+ /*
-+ * set to max sector to allow the HW to continue reading over
-+ * unaligned accesses
-+ */
-+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BRD);
-+
-+ /* trigger to fetch data */
-+ nfi_write16(nfc, NFI_STRDATA, STR_DATA);
-+ }
-+
-+ mt7621_nfc_wait_pio_ready(nfc);
-+
-+ return nfi_read32(nfc, NFI_DATAR);
-+}
-+
-+static void mt7621_nfc_read_data(struct mt7621_nfc *nfc, u8 *buf, u32 len)
-+{
-+ while (((uintptr_t)buf & 3) && len) {
-+ *buf = mt7621_nfc_pio_read(nfc, true);
-+ buf++;
-+ len--;
-+ }
-+
-+ while (len >= 4) {
-+ *(u32 *)buf = mt7621_nfc_pio_read(nfc, false);
-+ buf += 4;
-+ len -= 4;
-+ }
-+
-+ while (len) {
-+ *buf = mt7621_nfc_pio_read(nfc, true);
-+ buf++;
-+ len--;
-+ }
-+}
-+
-+static void mt7621_nfc_read_data_discard(struct mt7621_nfc *nfc, u32 len)
-+{
-+ while (len >= 4) {
-+ mt7621_nfc_pio_read(nfc, false);
-+ len -= 4;
-+ }
-+
-+ while (len) {
-+ mt7621_nfc_pio_read(nfc, true);
-+ len--;
-+ }
-+}
-+
-+static void mt7621_nfc_pio_write(struct mt7621_nfc *nfc, u32 val, bool bw)
-+{
-+ u32 reg;
-+
-+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S;
-+ if (reg != STA_FSM_CUSTOM_DATA) {
-+ reg = nfi_read16(nfc, NFI_CNFG);
-+ reg &= ~(CNFG_READ_MODE | CNFG_BYTE_RW);
-+ if (bw)
-+ reg |= CNFG_BYTE_RW;
-+ nfi_write16(nfc, NFI_CNFG, reg);
-+
-+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BWR);
-+ nfi_write16(nfc, NFI_STRDATA, STR_DATA);
-+ }
-+
-+ mt7621_nfc_wait_pio_ready(nfc);
-+ nfi_write32(nfc, NFI_DATAW, val);
-+}
-+
-+static void mt7621_nfc_write_data(struct mt7621_nfc *nfc, const u8 *buf,
-+ u32 len)
-+{
-+ while (((uintptr_t)buf & 3) && len) {
-+ mt7621_nfc_pio_write(nfc, *buf, true);
-+ buf++;
-+ len--;
-+ }
-+
-+ while (len >= 4) {
-+ mt7621_nfc_pio_write(nfc, *(const u32 *)buf, false);
-+ buf += 4;
-+ len -= 4;
-+ }
-+
-+ while (len) {
-+ mt7621_nfc_pio_write(nfc, *buf, true);
-+ buf++;
-+ len--;
-+ }
-+}
-+
-+static void mt7621_nfc_write_data_empty(struct mt7621_nfc *nfc, u32 len)
-+{
-+ while (len >= 4) {
-+ mt7621_nfc_pio_write(nfc, 0xffffffff, false);
-+ len -= 4;
-+ }
-+
-+ while (len) {
-+ mt7621_nfc_pio_write(nfc, 0xff, true);
-+ len--;
-+ }
-+}
-+
-+static int mt7621_nfc_dev_ready(struct mt7621_nfc *nfc,
-+ unsigned int timeout_ms)
-+{
-+ u32 val;
-+
-+ return readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
-+ !(val & STA_BUSY), 10,
-+ timeout_ms * 1000);
-+}
-+
-+static int mt7621_nfc_exec_instr(struct nand_chip *nand,
-+ const struct nand_op_instr *instr)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+
-+ switch (instr->type) {
-+ case NAND_OP_CMD_INSTR:
-+ mt7621_nfc_hw_reset(nfc);
-+ nfi_write16(nfc, NFI_CNFG, CNFG_OP_CUSTOM << CNFG_OP_MODE_S);
-+ return mt7621_nfc_send_command(nfc, instr->ctx.cmd.opcode);
-+ case NAND_OP_ADDR_INSTR:
-+ return mt7621_nfc_send_address(nfc, instr->ctx.addr.addrs,
-+ instr->ctx.addr.naddrs);
-+ case NAND_OP_DATA_IN_INSTR:
-+ mt7621_nfc_read_data(nfc, instr->ctx.data.buf.in,
-+ instr->ctx.data.len);
-+ return 0;
-+ case NAND_OP_DATA_OUT_INSTR:
-+ mt7621_nfc_write_data(nfc, instr->ctx.data.buf.out,
-+ instr->ctx.data.len);
-+ return 0;
-+ case NAND_OP_WAITRDY_INSTR:
-+ return mt7621_nfc_dev_ready(nfc,
-+ instr->ctx.waitrdy.timeout_ms);
-+ default:
-+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
-+ instr->type);
-+
-+ return -EINVAL;
-+ }
-+}
-+
-+static int mt7621_nfc_exec_op(struct nand_chip *nand,
-+ const struct nand_operation *op, bool check_only)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ int i, ret;
-+
-+ if (check_only)
-+ return 0;
-+
-+ /* Only CS0 available */
-+ nfi_write16(nfc, NFI_CSEL, 0);
-+
-+ for (i = 0; i < op->ninstrs; i++) {
-+ ret = mt7621_nfc_exec_instr(nand, &op->instrs[i]);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_setup_interface(struct nand_chip *nand, int csline,
-+ const struct nand_interface_config *conf)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ const struct nand_sdr_timings *timings;
-+ u32 acccon, temp, rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt;
-+
-+ if (!nfc->nfi_clk)
-+ return -ENOTSUPP;
-+
-+ timings = nand_get_sdr_timings(conf);
-+ if (IS_ERR(timings))
-+ return -ENOTSUPP;
-+
-+ rate = clk_get_rate(nfc->nfi_clk);
-+
-+ /* turn clock rate into KHZ */
-+ rate /= 1000;
-+
-+ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000;
-+ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000);
-+ tpoecs = min_t(u32, tpoecs, ACCCON_POECS_MAX);
-+
-+ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000;
-+ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000);
-+ tprecs = min_t(u32, tprecs, ACCCON_PRECS_MAX);
-+
-+ /* sdr interface has no tCR which means CE# low to RE# low */
-+ tc2r = 0;
-+
-+ tw2r = timings->tWHR_min / 1000;
-+ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000);
-+ tw2r = DIV_ROUND_UP(tw2r - 1, 2);
-+ tw2r = min_t(u32, tw2r, ACCCON_W2R_MAX);
-+
-+ twh = max(timings->tREH_min, timings->tWH_min) / 1000;
-+ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1;
-+ twh = min_t(u32, twh, ACCCON_WH_MAX);
-+
-+ /* Calculate real WE#/RE# hold time in nanosecond */
-+ temp = (twh + 1) * 1000000 / rate;
-+ /* nanosecond to picosecond */
-+ temp *= 1000;
-+
-+ /*
-+ * WE# low level time should be expaned to meet WE# pulse time
-+ * and WE# cycle time at the same time.
-+ */
-+ if (temp < timings->tWC_min)
-+ twst = timings->tWC_min - temp;
-+ else
-+ twst = 0;
-+ twst = max(timings->tWP_min, twst) / 1000;
-+ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1;
-+ twst = min_t(u32, twst, ACCCON_WST_MAX);
-+
-+ /*
-+ * RE# low level time should be expaned to meet RE# pulse time
-+ * and RE# cycle time at the same time.
-+ */
-+ if (temp < timings->tRC_min)
-+ trlt = timings->tRC_min - temp;
-+ else
-+ trlt = 0;
-+ trlt = max(trlt, timings->tRP_min) / 1000;
-+ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1;
-+ trlt = min_t(u32, trlt, ACCCON_RLT_MAX);
-+
-+ if (csline == NAND_DATA_IFACE_CHECK_ONLY) {
-+ if (twst < ACCCON_WST_MIN || trlt < ACCCON_RLT_MIN)
-+ return -ENOTSUPP;
-+ }
-+
-+ acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt);
-+
-+ dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon);
-+
-+ nfi_write32(nfc, NFI_ACCCON, acccon);
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_calc_ecc_strength(struct mt7621_nfc *nfc,
-+ u32 avail_ecc_bytes)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ u32 strength;
-+ int i;
-+
-+ strength = avail_ecc_bytes * 8 / ECC_PARITY_BITS;
-+
-+ /* Find the closest supported ecc strength */
-+ for (i = ARRAY_SIZE(mt7621_ecc_strength) - 1; i >= 0; i--) {
-+ if (mt7621_ecc_strength[i] <= strength)
-+ break;
-+ }
-+
-+ if (unlikely(i < 0)) {
-+ dev_err(nfc->dev, "OOB size (%u) is not supported\n",
-+ mtd->oobsize);
-+ return -EINVAL;
-+ }
-+
-+ nand->ecc.strength = mt7621_ecc_strength[i];
-+ nand->ecc.bytes =
-+ DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8);
-+
-+ dev_info(nfc->dev, "ECC strength adjusted to %u bits\n",
-+ nand->ecc.strength);
-+
-+ return i;
-+}
-+
-+static int mt7621_nfc_set_spare_per_sector(struct mt7621_nfc *nfc)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ u32 size;
-+ int i;
-+
-+ size = nand->ecc.bytes + NFI_FDM_SIZE;
-+
-+ /* Find the closest supported spare size */
-+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_spare_size); i++) {
-+ if (mt7621_nfi_spare_size[i] >= size)
-+ break;
-+ }
-+
-+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_spare_size))) {
-+ dev_err(nfc->dev, "OOB size (%u) is not supported\n",
-+ mtd->oobsize);
-+ return -EINVAL;
-+ }
-+
-+ nfc->spare_per_sector = mt7621_nfi_spare_size[i];
-+
-+ return i;
-+}
-+
-+static int mt7621_nfc_ecc_init(struct mt7621_nfc *nfc)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ u32 spare_per_sector, encode_block_size, decode_block_size;
-+ u32 ecc_enccfg, ecc_deccfg;
-+ int ecc_cap;
-+
-+ /* Only hardware ECC mode is supported */
-+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
-+ dev_err(nfc->dev, "Only hardware ECC mode is supported\n");
-+ return -EINVAL;
-+ }
-+
-+ nand->ecc.size = ECC_SECTOR_SIZE;
-+ nand->ecc.steps = mtd->writesize / nand->ecc.size;
-+
-+ spare_per_sector = mtd->oobsize / nand->ecc.steps;
-+
-+ ecc_cap = mt7621_nfc_calc_ecc_strength(nfc,
-+ spare_per_sector - NFI_FDM_SIZE);
-+ if (ecc_cap < 0)
-+ return ecc_cap;
-+
-+ /* Sector + FDM */
-+ encode_block_size = (nand->ecc.size + NFI_FDM_SIZE) * 8;
-+ ecc_enccfg = ecc_cap | (ENC_MODE_NFI << ENC_MODE_S) |
-+ (encode_block_size << ENC_CNFG_MSG_S);
-+
-+ /* Sector + FDM + ECC parity bits */
-+ decode_block_size = ((nand->ecc.size + NFI_FDM_SIZE) * 8) +
-+ nand->ecc.strength * ECC_PARITY_BITS;
-+ ecc_deccfg = ecc_cap | (DEC_MODE_NFI << DEC_MODE_S) |
-+ (decode_block_size << DEC_CS_S) |
-+ (DEC_CON_EL << DEC_CON_S) | DEC_EMPTY_EN;
-+
-+ mt7621_ecc_encoder_op(nfc, false);
-+ ecc_write32(nfc, ECC_ENCCNFG, ecc_enccfg);
-+
-+ mt7621_ecc_decoder_op(nfc, false);
-+ ecc_write32(nfc, ECC_DECCNFG, ecc_deccfg);
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_set_page_format(struct mt7621_nfc *nfc)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ int i, spare_size;
-+ u32 pagefmt;
-+
-+ spare_size = mt7621_nfc_set_spare_per_sector(nfc);
-+ if (spare_size < 0)
-+ return spare_size;
-+
-+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_page_size); i++) {
-+ if (mt7621_nfi_page_size[i] == mtd->writesize)
-+ break;
-+ }
-+
-+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_page_size))) {
-+ dev_err(nfc->dev, "Page size (%u) is not supported\n",
-+ mtd->writesize);
-+ return -EINVAL;
-+ }
-+
-+ pagefmt = i | (spare_size << PAGEFMT_SPARE_S) |
-+ (NFI_FDM_SIZE << PAGEFMT_FDM_S) |
-+ (NFI_FDM_SIZE << PAGEFMT_FDM_ECC_S);
-+
-+ nfi_write16(nfc, NFI_PAGEFMT, pagefmt);
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_attach_chip(struct nand_chip *nand)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ int ret;
-+
-+ if (nand->options & NAND_BUSWIDTH_16) {
-+ dev_err(nfc->dev, "16-bit buswidth is not supported");
-+ return -EINVAL;
-+ }
-+
-+ ret = mt7621_nfc_ecc_init(nfc);
-+ if (ret)
-+ return ret;
-+
-+ return mt7621_nfc_set_page_format(nfc);
-+}
-+
-+static const struct nand_controller_ops mt7621_nfc_controller_ops = {
-+ .attach_chip = mt7621_nfc_attach_chip,
-+ .exec_op = mt7621_nfc_exec_op,
-+ .setup_interface = mt7621_nfc_setup_interface,
-+};
-+
-+static int mt7621_nfc_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *oob_region)
-+{
-+ struct nand_chip *nand = mtd_to_nand(mtd);
-+
-+ if (section >= nand->ecc.steps)
-+ return -ERANGE;
-+
-+ oob_region->length = NFI_FDM_SIZE - 1;
-+ oob_region->offset = section * NFI_FDM_SIZE + 1;
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *oob_region)
-+{
-+ struct nand_chip *nand = mtd_to_nand(mtd);
-+
-+ if (section)
-+ return -ERANGE;
-+
-+ oob_region->offset = NFI_FDM_SIZE * nand->ecc.steps;
-+ oob_region->length = mtd->oobsize - oob_region->offset;
-+
-+ return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops mt7621_nfc_ooblayout_ops = {
-+ .free = mt7621_nfc_ooblayout_free,
-+ .ecc = mt7621_nfc_ooblayout_ecc,
-+};
-+
-+static void mt7621_nfc_write_fdm(struct mt7621_nfc *nfc)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ u32 vall, valm;
-+ u8 *oobptr;
-+ int i, j;
-+
-+ for (i = 0; i < nand->ecc.steps; i++) {
-+ vall = 0;
-+ valm = 0;
-+ oobptr = oob_fdm_ptr(nand, i);
-+
-+ for (j = 0; j < 4; j++)
-+ vall |= (u32)oobptr[j] << (j * 8);
-+
-+ for (j = 0; j < 4; j++)
-+ valm |= (u32)oobptr[j + 4] << ((j - 4) * 8);
-+
-+ nfi_write32(nfc, NFI_FDML(i), vall);
-+ nfi_write32(nfc, NFI_FDMM(i), valm);
-+ }
-+}
-+
-+static void mt7621_nfc_read_sector_fdm(struct mt7621_nfc *nfc, u32 sect)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ u32 vall, valm;
-+ u8 *oobptr;
-+ int i;
-+
-+ vall = nfi_read32(nfc, NFI_FDML(sect));
-+ valm = nfi_read32(nfc, NFI_FDMM(sect));
-+ oobptr = oob_fdm_ptr(nand, sect);
-+
-+ for (i = 0; i < 4; i++)
-+ oobptr[i] = (vall >> (i * 8)) & 0xff;
-+
-+ for (i = 0; i < 4; i++)
-+ oobptr[i + 4] = (valm >> (i * 8)) & 0xff;
-+}
-+
-+static int mt7621_nfc_read_page_hwecc(struct nand_chip *nand, uint8_t *buf,
-+ int oob_required, int page)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ int bitflips = 0;
-+ int rc, i;
-+
-+ nand_read_page_op(nand, page, 0, NULL, 0);
-+
-+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
-+ CNFG_READ_MODE | CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
-+
-+ mt7621_ecc_decoder_op(nfc, true);
-+
-+ nfi_write16(nfc, NFI_CON,
-+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S));
-+
-+ for (i = 0; i < nand->ecc.steps; i++) {
-+ if (buf)
-+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i),
-+ nand->ecc.size);
-+ else
-+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size);
-+
-+ rc = mt7621_ecc_decoder_wait_done(nfc, i);
-+
-+ mt7621_nfc_read_sector_fdm(nfc, i);
-+
-+ if (rc < 0) {
-+ bitflips = -EIO;
-+ continue;
-+ }
-+
-+ rc = mt7621_ecc_correct_check(nfc,
-+ buf ? page_data_ptr(nand, buf, i) : NULL,
-+ oob_fdm_ptr(nand, i), i);
-+
-+ if (rc < 0) {
-+ dev_warn(nfc->dev,
-+ "Uncorrectable ECC error at page %d.%d\n",
-+ page, i);
-+ bitflips = -EBADMSG;
-+ mtd->ecc_stats.failed++;
-+ } else if (bitflips >= 0) {
-+ bitflips += rc;
-+ mtd->ecc_stats.corrected += rc;
-+ }
-+ }
-+
-+ mt7621_ecc_decoder_op(nfc, false);
-+
-+ nfi_write16(nfc, NFI_CON, 0);
-+
-+ return bitflips;
-+}
-+
-+static int mt7621_nfc_read_page_raw(struct nand_chip *nand, uint8_t *buf,
-+ int oob_required, int page)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ int i;
-+
-+ nand_read_page_op(nand, page, 0, NULL, 0);
-+
-+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
-+ CNFG_READ_MODE);
-+
-+ nfi_write16(nfc, NFI_CON,
-+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S));
-+
-+ for (i = 0; i < nand->ecc.steps; i++) {
-+ /* Read data */
-+ if (buf)
-+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i),
-+ nand->ecc.size);
-+ else
-+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size);
-+
-+ /* Read FDM */
-+ mt7621_nfc_read_data(nfc, oob_fdm_ptr(nand, i), NFI_FDM_SIZE);
-+
-+ /* Read ECC parity data */
-+ mt7621_nfc_read_data(nfc, oob_ecc_ptr(nfc, i),
-+ nfc->spare_per_sector - NFI_FDM_SIZE);
-+ }
-+
-+ nfi_write16(nfc, NFI_CON, 0);
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_read_oob_hwecc(struct nand_chip *nand, int page)
-+{
-+ return mt7621_nfc_read_page_hwecc(nand, NULL, 1, page);
-+}
-+
-+static int mt7621_nfc_read_oob_raw(struct nand_chip *nand, int page)
-+{
-+ return mt7621_nfc_read_page_raw(nand, NULL, 1, page);
-+}
-+
-+static int mt7621_nfc_check_empty_page(struct nand_chip *nand, const u8 *buf)
-+{
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+ uint32_t i, j;
-+ u8 *oobptr;
-+
-+ if (buf) {
-+ for (i = 0; i < mtd->writesize; i++)
-+ if (buf[i] != 0xff)
-+ return 0;
-+ }
-+
-+ for (i = 0; i < nand->ecc.steps; i++) {
-+ oobptr = oob_fdm_ptr(nand, i);
-+ for (j = 0; j < NFI_FDM_SIZE; j++)
-+ if (oobptr[j] != 0xff)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int mt7621_nfc_write_page_hwecc(struct nand_chip *nand,
-+ const uint8_t *buf, int oob_required,
-+ int page)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+
-+ if (mt7621_nfc_check_empty_page(nand, buf)) {
-+ /*
-+ * MT7621 ECC engine always generates parity code for input
-+ * pages, even for empty pages. Doing so will write back ECC
-+ * parity code to the oob region, which means such pages will
-+ * no longer be empty pages.
-+ *
-+ * To avoid this, stop write operation if current page is an
-+ * empty page.
-+ */
-+ return 0;
-+ }
-+
-+ nand_prog_page_begin_op(nand, page, 0, NULL, 0);
-+
-+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
-+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
-+
-+ mt7621_ecc_encoder_op(nfc, true);
-+
-+ mt7621_nfc_write_fdm(nfc);
-+
-+ nfi_write16(nfc, NFI_CON,
-+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S));
-+
-+ if (buf)
-+ mt7621_nfc_write_data(nfc, buf, mtd->writesize);
-+ else
-+ mt7621_nfc_write_data_empty(nfc, mtd->writesize);
-+
-+ mt7621_nfc_wait_write_completion(nfc, nand);
-+
-+ mt7621_ecc_encoder_op(nfc, false);
-+
-+ nfi_write16(nfc, NFI_CON, 0);
-+
-+ return nand_prog_page_end_op(nand);
-+}
-+
-+static int mt7621_nfc_write_page_raw(struct nand_chip *nand,
-+ const uint8_t *buf, int oob_required,
-+ int page)
-+{
-+ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
-+ int i;
-+
-+ nand_prog_page_begin_op(nand, page, 0, NULL, 0);
-+
-+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S));
-+
-+ nfi_write16(nfc, NFI_CON,
-+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S));
-+
-+ for (i = 0; i < nand->ecc.steps; i++) {
-+ /* Write data */
-+ if (buf)
-+ mt7621_nfc_write_data(nfc, page_data_ptr(nand, buf, i),
-+ nand->ecc.size);
-+ else
-+ mt7621_nfc_write_data_empty(nfc, nand->ecc.size);
-+
-+ /* Write FDM */
-+ mt7621_nfc_write_data(nfc, oob_fdm_ptr(nand, i),
-+ NFI_FDM_SIZE);
-+
-+ /* Write dummy ECC parity data */
-+ mt7621_nfc_write_data_empty(nfc, nfc->spare_per_sector -
-+ NFI_FDM_SIZE);
-+ }
-+
-+ mt7621_nfc_wait_write_completion(nfc, nand);
-+
-+ nfi_write16(nfc, NFI_CON, 0);
-+
-+ return nand_prog_page_end_op(nand);
-+}
-+
-+static int mt7621_nfc_write_oob_hwecc(struct nand_chip *nand, int page)
-+{
-+ return mt7621_nfc_write_page_hwecc(nand, NULL, 1, page);
-+}
-+
-+static int mt7621_nfc_write_oob_raw(struct nand_chip *nand, int page)
-+{
-+ return mt7621_nfc_write_page_raw(nand, NULL, 1, page);
-+}
-+
-+static int mt7621_nfc_init_chip(struct mt7621_nfc *nfc)
-+{
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd;
-+ int ret;
-+
-+ nand->controller = &nfc->controller;
-+ nand_set_controller_data(nand, (void *)nfc);
-+ nand_set_flash_node(nand, nfc->dev->of_node);
-+
-+ nand->options |= NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE;
-+ if (!nfc->nfi_clk)
-+ nand->options |= NAND_KEEP_TIMINGS;
-+
-+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-+ nand->ecc.read_page = mt7621_nfc_read_page_hwecc;
-+ nand->ecc.read_page_raw = mt7621_nfc_read_page_raw;
-+ nand->ecc.write_page = mt7621_nfc_write_page_hwecc;
-+ nand->ecc.write_page_raw = mt7621_nfc_write_page_raw;
-+ nand->ecc.read_oob = mt7621_nfc_read_oob_hwecc;
-+ nand->ecc.read_oob_raw = mt7621_nfc_read_oob_raw;
-+ nand->ecc.write_oob = mt7621_nfc_write_oob_hwecc;
-+ nand->ecc.write_oob_raw = mt7621_nfc_write_oob_raw;
-+
-+ mtd = nand_to_mtd(nand);
-+ mtd->owner = THIS_MODULE;
-+ mtd->dev.parent = nfc->dev;
-+ mtd->name = MT7621_NFC_NAME;
-+ mtd_set_ooblayout(mtd, &mt7621_nfc_ooblayout_ops);
-+
-+ mt7621_nfc_hw_init(nfc);
-+
-+ ret = nand_scan(nand, 1);
-+ if (ret)
-+ return ret;
-+
-+ ret = mtd_device_register(mtd, NULL, 0);
-+ if (ret) {
-+ dev_err(nfc->dev, "Failed to register MTD: %d\n", ret);
-+ nand_cleanup(nand);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_nfc_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct mt7621_nfc *nfc;
-+ struct resource *res;
-+ int ret;
-+
-+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
-+ if (!nfc)
-+ return -ENOMEM;
-+
-+ nand_controller_init(&nfc->controller);
-+ nfc->controller.ops = &mt7621_nfc_controller_ops;
-+ nfc->dev = dev;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nfi");
-+ nfc->nfi_regs = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(nfc->nfi_regs)) {
-+ ret = PTR_ERR(nfc->nfi_regs);
-+ return ret;
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecc");
-+ nfc->ecc_regs = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(nfc->ecc_regs)) {
-+ ret = PTR_ERR(nfc->ecc_regs);
-+ return ret;
-+ }
-+
-+ nfc->nfi_clk = devm_clk_get(dev, "nfi_clk");
-+ if (IS_ERR(nfc->nfi_clk)) {
-+ dev_warn(dev, "nfi clk not provided\n");
-+ nfc->nfi_clk = NULL;
-+ } else {
-+ ret = clk_prepare_enable(nfc->nfi_clk);
-+ if (ret) {
-+ dev_err(dev, "Failed to enable nfi core clock\n");
-+ return ret;
-+ }
-+ }
-+
-+ platform_set_drvdata(pdev, nfc);
-+
-+ ret = mt7621_nfc_init_chip(nfc);
-+ if (ret) {
-+ dev_err(dev, "Failed to initialize nand chip\n");
-+ goto clk_disable;
-+ }
-+
-+ return 0;
-+
-+clk_disable:
-+ clk_disable_unprepare(nfc->nfi_clk);
-+
-+ return ret;
-+}
-+
-+static int mt7621_nfc_remove(struct platform_device *pdev)
-+{
-+ struct mt7621_nfc *nfc = platform_get_drvdata(pdev);
-+ struct nand_chip *nand = &nfc->nand;
-+ struct mtd_info *mtd = nand_to_mtd(nand);
-+
-+ mtd_device_unregister(mtd);
-+ nand_cleanup(nand);
-+ clk_disable_unprepare(nfc->nfi_clk);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_nfc_id_table[] = {
-+ { .compatible = "mediatek,mt7621-nfc" },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, match);
-+
-+static struct platform_driver mt7621_nfc_driver = {
-+ .probe = mt7621_nfc_probe,
-+ .remove = mt7621_nfc_remove,
-+ .driver = {
-+ .name = MT7621_NFC_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7621_nfc_id_table,
-+ },
-+};
-+module_platform_driver(mt7621_nfc_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Weijie Gao <weijie.gao@mediatek.com>");
-+MODULE_DESCRIPTION("MediaTek MT7621 NAND Flash Controller driver");
+++ /dev/null
-From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 1 Apr 2020 02:07:59 +0800
-Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver
-
-This patch adds documentation for MediaTek MT7621 NAND flash controller
-driver.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
-@@ -0,0 +1,68 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding
-+
-+maintainers:
-+ - Weijie Gao <weijie.gao@mediatek.com>
-+
-+description: |
-+ This driver uses a single node to describe both NAND Flash controller
-+ interface (NFI) and ECC engine for MT7621 SoC.
-+ MT7621 supports only one chip select.
-+
-+properties:
-+ "#address-cells": false
-+ "#size-cells": false
-+
-+ compatible:
-+ enum:
-+ - mediatek,mt7621-nfc
-+
-+ reg:
-+ items:
-+ - description: Register base of NFI core
-+ - description: Register base of ECC engine
-+
-+ reg-names:
-+ items:
-+ - const: nfi
-+ - const: ecc
-+
-+ clocks:
-+ items:
-+ - description: Source clock for NFI core, fixed 125MHz
-+
-+ clock-names:
-+ items:
-+ - const: nfi_clk
-+
-+required:
-+ - compatible
-+ - reg
-+ - reg-names
-+ - clocks
-+ - clock-names
-+
-+examples:
-+ - |
-+ nficlock: nficlock {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+
-+ clock-frequency = <125000000>;
-+ };
-+
-+ nand@1e003000 {
-+ compatible = "mediatek,mt7621-nfc";
-+
-+ reg = <0x1e003000 0x800
-+ 0x1e003800 0x800>;
-+ reg-names = "nfi", "ecc";
-+
-+ clocks = <&nficlock>;
-+ clock-names = "nfi_clk";
-+ };
+++ /dev/null
---- a/drivers/mtd/spi-nor/gigadevice.c
-+++ b/drivers/mtd/spi-nor/gigadevice.c
-@@ -53,6 +53,9 @@ static const struct flash_info gigadevic
- SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
- SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
- .fixups = &gd25q256_fixups },
-+ { "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) },
- };
-
- const struct spi_nor_manufacturer spi_nor_gigadevice = {
+++ /dev/null
-From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
-Date: Fri, 21 Jun 2019 10:04:05 +0200
-Subject: [PATCH] net: ethernet: mediatek: support net-labels
-
-With this patch, device name can be set within dts file in the same way as dsa
-port can.
-Add: label = "wan"; to GMAC node.
-
-Signed-off-by: René van Dorst <opensource@vdorst.com>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2901,6 +2901,7 @@ static const struct net_device_ops mtk_n
-
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
- {
-+ const char *name = of_get_property(np, "label", NULL);
- const __be32 *_id = of_get_property(np, "reg", NULL);
- phy_interface_t phy_mode;
- struct phylink *phylink;
-@@ -2993,6 +2994,9 @@ static int mtk_add_mac(struct mtk_eth *e
-
- eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
-
-+ if (name)
-+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
-+
- return 0;
-
- free_netdev:
+++ /dev/null
-From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
-Date: Fri, 13 Nov 2020 16:11:32 +0100
-Subject: [PATCH] net: phy: at803x: add support for SFP module in
- RGMII-to-x-base mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: René van Dorst <opensource@vdorst.com>
----
- drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 91 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -20,6 +20,8 @@
- #include <linux/regulator/driver.h>
- #include <linux/regulator/consumer.h>
- #include <dt-bindings/net/qca-ar803x.h>
-+#include <linux/sfp.h>
-+#include <linux/phylink.h>
-
- #define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10
- #define AT803X_SFC_ASSERT_CRS BIT(11)
-@@ -83,9 +85,18 @@
-
- #define AT803X_MODE_CFG_MASK 0x0F
- #define AT803X_MODE_CFG_SGMII 0x01
-+#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02
-+#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03
-+#define AT803X_MODE_FIBER 0x01
-+#define AT803X_MODE_COPPER 0x00
-
- #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE 0x0200
-+#define PSSR_LINK BIT(10)
-+#define PSSR_SYNC_STATUS BIT(8)
-+#define PSSR_DUPLEX BIT(13)
-+#define PSSR_SPEED_1000 BIT(15)
-+#define PSSR_SPEED_100 BIT(14)
-
- #define AT803X_DEBUG_REG_0 0x00
- #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
-@@ -505,10 +516,72 @@ static int at803x_parse_dt(struct phy_de
- return 0;
- }
-
-+static int at803x_mode(struct phy_device *phydev)
-+{
-+ int mode;
-+
-+ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK;
-+
-+ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 ||
-+ mode == AT803X_MODE_CFG_BX1000_RGMII_75)
-+ return AT803X_MODE_FIBER;
-+ return AT803X_MODE_COPPER;
-+}
-+
-+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, };
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ struct phy_device *phydev = upstream;
-+ phy_interface_t iface;
-+
-+ phylink_set(at803x_support, 1000baseX_Full);
-+ /* AT803x only support 1000baseX but SGMII works fine when module runs
-+ * at 1Gbit.
-+ */
-+ phylink_set(at803x_support, 1000baseT_Full);
-+
-+ sfp_parse_support(phydev->sfp_bus, id, support);
-+
-+ // Limit to interfaces that both sides support
-+ linkmode_and(support, support, at803x_support);
-+
-+ if (linkmode_empty(support))
-+ goto unsupported_mode;
-+
-+ iface = sfp_select_interface(phydev->sfp_bus, support);
-+
-+ if (iface != PHY_INTERFACE_MODE_SGMII &&
-+ iface != PHY_INTERFACE_MODE_1000BASEX)
-+ goto unsupported_mode;
-+
-+ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
-+
-+ return 0;
-+
-+unsupported_mode:
-+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
-+ "Only SGMII at 1Gbit/1000BASEX are supported!\n");
-+ return -EINVAL;
-+}
-+
-+static const struct sfp_upstream_ops at803x_sfp_ops = {
-+ .attach = phy_sfp_attach,
-+ .detach = phy_sfp_detach,
-+ .module_insert = at803x_sfp_insert,
-+};
-+
- static int at803x_probe(struct phy_device *phydev)
- {
- struct device *dev = &phydev->mdio.dev;
- struct at803x_priv *priv;
-+ int ret;
-+
-+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
-+ ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
-+ if (ret < 0)
-+ return ret;
-+ }
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
-@@ -709,6 +782,10 @@ static int at803x_read_status(struct phy
- {
- int ss, err, old_link = phydev->link;
-
-+ /* Handle (Fiber) SGMII to RGMII mode */
-+ if (at803x_mode(phydev) == AT803X_MODE_FIBER)
-+ return genphy_c37_read_status(phydev);
-+
- /* Update the link, but return if there was an error */
- err = genphy_update_link(phydev);
- if (err)
-@@ -809,6 +886,12 @@ static int at803x_config_aneg(struct phy
- {
- int ret;
-
-+ /* Handle (Fiber) SerDes to RGMII mode */
-+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
-+ pr_warn("%s: fiber\n", __func__);
-+ return genphy_c37_config_aneg(phydev);
-+ }
-+
- ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
- if (ret < 0)
- return ret;
-@@ -1120,6 +1203,7 @@ static struct phy_driver at803x_driver[]
- .suspend = at803x_suspend,
- .resume = at803x_resume,
- /* PHY_GBIT_FEATURES */
-+ .config_aneg = at803x_config_aneg,
- .read_status = at803x_read_status,
- .aneg_done = at803x_aneg_done,
- .ack_interrupt = &at803x_ack_interrupt,
+++ /dev/null
-From ffbb1b37a3e1ce1a5c574a6bd4f5aede8bc468ac Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Sat, 27 Feb 2021 20:20:07 -0800
-Subject: [PATCH] Revert "net: phy: simplify phy_link_change arguments"
-
-This reverts commit a307593a644443db12888f45eed0dafb5869e2cc.
-
-This brings back the do_carrier flags used by the (hacky) next patch,
-still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c
----
- drivers/net/phy/phy.c | 12 ++++++------
- drivers/net/phy/phy_device.c | 12 +++++++-----
- drivers/net/phy/phylink.c | 3 ++-
- include/linux/phy.h | 2 +-
- 4 files changed, 16 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -58,13 +58,13 @@ static const char *phy_state_to_str(enum
-
- static void phy_link_up(struct phy_device *phydev)
- {
-- phydev->phy_link_change(phydev, true);
-+ phydev->phy_link_change(phydev, true, true);
- phy_led_trigger_change_speed(phydev);
- }
-
--static void phy_link_down(struct phy_device *phydev)
-+static void phy_link_down(struct phy_device *phydev, bool do_carrier)
- {
-- phydev->phy_link_change(phydev, false);
-+ phydev->phy_link_change(phydev, false, do_carrier);
- phy_led_trigger_change_speed(phydev);
- }
-
-@@ -616,7 +616,7 @@ int phy_start_cable_test(struct phy_devi
- goto out;
-
- /* Mark the carrier down until the test is complete */
-- phy_link_down(phydev);
-+ phy_link_down(phydev, true);
-
- netif_testing_on(dev);
- err = phydev->drv->cable_test_start(phydev);
-@@ -687,7 +687,7 @@ int phy_start_cable_test_tdr(struct phy_
- goto out;
-
- /* Mark the carrier down until the test is complete */
-- phy_link_down(phydev);
-+ phy_link_down(phydev, true);
-
- netif_testing_on(dev);
- err = phydev->drv->cable_test_tdr_start(phydev, config);
-@@ -758,7 +758,7 @@ static int phy_check_link_status(struct
- phy_link_up(phydev);
- } else if (!phydev->link && phydev->state != PHY_NOLINK) {
- phydev->state = PHY_NOLINK;
-- phy_link_down(phydev);
-+ phy_link_down(phydev, true);
- }
-
- return 0;
-@@ -1162,7 +1162,7 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- phy_link_down(phydev);
-+ phy_link_down(phydev, true);
- }
- do_suspend = true;
- break;
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -937,14 +937,16 @@ struct phy_device *phy_find_first(struct
- }
- EXPORT_SYMBOL(phy_find_first);
-
--static void phy_link_change(struct phy_device *phydev, bool up)
-+static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
- {
- struct net_device *netdev = phydev->attached_dev;
-
-- if (up)
-- netif_carrier_on(netdev);
-- else
-- netif_carrier_off(netdev);
-+ if (do_carrier) {
-+ if (up)
-+ netif_carrier_on(netdev);
-+ else
-+ netif_carrier_off(netdev);
-+ }
- phydev->adjust_link(netdev);
- if (phydev->mii_ts && phydev->mii_ts->link_state)
- phydev->mii_ts->link_state(phydev->mii_ts, phydev);
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -907,7 +907,8 @@ void phylink_destroy(struct phylink *pl)
- }
- EXPORT_SYMBOL_GPL(phylink_destroy);
-
--static void phylink_phy_change(struct phy_device *phydev, bool up)
-+static void phylink_phy_change(struct phy_device *phydev, bool up,
-+ bool do_carrier)
- {
- struct phylink *pl = phydev->phylink;
- bool tx_pause, rx_pause;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -636,7 +636,7 @@ struct phy_device {
- u8 mdix;
- u8 mdix_ctrl;
-
-- void (*phy_link_change)(struct phy_device *phydev, bool up);
-+ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
- void (*adjust_link)(struct net_device *dev);
-
- #if IS_ENABLED(CONFIG_MACSEC)
+++ /dev/null
-From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 34/53] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -758,7 +758,10 @@ static int phy_check_link_status(struct
- phy_link_up(phydev);
- } else if (!phydev->link && phydev->state != PHY_NOLINK) {
- phydev->state = PHY_NOLINK;
-- phy_link_down(phydev, true);
-+ if (!phydev->no_auto_carrier_off)
-+ phy_link_down(phydev, true);
-+ else
-+ phy_link_down(phydev, false);
- }
-
- return 0;
-@@ -1162,7 +1165,10 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- phy_link_down(phydev, true);
-+ if (!phydev->no_auto_carrier_off)
-+ phy_link_down(phydev, true);
-+ else
-+ phy_link_down(phydev, false);
- }
- do_suspend = true;
- break;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -556,6 +556,7 @@ struct phy_device {
- unsigned sysfs_links:1;
- unsigned loopback_enabled:1;
- unsigned downshifted_rate:1;
-+ unsigned no_auto_carrier_off:1;
-
- unsigned autoneg:1;
- /* The most recently read link state */
+++ /dev/null
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -19,6 +19,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
- #include "gpiolib-of.h"
-@@ -1039,3 +1041,68 @@ void of_gpiochip_remove(struct gpio_chip
- {
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+ if (!gpio_is_valid(gpio))
-+ return gpio;
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+ .probe = of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -564,7 +564,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -626,6 +626,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -647,6 +649,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -713,6 +713,7 @@ static inline void devm_acpi_dev_remove_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -720,6 +721,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
+++ /dev/null
-From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+ - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+ - first cell is the pin number
-+ - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+ SoC type. Register offsets need to be in this order.
-+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+
-+ reg = <0x600 0x34>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ };
+++ /dev/null
-From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 20:36:29 +0200
-Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
-
-Add gpio driver for Ralink SoC. This driver makes the gpio core on
-RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
- 4 files changed, 386 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
- create mode 100644 drivers/gpio/gpio-ralink.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
-@@ -0,0 +1,24 @@
-+/*
-+ * Ralink SoC GPIO API support
-+ *
-+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MACH_RALINK_GPIO_H
-+#define __ASM_MACH_RALINK_GPIO_H
-+
-+#define ARCH_NR_GPIOS 128
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value __gpio_get_value
-+#define gpio_set_value __gpio_set_value
-+#define gpio_cansleep __gpio_cansleep
-+#define gpio_to_irq __gpio_to_irq
-+
-+#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -535,6 +535,12 @@ config GPIO_SNPS_CREG
- where only several fields in register belong to GPIO lines and
- each GPIO line owns a field with different length and on/off value.
-
-+config GPIO_RALINK
-+ bool "Ralink GPIO Support"
-+ depends on RALINK
-+ help
-+ Say yes here to support the Ralink SoC GPIO device
-+
- config GPIO_SPEAR_SPICS
- bool "ST SPEAr13xx SPI Chip Select as GPIO support"
- depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -119,6 +119,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
- obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
- obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
-+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,341 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+
-+enum ralink_gpio_reg {
-+ GPIO_REG_INT = 0,
-+ GPIO_REG_EDGE,
-+ GPIO_REG_RENA,
-+ GPIO_REG_FENA,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DIR,
-+ GPIO_REG_POL,
-+ GPIO_REG_SET,
-+ GPIO_REG_RESET,
-+ GPIO_REG_TOGGLE,
-+ GPIO_REG_MAX
-+};
-+
-+struct ralink_gpio_chip {
-+ struct gpio_chip chip;
-+ u8 regs[GPIO_REG_MAX];
-+
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ struct irq_domain *domain;
-+ int irq;
-+
-+ u32 rising;
-+ u32 falling;
-+};
-+
-+#define MAP_MAX 4
-+static struct irq_domain *irq_map[MAP_MAX];
-+static int irq_map_count;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
-+{
-+ struct ralink_gpio_chip *rg;
-+
-+ rg = container_of(chip, struct ralink_gpio_chip, chip);
-+
-+ return rg;
-+}
-+
-+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, rg->membase + rg->regs[reg]);
-+}
-+
-+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
-+{
-+ return ioread32(rg->membase + rg->regs[reg]);
-+}
-+
-+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
-+}
-+
-+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t &= ~BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ ralink_gpio_set(chip, offset, value);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t |= BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ if (rg->irq < 1)
-+ return -1;
-+
-+ return irq_create_mapping(rg->domain, pin);
-+}
-+
-+static void ralink_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < irq_map_count; i++) {
-+ struct irq_domain *domain = irq_map[i];
-+ struct ralink_gpio_chip *rg;
-+ unsigned long pending;
-+ int bit;
-+
-+ rg = (struct ralink_gpio_chip *) domain->host_data;
-+ pending = rt_gpio_r32(rg, GPIO_REG_INT);
-+
-+ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
-+ u32 map = irq_find_mapping(domain, bit);
-+ generic_handle_irq(map);
-+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void ralink_gpio_irq_unmask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void ralink_gpio_irq_mask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ struct ralink_gpio_chip *rg;
-+ u32 mask = BIT(d->hwirq);
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip ralink_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = ralink_gpio_irq_unmask,
-+ .irq_mask = ralink_gpio_irq_mask,
-+ .irq_mask_ack = ralink_gpio_irq_mask,
-+ .irq_set_type = ralink_gpio_irq_type,
-+};
-+
-+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = gpio_map,
-+};
-+
-+static void ralink_gpio_irq_init(struct device_node *np,
-+ struct ralink_gpio_chip *rg)
-+{
-+ if (irq_map_count >= MAP_MAX)
-+ return;
-+
-+ rg->irq = irq_of_parse_and_map(np, 0);
-+ if (!rg->irq)
-+ return;
-+
-+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
-+ &irq_domain_ops, rg);
-+ if (!rg->domain) {
-+ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
-+ return;
-+ }
-+
-+ irq_map[irq_map_count++] = rg->domain;
-+
-+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
-+
-+ if (!atomic_read(&irq_refcount))
-+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
-+ atomic_inc(&irq_refcount);
-+
-+ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
-+}
-+
-+static int ralink_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct ralink_gpio_chip *rg;
-+ const __be32 *ngpio, *gpiobase;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to find resource\n");
-+ return -ENOMEM;
-+ }
-+
-+ rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+ if (!rg)
-+ return -ENOMEM;
-+
-+ rg->membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (!rg->membase) {
-+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (of_property_read_u8_array(np, "ralink,register-map",
-+ rg->regs, GPIO_REG_MAX)) {
-+ dev_err(&pdev->dev, "failed to read register definition\n");
-+ return -EINVAL;
-+ }
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ if (!ngpio) {
-+ dev_err(&pdev->dev, "failed to read number of pins\n");
-+ return -EINVAL;
-+ }
-+
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (gpiobase)
-+ rg->chip.base = be32_to_cpu(*gpiobase);
-+ else
-+ rg->chip.base = -1;
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.parent = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
-+ rg->chip.ngpio = be32_to_cpu(*ngpio);
-+ rg->chip.direction_input = ralink_gpio_direction_input;
-+ rg->chip.direction_output = ralink_gpio_direction_output;
-+ rg->chip.get = ralink_gpio_get;
-+ rg->chip.set = ralink_gpio_set;
-+ rg->chip.request = gpiochip_generic_request;
-+ rg->chip.to_irq = ralink_gpio_to_irq;
-+ rg->chip.free = gpiochip_generic_free;
-+
-+ /* set polarity to low for all lines */
-+ rt_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ ralink_gpio_irq_init(np, rg);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static const struct of_device_id ralink_gpio_match[] = {
-+ { .compatible = "ralink,rt2880-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
-+
-+static struct platform_driver ralink_gpio_driver = {
-+ .probe = ralink_gpio_probe,
-+ .driver = {
-+ .name = "rt2880_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_gpio_match,
-+ },
-+};
-+
-+static int __init ralink_gpio_init(void)
-+{
-+ return platform_driver_register(&ralink_gpio_driver);
-+}
-+
-+subsys_initcall(ralink_gpio_init);
+++ /dev/null
-From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001
-From: Daniel Santos <daniel.santos@pobox.com>
-Date: Sun, 4 Nov 2018 20:24:32 -0600
-Subject: gpio-ralink: Add support for GPIO as interrupt-controller
-
-Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
----
- Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++
- drivers/gpio/gpio-ralink.c | 2 +-
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -17,6 +17,9 @@ Required properties:
-
- Optional properties:
- - ralink,gpio-base : Specify the GPIO chips base number
-+- interrupt-controller : marks this as an interrupt controller
-+- #interrupt-cells : a standard two-cell interrupt flag, see
-+ interrupt-controller/interrupts.txt
-
- Example:
-
-@@ -28,6 +31,9 @@ Example:
-
- reg = <0x600 0x34>;
-
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
- interrupt-parent = <&intc>;
- interrupts = <6>;
-
---- a/drivers/gpio/gpio-ralink.c
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d
- }
-
- static const struct irq_domain_ops irq_domain_ops = {
-- .xlate = irq_domain_xlate_onecell,
-+ .xlate = irq_domain_xlate_twocell,
- .map = gpio_map,
- };
-
+++ /dev/null
-From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/media/usb/uvc/uvc_driver.c | 12 +++
- drivers/media/usb/uvc/uvc_status.c | 2 +
- drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h | 5 +-
- 4 files changed, 165 insertions(+), 1 deletion(-)
-
---- a/drivers/media/usb/uvc/uvc_driver.c
-+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2969,6 +2969,18 @@ static const struct usb_device_id uvc_id
- .bInterfaceSubClass = 1,
- .bInterfaceProtocol = 0,
- .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
-+ /* iPassion iP2970 */
-+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
-+ | USB_DEVICE_ID_MATCH_INT_INFO,
-+ .idVendor = 0x1B3B,
-+ .idProduct = 0x2970,
-+ .bInterfaceClass = USB_CLASS_VIDEO,
-+ .bInterfaceSubClass = 1,
-+ .bInterfaceProtocol = 0,
-+ .driver_info = UVC_QUIRK_PROBE_MINMAX
-+ | UVC_QUIRK_STREAM_NO_FID
-+ | UVC_QUIRK_MOTION
-+ | UVC_QUIRK_SINGLE_ISO },
- /* Generic USB Video Class */
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
---- a/drivers/media/usb/uvc/uvc_status.c
-+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u
- if (uvc_event_control(urb, status, len))
- /* The URB will be resubmitted in work context. */
- return;
-+ dev->motion = 1;
- break;
- }
-
-@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d
- }
-
- pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
-+ dev->motion = 0;
-
- /* For high-speed interrupt endpoints, the bInterval value is used as
- * an exponent of two. Some developers forgot about it.
---- a/drivers/media/usb/uvc/uvc_video.c
-+++ b/drivers/media/usb/uvc/uvc_video.c
-@@ -16,6 +16,11 @@
- #include <linux/wait.h>
- #include <linux/atomic.h>
- #include <asm/unaligned.h>
-+#include <linux/skbuff.h>
-+#include <linux/kobject.h>
-+#include <linux/netlink.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-
- #include <media/v4l2-common.h>
-
-@@ -1156,9 +1161,149 @@ static void uvc_video_decode_data(struct
- uvc_urb->async_operations++;
- }
-
-+struct bh_priv {
-+ unsigned long seen;
-+};
-+
-+struct bh_event {
-+ const char *name;
-+ struct sk_buff *skb;
-+ struct work_struct work;
-+};
-+
-+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
-+#define BH_DBG(fmt, args...) do {} while (0)
-+#define BH_SKB_SIZE 2048
-+
-+extern u64 uevent_next_seqnum(void);
-+static int seen = 0;
-+
-+static int bh_event_add_var(struct bh_event *event, int argv,
-+ const char *format, ...)
-+{
-+ static char buf[128];
-+ char *s;
-+ va_list args;
-+ int len;
-+
-+ if (argv)
-+ return 0;
-+
-+ va_start(args, format);
-+ len = vsnprintf(buf, sizeof(buf), format, args);
-+ va_end(args);
-+
-+ if (len >= sizeof(buf)) {
-+ BH_ERR("buffer size too small\n");
-+ WARN_ON(1);
-+ return -ENOMEM;
-+ }
-+
-+ s = skb_put(event->skb, len + 1);
-+ strcpy(s, buf);
-+
-+ BH_DBG("added variable '%s'\n", s);
-+
-+ return 0;
-+}
-+
-+static int motion_hotplug_fill_event(struct bh_event *event)
-+{
-+ int s = jiffies;
-+ int ret;
-+
-+ if (!seen)
-+ seen = jiffies;
-+
-+ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "PATH=%s",
-+ "/sbin:/bin:/usr/sbin:/usr/bin");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "ACTION=motion");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
-+ if (ret)
-+ return ret;
-+ seen = s;
-+
-+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
-+
-+ return ret;
-+}
-+
-+static void motion_hotplug_work(struct work_struct *work)
-+{
-+ struct bh_event *event = container_of(work, struct bh_event, work);
-+ int ret = 0;
-+
-+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
-+ if (!event->skb)
-+ goto out_free_event;
-+
-+ ret = bh_event_add_var(event, 0, "%s@", "add");
-+ if (ret)
-+ goto out_free_skb;
-+
-+ ret = motion_hotplug_fill_event(event);
-+ if (ret)
-+ goto out_free_skb;
-+
-+ NETLINK_CB(event->skb).dst_group = 1;
-+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-+
-+out_free_skb:
-+ if (ret) {
-+ BH_ERR("work error %d\n", ret);
-+ kfree_skb(event->skb);
-+ }
-+out_free_event:
-+ kfree(event);
-+}
-+
-+static int motion_hotplug_create_event(void)
-+{
-+ struct bh_event *event;
-+
-+ event = kzalloc(sizeof(*event), GFP_KERNEL);
-+ if (!event)
-+ return -ENOMEM;
-+
-+ event->name = "motion";
-+
-+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
-+ schedule_work(&event->work);
-+
-+ return 0;
-+}
-+
-+#define MOTION_FLAG_OFFSET 4
- static void uvc_video_decode_end(struct uvc_streaming *stream,
- struct uvc_buffer *buf, const u8 *data, int len)
- {
-+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
-+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
-+ u8 *mem;
-+ buf->state = UVC_BUF_STATE_READY;
-+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
-+ if ( stream->dev->motion ) {
-+ stream->dev->motion = 0;
-+ motion_hotplug_create_event();
-+ } else {
-+ *mem &= 0x7f;
-+ }
-+ }
-+
- /* Mark the buffer as done if the EOF marker is set. */
- if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1715,6 +1860,8 @@ static int uvc_init_video_isoc(struct uv
- if (npackets == 0)
- return -ENOMEM;
-
-+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
-+ npackets = 1;
- size = npackets * psize;
-
- for_each_uvc_urb(uvc_urb, stream) {
---- a/drivers/media/usb/uvc/uvcvideo.h
-+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -203,7 +203,9 @@
- #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
- #define UVC_QUIRK_FORCE_Y8 0x00000800
- #define UVC_QUIRK_FORCE_BPP 0x00001000
--
-+#define UVC_QUIRK_MOTION 0x00001000
-+#define UVC_QUIRK_SINGLE_ISO 0x00002000
-+
- /* Format flags */
- #define UVC_FMT_FLAG_COMPRESSED 0x00000001
- #define UVC_FMT_FLAG_STREAM 0x00000002
-@@ -672,6 +674,7 @@ struct uvc_device {
- u8 *status;
- struct input_dev *input;
- char input_phys[64];
-+ int motion;
-
- struct uvc_ctrl_work {
- struct work_struct work;
+++ /dev/null
-From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
-
-Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
- 1 file changed, 28 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-@@ -0,0 +1,28 @@
-+Ralink SoC RT2880 SPI master controller.
-+
-+This SPI controller is found on most wireless SoCs made by ralink.
-+
-+Required properties:
-+- compatible : "ralink,rt2880-spi"
-+- reg : The register base for the controller.
-+- #address-cells : <1>, as required by generic SPI binding.
-+- #size-cells : <0>, also as required by generic SPI binding.
-+
-+Child nodes as per the generic SPI binding.
-+
-+Example:
-+
-+ spi@b00 {
-+ compatible = "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ m25p80@0 {
-+ compatible = "m25p80";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ };
-+ };
-+
+++ /dev/null
-From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:15:12 +0100
-Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
-
-Add the driver needed to make SPI work on Ralink SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 537 insertions(+)
- create mode 100644 drivers/spi/spi-rt2880.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -689,6 +689,12 @@ config SPI_QCOM_GENI
- This driver can also be built as a module. If so, the module
- will be called spi-geni-qcom.
-
-+config SPI_RT2880
-+ tristate "Ralink RT288x SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -96,6 +96,7 @@ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockc
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
-+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
---- /dev/null
-+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,530 @@
-+/*
-+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ * Author: Shadi Ammouri <shadi@marvell.com>
-+ * Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#define DRIVER_NAME "spi-rt2880"
-+
-+#define RAMIPS_SPI_STAT 0x00
-+#define RAMIPS_SPI_CFG 0x10
-+#define RAMIPS_SPI_CTL 0x14
-+#define RAMIPS_SPI_DATA 0x20
-+#define RAMIPS_SPI_ADDR 0x24
-+#define RAMIPS_SPI_BS 0x28
-+#define RAMIPS_SPI_USER 0x2C
-+#define RAMIPS_SPI_TXFIFO 0x30
-+#define RAMIPS_SPI_RXFIFO 0x34
-+#define RAMIPS_SPI_FIFO_STAT 0x38
-+#define RAMIPS_SPI_MODE 0x3C
-+#define RAMIPS_SPI_DEV_OFFSET 0x40
-+#define RAMIPS_SPI_DMA 0x80
-+#define RAMIPS_SPI_DMASTAT 0x84
-+#define RAMIPS_SPI_ARBITER 0xF0
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+/* SPICFG register bit field */
-+#define SPICFG_ADDRMODE BIT(12)
-+#define SPICFG_RXENVDIS BIT(11)
-+#define SPICFG_RXCAP BIT(10)
-+#define SPICFG_SPIENMODE BIT(9)
-+#define SPICFG_MSBFIRST BIT(8)
-+#define SPICFG_SPICLKPOL BIT(6)
-+#define SPICFG_RXCLKEDGE_FALLING BIT(5)
-+#define SPICFG_TXCLKEDGE_FALLING BIT(4)
-+#define SPICFG_HIZSPI BIT(3)
-+#define SPICFG_SPICLK_PRESCALE_MASK 0x7
-+#define SPICFG_SPICLK_DIV2 0
-+#define SPICFG_SPICLK_DIV4 1
-+#define SPICFG_SPICLK_DIV8 2
-+#define SPICFG_SPICLK_DIV16 3
-+#define SPICFG_SPICLK_DIV32 4
-+#define SPICFG_SPICLK_DIV64 5
-+#define SPICFG_SPICLK_DIV128 6
-+#define SPICFG_SPICLK_DISABLE 7
-+
-+/* SPICTL register bit field */
-+#define SPICTL_START BIT(4)
-+#define SPICTL_HIZSDO BIT(3)
-+#define SPICTL_STARTWR BIT(2)
-+#define SPICTL_STARTRD BIT(1)
-+#define SPICTL_SPIENA BIT(0)
-+
-+/* SPIUSER register bit field */
-+#define SPIUSER_USERMODE BIT(21)
-+#define SPIUSER_INSTR_PHASE BIT(20)
-+#define SPIUSER_ADDR_PHASE_MASK 0x7
-+#define SPIUSER_ADDR_PHASE_OFFSET 17
-+#define SPIUSER_MODE_PHASE BIT(16)
-+#define SPIUSER_DUMMY_PHASE_MASK 0x3
-+#define SPIUSER_DUMMY_PHASE_OFFSET 14
-+#define SPIUSER_DATA_PHASE_MASK 0x3
-+#define SPIUSER_DATA_PHASE_OFFSET 12
-+#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_ADDR_TYPE_OFFSET 9
-+#define SPIUSER_MODE_TYPE_OFFSET 6
-+#define SPIUSER_DUMMY_TYPE_OFFSET 3
-+#define SPIUSER_DATA_TYPE_OFFSET 0
-+#define SPIUSER_TRANSFER_MASK 0x7
-+#define SPIUSER_TRANSFER_SINGLE BIT(0)
-+#define SPIUSER_TRANSFER_DUAL BIT(1)
-+#define SPIUSER_TRANSFER_QUAD BIT(2)
-+
-+#define SPIUSER_TRANSFER_TYPE(type) ( \
-+ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
-+ (type << SPIUSER_MODE_TYPE_OFFSET) | \
-+ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
-+ (type << SPIUSER_DATA_TYPE_OFFSET) \
-+)
-+
-+/* SPIFIFOSTAT register bit field */
-+#define SPIFIFOSTAT_TXEMPTY BIT(19)
-+#define SPIFIFOSTAT_RXEMPTY BIT(18)
-+#define SPIFIFOSTAT_TXFULL BIT(17)
-+#define SPIFIFOSTAT_RXFULL BIT(16)
-+#define SPIFIFOSTAT_FIFO_MASK 0xff
-+#define SPIFIFOSTAT_TX_OFFSET 8
-+#define SPIFIFOSTAT_RX_OFFSET 0
-+
-+#define SPI_FIFO_DEPTH 16
-+
-+/* SPIMODE register bit field */
-+#define SPIMODE_MODE_OFFSET 24
-+#define SPIMODE_DUMMY_OFFSET 0
-+
-+/* SPIARB register bit field */
-+#define SPICTL_ARB_EN BIT(31)
-+#define SPICTL_CSCTL1 BIT(16)
-+#define SPI1_POR BIT(1)
-+#define SPI0_POR BIT(0)
-+
-+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
-+ SPI_CS_HIGH)
-+
-+static atomic_t hw_reset_count = ATOMIC_INIT(0);
-+
-+struct rt2880_spi {
-+ struct spi_master *master;
-+ void __iomem *base;
-+ u32 speed;
-+ u16 wait_loops;
-+ u16 mode;
-+ struct clk *clk;
-+};
-+
-+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
-+ const u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) | mask), addr);
-+}
-+
-+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) & ~mask), addr);
-+}
-+
-+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ u32 rate;
-+ u32 prescale;
-+
-+ /*
-+ * the supported rates are: 2, 4, 8, ... 128
-+ * round up as we look for equal or less speed
-+ */
-+ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
-+ rate = roundup_pow_of_two(rate);
-+
-+ /* Convert the rate to SPI clock divisor value. */
-+ prescale = ilog2(rate / 2);
-+
-+ /* some tolerance. double and add 100 */
-+ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
-+ (clk_get_rate(rs->clk) / rate);
-+ rs->wait_loops = (rs->wait_loops << 1) + 100;
-+ rs->speed = speed;
-+
-+ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
-+ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
-+ rs->wait_loops);
-+
-+ return prescale;
-+}
-+
-+static u32 get_arbiter_offset(struct spi_master *master)
-+{
-+ u32 offset;
-+
-+ offset = RAMIPS_SPI_ARBITER;
-+ if (master->bus_num == 1)
-+ offset -= RAMIPS_SPI_DEV_OFFSET;
-+
-+ return offset;
-+}
-+
-+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+
-+ if (enable)
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ else
-+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+}
-+
-+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
-+{
-+ int loop = rs->wait_loops * len;
-+
-+ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
-+ cpu_relax();
-+
-+ if (loop)
-+ return 0;
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void rt2880_dump_reg(struct spi_master *master)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+
-+ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
-+ "data: %08x, arb: %08x\n",
-+ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
-+ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
-+ rt2880_spi_read(rs, get_arbiter_offset(master)));
-+}
-+
-+static int rt2880_spi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi, struct spi_transfer *xfer)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ unsigned len;
-+ const u8 *tx = xfer->tx_buf;
-+ u8 *rx = xfer->rx_buf;
-+ int err = 0;
-+
-+ /* change clock speed */
-+ if (unlikely(rs->speed != xfer->speed_hz)) {
-+ u32 reg;
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
-+ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+ }
-+
-+ if (tx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ }
-+ }
-+
-+ if (rx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+ }
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+/* copy from spi.c */
-+static void spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ if (spi->mode & SPI_CS_HIGH)
-+ enable = !enable;
-+
-+ if (spi->cs_gpio >= 0)
-+ gpio_set_value(spi->cs_gpio, !enable);
-+ else if (spi->master->set_cs)
-+ spi->master->set_cs(spi, !enable);
-+}
-+
-+static int rt2880_spi_setup(struct spi_device *spi)
-+{
-+ struct spi_master *master = spi->master;
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ u32 reg, old_reg, arbit_off;
-+
-+ if ((spi->max_speed_hz > master->max_speed_hz) ||
-+ (spi->max_speed_hz < master->min_speed_hz)) {
-+ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ if (!(master->bits_per_word_mask &
-+ BIT(spi->bits_per_word - 1))) {
-+ dev_err(&spi->dev, "invalide bits_per_word %d\n",
-+ spi->bits_per_word);
-+ return -EINVAL;
-+ }
-+
-+ /* the hardware seems can't work on mode0 force it to mode3 */
-+ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
-+ dev_warn(&spi->dev, "force spi mode3\n");
-+ spi->mode |= SPI_MODE_3;
-+ }
-+
-+ /* chip polarity */
-+ arbit_off = get_arbiter_offset(master);
-+ reg = old_reg = rt2880_spi_read(rs, arbit_off);
-+ if (spi->mode & SPI_CS_HIGH) {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg |= SPI1_POR;
-+ break;
-+ default:
-+ reg |= SPI0_POR;
-+ break;
-+ }
-+ } else {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg &= ~SPI1_POR;
-+ break;
-+ default:
-+ reg &= ~SPI0_POR;
-+ break;
-+ }
-+ }
-+
-+ /* enable spi1 */
-+ if (master->bus_num == 1)
-+ reg |= SPICTL_ARB_EN;
-+
-+ if (reg != old_reg)
-+ rt2880_spi_write(rs, arbit_off, reg);
-+
-+ /* deselected the spi device */
-+ spi_set_cs(spi, false);
-+
-+ rt2880_dump_reg(master);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_prepare_message(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = msg->spi;
-+ u32 reg;
-+
-+ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
-+ return 0;
-+
-+#if 0
-+ /* set spido to tri-state */
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
-+#endif
-+
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+
-+ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
-+ SPICFG_RXCLKEDGE_FALLING |
-+ SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_PRESCALE_MASK);
-+
-+ /* MSB */
-+ if (!(spi->mode & SPI_LSB_FIRST))
-+ reg |= SPICFG_MSBFIRST;
-+
-+ /* spi mode */
-+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+ case SPI_MODE_0:
-+ reg |= SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_1:
-+ reg |= SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_2:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_3:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ }
-+ rs->mode = spi->mode;
-+
-+#if 0
-+ /* set spiclk and spiena to tri-state */
-+ reg |= SPICFG_HIZSPI;
-+#endif
-+
-+ /* clock divide */
-+ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+ void __iomem *base;
-+ struct resource *r;
-+ struct clk *clk;
-+ int ret;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ ret = clk_prepare_enable(clk);
-+ if (ret)
-+ goto err_clk;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (master == NULL) {
-+ dev_dbg(&pdev->dev, "master allocation failed\n");
-+ ret = -ENOMEM;
-+ goto err_clk;
-+ }
-+
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->mode_bits = RT2880_SPI_MODE_BITS;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->min_speed_hz = clk_get_rate(clk) / 128;
-+ master->max_speed_hz = clk_get_rate(clk) / 2;
-+ master->flags = SPI_MASTER_HALF_DUPLEX;
-+ master->setup = rt2880_spi_setup;
-+ master->prepare_message = rt2880_spi_prepare_message;
-+ master->set_cs = rt2880_spi_set_cs;
-+ master->transfer_one = rt2880_spi_transfer_one,
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_master_get_devdata(master);
-+ rs->master = master;
-+ rs->base = base;
-+ rs->clk = clk;
-+
-+ if (atomic_inc_return(&hw_reset_count) == 1)
-+ device_reset(&pdev->dev);
-+
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
-+ goto err_master;
-+ }
-+
-+ return ret;
-+
-+err_master:
-+ spi_master_put(master);
-+ kfree(master);
-+err_clk:
-+ clk_disable_unprepare(clk);
-+
-+ return ret;
-+}
-+
-+static int rt2880_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_master_get_devdata(master);
-+
-+ clk_disable_unprepare(rs->clk);
-+ atomic_dec(&hw_reset_count);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+ { .compatible = "ralink,rt2880-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
-+static struct platform_driver rt2880_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_spi_match,
-+ },
-+ .probe = rt2880_spi_probe,
-+ .remove = rt2880_spi_remove,
-+};
-+
-+module_platform_driver(rt2880_spi_driver);
-+
-+MODULE_DESCRIPTION("Ralink SPI driver");
-+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:52:56 +0100
-Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
- 4 files changed, 359 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
- create mode 100644 drivers/i2c/busses/i2c-ralink.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-@@ -0,0 +1,27 @@
-+I2C for Ralink platforms
-+
-+Required properties :
-+- compatible : Must be "link,rt3052-i2c"
-+- reg: physical base address of the controller and length of memory mapped
-+ region.
-+- #address-cells = <1>;
-+- #size-cells = <0>;
-+
-+Optional properties:
-+- Child nodes conforming to i2c bus binding
-+
-+Example :
-+
-+palmbus@10000000 {
-+ i2c@900 {
-+ compatible = "link,rt3052-i2c";
-+ reg = <0x900 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hwmon@4b {
-+ compatible = "national,lm92";
-+ reg = <0x4b>;
-+ };
-+ };
-+};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -954,6 +954,11 @@ config I2C_RK3X
- This driver can also be built as a module. If so, the module will
- be called i2c-rk3x.
-
-+config I2C_RALINK
-+ tristate "Ralink I2C Controller"
-+ depends on RALINK && !SOC_MT7621
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
- obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
-+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
- obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o
- obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o
- obj-$(CONFIG_I2C_QUP) += i2c-qup.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,435 @@
-+/*
-+ * drivers/i2c/busses/i2c-ralink.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#define REG_CONFIG_REG 0x00
-+#define REG_CLKDIV_REG 0x04
-+#define REG_DEVADDR_REG 0x08
-+#define REG_ADDR_REG 0x0C
-+#define REG_DATAOUT_REG 0x10
-+#define REG_DATAIN_REG 0x14
-+#define REG_STATUS_REG 0x18
-+#define REG_STARTXFR_REG 0x1C
-+#define REG_BYTECNT_REG 0x20
-+
-+/* REG_CONFIG_REG */
-+#define I2C_ADDRLEN_OFFSET 5
-+#define I2C_DEVADLEN_OFFSET 2
-+#define I2C_ADDRLEN_MASK 0x3
-+#define I2C_ADDR_DIS BIT(1)
-+#define I2C_DEVADDR_DIS BIT(0)
-+#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET)
-+#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET)
-+#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
-+
-+/* REG_CLKDIV_REG */
-+#define I2C_CLKDIV_MASK 0xffff
-+
-+/* REG_DEVADDR_REG */
-+#define I2C_DEVADDR_MASK 0x7f
-+
-+/* REG_ADDR_REG */
-+#define I2C_ADDR_MASK 0xff
-+
-+/* REG_STATUS_REG */
-+#define I2C_STARTERR BIT(4)
-+#define I2C_ACKERR BIT(3)
-+#define I2C_DATARDY BIT(2)
-+#define I2C_SDOEMPTY BIT(1)
-+#define I2C_BUSY BIT(0)
-+
-+/* REG_STARTXFR_REG */
-+#define NOSTOP_CMD BIT(2)
-+#define NODATA_CMD BIT(1)
-+#define READ_CMD BIT(0)
-+
-+/* REG_BYTECNT_REG */
-+#define BYTECNT_MAX 64
-+#define SET_BYTECNT(x) (x - 1)
-+
-+/* timeout waiting for I2C devices to respond (clock streching) */
-+#define TIMEOUT_MS 1000
-+#define DELAY_INTERVAL_US 100
-+
-+struct rt_i2c {
-+ void __iomem *base;
-+ struct clk *clk;
-+ struct device *dev;
-+ struct i2c_adapter adap;
-+ u32 cur_clk;
-+ u32 clk_div;
-+ u32 flags;
-+};
-+
-+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
-+{
-+ iowrite32(val, i2c->base + reg);
-+}
-+
-+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
-+{
-+ return ioread32(i2c->base + reg);
-+}
-+
-+static int poll_down_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+
-+ do {
-+ if (!(readl_relaxed(addr) & mask))
-+ return 0;
-+
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
-+}
-+
-+static int rt_i2c_wait_idle(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int poll_up_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+ u32 status;
-+
-+ do {
-+ status = readl_relaxed(addr);
-+
-+ /* check error status */
-+ if (status & I2C_STARTERR)
-+ return -EAGAIN;
-+ else if (status & I2C_ACKERR)
-+ return -ENXIO;
-+ else if (status & mask)
-+ return 0;
-+
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static void rt_i2c_reset(struct rt_i2c *i2c)
-+{
-+ device_reset(i2c->adap.dev.parent);
-+ barrier();
-+ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
-+}
-+
-+static void rt_i2c_dump_reg(struct rt_i2c *i2c)
-+{
-+ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
-+ "addr %08x, dataout %08x, datain %08x, " \
-+ "status %08x, startxfr %08x, bytecnt %08x\n",
-+ rt_i2c_r32(i2c, REG_CONFIG_REG),
-+ rt_i2c_r32(i2c, REG_CLKDIV_REG),
-+ rt_i2c_r32(i2c, REG_DEVADDR_REG),
-+ rt_i2c_r32(i2c, REG_ADDR_REG),
-+ rt_i2c_r32(i2c, REG_DATAOUT_REG),
-+ rt_i2c_r32(i2c, REG_DATAIN_REG),
-+ rt_i2c_r32(i2c, REG_STATUS_REG),
-+ rt_i2c_r32(i2c, REG_STARTXFR_REG),
-+ rt_i2c_r32(i2c, REG_BYTECNT_REG));
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-+ int num)
-+{
-+ struct rt_i2c *i2c;
-+ struct i2c_msg *pmsg;
-+ unsigned char addr;
-+ int i, j, ret;
-+ u32 cmd;
-+
-+ i2c = i2c_get_adapdata(adap);
-+
-+ for (i = 0; i < num; i++) {
-+ pmsg = &msgs[i];
-+ if (i == (num - 1))
-+ cmd = 0;
-+ else
-+ cmd = NOSTOP_CMD;
-+
-+ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
-+ pmsg->addr, pmsg->len, pmsg->flags,
-+ (cmd == 0)? 1 : 0);
-+
-+ /* wait hardware idle */
-+ if ((ret = rt_i2c_wait_idle(i2c)))
-+ goto err_timeout;
-+
-+ if (pmsg->flags & I2C_M_TEN) {
-+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
-+ /* 10 bits address */
-+ addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
-+ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
-+ REG_DEVADDR_REG);
-+ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
-+ REG_ADDR_REG);
-+ } else {
-+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
-+ REG_CONFIG_REG);
-+ /* 7 bits address */
-+ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
-+ REG_DEVADDR_REG);
-+ }
-+
-+ /* buffer length */
-+ if (pmsg->len == 0)
-+ cmd |= NODATA_CMD;
-+ else
-+ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
-+ REG_BYTECNT_REG);
-+
-+ j = 0;
-+ if (pmsg->flags & I2C_M_RD) {
-+ cmd |= READ_CMD;
-+ /* start transfer */
-+ barrier();
-+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+ do {
-+ /* wait */
-+ if ((ret = rt_i2c_wait_rx_done(i2c)))
-+ goto err_timeout;
-+ /* read data */
-+ if (pmsg->len)
-+ pmsg->buf[j] = rt_i2c_r32(i2c,
-+ REG_DATAIN_REG);
-+ j++;
-+ } while (j < pmsg->len);
-+ } else {
-+ do {
-+ /* write data */
-+ if (pmsg->len)
-+ rt_i2c_w32(i2c, pmsg->buf[j],
-+ REG_DATAOUT_REG);
-+ /* start transfer */
-+ if (j == 0) {
-+ barrier();
-+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+ }
-+ /* wait */
-+ if ((ret = rt_i2c_wait_tx_done(i2c)))
-+ goto err_timeout;
-+ j++;
-+ } while (j < pmsg->len);
-+ }
-+ }
-+ /* the return value is number of executed messages */
-+ ret = i;
-+
-+ return ret;
-+
-+err_timeout:
-+ rt_i2c_dump_reg(i2c);
-+ rt_i2c_reset(i2c);
-+ return ret;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+ .master_xfer = rt_i2c_master_xfer,
-+ .functionality = rt_i2c_func,
-+};
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+ { .compatible = "ralink,rt2880-i2c" },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static struct i2c_adapter_quirks rt_i2c_quirks = {
-+ .max_write_len = BYTECNT_MAX,
-+ .max_read_len = BYTECNT_MAX,
-+};
-+
-+static int rt_i2c_init(struct rt_i2c *i2c)
-+{
-+ u32 reg;
-+
-+ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
-+ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
-+ (2 * i2c->cur_clk);
-+ if (i2c->clk_div < 8)
-+ i2c->clk_div = 8;
-+ if (i2c->clk_div > I2C_CLKDIV_MASK)
-+ i2c->clk_div = I2C_CLKDIV_MASK;
-+
-+ /* check support combinde/repeated start message */
-+ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
-+ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
-+
-+ rt_i2c_reset(i2c);
-+
-+ return reg;
-+}
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct rt_i2c *i2c;
-+ struct i2c_adapter *adap;
-+ const struct of_device_id *match;
-+ int ret, restart;
-+
-+ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENODEV;
-+ }
-+
-+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
-+ if (!i2c) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+
-+ i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(i2c->base))
-+ return PTR_ERR(i2c->base);
-+
-+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(i2c->clk)) {
-+ dev_err(&pdev->dev, "no clock defined\n");
-+ return -ENODEV;
-+ }
-+ clk_prepare_enable(i2c->clk);
-+ i2c->dev = &pdev->dev;
-+
-+ if (of_property_read_u32(pdev->dev.of_node,
-+ "clock-frequency", &i2c->cur_clk))
-+ i2c->cur_clk = 100000;
-+
-+ adap = &i2c->adap;
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adap->algo = &rt_i2c_algo;
-+ adap->retries = 3;
-+ adap->dev.parent = &pdev->dev;
-+ i2c_set_adapdata(adap, i2c);
-+ adap->dev.of_node = pdev->dev.of_node;
-+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+ adap->quirks = &rt_i2c_quirks;
-+
-+ platform_set_drvdata(pdev, i2c);
-+
-+ restart = rt_i2c_init(i2c);
-+
-+ ret = i2c_add_adapter(adap);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to add adapter\n");
-+ clk_disable_unprepare(i2c->clk);
-+ return ret;
-+ }
-+
-+ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
-+ i2c->cur_clk/1000, restart ? "" : "not ");
-+
-+ return ret;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+ struct rt_i2c *i2c = platform_get_drvdata(pdev);
-+
-+ i2c_del_adapter(&i2c->adap);
-+ clk_disable_unprepare(i2c->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rt_i2c_driver = {
-+ .probe = rt_i2c_probe,
-+ .remove = rt_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-ralink",
-+ .of_match_table = i2c_rt_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+ return platform_driver_register(&rt_i2c_driver);
-+}
-+subsys_initcall(i2c_rt_init);
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+ platform_driver_unregister(&rt_i2c_driver);
-+}
-+module_exit(i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("Ralink I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:Ralink-I2C");
+++ /dev/null
-From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 13 Nov 2014 19:08:40 +0100
-Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mmc/host/Kconfig | 2 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/mtk-mmc/Kconfig | 16 +
- drivers/mmc/host/mtk-mmc/Makefile | 42 +
- drivers/mmc/host/mtk-mmc/board.h | 137 ++
- drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
- drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
- drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
- drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
- 9 files changed, 4762 insertions(+)
- create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
- create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
- create mode 100644 drivers/mmc/host/mtk-mmc/board.h
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
- create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
- create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -1101,3 +1101,5 @@ config MMC_OWL
-
- config MMC_SDHCI_EXTERNAL_DMA
- bool
-+
-+source "drivers/mmc/host/mtk-mmc/Kconfig"
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for MMC/SD host controller drivers
- #
-
-+obj-$(CONFIG_MTK_MMC) += mtk-mmc/
- obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
- armmmci-y := mmci.o
- armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
+++ /dev/null
-From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:31:47 +0100
-Subject: [PATCH 48/53] asoc: add mt7620 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 +
- sound/soc/Kconfig | 1 +
- sound/soc/Makefile | 1 +
- sound/soc/ralink/Kconfig | 15 ++
- sound/soc/ralink/Makefile | 11 +
- sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
- 7 files changed, 699 insertions(+)
- create mode 100644 sound/soc/ralink/Kconfig
- create mode 100644 sound/soc/ralink/Makefile
- create mode 100644 sound/soc/ralink/mt7620-i2s.c
- create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -13,6 +13,7 @@
- #include <linux/of_fdt.h>
- #include <linux/kernel.h>
- #include <linux/memblock.h>
-+#include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
-
-@@ -24,6 +25,7 @@
- #include "common.h"
-
- __iomem void *rt_sysc_membase;
-+EXPORT_SYMBOL(rt_sysc_membase);
- __iomem void *rt_memc_membase;
-
- __iomem void *plat_of_remap_node(const char *node)
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig"
- source "sound/soc/pxa/Kconfig"
- source "sound/soc/qcom/Kconfig"
- source "sound/soc/rockchip/Kconfig"
-+source "sound/soc/ralink/Kconfig"
- source "sound/soc/samsung/Kconfig"
- source "sound/soc/sh/Kconfig"
- source "sound/soc/sirf/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
- obj-$(CONFIG_SND_SOC) += pxa/
- obj-$(CONFIG_SND_SOC) += qcom/
- obj-$(CONFIG_SND_SOC) += rockchip/
-+obj-$(CONFIG_SND_SOC) += ralink/
- obj-$(CONFIG_SND_SOC) += samsung/
- obj-$(CONFIG_SND_SOC) += sh/
- obj-$(CONFIG_SND_SOC) += sirf/
---- /dev/null
-+++ b/sound/soc/ralink/Kconfig
-@@ -0,0 +1,8 @@
-+config SND_RALINK_SOC_I2S
-+ depends on RALINK && SND_SOC && !SOC_RT288X
-+ select SND_SOC_GENERIC_DMAENGINE_PCM
-+ select REGMAP_MMIO
-+ tristate "SoC Audio (I2S protocol) for Ralink SoC"
-+ help
-+ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
-+ based boards.
---- /dev/null
-+++ b/sound/soc/ralink/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Ralink/MediaTek Platform Support
-+#
-+snd-soc-ralink-i2s-objs := ralink-i2s.o
-+
-+obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
---- /dev/null
-+++ b/sound/soc/ralink/ralink-i2s.c
-@@ -0,0 +1,965 @@
-+/*
-+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/debugfs.h>
-+#include <linux/of_device.h>
-+#include <sound/pcm_params.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define DRV_NAME "ralink-i2s"
-+
-+#define I2S_REG_CFG0 0x00
-+#define I2S_REG_INT_STATUS 0x04
-+#define I2S_REG_INT_EN 0x08
-+#define I2S_REG_FF_STATUS 0x0c
-+#define I2S_REG_WREG 0x10
-+#define I2S_REG_RREG 0x14
-+#define I2S_REG_CFG1 0x18
-+#define I2S_REG_DIVCMP 0x20
-+#define I2S_REG_DIVINT 0x24
-+
-+/* I2S_REG_CFG0 */
-+#define I2S_REG_CFG0_EN BIT(31)
-+#define I2S_REG_CFG0_DMA_EN BIT(30)
-+#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
-+#define I2S_REG_CFG0_TX_EN BIT(24)
-+#define I2S_REG_CFG0_RX_EN BIT(20)
-+#define I2S_REG_CFG0_SLAVE BIT(16)
-+#define I2S_REG_CFG0_RX_THRES 12
-+#define I2S_REG_CFG0_TX_THRES 4
-+#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+/* RT305x */
-+#define I2S_REG_CFG0_CLK_DIS BIT(8)
-+#define I2S_REG_CFG0_TXCH_SWAP BIT(3)
-+#define I2S_REG_CFG0_TXCH1_OFF BIT(2)
-+#define I2S_REG_CFG0_TXCH0_OFF BIT(1)
-+#define I2S_REG_CFG0_SLAVE_EN BIT(0)
-+/* RT3883 */
-+#define I2S_REG_CFG0_RXCH_SWAP BIT(11)
-+#define I2S_REG_CFG0_RXCH1_OFF BIT(10)
-+#define I2S_REG_CFG0_RXCH0_OFF BIT(9)
-+#define I2S_REG_CFG0_WS_INV BIT(0)
-+/* MT7628 */
-+#define I2S_REG_CFG0_FMT_LE BIT(29)
-+#define I2S_REG_CFG0_SYS_BE BIT(28)
-+#define I2S_REG_CFG0_NORM_24 BIT(18)
-+#define I2S_REG_CFG0_DATA_24 BIT(17)
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_REG_INT_RX_FAULT BIT(7)
-+#define I2S_REG_INT_RX_OVRUN BIT(6)
-+#define I2S_REG_INT_RX_UNRUN BIT(5)
-+#define I2S_REG_INT_RX_THRES BIT(4)
-+#define I2S_REG_INT_TX_FAULT BIT(3)
-+#define I2S_REG_INT_TX_OVRUN BIT(2)
-+#define I2S_REG_INT_TX_UNRUN BIT(1)
-+#define I2S_REG_INT_TX_THRES BIT(0)
-+#define I2S_REG_INT_TX_MASK 0xf
-+#define I2S_REG_INT_RX_MASK 0xf0
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf)
-+#define I2S_TX_AVCNT(x) (x & 0xf)
-+/* MT7628 */
-+#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f)
-+#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f)
-+
-+/* I2S_REG_CFG1 */
-+#define I2S_REG_CFG1_LBK BIT(31)
-+#define I2S_REG_CFG1_EXTLBK BIT(30)
-+/* RT3883 */
-+#define I2S_REG_CFG1_LEFT_J BIT(0)
-+#define I2S_REG_CFG1_RIGHT_J BIT(1)
-+#define I2S_REG_CFG1_FMT_MASK 0x3
-+
-+/* I2S_REG_DIVCMP */
-+#define I2S_REG_DIVCMP_CLKEN BIT(31)
-+#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff
-+
-+/* I2S_REG_DIVINT */
-+#define I2S_REG_DIVINT_MASK 0x3ff
-+
-+/* BCLK dividers */
-+#define RALINK_I2S_DIVCMP 0
-+#define RALINK_I2S_DIVINT 1
-+
-+/* FIFO */
-+#define RALINK_I2S_FIFO_SIZE 32
-+
-+/* feature flags */
-+#define RALINK_FLAGS_TXONLY BIT(0)
-+#define RALINK_FLAGS_LEFT_J BIT(1)
-+#define RALINK_FLAGS_RIGHT_J BIT(2)
-+#define RALINK_FLAGS_ENDIAN BIT(3)
-+#define RALINK_FLAGS_24BIT BIT(4)
-+
-+#define RALINK_I2S_INT_EN 0
-+
-+struct ralink_i2s_stats {
-+ u32 dmafault;
-+ u32 overrun;
-+ u32 underrun;
-+ u32 belowthres;
-+};
-+
-+struct ralink_i2s {
-+ struct device *dev;
-+ void __iomem *regs;
-+ struct clk *clk;
-+ struct regmap *regmap;
-+ u32 flags;
-+ unsigned int fmt;
-+ u16 txdma_req;
-+ u16 rxdma_req;
-+
-+ struct snd_dmaengine_dai_dma_data playback_dma_data;
-+ struct snd_dmaengine_dai_dma_data capture_dma_data;
-+
-+ struct dentry *dbg_dir;
-+ struct dentry *dbg_stats;
-+ struct ralink_i2s_stats txstats;
-+ struct ralink_i2s_stats rxstats;
-+};
-+
-+static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
-+{
-+ u32 buf[10];
-+ int ret;
-+
-+ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
-+ buf, ARRAY_SIZE(buf));
-+
-+ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
-+ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
-+ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
-+ buf[0], buf[1], buf[2], buf[3], buf[4],
-+ buf[5], buf[6], buf[8], buf[9]);
-+}
-+
-+static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
-+ int clk_id, unsigned int freq, int dir)
-+{
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned long clk = clk_get_rate(i2s->clk);
-+ int div;
-+ uint32_t data;
-+
-+ /* disable clock at slave mode */
-+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+ SND_SOC_DAIFMT_CBM_CFM) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_CLK_DIS,
-+ I2S_REG_CFG0_CLK_DIS);
-+ return 0;
-+ }
-+
-+ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
-+ div = (clk / rate ) - 1;
-+
-+ data = rt_sysc_r32(0x30);
-+ data &= (0xff << 8);
-+ data |= (0x1 << 15) | (div << 8);
-+ rt_sysc_w32(data, 0x30);
-+
-+ /* enable clock */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
-+
-+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
-+ clk, rate, div);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned long clk = clk_get_rate(i2s->clk);
-+ int divint, divcomp;
-+
-+ /* disable clock at slave mode */
-+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+ SND_SOC_DAIFMT_CBM_CFM) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+ I2S_REG_DIVCMP_CLKEN, 0);
-+ return 0;
-+ }
-+
-+ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
-+ clk = clk / (2 * 2 * width);
-+ divint = clk / rate;
-+ divcomp = ((clk % rate) * 512) / rate;
-+
-+ if ((divint > I2S_REG_DIVINT_MASK) ||
-+ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
-+ return -EINVAL;
-+
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
-+ I2S_REG_DIVINT_MASK, divint);
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
-+
-+ /* enable clock */
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
-+ I2S_REG_DIVCMP_CLKEN);
-+
-+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
-+ clk_get_rate(i2s->clk), rate, divint, divcomp);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned int cfg0 = 0, cfg1 = 0;
-+
-+ /* set master/slave audio interface */
-+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+ case SND_SOC_DAIFMT_CBM_CFM:
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ cfg0 |= I2S_REG_CFG0_SLAVE_EN;
-+ else
-+ cfg0 |= I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBS_CFS:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* interface format */
-+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+ case SND_SOC_DAIFMT_I2S:
-+ break;
-+ case SND_SOC_DAIFMT_RIGHT_J:
-+ if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
-+ cfg1 |= I2S_REG_CFG1_RIGHT_J;
-+ break;
-+ }
-+ return -EINVAL;
-+ case SND_SOC_DAIFMT_LEFT_J:
-+ if (i2s->flags & RALINK_FLAGS_LEFT_J) {
-+ cfg1 |= I2S_REG_CFG1_LEFT_J;
-+ break;
-+ }
-+ return -EINVAL;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* clock inversion */
-+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+ case SND_SOC_DAIFMT_NB_NF:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (i2s->flags & RALINK_FLAGS_TXONLY) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SLAVE_EN, cfg0);
-+ } else {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SLAVE, cfg0);
-+ }
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
-+ I2S_REG_CFG1_FMT_MASK, cfg1);
-+ i2s->fmt = fmt;
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ if (snd_soc_dai_active(dai))
-+ return 0;
-+
-+ /* setup status interrupt */
-+#if (RALINK_I2S_INT_EN)
-+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
-+#else
-+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
-+#endif
-+
-+ /* enable */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+ I2S_REG_CFG0_THRES_MASK,
-+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+ I2S_REG_CFG0_DFT_THRES);
-+
-+ return 0;
-+}
-+
-+static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ /* If both streams are stopped, disable module and clock */
-+ if (snd_soc_dai_active(dai))
-+ return;
-+
-+ /*
-+ * datasheet mention when disable all control regs are cleared
-+ * to initial values. need reinit at startup.
-+ */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
-+}
-+
-+static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ int width;
-+ int ret;
-+
-+ width = params_width(params);
-+ switch (width) {
-+ case 16:
-+ if (i2s->flags & RALINK_FLAGS_24BIT)
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_DATA_24, 0);
-+ break;
-+ case 24:
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_DATA_24,
-+ I2S_REG_CFG0_DATA_24);
-+ break;
-+ }
-+ return -EINVAL;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (params_channels(params)) {
-+ case 2:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+ /* system endian */
-+#ifdef SNDRV_LITTLE_ENDIAN
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SYS_BE, 0);
-+#else
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SYS_BE,
-+ I2S_REG_CFG0_SYS_BE);
-+#endif
-+
-+ /* data endian */
-+ switch (params_format(params)) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ case SNDRV_PCM_FORMAT_S24_LE:
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_FMT_LE,
-+ I2S_REG_CFG0_FMT_LE);
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ case SNDRV_PCM_FORMAT_S24_BE:
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_FMT_LE, 0);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* setup bclk rate */
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
-+ else
-+ ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
-+
-+ return ret;
-+}
-+
-+static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned int mask, val;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ mask = I2S_REG_CFG0_TX_EN;
-+ else
-+ mask = I2S_REG_CFG0_RX_EN;
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ val = mask;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ val = 0;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
-+
-+ return 0;
-+}
-+
-+static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
-+ struct resource *res)
-+{
-+ struct snd_dmaengine_dai_dma_data *dma_data;
-+
-+ /* Playback */
-+ dma_data = &i2s->playback_dma_data;
-+ dma_data->addr = res->start + I2S_REG_WREG;
-+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ dma_data->maxburst = 1;
-+ dma_data->slave_id = i2s->txdma_req;
-+
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ return;
-+
-+ /* Capture */
-+ dma_data = &i2s->capture_dma_data;
-+ dma_data->addr = res->start + I2S_REG_RREG;
-+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ dma_data->maxburst = 1;
-+ dma_data->slave_id = i2s->rxdma_req;
-+}
-+
-+static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
-+ &i2s->capture_dma_data);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
-+{
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
-+ .set_sysclk = ralink_i2s_set_sysclk,
-+ .set_fmt = ralink_i2s_set_fmt,
-+ .startup = ralink_i2s_startup,
-+ .shutdown = ralink_i2s_shutdown,
-+ .hw_params = ralink_i2s_hw_params,
-+ .trigger = ralink_i2s_trigger,
-+};
-+
-+static struct snd_soc_dai_driver ralink_i2s_dai = {
-+ .name = DRV_NAME,
-+ .probe = ralink_i2s_dai_probe,
-+ .remove = ralink_i2s_dai_remove,
-+ .ops = &ralink_i2s_dai_ops,
-+ .capture = {
-+ .stream_name = "I2S Capture",
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rate_min = 5512,
-+ .rate_max = 192000,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ },
-+ .playback = {
-+ .stream_name = "I2S Playback",
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rate_min = 5512,
-+ .rate_max = 192000,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ },
-+ .symmetric_rates = 1,
-+};
-+
-+static struct snd_pcm_hardware ralink_pcm_hardware = {
-+ .info = SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID |
-+ SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .period_bytes_min = PAGE_SIZE,
-+ .period_bytes_max = PAGE_SIZE * 2,
-+ .periods_min = 2,
-+ .periods_max = 128,
-+ .buffer_bytes_max = 128 * 1024,
-+ .fifo_size = RALINK_I2S_FIFO_SIZE,
-+};
-+
-+static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
-+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+ .pcm_hardware = &ralink_pcm_hardware,
-+ .prealloc_buffer_size = 256 * PAGE_SIZE,
-+};
-+
-+static const struct snd_soc_component_driver ralink_i2s_component = {
-+ .name = DRV_NAME,
-+};
-+
-+static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
-+{
-+ return true;
-+}
-+
-+static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
-+{
-+ switch (reg) {
-+ case I2S_REG_INT_STATUS:
-+ case I2S_REG_FF_STATUS:
-+ return true;
-+ }
-+ return false;
-+}
-+
-+static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
-+{
-+ switch (reg) {
-+ case I2S_REG_FF_STATUS:
-+ case I2S_REG_RREG:
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static const struct regmap_config ralink_i2s_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .writeable_reg = ralink_i2s_writeable_reg,
-+ .readable_reg = ralink_i2s_readable_reg,
-+ .volatile_reg = ralink_i2s_volatile_reg,
-+ .max_register = I2S_REG_DIVINT,
-+};
-+
-+#if (RALINK_I2S_INT_EN)
-+static irqreturn_t ralink_i2s_irq(int irq, void *devid)
-+{
-+ struct ralink_i2s *i2s = devid;
-+ u32 status;
-+
-+ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
-+ if (unlikely(!status))
-+ return IRQ_NONE;
-+
-+ /* tx stats */
-+ if (status & I2S_REG_INT_TX_MASK) {
-+ if (status & I2S_REG_INT_TX_THRES)
-+ i2s->txstats.belowthres++;
-+ if (status & I2S_REG_INT_TX_UNRUN)
-+ i2s->txstats.underrun++;
-+ if (status & I2S_REG_INT_TX_OVRUN)
-+ i2s->txstats.overrun++;
-+ if (status & I2S_REG_INT_TX_FAULT)
-+ i2s->txstats.dmafault++;
-+ }
-+
-+ /* rx stats */
-+ if (status & I2S_REG_INT_RX_MASK) {
-+ if (status & I2S_REG_INT_RX_THRES)
-+ i2s->rxstats.belowthres++;
-+ if (status & I2S_REG_INT_RX_UNRUN)
-+ i2s->rxstats.underrun++;
-+ if (status & I2S_REG_INT_RX_OVRUN)
-+ i2s->rxstats.overrun++;
-+ if (status & I2S_REG_INT_RX_FAULT)
-+ i2s->rxstats.dmafault++;
-+ }
-+
-+ /* clean status bits */
-+ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+#if IS_ENABLED(CONFIG_DEBUG_FS)
-+static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
-+{
-+ struct ralink_i2s *i2s = s->private;
-+
-+ seq_printf(s, "tx stats\n");
-+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
-+ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
-+ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
-+ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
-+
-+ seq_printf(s, "rx stats\n");
-+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
-+ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
-+ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
-+ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
-+
-+ ralink_i2s_dump_regs(i2s);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, ralink_i2s_stats_show, inode->i_private);
-+}
-+
-+static const struct file_operations ralink_i2s_stats_ops = {
-+ .open = ralink_i2s_stats_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
-+ if (!i2s->dbg_dir)
-+ return -ENOMEM;
-+
-+ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
-+ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
-+ if (!i2s->dbg_stats) {
-+ debugfs_remove(i2s->dbg_dir);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
-+{
-+ debugfs_remove(i2s->dbg_stats);
-+ debugfs_remove(i2s->dbg_dir);
-+}
-+#else
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+ return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg)
-+{
-+}
-+#endif
-+
-+/*
-+ * TODO: these refclk setup functions should use
-+ * clock framework instead. hardcode it now.
-+ */
-+static void rt3350_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data |= (0x1 << 8);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3883_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x3 << 13);
-+ data |= (0x1 << 13);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3552_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0xf << 8);
-+ data |= (0x3 << 8);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7620_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x7 << 9);
-+ data |= 0x1 << 9;
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7621_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x1f << 18);
-+ data |= (0x19 << 18);
-+ data &= ~(0x1f << 12);
-+ data |= (0x1 << 12);
-+ data &= ~(0x7 << 9);
-+ data |= (0x5 << 9);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7628_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set i2s and refclk digital pad */
-+ data = rt_sysc_r32(0x3c);
-+ data |= 0x1f;
-+ rt_sysc_w32(data, 0x3c);
-+
-+ /* Adjust REFCLK0's driving strength */
-+ data = rt_sysc_r32(0x1354);
-+ data &= ~(0x1 << 5);
-+ rt_sysc_w32(data, 0x1354);
-+ data = rt_sysc_r32(0x1364);
-+ data |= ~(0x1 << 5);
-+ rt_sysc_w32(data, 0x1364);
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x7 << 9);
-+ data |= 0x1 << 9;
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+struct rt_i2s_data {
-+ u32 flags;
-+ void (*refclk_setup)(void);
-+};
-+
-+struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
-+struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
-+ .refclk_setup = rt3350_refclk_setup };
-+struct rt_i2s_data rt3883_i2s_data = {
-+ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
-+ .refclk_setup = rt3883_refclk_setup };
-+struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
-+struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
-+struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
-+struct rt_i2s_data mt7628_i2s_data = {
-+ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
-+ RALINK_FLAGS_LEFT_J),
-+ .refclk_setup = mt7628_refclk_setup};
-+
-+static const struct of_device_id ralink_i2s_match_table[] = {
-+ { .compatible = "ralink,rt3050-i2s",
-+ .data = (void *)&rt3050_i2s_data },
-+ { .compatible = "ralink,rt3350-i2s",
-+ .data = (void *)&rt3350_i2s_data },
-+ { .compatible = "ralink,rt3883-i2s",
-+ .data = (void *)&rt3883_i2s_data },
-+ { .compatible = "ralink,rt3352-i2s",
-+ .data = (void *)&rt3352_i2s_data },
-+ { .compatible = "mediatek,mt7620-i2s",
-+ .data = (void *)&mt7620_i2s_data },
-+ { .compatible = "mediatek,mt7621-i2s",
-+ .data = (void *)&mt7621_i2s_data },
-+ { .compatible = "mediatek,mt7628-i2s",
-+ .data = (void *)&mt7628_i2s_data },
-+};
-+MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
-+
-+static int ralink_i2s_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct ralink_i2s *i2s;
-+ struct resource *res;
-+ int irq, ret;
-+ u32 dma_req;
-+ struct rt_i2s_data *data;
-+
-+ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
-+ if (!i2s)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, i2s);
-+ i2s->dev = &pdev->dev;
-+
-+ match = of_match_device(ralink_i2s_match_table, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+ data = (struct rt_i2s_data *)match->data;
-+ i2s->flags = data->flags;
-+ /* setup out 12Mhz refclk to codec as mclk */
-+ if (data->refclk_setup)
-+ data->refclk_setup();
-+
-+ if (of_property_read_u32(np, "txdma-req", &dma_req)) {
-+ dev_err(&pdev->dev, "no txdma-req define\n");
-+ return -EINVAL;
-+ }
-+ i2s->txdma_req = (u16)dma_req;
-+ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
-+ if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
-+ dev_err(&pdev->dev, "no rxdma-req define\n");
-+ return -EINVAL;
-+ }
-+ i2s->rxdma_req = (u16)dma_req;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ i2s->regs = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(i2s->regs))
-+ return PTR_ERR(i2s->regs);
-+
-+ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
-+ &ralink_i2s_regmap_config);
-+ if (IS_ERR(i2s->regmap)) {
-+ dev_err(&pdev->dev, "regmap init failed\n");
-+ return PTR_ERR(i2s->regmap);
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+
-+#if (RALINK_I2S_INT_EN)
-+ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
-+ 0, dev_name(&pdev->dev), i2s);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return ret;
-+ }
-+#endif
-+
-+ i2s->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(i2s->clk)) {
-+ dev_err(&pdev->dev, "no clock defined\n");
-+ return PTR_ERR(i2s->clk);
-+ }
-+
-+ ret = clk_prepare_enable(i2s->clk);
-+ if (ret)
-+ return ret;
-+
-+ ralink_i2s_init_dma_data(i2s, res);
-+
-+ device_reset(&pdev->dev);
-+
-+ ret = ralink_i2s_debugfs_create(i2s);
-+ if (ret) {
-+ dev_err(&pdev->dev, "create debugfs failed\n");
-+ goto err_clk_disable;
-+ }
-+
-+ /* enable 24bits support */
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+ }
-+
-+ /* enable big endian support */
-+ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ ralink_i2s_dai.capture.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ ralink_i2s_dai.playback.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ ralink_pcm_hardware.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ }
-+ }
-+
-+ /* disable capture support */
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
-+ 0);
-+
-+ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
-+ &ralink_i2s_dai, 1);
-+ if (ret)
-+ goto err_debugfs;
-+
-+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
-+ &ralink_dmaengine_pcm_config,
-+ SND_DMAENGINE_PCM_FLAG_COMPAT);
-+ if (ret)
-+ goto err_debugfs;
-+
-+ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000);
-+
-+ return 0;
-+
-+err_debugfs:
-+ ralink_i2s_debugfs_remove(i2s);
-+
-+err_clk_disable:
-+ clk_disable_unprepare(i2s->clk);
-+
-+ return ret;
-+}
-+
-+static int ralink_i2s_remove(struct platform_device *pdev)
-+{
-+ struct ralink_i2s *i2s = platform_get_drvdata(pdev);
-+
-+ ralink_i2s_debugfs_remove(i2s);
-+ clk_disable_unprepare(i2s->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ralink_i2s_driver = {
-+ .probe = ralink_i2s_probe,
-+ .remove = ralink_i2s_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .of_match_table = ralink_i2s_match_table,
-+ },
-+};
-+module_platform_driver(ralink_i2s_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" DRV_NAME);
+++ /dev/null
-From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:31:08 +0100
-Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/serial_core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -418,6 +418,9 @@ uart_get_baud_rate(struct uart_port *por
- break;
- }
-
-+ if (tty_termios_baud_rate(termios) == 2500000)
-+ return 250000;
-+
- for (try = 0; try < 2; try++) {
- baud = tty_termios_baud_rate(termios);
-
+++ /dev/null
-From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:16:50 +0100
-Subject: [PATCH 52/53] pwm: add mediatek support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pwm/Kconfig | 9 +++
- drivers/pwm/Makefile | 1 +
- drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 183 insertions(+)
- create mode 100644 drivers/pwm/pwm-mediatek.c
-
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -339,6 +339,15 @@ config PWM_MEDIATEK
- To compile this driver as a module, choose M here: the module
- will be called pwm-mediatek.
-
-+config PWM_MEDIATEK_RAMIPS
-+ tristate "Mediatek PWM support"
-+ depends on RALINK && OF
-+ help
-+ Generic PWM framework driver for Mediatek ARM SoC.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called pwm-mxs.
-+
- config PWM_MXS
- tristate "Freescale MXS PWM support"
- depends on OF
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
- obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
- obj-$(CONFIG_PWM_MESON) += pwm-meson.o
- obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
-+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
- obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
- obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
- obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
---- /dev/null
-+++ b/drivers/pwm/pwm-mediatek-ramips.c
-@@ -0,0 +1,173 @@
-+/*
-+ * Mediatek Pulse Width Modulator driver
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pwm.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#define NUM_PWM 4
-+
-+/* PWM registers and bits definitions */
-+#define PWMCON 0x00
-+#define PWMHDUR 0x04
-+#define PWMLDUR 0x08
-+#define PWMGDUR 0x0c
-+#define PWMWAVENUM 0x28
-+#define PWMDWIDTH 0x2c
-+#define PWMTHRES 0x30
-+
-+/**
-+ * struct mtk_pwm_chip - struct representing pwm chip
-+ *
-+ * @mmio_base: base address of pwm chip
-+ * @chip: linux pwm chip representation
-+ */
-+struct mtk_pwm_chip {
-+ void __iomem *mmio_base;
-+ struct pwm_chip chip;
-+};
-+
-+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mtk_pwm_chip, chip);
-+}
-+
-+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
-+ unsigned long offset)
-+{
-+ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
-+ unsigned int num, unsigned long offset,
-+ unsigned long val)
-+{
-+ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+ int duty_ns, int period_ns)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 resolution = 100 / 4;
-+ u32 clkdiv = 0;
-+
-+ while (period_ns / resolution > 8191) {
-+ clkdiv++;
-+ resolution *= 2;
-+ }
-+
-+ if (clkdiv > 7)
-+ return -1;
-+
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
-+ return 0;
-+}
-+
-+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val |= BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+
-+ return 0;
-+}
-+
-+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val &= ~BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+}
-+
-+static const struct pwm_ops mtk_pwm_ops = {
-+ .config = mtk_pwm_config,
-+ .enable = mtk_pwm_enable,
-+ .disable = mtk_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_pwm_probe(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc;
-+ struct resource *r;
-+ int ret;
-+
-+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-+ if (!pc)
-+ return -ENOMEM;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(pc->mmio_base))
-+ return PTR_ERR(pc->mmio_base);
-+
-+ platform_set_drvdata(pdev, pc);
-+
-+ pc->chip.dev = &pdev->dev;
-+ pc->chip.ops = &mtk_pwm_ops;
-+ pc->chip.base = -1;
-+ pc->chip.npwm = NUM_PWM;
-+
-+ ret = pwmchip_add(&pc->chip);
-+ if (ret < 0)
-+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-+
-+ return ret;
-+}
-+
-+static int mtk_pwm_remove(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < NUM_PWM; i++)
-+ pwm_disable(&pc->chip.pwms[i]);
-+
-+ return pwmchip_remove(&pc->chip);
-+}
-+
-+static const struct of_device_id mtk_pwm_of_match[] = {
-+ { .compatible = "mediatek,mt7628-pwm" },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
-+
-+static struct platform_driver mtk_pwm_driver = {
-+ .driver = {
-+ .name = "mtk-pwm",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mtk_pwm_of_match,
-+ },
-+ .probe = mtk_pwm_probe,
-+ .remove = mtk_pwm_remove,
-+};
-+
-+module_platform_driver(mtk_pwm_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_ALIAS("platform:mtk-pwm");
+++ /dev/null
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -477,6 +477,12 @@ static int dwc2_driver_probe(struct plat
- if (retval)
- return retval;
-
-+ /* Enable USB port before any regs access */
-+ if (readl(hsotg->regs + PCGCTL) & 0x0f) {
-+ writel(0x00, hsotg->regs + PCGCTL);
-+ /* TODO: mdelay(25) here? vendor driver don't use it */
-+ }
-+
- hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
-
- retval = dwc2_get_dr_mode(hsotg);
+++ /dev/null
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_GENWQE) += genwqe/
- obj-$(CONFIG_ECHO) += echo/
- obj-$(CONFIG_CXL_BASE) += cxl/
- obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
-+obj-$(CONFIG_SOC_MT7620) += linkit.o
- obj-$(CONFIG_OCXL) += ocxl/
- obj-y += cardreader/
- obj-$(CONFIG_PVPANIC) += pvpanic.o
---- /dev/null
-+++ b/drivers/misc/linkit.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/gpio.h>
-+
-+#define LINKIT_LATCH_GPIO 11
-+
-+struct linkit_hw_data {
-+ char board[16];
-+ char rev[16];
-+};
-+
-+static void sanify_string(char *s)
-+{
-+ int i;
-+
-+ for (i = 0; i < 15; i++)
-+ if (s[i] <= 0x20)
-+ s[i] = '\0';
-+ s[15] = '\0';
-+}
-+
-+static int linkit_probe(struct platform_device *pdev)
-+{
-+ struct linkit_hw_data hw;
-+ struct mtd_info *mtd;
-+ size_t retlen;
-+ int ret;
-+
-+ mtd = get_mtd_device_nm("factory");
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
-+ put_mtd_device(mtd);
-+
-+ sanify_string(hw.board);
-+ sanify_string(hw.rev);
-+
-+ dev_info(&pdev->dev, "Version : %s\n", hw.board);
-+ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
-+
-+ if (!strcmp(hw.board, "LINKITS7688")) {
-+ dev_info(&pdev->dev, "setting up bootstrap latch\n");
-+
-+ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
-+ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
-+ return -1;
-+ }
-+ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id linkit_match[] = {
-+ { .compatible = "mediatek,linkit" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, linkit_match);
-+
-+static struct platform_driver linkit_driver = {
-+ .probe = linkit_probe,
-+ .driver = {
-+ .name = "mtk-linkit",
-+ .owner = THIS_MODULE,
-+ .of_match_table = linkit_match,
-+ },
-+};
-+
-+int __init linkit_init(void)
-+{
-+ return platform_driver_register(&linkit_driver);
-+}
-+late_initcall_sync(linkit_init);
+++ /dev/null
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT2880_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT2880=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-CONFIG_SOC_RT288X=y
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB=m
-CONFIG_USB_COMMON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
+++ /dev/null
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT305X_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_ESW_RT3050=y
-CONFIG_NET_RALINK_RT3050=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-CONFIG_SOC_RT305X=y
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
+++ /dev/null
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT3883_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ=250
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT3883=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-CONFIG_SOC_RT3883=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
projects / openwrt / openwrt.git / commitdiff