6in4: remove old network scripts
authorFelix Fietkau <nbd@openwrt.org>
Tue, 29 May 2012 12:59:07 +0000 (12:59 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 29 May 2012 12:59:07 +0000 (12:59 +0000)
SVN-Revision: 31981

package/6in4/Makefile
package/6in4/files.old/6in4.hotplug [deleted file]
package/6in4/files.old/6in4.sh [deleted file]

index c2fcc3ba1c6578af6692da3e35372fee28393780..60c1bcc2acdb4decc6cf47a1435c37764d4f71c6 100644 (file)
@@ -11,8 +11,6 @@ PKG_NAME:=6in4
 PKG_VERSION:=10
 PKG_RELEASE:=1
 
-PKG_CONFIG_DEPENDS:=CONFIG_PACKAGE_netifd
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/6in4
@@ -36,20 +34,11 @@ endef
 define Build/Configure
 endef
 
-ifneq ($(CONFIG_PACKAGE_netifd),)
-  define Package/6in4/install
+define Package/6in4/install
        $(INSTALL_DIR) $(1)/lib/netifd/proto
        $(INSTALL_BIN) ./files/6in4.sh $(1)/lib/netifd/proto/6in4.sh
        $(INSTALL_DIR) $(1)/etc/hotplug.d/iface
        $(INSTALL_DATA) ./files/6in4.hotplug $(1)/etc/hotplug.d/iface/90-6in4
-  endef
-else
-  define Package/6in4/install
-       $(INSTALL_DIR) $(1)/lib/network
-       $(INSTALL_DATA) ./files.old/6in4.sh $(1)/lib/network/6in4.sh
-       $(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-       $(INSTALL_DATA) ./files.old/6in4.hotplug $(1)/etc/hotplug.d/iface/90-6in4
-  endef
-endif
+endef
 
 $(eval $(call BuildPackage,6in4))
diff --git a/package/6in4/files.old/6in4.hotplug b/package/6in4/files.old/6in4.hotplug
deleted file mode 100644 (file)
index 3d9def4..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/bin/sh
-
-if [ "$ACTION" = ifup ]; then
-       . /etc/functions.sh
-
-       include /lib/network
-       scan_interfaces
-
-       update_tunnel() {
-               local cfg="$1"
-
-               local proto
-               config_get proto "$cfg" proto
-               [ "$proto" = 6in4 ] || return 0
-
-               local wandev
-               config_get wandev "$cfg" wan_device "$(find_6in4_wanif)"
-               [ "$wandev" = "$DEVICE" ] || return 0
-
-               local wanip=$(find_6in4_wanip "$wandev")
-
-               [ -n "$wanip" ] && {
-                       lsmod | grep -q ^sit || {
-                               logger -t 6in4-update "Tunneling driver not loaded yet, deferring action"
-                               exit 0
-                       }
-
-                       local tunnelid
-                       config_get tunnelid "$cfg" tunnelid
-
-                       local username
-                       config_get username "$cfg" username
-
-                       local password
-                       config_get password "$cfg" password
-
-                       uci_set_state network "$cfg" ipaddr "$wanip"
-
-                       [ -n "$tunnelid" ] && [ -n "$username" ] && [ -n "$password" ] && {
-                               [ "${#password}" == 32 -a -z "${password//[a-fA-F0-9]/}" ] || {
-                                       password="$(echo -n "$password" | md5sum)"; password="${password%% *}"
-                               }
-
-                               (
-                                       local url="http://ipv4.tunnelbroker.net/ipv4_end.php?ip=AUTO&apikey=$username&pass=$password&tid=$tunnelid"
-                                       local try=0
-                                       local max=3
-
-                                       while [ $((++try)) -le $max ]; do
-                                               wget -qO/dev/null "$url" 2>/dev/null && {
-                                                       logger -t 6in4-update "Updated tunnel #$tunnelid endpoint to $wanip"
-                                                       ifup "$cfg"
-                                                       break
-                                               } || {
-                                                       logger -t 6in4-update "Try $try/$max failed, retrying"
-                                                       sleep 1
-                                               }
-                                       done
-                               )&
-                       } || {
-                               logger -t 6in4-update "Re-establishing tunnel due to change on $INTERFACE ($DEVICE)"
-                               ifup "$cfg" &
-                       }
-               }
-       }
-
-       config_foreach update_tunnel interface
-fi
diff --git a/package/6in4/files.old/6in4.sh b/package/6in4/files.old/6in4.sh
deleted file mode 100755 (executable)
index 5f8dfff..0000000
+++ /dev/null
@@ -1,104 +0,0 @@
-# 6in4.sh - IPv6-in-IPv4 tunnel backend
-# Copyright (c) 2010 OpenWrt.org
-
-find_6in4_wanif() {
-       local if=$(ip -4 r l e 0.0.0.0/0); if="${if#default* dev }"; if="${if%% *}"
-       [ -n "$if" ] && grep -qs "^ *$if:" /proc/net/dev && echo "$if"
-}
-
-find_6in4_wanip() {
-       local ip=$(ip -4 a s dev "$1"); ip="${ip#*inet }"
-       echo "${ip%%[^0-9.]*}"
-}
-
-# Hook into scan_interfaces() to synthesize a .device option
-# This is needed for /sbin/ifup to properly dispatch control
-# to setup_interface_6in4() even if no .ifname is set in
-# the configuration.
-scan_6in4() {
-       config_set "$1" device "6in4-$1"
-}
-
-coldplug_interface_6in4() {
-       setup_interface_6in4 "6in4-$1" "$1"
-}
-
-setup_interface_6in4() {
-       local iface="$1"
-       local cfg="$2"
-       local link="6in4-$cfg"
-
-       local local4=$(uci_get network "$cfg" ipaddr)
-
-       local remote4
-       config_get remote4 "$cfg" peeraddr
-
-       local local6
-       config_get local6 "$cfg" ip6addr
-
-       local mtu
-       config_get mtu "$cfg" mtu
-
-       local ttl
-       config_get ttl "$cfg" ttl
-
-       local metric
-       config_get metric "$cfg" metric
-
-       local defaultroute
-       config_get_bool defaultroute "$cfg" defaultroute 1
-
-       # If local4 is unset, guess local IPv4 address from the
-       # interface used by the default route.
-       [ -z "$local4" ] && {
-               local wanif=$(find_6in4_wanif)
-               [ -n "$wanif" ] && {
-                       local4=$(find_6in4_wanip "$wanif")
-                       uci_set_state network "$cfg" wan_device "$wanif"
-               }
-       }
-
-       [ -n "$local4" ] && {
-               # creating the tunnel below will trigger a net subsystem event
-               # prevent it from touching or iface by disabling .auto here
-               uci_set_state network "$cfg" ifname $link
-               uci_set_state network "$cfg" auto 0
-
-               ip tunnel add $link mode sit remote $remote4 local $local4 ttl ${ttl:-64}
-               ip link set $link up
-               ip link set mtu ${mtu:-1280} dev $link
-               ip addr add $local6 dev $link
-
-               uci_set_state network "$cfg" ipaddr $local4
-               uci_set_state network "$cfg" ip6addr $local6
-
-               [ "$defaultroute" = 1 ] && {
-                       ip -6 route add ::/0 ${metric:+metric $metric} dev $link
-                       uci_set_state network "$cfg" defaultroute 1
-               }
-
-               env -i ACTION="ifup" INTERFACE="$cfg" DEVICE="$link" PROTO=6in4 /sbin/hotplug-call "iface" &
-       } || {
-               echo "Cannot determine local IPv4 address for 6in4 tunnel $cfg - skipping"
-       }
-}
-
-stop_interface_6in4() {
-       local cfg="$1"
-       local link="6in4-$cfg"
-
-       local local6=$(uci_get_state network "$cfg" ip6addr)
-       local defaultroute=$(uci_get_state network "$cfg" defaultroute)
-
-       grep -qs "^ *$link:" /proc/net/dev && {
-               env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$link" PROTO=6in4 /sbin/hotplug-call "iface" &
-
-               [ "$defaultroute" = "1" ] && {
-                       ip -6 route del ::/0 dev $link
-               }
-
-               ip addr del $local6 dev $link
-               ip link set $link down
-               ip tunnel del $link
-       }
-}