---
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1094,6 +1094,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc,
+@@ -1038,6 +1038,8 @@ int ath9k_init_device(u16 devid, struct
ARRAY_SIZE(ath9k_tpt_blink));
#endif
/* Register with mac80211 */
error = ieee80211_register_hw(hw);
if (error)
-
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1120,25 +1120,25 @@ static int __init ath9k_init(void)
+@@ -1122,25 +1122,25 @@ static int __init ath9k_init(void)
{
int error;
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
-@@ -1037,6 +1050,8 @@ int ath9k_init_device(u16 devid, struct
- ARRAY_SIZE(ath9k_tpt_blink));
- #endif
+@@ -1039,6 +1052,8 @@ int ath9k_init_device(u16 devid, struct
+
+ wiphy_read_of_freq_limits(hw->wiphy);
+ ath_get_initial_entropy(sc);
+
static int ath_ahb_probe(struct platform_device *pdev)
{
void __iomem *mem;
-@@ -80,6 +324,17 @@ static int ath_ahb_probe(struct platform
+@@ -80,6 +318,17 @@ static int ath_ahb_probe(struct platform
int ret = 0;
struct ath_hw *ah;
char hw_name[64];
if (!dev_get_platdata(&pdev->dev)) {
dev_err(&pdev->dev, "no platform data specified\n");
-@@ -122,13 +377,16 @@ static int ath_ahb_probe(struct platform
+@@ -122,13 +371,16 @@ static int ath_ahb_probe(struct platform
sc->mem = mem;
sc->irq = irq;
if (ret) {
dev_err(&pdev->dev, "failed to initialize device\n");
goto err_irq;
-@@ -159,6 +417,9 @@ static int ath_ahb_remove(struct platfor
+@@ -159,6 +411,9 @@ static int ath_ahb_remove(struct platfor
free_irq(sc->irq, sc);
ieee80211_free_hw(sc->hw);
}
return 0;
}
-@@ -168,6 +429,9 @@ static struct platform_driver ath_ahb_dr
+@@ -168,6 +423,9 @@ static struct platform_driver ath_ahb_dr
.remove = ath_ahb_remove,
.driver = {
.name = "ath9k",
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -650,6 +650,12 @@ static int ath9k_of_init(struct ath_soft
+@@ -644,6 +644,12 @@ static int ath9k_of_init(struct ath_soft
return 0;
}
static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
-@@ -753,6 +759,9 @@ static int ath9k_init_softc(u16 devid, s
+@@ -747,6 +753,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
goto err_hw;
--- /dev/null
+From dab16ef495dbb3cabb355b6c80f0771a4a25e35d Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Fri, 20 Aug 2021 22:44:52 +0200
+Subject: [PATCH] ath9k: fetch calibration data via nvmem subsystem
+
+On most embedded ath9k devices (like range extenders,
+routers, accesspoints, ...) the calibration data is
+stored in a MTD partitions named "ART", or "caldata"/
+"calibration".
+
+Ever since commit
+4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
+all MTD partitions are all automatically available through
+the nvmem subsystem. This allows drivers like ath9k to read
+the necessary data without needing any userspace helpers
+that would do this extraction.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+
+includes:
+
+From 57671351379b2051cfb07fc14e0bead9916a0880 Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter@oracle.com>
+Date: Mon, 11 Oct 2021 18:18:01 +0300
+Subject: ath9k: fix an IS_ERR() vs NULL check
+
+The devm_kmemdup() function doesn't return error pointers, it returns
+NULL on error.
+
+Fixes: eb3a97a69be8 ("ath9k: fetch calibration data via nvmem subsystem")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+Link: https://lore.kernel.org/r/20211011123533.GA15188@kili
+
+---
+
+--- a/drivers/net/wireless/ath/ath9k/eeprom.c
++++ b/drivers/net/wireless/ath/ath9k/eeprom.c
+@@ -135,13 +135,23 @@ static bool ath9k_hw_nvram_read_firmware
+ offset, data);
+ }
+
++static bool ath9k_hw_nvram_read_nvmem(struct ath_hw *ah, off_t offset,
++ u16 *data)
++{
++ return ath9k_hw_nvram_read_array(ah->nvmem_blob,
++ ah->nvmem_blob_len / sizeof(u16),
++ offset, data);
++}
++
+ bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
+ {
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_platform_data *pdata = ah->dev->platform_data;
+ bool ret;
+
+- if (ah->eeprom_blob)
++ if (ah->nvmem_blob)
++ ret = ath9k_hw_nvram_read_nvmem(ah, off, data);
++ else if (ah->eeprom_blob)
+ ret = ath9k_hw_nvram_read_firmware(ah->eeprom_blob, off, data);
+ else if (pdata && !pdata->use_eeprom)
+ ret = ath9k_hw_nvram_read_pdata(pdata, off, data);
+--- a/drivers/net/wireless/ath/ath9k/hw.h
++++ b/drivers/net/wireless/ath/ath9k/hw.h
+@@ -988,6 +988,8 @@ struct ath_hw {
+ bool disable_5ghz;
+
+ const struct firmware *eeprom_blob;
++ u16 *nvmem_blob; /* devres managed */
++ size_t nvmem_blob_len;
+
+ struct ath_dynack dynack;
+
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -22,6 +22,7 @@
+ #include <linux/module.h>
+ #include <linux/of.h>
+ #include <linux/of_net.h>
++#include <linux/nvmem-consumer.h>
+ #include <linux/relay.h>
+ #include <linux/dmi.h>
+ #include <net/ieee80211_radiotap.h>
+@@ -568,6 +569,57 @@ static void ath9k_eeprom_release(struct
+ release_firmware(sc->sc_ah->eeprom_blob);
+ }
+
++static int ath9k_nvmem_request_eeprom(struct ath_softc *sc)
++{
++ struct ath_hw *ah = sc->sc_ah;
++ struct nvmem_cell *cell;
++ void *buf;
++ size_t len;
++ int err;
++
++ cell = devm_nvmem_cell_get(sc->dev, "calibration");
++ if (IS_ERR(cell)) {
++ err = PTR_ERR(cell);
++
++ /* nvmem cell might not be defined, or the nvmem
++ * subsystem isn't included. In this case, follow
++ * the established "just return 0;" convention of
++ * ath9k_init_platform to say:
++ * "All good. Nothing to see here. Please go on."
++ */
++ if (err == -ENOENT || err == -EOPNOTSUPP)
++ return 0;
++
++ return err;
++ }
++
++ buf = nvmem_cell_read(cell, &len);
++ if (IS_ERR(buf))
++ return PTR_ERR(buf);
++
++ /* run basic sanity checks on the returned nvram cell length.
++ * That length has to be a multiple of a "u16" (i.e.: & 1).
++ * Furthermore, it has to be more than "let's say" 512 bytes
++ * but less than the maximum of AR9300_EEPROM_SIZE (16kb).
++ */
++ if (((len & 1) == 1) || (len < 512) || (len >= AR9300_EEPROM_SIZE)) {
++ kfree(buf);
++ return -EINVAL;
++ }
++
++ /* devres manages the calibration values release on shutdown */
++ ah->nvmem_blob = (u16 *)devm_kmemdup(sc->dev, buf, len, GFP_KERNEL);
++ kfree(buf);
++ if (!ah->nvmem_blob)
++ return -ENOMEM;
++
++ ah->nvmem_blob_len = len;
++ ah->ah_flags &= ~AH_USE_EEPROM;
++ ah->ah_flags |= AH_NO_EEP_SWAP;
++
++ return 0;
++}
++
+ static int ath9k_init_platform(struct ath_softc *sc)
+ {
+ struct ath9k_platform_data *pdata = sc->dev->platform_data;
+@@ -710,6 +762,10 @@ static int ath9k_init_softc(u16 devid, s
+ if (ret)
+ return ret;
+
++ ret = ath9k_nvmem_request_eeprom(sc);
++ if (ret)
++ return ret;
++
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
--- /dev/null
+From 9bf31835f11aa3c4fe5a9c1f7462c199c5d8e7ca Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 21 Aug 2021 00:22:39 +0200
+Subject: [PATCH] ath9k: owl-loader: fetch pci init values through nvmem
+
+extends the owl loader to fetch important pci initialization
+values - which are stored together with the calibration data -
+through the nvmem subsystem.
+
+This allows for much faster WIFI/ath9k initializations on devices
+that do not require to perform any post-processing (like XOR'ing/
+reversal or unpacking) since no userspace helper is required.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ .../wireless/ath/ath9k/ath9k_pci_owl_loader.c | 105 +++++++++++++-----
+ 1 file changed, 76 insertions(+), 29 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
++++ b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
+@@ -19,9 +19,14 @@
+ #include <linux/delay.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/nvmem-consumer.h>
++#include <linux/workqueue.h>
+
+ struct owl_ctx {
++ struct pci_dev *pdev;
+ struct completion eeprom_load;
++ struct work_struct work;
++ struct nvmem_cell *cell;
+ };
+
+ #define EEPROM_FILENAME_LEN 100
+@@ -42,6 +47,12 @@ static int ath9k_pci_fixup(struct pci_de
+ u32 bar0;
+ bool swap_needed = false;
+
++ /* also note that we are doing *u16 operations on the file */
++ if (cal_len > 4096 || cal_len < 0x200 || (cal_len & 1) == 1) {
++ dev_err(&pdev->dev, "eeprom has an invalid size.\n");
++ return -EINVAL;
++ }
++
+ if (*cal_data != AR5416_EEPROM_MAGIC) {
+ if (*cal_data != swab16(AR5416_EEPROM_MAGIC)) {
+ dev_err(&pdev->dev, "invalid calibration data\n");
+@@ -99,38 +110,31 @@ static int ath9k_pci_fixup(struct pci_de
+ return 0;
+ }
+
+-static void owl_fw_cb(const struct firmware *fw, void *context)
++static void owl_rescan(struct pci_dev *pdev)
+ {
+- struct pci_dev *pdev = (struct pci_dev *)context;
+- struct owl_ctx *ctx = (struct owl_ctx *)pci_get_drvdata(pdev);
+- struct pci_bus *bus;
+-
+- complete(&ctx->eeprom_load);
+-
+- if (!fw) {
+- dev_err(&pdev->dev, "no eeprom data received.\n");
+- goto release;
+- }
+-
+- /* also note that we are doing *u16 operations on the file */
+- if (fw->size > 4096 || fw->size < 0x200 || (fw->size & 1) == 1) {
+- dev_err(&pdev->dev, "eeprom file has an invalid size.\n");
+- goto release;
+- }
+-
+- if (ath9k_pci_fixup(pdev, (const u16 *)fw->data, fw->size))
+- goto release;
++ struct pci_bus *bus = pdev->bus;
+
+ pci_lock_rescan_remove();
+- bus = pdev->bus;
+ pci_stop_and_remove_bus_device(pdev);
+ /* the device should come back with the proper
+ * ProductId. But we have to initiate a rescan.
+ */
+ pci_rescan_bus(bus);
+ pci_unlock_rescan_remove();
++}
++
++static void owl_fw_cb(const struct firmware *fw, void *context)
++{
++ struct owl_ctx *ctx = (struct owl_ctx *)context;
++
++ complete(&ctx->eeprom_load);
+
+-release:
++ if (fw) {
++ ath9k_pci_fixup(ctx->pdev, (const u16 *)fw->data, fw->size);
++ owl_rescan(ctx->pdev);
++ } else {
++ dev_err(&ctx->pdev->dev, "no eeprom data received.\n");
++ }
+ release_firmware(fw);
+ }
+
+@@ -152,6 +156,43 @@ static const char *owl_get_eeprom_name(s
+ return eeprom_name;
+ }
+
++static void owl_nvmem_work(struct work_struct *work)
++{
++ struct owl_ctx *ctx = container_of(work, struct owl_ctx, work);
++ void *buf;
++ size_t len;
++
++ complete(&ctx->eeprom_load);
++
++ buf = nvmem_cell_read(ctx->cell, &len);
++ if (!IS_ERR(buf)) {
++ ath9k_pci_fixup(ctx->pdev, buf, len);
++ kfree(buf);
++ owl_rescan(ctx->pdev);
++ } else {
++ dev_err(&ctx->pdev->dev, "no nvmem data received.\n");
++ }
++}
++
++static int owl_nvmem_probe(struct owl_ctx *ctx)
++{
++ int err;
++
++ ctx->cell = devm_nvmem_cell_get(&ctx->pdev->dev, "calibration");
++ if (IS_ERR(ctx->cell)) {
++ err = PTR_ERR(ctx->cell);
++ if (err == -ENOENT || err == -EOPNOTSUPP)
++ return 1; /* not present, try firmware_request */
++
++ return err;
++ }
++
++ INIT_WORK(&ctx->work, owl_nvmem_work);
++ schedule_work(&ctx->work);
++
++ return 0;
++}
++
+ static int owl_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+ {
+@@ -164,21 +205,27 @@ static int owl_probe(struct pci_dev *pde
+
+ pcim_pin_device(pdev);
+
+- eeprom_name = owl_get_eeprom_name(pdev);
+- if (!eeprom_name) {
+- dev_err(&pdev->dev, "no eeprom filename found.\n");
+- return -ENODEV;
+- }
+-
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_completion(&ctx->eeprom_load);
++ ctx->pdev = pdev;
+
+ pci_set_drvdata(pdev, ctx);
++
++ err = owl_nvmem_probe(ctx);
++ if (err <= 0)
++ return err;
++
++ eeprom_name = owl_get_eeprom_name(pdev);
++ if (!eeprom_name) {
++ dev_err(&pdev->dev, "no eeprom filename found.\n");
++ return -ENODEV;
++ }
++
+ err = request_firmware_nowait(THIS_MODULE, true, eeprom_name,
+- &pdev->dev, GFP_KERNEL, pdev, owl_fw_cb);
++ &pdev->dev, GFP_KERNEL, ctx, owl_fw_cb);
+ if (err)
+ dev_err(&pdev->dev, "failed to request caldata (%d).\n", err);
+
projects / openwrt / openwrt.git / commitdiff