add support for the NC-LINK SMART-300
authorImre Kaloz <kaloz@openwrt.org>
Mon, 11 Aug 2014 11:44:51 +0000 (11:44 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Mon, 11 Aug 2014 11:44:51 +0000 (11:44 +0000)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 42130

13 files changed:
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.10
target/linux/ar71xx/config-3.14
target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/nclink.mk [new file with mode: 0644]
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch [new file with mode: 0644]

index 2984777d9d5ad2b3a4852932987230a7c6f0efd1..1864b11a2775668e653660ae65ec733161696d08 100755 (executable)
@@ -160,6 +160,9 @@ get_status_led() {
        rw2458n)
                status_led="rw2458n:green:d3"
                ;;
+       smart-300)
+               status_led="nc-link:green:system"
+               ;;
        oolite)
                status_led="oolite:red:system"
                ;;
index a93b5faeedbea8a52ee34d4dca54786995a4ee1f..d104f407864c1fa047162fde70a5873ea59dc309 100755 (executable)
@@ -190,6 +190,15 @@ om5p)
        ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
        ;;
 
+smart-300)
+       ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
+       ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
+       ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
+       ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
+       ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
+       ;;
+
 tew-712br)
        ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
        ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
index c9ee86769a54a5a0d3c2c07bd9bfe5244ddd5edc..3b4b330be46ec2937995785368847c8d298a38bf 100755 (executable)
@@ -199,6 +199,7 @@ tl-wr941nd)
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
        ;;
 
+smart-300 | \
 tl-mr3420-v2 |\
 tl-wr841n-v8 |\
 tl-wr842n-v2 |\
index a067604df97f0e686f036fd65588a297db32aef0..80a607c2dddb551309602f79d6b308b44f8d1b41 100755 (executable)
@@ -211,6 +211,9 @@ tplink_board_detect() {
        "453000"*)
                model="MERCURY MW4530R"
                ;;
+       "934100"*)
+               model="NC-LINK SMART-300"
+               ;;
        *)
                hwver=""
                ;;
@@ -514,6 +517,9 @@ ar71xx_board_detect() {
        *RW2458N)
                name="rw2458n"
                ;;
+       *"SMART-300")
+               name="smart-300"
+               ;;
        *TEW-632BRP)
                name="tew-632brp"
                ;;
index 10651fccd4f6fd804b66da4c14ba342ec761d4a3..a9a8794c77ea8ae23bf6ebf11f12f9793c4e5b53 100644 (file)
@@ -27,6 +27,7 @@ set_preinit_iface() {
        rb-450g |\
        routerstation |\
        routerstation-pro |\
+       smart-300 |\
        tl-mr3420-v2 |\
        tl-wdr4900-v2 |\
        tl-wr1043nd-v2 |\
index ced42ed04412d8d06103b7a47230b30900088472..b5b28736bcd232fd37844ed57cb0b77ad329f15e 100755 (executable)
@@ -257,6 +257,7 @@ platform_check_image() {
        el-mini | \
        gl-inet | \
        oolite | \
+       smart-300 | \
        tl-mr10u | \
        tl-mr11u | \
        tl-mr13u | \
index 8e33176aad7871031c19fb9a778c54794f69b055..9a8378a0cbc97d687c2b1e8fee336f49529437ad 100644 (file)
@@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_PB92=y
 # CONFIG_ATH79_MACH_RB95X is not set
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SMART_300=y
 CONFIG_ATH79_MACH_TEW_632BRP=y
 CONFIG_ATH79_MACH_TEW_673GRU=y
 CONFIG_ATH79_MACH_TEW_712BR=y
index 82f2af74bb5da847353e5fcdd8ed46b580ffb4aa..c642913cda3e039081733eff5846efee363e5906 100644 (file)
@@ -80,6 +80,7 @@ CONFIG_ATH79_MACH_PB92=y
 # CONFIG_ATH79_MACH_RB95X is not set
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SMART_300=y
 CONFIG_ATH79_MACH_TEW_632BRP=y
 CONFIG_ATH79_MACH_TEW_673GRU=y
 CONFIG_ATH79_MACH_TEW_712BR=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
new file mode 100644 (file)
index 0000000..2520e96
--- /dev/null
@@ -0,0 +1,135 @@
+/*
+ *  NC-LINK SMART-300 board support
+ *
+ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define SMART_300_GPIO_LED_WLAN                13
+#define SMART_300_GPIO_LED_WAN         18
+#define SMART_300_GPIO_LED_LAN4                19
+#define SMART_300_GPIO_LED_LAN3                12
+#define SMART_300_GPIO_LED_LAN2                21
+#define SMART_300_GPIO_LED_LAN1                20
+#define SMART_300_GPIO_LED_SYSTEM      15
+#define SMART_300_GPIO_LED_POWER       14
+
+#define SMART_300_GPIO_BTN_RESET       17
+#define SMART_300_GPIO_SW_RFKILL       16
+
+#define SMART_300_KEYS_POLL_INTERVAL   20      /* msecs */
+#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
+
+#define SMART_300_GPIO_MASK        0x007fffff
+
+static const char *smart_300_part_probes[] = {
+       "tp-link",
+       NULL,
+};
+
+static struct flash_platform_data smart_300_flash_data = {
+       .part_probes    = smart_300_part_probes,
+};
+
+static struct gpio_led smart_300_leds_gpio[] __initdata = {
+       {
+               .name           = "nc-link:green:lan1",
+               .gpio           = SMART_300_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:lan2",
+               .gpio           = SMART_300_GPIO_LED_LAN2,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:lan3",
+               .gpio           = SMART_300_GPIO_LED_LAN3,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:lan4",
+               .gpio           = SMART_300_GPIO_LED_LAN4,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:system",
+               .gpio           = SMART_300_GPIO_LED_SYSTEM,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:wan",
+               .gpio           = SMART_300_GPIO_LED_WAN,
+               .active_low     = 1,
+       }, {
+               .name           = "nc-link:green:wlan",
+               .gpio           = SMART_300_GPIO_LED_WLAN,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = SMART_300_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+static void __init smart_300_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
+                                smart_300_leds_gpio);
+
+       ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(smart_300_gpio_keys),
+                                       smart_300_gpio_keys);
+
+       ath79_register_m25p80(&smart_300_flash_data);
+
+       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+       ath79_register_mdio(1, 0x0);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+       /* GMAC0 is connected to the PHY0 of the internal switch */
+       ath79_switch_data.phy4_mii_en = 1;
+       ath79_switch_data.phy_poll_mask = BIT(4);
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.phy_mask = BIT(4);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+       ath79_register_eth(0);
+
+       /* GMAC1 is connected to the internal switch */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_register_eth(1);
+
+       ath79_register_wmac(ee, mac);
+
+       gpio_request(SMART_300_GPIO_LED_POWER, "power");
+       gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
+}
+
+MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
+            smart_300_setup);
diff --git a/target/linux/ar71xx/generic/profiles/nclink.mk b/target/linux/ar71xx/generic/profiles/nclink.mk
new file mode 100644 (file)
index 0000000..04eb9ec
--- /dev/null
@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SMART-300
+        NAME:=NC-LINK SMART-300
+endef
+
+define Profile/SMART-300/Description
+        Package set optimized for the NC-LINK SMART-300.
+endef
+$(eval $(call Profile,SMART-300))
index 0acc73f1ac34afaed47d694d10c6460cd9aca84f..ec69b0ba18ea3fc6138005ec3a44bce680865b02 100644 (file)
@@ -1203,6 +1203,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
 
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
+
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
 
 $(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
diff --git a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch
new file mode 100644 (file)
index 0000000..a96b2a4
--- /dev/null
@@ -0,0 +1,38 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -103,6 +103,7 @@ enum ath79_mach_type {
+       ATH79_MACH_RB_SXTLITE2ND,       /* Mikrotik RouterBOARD SXT Lite 2nD */
+       ATH79_MACH_RB_SXTLITE5ND,       /* Mikrotik RouterBOARD SXT Lite 5nD */
+       ATH79_MACH_RW2458N,             /* Redwave RW2458N */
++      ATH79_MACH_SMART_300,           /* NC-LINK SMART-300 */
+       ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
+       ATH79_MACH_TEW_673GRU,          /* TRENDnet TEW-673GRU */
+       ATH79_MACH_TEW_712BR,           /* TRENDnet TEW-712BR */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
+       select ATH79_DEV_WMAC
+       select ATH79_ROUTERBOOT
++config ATH79_MACH_SMART_300
++      bool "NC-LINK SMART-300 board support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNDAP360
+       bool "NETGEAR WNDAP360 board support"
+       select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X)               += mach-
+ obj-$(CONFIG_ATH79_MACH_RB2011)               += mach-rb2011.o
+ obj-$(CONFIG_ATH79_MACH_RBSXTLITE)    += mach-rbsxtlite.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300)    += mach-smart-300.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
+ obj-$(CONFIG_ATH79_MACH_TEW_673GRU)   += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TEW_712BR)    += mach-tew-712br.o
diff --git a/target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch b/target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch
new file mode 100644 (file)
index 0000000..a96b2a4
--- /dev/null
@@ -0,0 +1,38 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -103,6 +103,7 @@ enum ath79_mach_type {
+       ATH79_MACH_RB_SXTLITE2ND,       /* Mikrotik RouterBOARD SXT Lite 2nD */
+       ATH79_MACH_RB_SXTLITE5ND,       /* Mikrotik RouterBOARD SXT Lite 5nD */
+       ATH79_MACH_RW2458N,             /* Redwave RW2458N */
++      ATH79_MACH_SMART_300,           /* NC-LINK SMART-300 */
+       ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
+       ATH79_MACH_TEW_673GRU,          /* TRENDnet TEW-673GRU */
+       ATH79_MACH_TEW_712BR,           /* TRENDnet TEW-712BR */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
+       select ATH79_DEV_WMAC
+       select ATH79_ROUTERBOOT
++config ATH79_MACH_SMART_300
++      bool "NC-LINK SMART-300 board support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNDAP360
+       bool "NETGEAR WNDAP360 board support"
+       select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X)               += mach-
+ obj-$(CONFIG_ATH79_MACH_RB2011)               += mach-rb2011.o
+ obj-$(CONFIG_ATH79_MACH_RBSXTLITE)    += mach-rbsxtlite.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300)    += mach-smart-300.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
+ obj-$(CONFIG_ATH79_MACH_TEW_673GRU)   += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TEW_712BR)    += mach-tew-712br.o