gemini: Bump to kernel v5.10
authorLinus Walleij <linus.walleij@linaro.org>
Sat, 17 Apr 2021 22:37:37 +0000 (00:37 +0200)
committerChristian Lamparter <chunkeey@gmail.com>
Sun, 18 Apr 2021 14:14:52 +0000 (16:14 +0200)
Only two patches against mainline remains. Switch to v5.10
which works very nicely with all Gemini devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[backported don't disable option CONFIG_BPF_SYSCAL]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
target/linux/gemini/Makefile
target/linux/gemini/config-5.10 [new file with mode: 0644]
target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch [new file with mode: 0644]
target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch [new file with mode: 0644]

index d2acb52facf7b5f63b9c12761e819c61ea96304f..95a5a87eaa4d23d8baa2be155ca84138fb1543a1 100644 (file)
@@ -10,7 +10,7 @@ BOARDNAME:=Cortina Systems CS351x
 FEATURES:=squashfs pci rtc usb dt gpio display ext4 rootfs-part boot-part
 CPU_TYPE:=fa526
 
-KERNEL_PATCHVER:=5.4
+KERNEL_PATCHVER:=5.10
 
 define Target/Description
        Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU
diff --git a/target/linux/gemini/config-5.10 b/target/linux/gemini/config-5.10
new file mode 100644 (file)
index 0000000..7434450
--- /dev/null
@@ -0,0 +1,431 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_AMBA_PL08X=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_GEMINI=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MOXART is not set
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+# CONFIG_ARCH_MULTI_V5 is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_ATA_FORCE=y
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BOUNCE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_PERCENTAGE=10
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+# CONFIG_CMA_SIZE_SEL_MBYTES is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_GEMINI=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTIG_ALLOC=y
+CONFIG_COREDUMP=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_FA=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FA=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_FA526=y
+CONFIG_CPU_NO_EFFICIENT_FFS=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_TLB_FA=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DMADEVICES=y
+CONFIG_DMATEST=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DRM=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_ILITEK_IL9322=y
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_TVE200=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_ELF_CORE=y
+# CONFIG_EMBEDDED is not set
+# CONFIG_EXPERT is not set
+CONFIG_EXT4_FS=y
+CONFIG_FARADAY_FTINTC010=y
+CONFIG_FB=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FTTMR010_TIMER=y
+CONFIG_FTWDT010_WATCHDOG=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_GEMINI_ETHERNET=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_FTGPIO010=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HDMI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HWMON=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IO_URING=y
+CONFIG_IPC_NS=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KCMP=y
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEYBOARD_DLINK_DIR685=y
+# CONFIG_LDM_DEBUG is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MQ_IOSCHED_DEADLINE=y
+CONFIG_MQ_IOSCHED_KYBER=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_GEMINI=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_NAMESPACES=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_REALTEK_SMI=y
+CONFIG_NET_DSA_TAG_RTL4_A=y
+CONFIG_NET_NS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_PATA_FTIDE010=y
+CONFIG_PCI=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_FTPCI100=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PID_NS=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_GEMINI=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GEMINI_POWEROFF=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_PREEMPT=y
+CONFIG_PREEMPTION=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RATIONAL=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_EXPERT is not set
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_GZIP=y
+CONFIG_RD_LZ4=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_RD_XZ=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RELAY=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RSEQ=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_FTRTC010=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RTC_NVMEM=y
+CONFIG_SATA_GEMINI=y
+CONFIG_SATA_HOST=y
+CONFIG_SATA_PMP=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SENSORS_DRIVETEMP=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SG_POOL=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRCU=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SWPHY=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSFS_SYSCALL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USER_NS=y
+CONFIG_USE_OF=y
+CONFIG_UTS_NS=y
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VITESSE_PHY=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
new file mode 100644 (file)
index 0000000..657956a
--- /dev/null
@@ -0,0 +1,131 @@
+From ff887de2f7af17d6264eb946f6b336e6e1521222 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 21 Apr 2017 22:19:00 +0200
+Subject: [PATCH 1/2] usb: host: fotg2: add Gemini-specific handling
+
+The Cortina Systems Gemini has bolted on a PHY inside the
+silicon that can be handled by six bits in a MISC register in
+the system controller.
+
+If we are running on Gemini, look up a syscon regmap through
+a phandle and enable VBUS and optionally the Mini-B connector.
+
+If the device is flagged as "wakeup-source" using the standard
+DT bindings, we also enable this in the global controller for
+respective port.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/usb/host/Kconfig       |  1 +
+ drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 77 insertions(+)
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -392,6 +392,7 @@ config USB_ISP1362_HCD
+ config USB_FOTG210_HCD
+       tristate "FOTG210 HCD support"
+       depends on USB && HAS_DMA && HAS_IOMEM
++      select MFD_SYSCON
+       help
+         Faraday FOTG210 is an OTG controller which can be configured as
+         an USB2.0 host. It is designed to meet USB2.0 EHCI specification
+--- a/drivers/usb/host/fotg210-hcd.c
++++ b/drivers/usb/host/fotg210-hcd.c
+@@ -34,6 +34,10 @@
+ #include <linux/io.h>
+ #include <linux/iopoll.h>
+ #include <linux/clk.h>
++#include <linux/bitops.h>
++/* For Cortina Gemini */
++#include <linux/mfd/syscon.h>
++#include <linux/regmap.h>
+ #include <asm/byteorder.h>
+ #include <asm/irq.h>
+@@ -5556,6 +5560,72 @@ static void fotg210_init(struct fotg210_
+ }
+ /*
++ * Gemini-specific initialization function, only executed on the
++ * Gemini SoC using the global misc control register.
++ */
++#define GEMINI_GLOBAL_MISC_CTRL               0x30
++#define GEMINI_MISC_USB0_WAKEUP               BIT(14)
++#define GEMINI_MISC_USB1_WAKEUP               BIT(15)
++#define GEMINI_MISC_USB0_VBUS_ON      BIT(22)
++#define GEMINI_MISC_USB1_VBUS_ON      BIT(23)
++#define GEMINI_MISC_USB0_MINI_B               BIT(29)
++#define GEMINI_MISC_USB1_MINI_B               BIT(30)
++
++static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
++{
++      struct device_node *np = dev->of_node;
++      struct regmap *map;
++      bool mini_b;
++      bool wakeup;
++      u32 mask, val;
++      int ret;
++
++      map = syscon_regmap_lookup_by_phandle(np, "syscon");
++      if (IS_ERR(map)) {
++              dev_err(dev, "no syscon\n");
++              return PTR_ERR(map);
++      }
++      mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
++      wakeup = of_property_read_bool(np, "wakeup-source");
++
++      /*
++       * Figure out if this is USB0 or USB1 by simply checking the
++       * physical base address.
++       */
++      mask = 0;
++      if (hcd->rsrc_start == 0x69000000) {
++              val = GEMINI_MISC_USB1_VBUS_ON;
++              if (mini_b)
++                      val |= GEMINI_MISC_USB1_MINI_B;
++              else
++                      mask |= GEMINI_MISC_USB1_MINI_B;
++              if (wakeup)
++                      val |= GEMINI_MISC_USB1_WAKEUP;
++              else
++                      mask |= GEMINI_MISC_USB1_WAKEUP;
++      } else {
++              val = GEMINI_MISC_USB0_VBUS_ON;
++              if (mini_b)
++                      val |= GEMINI_MISC_USB0_MINI_B;
++              else
++                      mask |= GEMINI_MISC_USB0_MINI_B;
++              if (wakeup)
++                      val |= GEMINI_MISC_USB0_WAKEUP;
++              else
++                      mask |= GEMINI_MISC_USB0_WAKEUP;
++      }
++
++      ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
++      if (ret) {
++              dev_err(dev, "failed to initialize Gemini PHY\n");
++              return ret;
++      }
++
++      dev_info(dev, "initialized Gemini PHY\n");
++      return 0;
++}
++
++/**
+  * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
+  *
+  * Allocates basic resources for this USB host controller, and
+@@ -5632,6 +5702,12 @@ static int fotg210_hcd_probe(struct plat
+       fotg210_init(fotg210);
++      if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
++              retval = fotg210_gemini_init(dev, hcd);
++              if (retval)
++                      goto failed_dis_clk;
++      }
++
+       retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       if (retval) {
+               dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
new file mode 100644 (file)
index 0000000..78a163a
--- /dev/null
@@ -0,0 +1,37 @@
+From 36ee838bf83c01cff7cb47c7b07be278d2950ac0 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Mon, 11 Mar 2019 15:44:29 +0100
+Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
+
+Rename the firmware partition so that the firmware MTD
+splitter will do its job, drop the rootfs arguments as
+the MTD splitter will set this up automatically.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+@@ -20,7 +20,7 @@
+       };
+       chosen {
+-              bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
++              bootargs = "console=ttyS0,19200n8 consoleblank=300";
+               stdout-path = "uart0:19200n8";
+       };
+@@ -317,9 +317,9 @@
+                                * this is called "upgrade" on the vendor system.
+                                */
+                               partition@40000 {
+-                                      label = "upgrade";
++                                      compatible = "wrg";
++                                      label = "firmware";
+                                       reg = <0x00040000 0x01f40000>;
+-                                      read-only;
+                               };
+                               /* RGDB, Residental Gateway Database? */
+                               partition@1f80000 {