target/linux/ath79/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2
   3 . /lib/functions/system.sh
   4 . /lib/functions/uci-defaults.sh
   5 . /lib/functions/k2t.sh
   6
   7 ath79_setup_interfaces()
   8 {
   9         local board="$1"
  10
  11         case "$board" in
  12         avm,fritz300e|\
  13         devolo,dvl1750c|\
  14         ocedo,koala|\
  15         ocedo,raccoon|\
  16         pcs,cap324|\
  17         pisen,wmm003n|\
  18         pqi,air-pen|\
  19         tplink,re450-v2|\
  20         tplink,tl-mr10u|\
  21         tplink,tl-mr3020-v1|\
  22         tplink,tl-mr3040-v2|\
  23         tplink,tl-wa901nd-v2|\
  24         tplink,tl-wr703n|\
  25         ubnt,bullet-m|\
  26         ubnt,bullet-m-xw|\
  27         ubnt,lap-120|\
  28         ubnt,nanostation-ac-loco|\
  29         ubnt,rocket-m|\
  30         ubnt,unifiac-lite|\
  31         ubnt,unifiac-mesh|\
  32         ubnt,unifi|\
  33         wd,mynet-wifi-rangeextender|\
  34         winchannel,wb2000)
  35                 ucidef_set_interface_lan "eth0"
  36                 ;;
  37         avm,fritz4020|\
  38         tplink,archer-c58-v1|\
  39         tplink,archer-c59-v1)
  40                 ucidef_set_interface_wan "eth0"
  41                 ucidef_add_switch "switch0" \
  42                         "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
  43                 ;;
  44         buffalo,bhr-4grv|\
  45         buffalo,wzr-hp-g450h)
  46                 ucidef_add_switch "switch0" \
  47                         "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
  48                 ;;
  49         buffalo,bhr-4grv2)
  50                 ucidef_add_switch "switch0" \
  51                         "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
  52                 ;;
  53         buffalo,wzr-hp-ag300h)
  54                 ucidef_set_interface_wan "eth1"
  55                 ucidef_add_switch "switch0" \
  56                         "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
  57                 ;;
  58         buffalo,wzr-hp-g302h-a1a0)
  59                 ucidef_add_switch "switch0" \
  60                         "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
  61                 ;;
  62         devolo,dvl1200e)
  63                 ucidef_set_interface_lan "eth0 eth1"
  64                 ;;
  65         dlink,dir-825-b1)
  66                 ucidef_set_interface_wan "eth1"
  67                 ucidef_add_switch "switch0" \
  68                         "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
  69                 ;;
  70         dlink,dir-825-c1|\
  71         dlink,dir-835-a1|\
  72         iodata,etg3-r|\
  73         iodata,wn-ac1167dgr|\
  74         iodata,wn-ac1600dgr2|\
  75         iodata,wn-ag300dgr|\
  76         pcs,cr5000)
  77                 ucidef_add_switch "switch0" \
  78                         "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
  79                 ;;
  80         elecom,wrc-300ghbk2-i)
  81                 ucidef_add_switch "switch0" \
  82                         "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
  83                 ;;
  84         embeddedwireless,dorin)
  85                 ucidef_add_switch "switch0" \
  86                         "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
  87                 ;;
  88         etactica,eg200)
  89                 ucidef_set_interface_lan "eth0" "dhcp"
  90                 ;;
  91         glinet,ar150|\
  92         glinet,ar300m|\
  93         glinet,gl-x750)
  94                 ucidef_set_interfaces_lan_wan "eth1" "eth0"
  95                 ;;
  96         glinet,ar750s)
  97                 ucidef_add_switch "switch0" \
  98                         "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
  99                 ;;
 100         nec,wg800hp)
 101                 ucidef_add_switch "switch0" \
 102                         "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
 103                 ;;
 104         netgear,wndr3700|\
 105         netgear,wndr3700v2|\
 106         netgear,wndr3800)
 107                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 108                 ucidef_add_switch "switch0" \
 109                         "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
 110                 ucidef_add_switch_attr "switch0" "blinkrate" 2
 111                 ucidef_add_switch_port_attr "switch0" 1 led 6
 112                 ucidef_add_switch_port_attr "switch0" 2 led 9
 113                 ucidef_add_switch_port_attr "switch0" 5 led 2
 114                 ;;
 115         netgear,wnr612-v2|\
 116         on,n150r)
 117                 ucidef_set_interface_wan "eth0"
 118                 ucidef_add_switch "switch0" \
 119                 "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
 120                 ;;
 121         pcs,cr3000)
 122                 ucidef_add_switch "switch0" \
 123                         "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
 124                 ucidef_set_interface_wan "eth0"
 125                 ;;
 126         phicomm,k2t)
 127                 ucidef_add_switch "switch0" \
 128                         "0@eth0" "3:lan:1" "5:lan:2" "4:wan"
 129                 ;;
 130         rosinson,wr818)
 131                 ucidef_add_switch "switch0" \
 132                         "0@eth0" "1:lan" "2:lan" "3:wan"
 133                 ;;
 134         tplink,archer-c7-v1|\
 135         tplink,archer-c7-v2|\
 136         tplink,tl-wdr4900-v2)
 137                 ucidef_add_switch "switch0" \
 138                         "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 139                 ;;
 140         buffalo,whr-g301n|\
 141         tplink,tl-mr3220-v1|\
 142         tplink,tl-mr3420-v1|\
 143         tplink,tl-wr841-v7|\
 144         ubnt,airrouter)
 145                 ucidef_set_interface_wan "eth0"
 146                 ucidef_add_switch "switch0" \
 147                         "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 148                 ;;
 149         tplink,archer-a7-v5|\
 150         tplink,archer-c7-v5|\
 151         tplink,tl-wdr3600|\
 152         tplink,tl-wdr4300)
 153                 ucidef_add_switch "switch0" \
 154                         "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
 155                 ;;
 156         tplink,tl-wr1043nd-v1)
 157                 ucidef_add_switch "switch0" \
 158                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 159                 ;;
 160         tplink,tl-wr1043nd-v2|\
 161         tplink,tl-wr1043nd-v3)
 162                 ucidef_add_switch "switch0" \
 163                         "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
 164                 ;;
 165         dlink,dir-859-a1|\
 166         tplink,tl-wr1043nd-v4)
 167                 ucidef_add_switch "switch0" \
 168                         "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
 169                 ;;
 170         tplink,tl-wr2543-v1)
 171                 ucidef_add_switch "switch0" \
 172                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 173                 ;;
 174         tplink,tl-wr740n-v1|\
 175         tplink,tl-wr740n-v3|\
 176         tplink,tl-wr741-v1|\
 177         tplink,tl-wr743nd-v1|\
 178         tplink,tl-wr841-v5|\
 179         tplink,tl-wr941-v4)
 180                 ucidef_set_interface_wan "eth0"
 181                 ucidef_add_switch "switch0" \
 182                         "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 183                 ;;
 184         tplink,tl-wr740nd-v4|\
 185         tplink,tl-wr842n-v1|\
 186         tplink,tl-wr842n-v2)
 187                 ucidef_set_interface_wan "eth0"
 188                 ucidef_add_switch "switch0" \
 189                         "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 190                 ;;
 191         tplink,tl-wr741nd-v4|\
 192         tplink,tl-wr841-v9|\
 193         tplink,tl-wr841-v11)
 194                 ucidef_set_interface_wan "eth0"
 195                 ucidef_add_switch "switch0" \
 196                         "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 197                 ;;
 198         tplink,tl-wr941-v2)
 199                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 200                 ;;
 201         ubnt,routerstation)
 202                 ucidef_set_interfaces_lan_wan "eth1" "eth0"
 203                 ;;
 204         ubnt,routerstation-pro)
 205                 ucidef_set_interface_wan "eth0"
 206                 ucidef_add_switch "switch0" \
 207                         "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
 208                 ;;
 209         ubnt,nanostation-ac|\
 210         ubnt,unifiac-mesh-pro|\
 211         ubnt,unifiac-pro)
 212                 ucidef_add_switch "switch0" \
 213                         "0@eth0" "2:lan" "3:wan"
 214                 ;;
 215         *)
 216                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 217                 ;;
 218         esac
 219 }
 220
 221 ath79_setup_macs()
 222 {
 223         local board="$1"
 224
 225         case "$board" in
 226         avm,fritz300e)
 227                 lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 228                 ;;
 229         avm,fritz4020)
 230                 lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 231                 wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
 232                 ;;
 233         dlink,dir-825-b1)
 234                 lan_mac=$(mtd_get_mac_text "caldata" 65440)
 235                 wan_mac=$(mtd_get_mac_text "caldata" 65460)
 236                 ;;
 237         dlink,dir-825-c1|\
 238         dlink,dir-835-a1)
 239                 lan_mac=$(mtd_get_mac_text "mac" 4)
 240                 wan_mac=$(mtd_get_mac_text "mac" 24)
 241                 ;;
 242         dlink,dir-859-a1)
 243                 lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
 244                 wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
 245                 ;;
 246         elecom,wrc-300ghbk2-i)
 247                 wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
 248                 ;;
 249         iodata,etg3-r)
 250                 lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 251                 wan_mac=$(macaddr_add "$lan_mac" -1)
 252                 ;;
 253         iodata,wn-ac1167dgr|\
 254         iodata,wn-ac1600dgr2|\
 255         iodata,wn-ag300dgr)
 256                 lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 257                 wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
 258                 ;;
 259         nec,wg800hp)
 260                 lan_mac=$(mtd_get_mac_text board_data 640)
 261                 wan_mac=$(mtd_get_mac_text board_data 1152)
 262                 ;;
 263         netgear,wndr3700|\
 264         netgear,wndr3700v2|\
 265         netgear,wndr3800)
 266                 lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
 267                 ;;
 268         phicomm,k2t)
 269                 lan_mac=$(k2t_get_mac "lan_mac")
 270                 wan_mac=$(k2t_get_mac "wan_mac")
 271                 ;;
 272         rosinson,wr818)
 273                 wan_mac=$(mtd_get_mac_binary factory 0)
 274                 lan_mac=$(macaddr_setbit_la "$wan_mac")
 275                 ;;
 276         tplink,tl-wr1043nd-v4)
 277                 base_mac=$(mtd_get_mac_binary product-info 8)
 278                 wan_mac=$(macaddr_add "$base_mac" 1)
 279                 ;;
 280         tplink,tl-wr941-v2)
 281                 base_mac=$(mtd_get_mac_binary u-boot 130048)
 282                 wan_mac=$(macaddr_add "$base_mac" 1)
 283                 ;;
 284         ubnt,routerstation|\
 285         ubnt,routerstation-pro)
 286                 wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
 287                 lan_mac=$(macaddr_add "$wan_mac" 1)
 288                 ;;
 289         wd,mynet-wifi-rangeextender)
 290                 lan_mac=$(nvram get et0macaddr)
 291                 ;;
 292         esac
 293
 294         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 295         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
 296 }
 297
 298 board_config_update
 299 board=$(board_name)
 300 ath79_setup_interfaces $board
 301 ath79_setup_macs $board
 302 board_config_flush
 303
 304 exit 0