target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power;
  13                 led-running = &power;
  14                 led-upgrade = &power;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200n8";
  19         };
  20
  21         leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 power: power {
  25                         label = "iodata:green:power";
  26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 eco {
  31                         label = "iodata:green:eco";
  32                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wlan5g {
  36                         label = "iodata:green:wlan5g";
  37                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wlan2g {
  42                         label = "iodata:green:wlan2g";
  43                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy1tpt";
  45                 };
  46
  47                 notification {
  48                         label = "iodata:amber:notification";
  49                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  50                 };
  51         };
  52
  53         keys: keys {
  54                 compatible = "gpio-keys-polled";
  55                 poll-interval = <20>;
  56
  57                 eco {
  58                         label = "eco";
  59                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  60                         linux,code = <BTN_1>;
  61                         debounce-interval = <60>;
  62                 };
  63
  64                 auto {
  65                         label = "auto";
  66                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  67                         linux,code = <BTN_0>;
  68                         linux,input-type = <EV_SW>;
  69                         debounce-interval = <60>;
  70                 };
  71
  72                 wps {
  73                         label = "wps";
  74                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_WPS_BUTTON>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 reset {
  80                         label = "reset";
  81                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_RESTART>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 router {
  87                         label = "router";
  88                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  89                         linux,code = <BTN_0>;
  90                         linux,input-type = <EV_SW>;
  91                         debounce-interval = <60>;
  92                 };
  93         };
  94 };
  95
  96 &spi {
  97         status = "okay";
  98         num-cs = <1>;
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x000000 0x030000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@30000 {
 117                                 label = "u-boot-env";
 118                                 reg = <0x030000 0x010000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@40000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x040000 0xe50000>;
 126                         };
 127
 128                         partition@e90000 {
 129                                 label = "manufacture";
 130                                 reg = <0xe90000 0x100000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@f90000 {
 135                                 label = "backup";
 136                                 reg = <0xf90000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@fa0000 {
 141                                 label = "storage";
 142                                 reg = <0xfa0000 0x050000>;
 143                                 read-only;
 144                         };
 145
 146                         art: partition@ff0000 {
 147                                 label = "art";
 148                                 reg = <0xff0000 0x010000>;
 149                                 read-only;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &mdio0 {
 156         status = "okay";
 157
 158         phy0: ethernet-phy@0 {
 159                 reg = <0>;
 160
 161                 qca,ar8327-initvals = <
 162                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 163                         0x7c 0x0000007e /* PORT0_STATUS */
 164                 >;
 165         };
 166 };
 167
 168 &eth0 {
 169         status = "okay";
 170
 171         pll-data = <0xa6000000 0x00000101 0x00001616>;
 172         phy-handle = <&phy0>;
 173 };
 174
 175 &pcie1 {
 176         status = "okay";
 177
 178         wifi@0,0 {
 179                 compatible = "pci168c,003c";
 180                 reg = <0x0000 0 0 0 0>;
 181         };
 182 };
 183
 184 &uart {
 185         status = "okay";
 186 };
 187
 188 &usb_phy0 {
 189         status = "okay";
 190 };
 191
 192 &usb0 {
 193         status = "okay";
 194 };
 195
 196 &wmac {
 197         status = "okay";
 198         qca,no-eeprom;
 199 };