target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "ASUS Lyra MAP-AC2200";
  10         compatible = "asus,map-ac2200";
  11
  12         aliases {
  13                 led-boot = &led_blue0;
  14                 led-failsafe = &led_red0;
  15                 led-running = &led_blue0;
  16                 led-upgrade = &led_red0;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                 };
  27
  28                 ess-psgmii@98000 {
  29                         status = "okay";
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 ess_tcsr@1953000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x1953000 0x1000>;
  41                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  42                 };
  43
  44                 tcsr@1957000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1957000 0x100>;
  47                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  48                 };
  49
  50                 usb2@60f8800 {
  51                         status = "okay";
  52                 };
  53
  54                 crypto@8e3a000 {
  55                         status = "okay";
  56                 };
  57
  58                 watchdog@b017000 {
  59                         status = "okay";
  60                 };
  61
  62                 ess-switch@c000000 {
  63                         status = "okay";
  64                 };
  65
  66                 edma@c080000 {
  67                         status = "okay";
  68                 };
  69         };
  70
  71         keys {
  72                 compatible = "gpio-keys";
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_RESTART>;
  78                 };
  79
  80                 wps {
  81                         label = "wps";
  82                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_WPS_BUTTON>;
  84                 };
  85         };
  86 };
  87
  88 &nand {
  89         pinctrl-0 = <&nand_pins>;
  90         pinctrl-names = "default";
  91         status = "okay";
  92
  93         nand@0 {
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "SBL1";
 101                                 reg = <0x0 0x80000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@80000 {
 106                                 label = "MIBIB";
 107                                 reg = <0x80000 0x80000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@100000 {
 112                                 label = "QSEE";
 113                                 reg = <0x100000 0x100000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@200000 {
 118                                 label = "CDT";
 119                                 reg = <0x200000 0x80000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@280000 {
 124                                 label = "APPSBL";
 125                                 reg = <0x280000 0x140000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@3c0000 {
 130                                 label = "APPSBLENV";
 131                                 reg = <0x3c0000 0x40000>;
 132                                 read-only;
 133                         };
 134
 135                         partition@400000 {
 136                                 label = "ubi";
 137                                 reg = <0x400000 0x7c00000>;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &tlmm {
 144         i2c_0_pins: i2c_0_pinmux {
 145                 pinmux {
 146                         function = "blsp_i2c0";
 147                         pins = "gpio20", "gpio21";
 148                         drive-strength = <16>;
 149                         bias-disable;
 150                 };
 151         };
 152
 153         serial_pins: serial_pinmux {
 154                 mux {
 155                         pins = "gpio16", "gpio17";
 156                         function = "blsp_uart0";
 157                         bias-disable;
 158                 };
 159         };
 160
 161         nand_pins: nand_pins {
 162                 pullups {
 163                         pins =  "gpio52", "gpio53", "gpio58",
 164                                 "gpio59";
 165                         function = "qpic";
 166                         bias-pull-up;
 167                 };
 168
 169                 pulldowns {
 170                         pins =  "gpio54", "gpio55", "gpio56",
 171                                 "gpio57", "gpio60", "gpio61",
 172                                 "gpio62", "gpio63", "gpio64",
 173                                 "gpio65", "gpio66", "gpio67",
 174                                 "gpio68", "gpio69";
 175                         function = "qpic";
 176                         bias-pull-down;
 177                 };
 178         };
 179 };
 180
 181 &cryptobam {
 182         status = "okay";
 183 };
 184
 185 &blsp_dma {
 186         status = "okay";
 187 };
 188
 189 &qpic_bam {
 190         status = "okay";
 191 };
 192
 193 &wifi0 {
 194         status = "okay";
 195         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 196 };
 197
 198 &wifi1 {
 199         status = "okay";
 200         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 201         ieee80211-freq-limit = <5470000 5875000>;
 202 };
 203
 204 &pcie0 {
 205         status = "okay";
 206         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 207         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 208
 209         bridge@0,0 {
 210                 reg = <0x00000000 0 0 0 0>;
 211                 #address-cells = <3>;
 212                 #size-cells = <2>;
 213                 ranges;
 214
 215                 wifi2: wifi@1,0 {
 216                         compatible = "qcom,ath10k";
 217                         status = "okay";
 218                         reg = <0x00010000 0 0 0 0>;
 219                         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 220                         ieee80211-freq-limit = <5170000 5350000>;
 221                 };
 222         };
 223 };
 224
 225 &usb2_hs_phy {
 226         /* Bluetooth module attached via USB */
 227         status = "okay";
 228 };
 229
 230 &blsp1_i2c3 {
 231         pinctrl-0 = <&i2c_0_pins>;
 232         pinctrl-names = "default";
 233         status = "okay";
 234
 235         led-controller@32 {
 236                 /* 9-channel RGB LED controller */
 237                 compatible = "national,lp5523";
 238                 reg = <0x32>;
 239                 clock-mode = [01];
 240
 241                 led_blue0: blue0 {
 242                         chan-name = "blue0";
 243                         label = "map-ac2200:blue:chan0";
 244                         led-cur = [fa];
 245                         max-cur = [ff];
 246                 };
 247
 248                 blue1 {
 249                         chan-name = "blue1";
 250                         label = "map-ac2200:blue:chan1";
 251                         led-cur = [fa];
 252                         max-cur = [ff];
 253                 };
 254
 255                 blue2 {
 256                         chan-name = "blue2";
 257                         label = "map-ac2200:blue:chan2";
 258                         led-cur = [fa];
 259                         max-cur = [ff];
 260                 };
 261
 262                 led_green0: green0 {
 263                         chan-name = "green0";
 264                         label = "map-ac2200:green:chan0";
 265                         led-cur = [fa];
 266                         max-cur = [ff];
 267                 };
 268
 269                 green1 {
 270                         chan-name = "green1";
 271                         label = "map-ac2200:green:chan1";
 272                         led-cur = [fa];
 273                         max-cur = [ff];
 274                 };
 275
 276                 green2 {
 277                         chan-name = "green2";
 278                         label = "map-ac2200:green:chan2";
 279                         led-cur = [fa];
 280                         max-cur = [ff];
 281                 };
 282
 283                 led_red0: red0 {
 284                         chan-name = "red0";
 285                         label = "map-ac2200:red:chan0";
 286                         led-cur = [fa];
 287                         max-cur = [ff];
 288                 };
 289
 290                 red1 {
 291                         chan-name = "red1";
 292                         label = "map-ac2200:red:chan1";
 293                         led-cur = [fa];
 294                         max-cur = [ff];
 295                 };
 296
 297                 red2 {
 298                         chan-name = "red2";
 299                         label = "map-ac2200:red:chan2";
 300                         led-cur = [fa];
 301                         max-cur = [ff];
 302                 };
 303         };
 304 };
 305
 306 &blsp1_uart1 {
 307         pinctrl-0 = <&serial_pins>;
 308         pinctrl-names = "default";
 309         status = "okay";
 310 };