target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch

   1 From: Landen Chao <landen.chao@mediatek.com>
   2 Subject: [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to
   3  bananapi-bpi-r64 board
   4 Date: Tue, 10 Dec 2019 16:14:42 +0800
   5
   6 Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
   7
   8 Signed-off-by: Landen Chao <landen.chao@mediatek.com>
   9 ---
  10  .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 50 +++++++++++++++++++
  11  1 file changed, 50 insertions(+)
  12
  13 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
  14 +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
  15 @@ -150,6 +150,56 @@
  16         mdio: mdio-bus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19 +
  20 +               switch@0 {
  21 +                       compatible = "mediatek,mt7531";
  22 +                       reg = <0>;
  23 +                       reset-gpios = <&pio 54 0>;
  24 +
  25 +                       ports {
  26 +                               #address-cells = <1>;
  27 +                               #size-cells = <0>;
  28 +
  29 +                               port@0 {
  30 +                                       reg = <0>;
  31 +                                       label = "wan";
  32 +                               };
  33 +
  34 +                               port@1 {
  35 +                                       reg = <1>;
  36 +                                       label = "lan0";
  37 +                               };
  38 +
  39 +                               port@2 {
  40 +                                       reg = <2>;
  41 +                                       label = "lan1";
  42 +                               };
  43 +
  44 +                               port@3 {
  45 +                                       reg = <3>;
  46 +                                       label = "lan2";
  47 +                               };
  48 +
  49 +                               port@4 {
  50 +                                       reg = <4>;
  51 +                                       label = "lan3";
  52 +                               };
  53 +
  54 +                               port@6 {
  55 +                                       reg = <6>;
  56 +                                       label = "cpu";
  57 +                                       ethernet = <&gmac0>;
  58 +                                       phy-mode = "2500base-x";
  59 +
  60 +                                       fixed-link {
  61 +                                               speed = <2500>;
  62 +                                               full-duplex;
  63 +                                               pause;
  64 +                                       };
  65 +                               };
  66 +                       };
  67 +               };
  68 +
  69         };
  70  };
  71