Remove the LED code from the network driver
authorFlorian Fainelli <florian@openwrt.org>
Mon, 6 Aug 2007 18:56:40 +0000 (18:56 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Mon, 6 Aug 2007 18:56:40 +0000 (18:56 +0000)
SVN-Revision: 8357

target/linux/rdc-2.6/files/drivers/net/r6040.c

index 135ea13fde322beb0ab45cc5750e74fd789cf225..350145e94e394f00801e72a7b0fb8a2259f9fee9 100644 (file)
@@ -617,9 +617,6 @@ r6040_close(struct net_device *dev)
        return 0;
 }
 
-#define DMZ_GPIO       1
-#define RDC3210_CFGREG_ADDR    0x0CF8
-#define RDC3210_CFGREG_DATA    0x0CFC
 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 {
        struct r6040_private *lp = dev->priv;
@@ -641,25 +638,6 @@ static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
                if(args[0]&(1<<27))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x2000));     /* port 2 */
                if(args[0]&(1<<25))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x0020));     /* port 3 */
 
-               /* DMZ LED */
-               val = 0x80000000 | (7 << 11) | ((0x48));
-               outl(val, RDC3210_CFGREG_ADDR);
-               udelay(10);
-               val = inl(RDC3210_CFGREG_DATA);
-
-               val |= (0x1 << DMZ_GPIO);
-               outl(val, RDC3210_CFGREG_DATA);
-               udelay(10);
-
-               val = 0x80000000 | (7 << 11) | ((0x4C));
-               outl(val, RDC3210_CFGREG_ADDR);
-               udelay(10);
-               val = inl(RDC3210_CFGREG_DATA);
-               if(args[0]&(1<<23))     /* DMZ enabled */
-                       val &= ~(0x1 << DMZ_GPIO);      /* low activated */
-               else val |= (0x1 << DMZ_GPIO);
-               outl(val, RDC3210_CFGREG_DATA);
-               udelay(10);
        }
        return 0;
 }