target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts

   1 #include "bcm6318.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Sagem F@st 2704N";
   7         compatible = "sagem,fast-2704n", "brcm,bcm6318";
   8
   9         aliases {
  10                 led-boot = &led_power_red;
  11                 led-failsafe = &led_power_red;
  12                 led-running = &led_power_red;
  13                 led-upgrade = &led_power_red;
  14         };
  15
  16         chosen {
  17                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 wlan {
  28                         label = "wlan";
  29                         gpios = <&pinctrl 1 0>;
  30                         linux,code = <KEY_WLAN>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "wps";
  36                         gpios = <&pinctrl 33 1>;
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         debounce-interval = <60>;
  39                 };
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&pinctrl 34 1>;
  44                         linux,code = <KEY_RESTART>;
  45                         debounce-interval = <60>;
  46                 };
  47         };
  48
  49         leds {
  50                 compatible = "gpio-leds";
  51
  52                 wps_green {
  53                         label = "green:wps";
  54                         gpios = <&pinctrl 2 1>;
  55                 };
  56                 lan1_green {
  57                         label = "green:lan1";
  58                         gpios = <&pinctrl 4 1>;
  59                 };
  60                 lan2_green {
  61                         label = "green:lan2";
  62                         gpios = <&pinctrl 5 1>;
  63                 };
  64                 lan3_green {
  65                         label = "green:lan3";
  66                         gpios = <&pinctrl 6 1>;
  67                 };
  68                 lan4_green {
  69                         label = "green:lan4";
  70                         gpios = <&pinctrl 7 1>;
  71                 };
  72                 inet_green {
  73                         label = "green:inet";
  74                         gpios = <&pinctrl 8 1>;
  75                 };
  76                 inet_red {
  77                         label = "red:inet";
  78                         gpios = <&pinctrl 9 1>;
  79                 };
  80                 dsl_green {
  81                         label = "green:dsl";
  82                         gpios = <&pinctrl 10 1>;
  83                 };
  84                 led_power_red: power_red {
  85                         label = "red:power";
  86                         gpios = <&pinctrl 11 1>;
  87                 };
  88                 power_green {
  89                         label = "green:power";
  90                         gpios = <&pinctrl 47 1>;
  91                         default-state = "on";
  92                 };
  93                 usb_green {
  94                         label = "green:usb";
  95                         gpios = <&pinctrl 49 1>;
  96                 };
  97         };
  98 };
  99
 100 &hsspi {
 101         status = "okay";
 102
 103         flash@0 {
 104                 compatible = "jedec,spi-nor";
 105                 spi-max-frequency = <62500000>;
 106                 spi-tx-bus-width = <2>;
 107                 spi-rx-bus-width = <2>;
 108                 reg = <0>;
 109
 110                 #address-cells = <1>;
 111                 #size-cells = <1>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         cfe@0 {
 119                                 reg = <0x000000 0x010000>;
 120                                 label = "cfe";
 121                                 read-only;
 122                         };
 123
 124                         linux@10000 {
 125                                 reg = <0x010000 0x7e0000>;
 126                                 label = "linux";
 127                                 compatible = "brcm,bcm963xx-imagetag";
 128                         };
 129
 130                         nvram@7f0000 {
 131                                 reg = <0x7f0000 0x010000>;
 132                                 label = "nvram";
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &uart0 {
 139         status = "okay";
 140 };