target/linux/bcm63xx/dts/bcm6328-innacomm-w3400v6.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Innacomm W3400V6";
   9         compatible = "innacomm,w3400v6", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_red;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&pinctrl 15 1>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&pinctrl 23 1>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43 };
  44
  45 &hsspi {
  46         status = "okay";
  47
  48         flash@0 {
  49                 compatible = "jedec,spi-nor";
  50                 spi-max-frequency = <16666667>;
  51                 spi-tx-bus-width = <2>;
  52                 spi-rx-bus-width = <2>;
  53                 reg = <0>;
  54
  55                 #address-cells = <1>;
  56                 #size-cells = <1>;
  57
  58                 partitions {
  59                         compatible = "brcm,bcm963xx-cfe-nor-partitions";
  60                 };
  61         };
  62 };
  63
  64 &leds {
  65         status = "okay";
  66
  67         pinctrl-names = "default";
  68         pinctrl-0 = <&pinctrl_leds>;
  69
  70         led@1 {
  71                 reg = <1>;
  72                 active-low;
  73                 label = "green:inet";
  74         };
  75
  76         led@2 {
  77                 reg = <2>;
  78                 active-low;
  79                 label = "red:inet";
  80         };
  81
  82         led@3 {
  83                 reg = <3>;
  84                 active-low;
  85                 label = "green:dsl";
  86         };
  87
  88         led_power_green: led@4 {
  89                 reg = <4>;
  90                 active-low;
  91                 label = "green:power";
  92                 default-state = "on";
  93         };
  94
  95         led_power_red: led@5 {
  96                 reg = <5>;
  97                 active-low;
  98                 label = "red:power";
  99         };
 100
 101         led@11 {
 102                 reg = <11>;
 103                 active-low;
 104                 label = "green:wps";
 105         };
 106 };
 107
 108 &pinctrl {
 109         pinctrl_leds: leds {
 110                 function = "led";
 111                 pins = "gpio1", "gpio2", "gpio3",
 112                        "gpio4", "gpio5", "gpio11";
 113         };
 114 };
 115
 116 &uart0 {
 117         status = "okay";
 118 };