target/linux/ramips/dts/mt7621_firefly_firewrt.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "firefly,firewrt", "mediatek,mt7621-soc";
   8         model = "Firefly FireWRT";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_power: power {
  21                         label = "green:power";
  22                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34
  35                 power {
  36                         label = "power";
  37                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_POWER>;
  39                 };
  40         };
  41 };
  42
  43 &sdhci {
  44         status = "okay";
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         flash@0 {
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <10000000>;
  54
  55                 partitions {
  56                         compatible = "fixed-partitions";
  57                         #address-cells = <1>;
  58                         #size-cells = <1>;
  59
  60                         partition@0 {
  61                                 label = "u-boot";
  62                                 reg = <0x0 0x30000>;
  63                                 read-only;
  64                         };
  65
  66                         partition@30000 {
  67                                 label = "u-boot-env";
  68                                 reg = <0x30000 0x10000>;
  69                                 read-only;
  70                         };
  71
  72                         factory: partition@40000 {
  73                                 label = "factory";
  74                                 reg = <0x40000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@50000 {
  79                                 compatible = "denx,uimage";
  80                                 label = "firmware";
  81                                 reg = <0x50000 0xfb0000>;
  82                         };
  83                 };
  84         };
  85 };
  86
  87 &pcie {
  88         status = "okay";
  89 };
  90
  91 &pcie0 {
  92         mt76@0,0 {
  93                 reg = <0x0000 0 0 0 0>;
  94                 mediatek,mtd-eeprom = <&factory 0x8000>;
  95                 ieee80211-freq-limit = <5000000 6000000>;
  96         };
  97 };
  98
  99 &pcie1 {
 100         mt76@0,0 {
 101                 reg = <0x0000 0 0 0 0>;
 102                 mediatek,mtd-eeprom = <&factory 0x0000>;
 103                 ieee80211-freq-limit = <2400000 2500000>;
 104         };
 105 };
 106
 107 &gmac0 {
 108         mtd-mac-address = <&factory 0xe000>;
 109 };
 110
 111 &switch0 {
 112         ports {
 113                 port@0 {
 114                         status = "okay";
 115                         label = "lan1";
 116                 };
 117
 118                 port@1 {
 119                         status = "okay";
 120                         label = "lan2";
 121                 };
 122
 123                 port@2 {
 124                         status = "okay";
 125                         label = "lan3";
 126                 };
 127
 128                 port@3 {
 129                         status = "okay";
 130                         label = "lan4";
 131                 };
 132
 133                 port@4 {
 134                         status = "okay";
 135                         label = "wan";
 136                         mtd-mac-address = <&factory 0xe000>;
 137                         mac-address-increment = <1>;
 138                 };
 139         };
 140 };
 141
 142 &state_default {
 143         gpio {
 144                 groups = "wdt", "rgmii2";
 145                 function = "gpio";
 146         };
 147 };