target/linux/ramips/dts/mt7621_netgear_ex6150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,ex6150", "mediatek,mt7621-soc";
  10         model = "Netgear EX6150";
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_amber;
  15                 led-running = &power_green;
  16                 led-upgrade = &power_amber;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 power_amber: power_amber {
  23                         label = "amber:power";
  24                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 power_green: power_green {
  28                         label = "green:power";
  29                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 wps {
  33                         label = "green:wps";
  34                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 rightarrow {
  38                         label = "blue:rightarrow";
  39                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 leftarrow {
  43                         label = "blue:leftarrow";
  44                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 router_green {
  48                         label = "green:router";
  49                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy1tpt";
  51                 };
  52
  53                 router_red {
  54                         label = "red:router";
  55                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 client_green {
  59                         label = "green:client";
  60                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy0tpt";
  62                 };
  63
  64                 client_red {
  65                         label = "red:client";
  66                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         keys {
  71                 compatible = "gpio-keys";
  72
  73                 wps {
  74                         label = "wps";
  75                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                 };
  78
  79                 reset {
  80                         label = "reset";
  81                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_RESTART>;
  83                 };
  84
  85                 toggle {
  86                         label = "AP/Extender toggle";
  87                         gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
  88                         linux,code = <BTN_0>;
  89                         linux,input-type = <EV_SW>;
  90                         /* Active when switch is set to "Access Point" */
  91                 };
  92         };
  93 };
  94
  95 &spi0 {
  96         status = "okay";
  97
  98         flash@0 {
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <10000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         partition@0 {
 109                                 label = "u-boot";
 110                                 reg = <0x0 0x30000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@30000 {
 115                                 label = "config";
 116                                 reg = <0x30000 0x10000>;
 117                                 read-only;
 118                         };
 119
 120                         factory: partition@40000 {
 121                                 label = "factory";
 122                                 reg = <0x40000 0x10000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@50000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x50000 0xe80000>;
 130                         };
 131
 132                         partition@ed0000 {
 133                                 label = "ML1";
 134                                 reg = <0xed0000 0x10000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@ef0000 {
 139                                 label = "ML2";
 140                                 reg = <0xef0000 0x20000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@f10000 {
 145                                 label = "ML3";
 146                                 reg = <0xf10000 0x20000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@f30000 {
 151                                 label = "ML4";
 152                                 reg = <0xf30000 0x20000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@f50000 {
 157                                 label = "ML5";
 158                                 reg = <0xf50000 0x20000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@f70000 {
 163                                 label = "ML6";
 164                                 reg = <0xf70000 0x20000>;
 165                                 read-only;
 166                         };
 167
 168                         partition@f90000 {
 169                                 label = "ML7";
 170                                 reg = <0xf90000 0x20000>;
 171                                 read-only;
 172                         };
 173
 174                         partition@fb0000 {
 175                                 label = "T_Meter1";
 176                                 reg = <0xfb0000 0x10000>;
 177                                 read-only;
 178                         };
 179
 180                         partition@fc0000 {
 181                                 label = "T_Meter2";
 182                                 reg = <0xfc0000 0x10000>;
 183                                 read-only;
 184                         };
 185
 186                         partition@fd0000 {
 187                                 label = "POT";
 188                                 reg = <0xfd0000 0x10000>;
 189                                 read-only;
 190                         };
 191
 192                         partition@fe0000 {
 193                                 label = "board_data";
 194                                 reg = <0xfe0000 0x10000>;
 195                                 read-only;
 196                         };
 197
 198                         partition@ff0000 {
 199                                 label = "nvram";
 200                                 reg = <0xff0000 0x10000>;
 201                                 read-only;
 202                         };
 203                 };
 204         };
 205 };
 206
 207 &pcie {
 208         status = "okay";
 209
 210         reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
 211                       <&gpio 8 GPIO_ACTIVE_LOW>;
 212 };
 213
 214 &pcie0 {
 215         wifi@0,0 {
 216                 reg = <0x0000 0 0 0 0>;
 217                 mediatek,mtd-eeprom = <&factory 0x8000>;
 218                 ieee80211-freq-limit = <5000000 6000000>;
 219         };
 220 };
 221
 222 &pcie1 {
 223         wifi@0,0 {
 224                 reg = <0x0000 0 0 0 0>;
 225                 mediatek,mtd-eeprom = <&factory 0x0000>;
 226                 ieee80211-freq-limit = <2400000 2500000>;
 227         };
 228 };
 229
 230 &ethernet {
 231         pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
 232 };
 233
 234 &gmac0 {
 235         nvmem-cells = <&macaddr_factory_4>;
 236         nvmem-cell-names = "mac-address";
 237 };
 238
 239 &switch0 {
 240         ports {
 241                 port@0 {
 242                         status = "okay";
 243                         label = "lan";
 244                 };
 245         };
 246 };
 247
 248 &state_default {
 249         gpio {
 250                 groups = "sdhci", "rgmii2", "jtag";
 251                 function = "gpio";
 252         };
 253 };
 254
 255 &factory {
 256         compatible = "nvmem-cells";
 257         #address-cells = <1>;
 258         #size-cells = <1>;
 259
 260         macaddr_factory_4: macaddr@4 {
 261                 reg = <0x4 0x6>;
 262         };
 263 };