target/linux/ramips/dts/mt7621_renkforce_ws-wn530hp3-a.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "renkforce,ws-wn530hp3-a", "mediatek,mt7621-soc";
  10         model = "Renkforce WS-WN530HP3-A";
  11
  12         aliases {
  13                 label-mac-device = &gmac0;
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power: led_1 {
  34                         label = "red:led1";
  35                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 led_2 {
  39                         label = "blue:led2";
  40                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         flash@0 {
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 spi-max-frequency = <40000000>;
  52
  53                 partitions {
  54                         compatible = "fixed-partitions";
  55                         #address-cells = <1>;
  56                         #size-cells = <1>;
  57
  58                         partition@0 {
  59                                 label = "u-boot";
  60                                 reg = <0x0 0x30000>;
  61                                 read-only;
  62                         };
  63
  64                         partition@30000 {
  65                                 label = "u-boot-env";
  66                                 reg = <0x30000 0x10000>;
  67                                 read-only;
  68                         };
  69
  70                         factory: partition@40000 {
  71                                 label = "factory";
  72                                 reg = <0x40000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         partition@50000 {
  77                                 compatible = "denx,uimage";
  78                                 label = "firmware";
  79                                 reg = <0x50000 0xf30000>;
  80                         };
  81                 };
  82         };
  83 };
  84
  85 &pcie {
  86         status = "okay";
  87 };
  88
  89 &pcie0 {
  90         wifi0: wifi@0,0 {
  91                 compatible = "mediatek,mt76";
  92                 reg = <0x0000 0 0 0 0>;
  93                 mediatek,mtd-eeprom = <&factory 0x0000>;
  94                 ieee80211-freq-limit = <2400000 2500000>;
  95                 nvmem-cells = <&macaddr_factory_4>;
  96                 nvmem-cell-names = "mac-address";
  97         };
  98 };
  99
 100 &pcie1 {
 101         wifi1: wifi@0,0 {
 102                 compatible = "mediatek,mt76";
 103                 reg = <0x0000 0 0 0 0>;
 104                 mediatek,mtd-eeprom = <&factory 0x8000>;
 105                 ieee80211-freq-limit = <5000000 6000000>;
 106                 nvmem-cells = <&macaddr_factory_4>;
 107                 nvmem-cell-names = "mac-address";
 108                 mac-address-increment = <1>;
 109         };
 110 };
 111
 112 &gmac0 {
 113         nvmem-cells = <&macaddr_factory_4>;
 114         nvmem-cell-names = "mac-address";
 115         mac-address-increment = <(-2)>;
 116 };
 117
 118 &switch0 {
 119         ports {
 120                 port@0 {
 121                         status = "okay";
 122                         label = "lan2";
 123                 };
 124
 125                 port@1 {
 126                         status = "okay";
 127                         label = "lan1";
 128                 };
 129
 130                 port@4 {
 131                         status = "okay";
 132                         label = "wan";
 133                         nvmem-cells = <&macaddr_factory_4>;
 134                         nvmem-cell-names = "mac-address";
 135                         mac-address-increment = <(-1)>;
 136                 };
 137         };
 138 };
 139
 140 &state_default {
 141         gpio {
 142                 groups = "uart2", "jtag", "wdt";
 143                 function = "gpio";
 144         };
 145 };
 146
 147 &xhci {
 148         status = "disabled";
 149 };
 150
 151 &factory {
 152         compatible = "nvmem-cells";
 153         #address-cells = <1>;
 154         #size-cells = <1>;
 155
 156         macaddr_factory_4: macaddr@4 {
 157                 reg = <0x4 0x6>;
 158         };
 159 };