target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 [ "$ACTION" == "add" ] || exit 0
   2
   3 PHYNBR=${DEVPATH##*/phy}
   4
   5 [ -n $PHYNBR ] || exit 0
   6
   7 . /lib/functions.sh
   8 . /lib/functions/system.sh
   9
  10 board=$(board_name)
  11
  12 case "$board" in
  13         beeline,smartbox-flash)
  14                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
  15                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  16                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 26)
  17                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 27)
  18                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
  19                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
  20                 ;;
  21         cudy,x6)
  22                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  23                 macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dir-853-a3)
  26                 [ "$PHYNBR" = "0" ] && \
  27                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
  28                                 > /sys${DEVPATH}/macaddress
  29                 ;;
  30         dlink,dir-853-r1|\
  31         phicomm,k2p)
  32                 if [ "$PHYNBR" = "0" ]; then
  33                         base_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" -1)
  34                         macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
  35                 fi
  36                 ;;
  37         glinet,gl-mt1300)
  38                 [ "$PHYNBR" = "1" ] && \
  39                         macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
  40                 ;;
  41         h3c,tx1800-plus|\
  42         h3c,tx1801-plus|\
  43         h3c,tx1806)
  44                 addr=$(macaddr_setbit $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) 7)
  45                 [ "$PHYNBR" = "0" ] && echo -n ${addr:0:9}'1'${addr:10:7} > /sys${DEVPATH}/macaddress
  46                 [ "$PHYNBR" = "1" ] && echo -n ${addr:0:9}'7'${addr:10:7} > /sys${DEVPATH}/macaddress
  47                 ;;
  48         haier,har-20s2u1|\
  49         jcg,y2|\
  50         sim,simax1800t)
  51                 [ "$PHYNBR" = "1" ] && \
  52                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
  53                 ;;
  54         hiwifi,hc5962)
  55                 label_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
  56                 [ "$PHYNBR" = "0" ] && [ -n "$label_mac" ] && \
  57                 echo -n "$label_mac" > /sys${DEVPATH}/macaddress
  58                 [ "$PHYNBR" = "1" ] && [ -n "$label_mac" ] && \
  59                 macaddr_unsetbit "$label_mac" 6 > /sys${DEVPATH}/macaddress
  60                 ;;
  61         iptime,a3002mesh|\
  62         iptime,a3004t)
  63                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  64                 [ "$PHYNBR" = "0" ] && \
  65                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  66                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  67                 ;;
  68         iptime,ax2004m)
  69                 if [ "$PHYNBR" = "1" ]; then
  70                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  71                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  72                 fi
  73                 ;;
  74         jcg,q20)
  75                 [ "$PHYNBR" = "1" ] && \
  76                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
  77                 ;;
  78         linksys,e5600|\
  79         linksys,ea6350-v4|\
  80         linksys,ea7300-v1|\
  81         linksys,ea7300-v2|\
  82         linksys,ea7500-v2|\
  83         linksys,ea8100-v1|\
  84         linksys,ea8100-v2)
  85                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  86                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  87                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  88                 ;;
  89         belkin,rt1800|\
  90         linksys,e7350)
  91                 hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
  92                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  93                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  94                 ;;
  95         netgear,wax202)
  96                 hw_mac_addr=$(mtd_get_mac_ascii Config mac)
  97                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  98                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
  99                 ;;
 100         mts,wg430223)
 101                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
 102                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 103                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 26)
 104                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 27)
 105                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
 106                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
 107                 ;;
 108         oraybox,x3a)
 109                 if [ "$PHYNBR" = "1" ]; then
 110                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 111                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
 112                 fi
 113                 ;;
 114         raisecom,msg1500-x-00)
 115                 [ "$PHYNBR" = "0" ] && \
 116                         macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
 117                                 > /sys${DEVPATH}/macaddress
 118                 ;;
 119         tenbay,t-mb5eu-v01)
 120                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 121                 [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 122                 ;;
 123         tplink,eap615-wall-v1)
 124                 hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
 125                 macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
 126                 ;;
 127         yuncore,ax820)
 128                 [ "$PHYNBR" = "1" ] && \
 129                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
 130                 ;;
 131         yuncore,fap640|\
 132         yuncore,fap690)
 133                 hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
 134                 [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 135                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 136                 ;;
 137         zyxel,nwa50ax|\
 138         zyxel,nwa55axe)
 139                 hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
 140                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 141                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 142                 ;;
 143 esac