brcm2708: remove linux 4.4 support

[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.4 / 0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch

diff --git a/target/linux/brcm2708/patches-4.4/0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch b/target/linux/brcm2708/patches-4.4/0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch
deleted file mode 100644 (file)
index ebbc6c0..0000000
--- a/target/linux/brcm2708/patches-4.4/0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From bc573ada196b56eea95c1cca6520b916ec06660a Mon Sep 17 00:00:00 2001
-From: Daniel Matuschek <info@crazy-audio.com>
-Date: Wed, 15 Jan 2014 21:41:23 +0100
-Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit
- support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most
- sample rates. At 192kHz only 128xfs is supported. The existing driver selects
- 128xfs automatically for some lower samples rates. By using an additional
- mclk_div divider, it is now possible to control the behaviour. This allows
- using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow
- lower jitter and better signal quality. The behavior has to be controlled by
- the sound card driver, because some sample frequency share the same setting.
- e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the
- MCLK divider.
-
-This also added support for 32bit data.
-
-Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
----
- sound/soc/codecs/wm8804.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/sound/soc/codecs/wm8804.c
-+++ b/sound/soc/codecs/wm8804.c
-@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_p
-               blen = 0x1;
-               break;
-       case 24:
-+      case 32:
-               blen = 0x2;
-               break;
-       default:
-@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm88
- };
- 
- #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
--                      SNDRV_PCM_FMTBIT_S24_LE)
-+                      SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
- 
- #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
-                     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \