target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9557.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_power_green;
  15                 led-failsafe = &led_power_amber;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_amber;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         led_spi {
  22                 compatible = "spi-gpio";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25
  26                 sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  27                 mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  28                 num-chipselects = <0>;
  29
  30                 led_gpio: led_gpio@0 {
  31                         compatible = "nxp,74lvc594";
  32                         reg = <0>;
  33                         gpio-controller;
  34                         #gpio-cells = <2>;
  35                         registers-number = <1>;
  36                         spi-max-frequency = <500000>;
  37
  38                         gpio_latch_bit {
  39                                 gpio-hog;
  40                                 gpios = <4 GPIO_ACTIVE_HIGH>;
  41                                 output-high;
  42                                 line-name = "gpio-latch-bit";
  43                         };
  44                 };
  45         };
  46
  47         leds {
  48                 compatible = "gpio-leds";
  49
  50                 led_power_green: power_green {
  51                         label = "netgear:green:power";
  52                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_power_amber: power_amber {
  56                         label = "netgear:amber:power";
  57                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 left_blue {
  61                         label = "netgear:blue:left";
  62                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 right_blue {
  66                         label = "netgear:blue:right";
  67                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wps_green {
  71                         label = "netgear:green:wps";
  72                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 client_red {
  76                         label = "netgear:red:client";
  77                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 client_green {
  81                         label = "netgear:green:client";
  82                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 router_red {
  86                         label = "netgear:red:router";
  87                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 router_green {
  91                         label = "netgear:green:router";
  92                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         keys {
  97                 compatible = "gpio-keys";
  98
  99                 reset {
 100                         label = "Reset button";
 101                         linux,code = <KEY_RESTART>;
 102                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 103                         debounce-interval = <60>;
 104                 };
 105
 106                 wps {
 107                         label = "WPS button";
 108                         linux,code = <KEY_WPS_BUTTON>;
 109                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 110                         debounce-interval = <60>;
 111                 };
 112
 113                 extender_apmode {
 114                         label = "EXTENDER/APMODE switch";
 115                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 116                         linux,code = <BTN_0>;
 117                         linux,input-type = <EV_SW>;
 118                         debounce-interval = <60>;
 119                 };
 120         };
 121 };
 122
 123 &pcie0 {
 124         status = "okay";
 125 };
 126
 127 &uart {
 128         status = "okay";
 129 };
 130
 131 &pll {
 132         clocks = <&extosc>;
 133 };
 134
 135 &spi {
 136         status = "okay";
 137
 138         num-cs = <1>;
 139
 140         flash@0 {
 141                 compatible = "jedec,spi-nor";
 142                 reg = <0>;
 143                 spi-max-frequency = <25000000>;
 144
 145                 partitions {
 146                         compatible = "fixed-partitions";
 147                         #address-cells = <1>;
 148                         #size-cells = <1>;
 149
 150                         uboot: partition@0 {
 151                                 label = "u-boot";
 152                                 reg = <0x000000 0x040000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@40000 {
 157                                 label = "u-boot-env";
 158                                 reg = <0x040000 0x010000>;
 159                         };
 160
 161                         caldata: partition@50000 {
 162                                 label = "caldata";
 163                                 reg = <0x050000 0x010000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@60000 {
 168                                 label = "caldata-backup";
 169                                 reg = <0x060000 0x010000>;
 170                                 read-only;
 171                         };
 172
 173                         partition@70000 {
 174                                 label = "config";
 175                                 reg = <0x070000 0x010000>;
 176                         };
 177
 178                         partition@80000 {
 179                                 label = "pot";
 180                                 reg = <0x080000 0x010000>;
 181                         };
 182
 183                         partition@90000 {
 184                                 label = "firmware";
 185                                 reg = <0x090000 0xf30000>;
 186                                 compatible = "denx,uimage";
 187                         };
 188
 189                         partition@fc0000 {
 190                                 label = "language";
 191                                 reg = <0xfc0000 0x040000>;
 192                         };
 193                 };
 194         };
 195 };
 196
 197 &wmac {
 198         status = "okay";
 199
 200         mtd-cal-data = <&caldata 0x1000>;
 201         mtd-mac-address = <&caldata 0x06>;
 202 };
 203
 204 &mdio0 {
 205         status = "okay";
 206
 207         phy4: ethernet-phy@4 {
 208                 reg = <4>;
 209                 phy-mode = "rgmii";
 210         };
 211 };
 212
 213 &eth0 {
 214         status = "okay";
 215
 216         mtd-mac-address = <&caldata 0x00>;
 217
 218         phy-handle = <&phy4>;
 219         phy-mode = "rgmii-rxid";
 220
 221         pll-data = <0x86000000 0x80000101 0x80001313>;
 222 };