target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9557.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth1;
  19         };
  20
  21         leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 usb1 {
  31                         label = "tp-link:green:usb1";
  32                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  33                         trigger-sources = <&hub_port1>;
  34                         linux,default-trigger = "usbport";
  35                 };
  36
  37                 usb2 {
  38                         label = "tp-link:green:usb2";
  39                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  40                         trigger-sources = <&hub_port0>;
  41                         linux,default-trigger = "usbport";
  42                 };
  43
  44                 wlan2g {
  45                         label = "tp-link:green:wlan2g";
  46                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "phy1tpt";
  48                 };
  49
  50                 qss {
  51                         label = "tp-link:green:qss";
  52                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         keys: keys {
  57                 compatible = "gpio-keys";
  58
  59                 reset {
  60                         label = "Reset button";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  63                         debounce-interval = <60>;
  64                 };
  65         };
  66
  67         gpio-export {
  68                 compatible = "gpio-export";
  69
  70                 gpio_usb1_power {
  71                         gpio-export,name = "tp-link:power:usb1";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 gpio_usb2_power {
  77                         gpio-export,name = "tp-link:power:usb2";
  78                         gpio-export,output = <1>;
  79                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82 };
  83
  84 &pcie1 {
  85         status = "okay";
  86 };
  87
  88 &uart {
  89         status = "okay";
  90 };
  91
  92 &gpio {
  93         status = "okay";
  94 };
  95
  96 &usb_phy0 {
  97         status = "okay";
  98 };
  99
 100 &usb0 {
 101         #address-cells = <1>;
 102         #size-cells = <0>;
 103         status = "okay";
 104
 105         hub_port0: port@1 {
 106                 reg = <1>;
 107                 #trigger-source-cells = <0>;
 108         };
 109 };
 110
 111 &usb_phy1 {
 112         status = "okay";
 113 };
 114
 115 &usb1 {
 116         #address-cells = <1>;
 117         #size-cells = <0>;
 118         status = "okay";
 119
 120         hub_port1: port@1 {
 121                 reg = <1>;
 122                 #trigger-source-cells = <0>;
 123         };
 124 };
 125
 126 &spi {
 127         status = "okay";
 128
 129         num-cs = <1>;
 130
 131         flash@0 {
 132                 compatible = "jedec,spi-nor";
 133                 reg = <0>;
 134                 spi-max-frequency = <25000000>;
 135
 136                 mtdparts: partitions {
 137                         compatible = "fixed-partitions";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140                 };
 141         };
 142 };
 143
 144 &mdio0 {
 145         status = "okay";
 146
 147         phy0: ethernet-phy@0 {
 148                 reg = <0>;
 149
 150                 qca,ar8327-initvals = <
 151                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 152                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 153                         0x50 0xc737c737 /* LED_CTRL0 */
 154                         0x54 0x00000000 /* LED_CTRL1 */
 155                         0x58 0x00000000 /* LED_CTRL2 */
 156                         0x5c 0x0030c300 /* LED_CTRL3 */
 157                         0x7c 0x0000007e /* PORT0_STATUS */
 158                         0x94 0x0000007e /* PORT6 STATUS */
 159                         >;
 160         };
 161 };
 162
 163 &eth0 {
 164         status = "okay";
 165
 166         mtd-mac-address = <&uboot 0x1fc00>;
 167         mtd-mac-address-increment = <1>;
 168         phy-handle = <&phy0>;
 169         pll-data = <0x56000000 0x00000101 0x00001616>;
 170
 171         gmac-config {
 172                 device = <&gmac>;
 173                 rgmii-enabled = <1>;
 174         };
 175 };
 176
 177 &eth1 {
 178         status = "okay";
 179
 180         mtd-mac-address = <&uboot 0x1fc00>;
 181         pll-data = <0x03000101 0x00000101 0x00001616>;
 182
 183         fixed-link {
 184                 speed = <1000>;
 185                 full-duplex;
 186         };
 187 };
 188
 189 &wmac {
 190         status = "okay";
 191
 192         mtd-cal-data = <&art 0x1000>;
 193         mtd-mac-address = <&uboot 0x1fc00>;
 194 };