target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tenda,w150m", "ralink,rt3050-soc";
  10         model = "Tenda W150M";
  11
  12         aliases {
  13                 led-boot = &led_ap;
  14                 led-failsafe = &led_ap;
  15                 led-running = &led_ap;
  16                 led-upgrade = &led_ap;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 label = "firmware";
  50                                 reg = <0x50000 0x3c8000>;
  51                         };
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57
  58                 3grouter {
  59                         label = "w150m:blue:3grouter";
  60                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 led_ap: ap {
  64                         label = "w150m:blue:ap";
  65                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 wisprouter {
  69                         label = "w150m:blue:wisprouter";
  70                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 wirelessrouter {
  74                         label = "w150m:blue:wirelessrouter";
  75                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 3g {
  79                         label = "w150m:blue:3g";
  80                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 wpsreset {
  84                         label = "w150m:blue:wpsreset";
  85                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  86                 };
  87         };
  88
  89         gpio-keys-polled {
  90                 compatible = "gpio-keys-polled";
  91                 poll-interval = <20>;
  92
  93                 reset {
  94                         label = "reset";
  95                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_RESTART>;
  97                 };
  98
  99                 mode {
 100                         label = "mode";
 101                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 102                         linux,code = <BTN_0>;
 103                 };
 104         };
 105 };
 106
 107 &pinctrl {
 108         state_default: pinctrl0 {
 109                 gpio {
 110                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 111                         ralink,function = "gpio";
 112                 };
 113         };
 114 };
 115
 116 &ethernet {
 117         mtd-mac-address = <&factory 0x4>;
 118 };
 119
 120 &esw {
 121         mediatek,portmap = <0x2f>;
 122 };
 123
 124 &wmac {
 125         ralink,mtd-eeprom = <&factory 0>;
 126 };