target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mediatek,mt7621-soc";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16                 label-mac-device = &ethernet;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_usb: usb {
  31                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  32                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  33                         linux,default-trigger = "usbport";
  34                 };
  35
  36                 led_internet: internet {
  37                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_wifi: wifi {
  41                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44         };
  45
  46         keys {
  47                 compatible = "gpio-keys";
  48
  49                 wps {
  50                         label = "wps";
  51                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_WPS_BUTTON>;
  53                 };
  54
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60         };
  61
  62         reg_usb_vbus: regulator {
  63                 compatible = "regulator-fixed";
  64                 regulator-name = "usb_vbus";
  65                 regulator-min-microvolt = <5000000>;
  66                 regulator-max-microvolt = <5000000>;
  67                 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
  68                 enable-active-high;
  69         };
  70 };
  71
  72 &xhci {
  73         vbus-supply = <&reg_usb_vbus>;
  74 };
  75
  76 &pcie {
  77         status = "okay";
  78 };
  79
  80 &pcie0 {
  81         wifi@0,0 {
  82                 compatible = "mediatek,mt76";
  83                 reg = <0x0 0 0 0 0>;
  84                 mediatek,mtd-eeprom = <&factory 0x8000>;
  85                 ieee80211-freq-limit = <5000000 6000000>;
  86         };
  87 };
  88
  89 &pcie1 {
  90         wifi@0,0 {
  91                 compatible = "mediatek,mt76";
  92                 reg = <0x0 0 0 0 0>;
  93                 mediatek,mtd-eeprom = <&factory 0x0>;
  94                 ieee80211-freq-limit = <2400000 2500000>;
  95         };
  96 };
  97
  98 &ethernet {
  99         mtd-mac-address = <&factory 0x4>;
 100 };
 101
 102 &pinctrl {
 103         state_default: pinctrl0 {
 104                 gpio {
 105                         ralink,group = "uart3", "uart2", "jtag", "wdt";
 106                         ralink,function = "gpio";
 107                 };
 108         };
 109 };
 110
 111 &nand {
 112         status = "okay";
 113
 114         partitions {
 115                 compatible = "fixed-partitions";
 116                 #address-cells = <1>;
 117                 #size-cells = <1>;
 118
 119                 partition@0 {
 120                         label = "u-boot";
 121                         reg = <0x0 0x100000>;
 122                         read-only;
 123                 };
 124
 125                 partition@100000 {
 126                         label = "SC PART_MAP";
 127                         reg = <0x100000 0x100000>;
 128                         read-only;
 129                 };
 130
 131                 partition@200000 {
 132                         label = "kernel";
 133                         reg = <0x200000 0x400000>;
 134                 };
 135
 136                 partition@600000 {
 137                         label = "ubi";
 138                         reg = <0x600000 0x2800000>;
 139                 };
 140
 141                 partition@2e00000 {
 142                         label = "reserved0";
 143                         reg = <0x2e00000 0x1800000>;
 144                         read-only;
 145                 };
 146
 147                 factory: partition@4600000 {
 148                         label = "factory";
 149                         reg = <0x4600000 0x200000>;
 150                         read-only;
 151                 };
 152
 153                 partition@4800000 {
 154                         label = "reserved1";
 155                         reg = <0x4800000 0x3800000>;
 156                         read-only;
 157                 };
 158         };
 159 };