target/linux/bcm27xx/patches-5.15/950-0560-ARM-dt-Add-DT-nodes-for-the-WLAN-interfaces.patch

   1 From 5676ad01fda218675624294b2818720ea806bf87 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.com>
   3 Date: Tue, 26 Oct 2021 16:38:44 +0100
   4 Subject: [PATCH] ARM: dt: Add DT nodes for the WLAN interfaces
   5
   6 Mirror upstream changes into the downstream dts files.
   7
   8 Signed-off-by: Phil Elwell <phil@raspberrypi.com>
   9 ---
  10  arch/arm/boot/dts/bcm2708-rpi-zero-w.dts   | 7 +++++++
  11  arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 7 +++++++
  12  arch/arm/boot/dts/bcm2710-rpi-3-b.dts      | 7 +++++++
  13  arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts | 7 +++++++
  14  4 files changed, 28 insertions(+)
  15
  16 --- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
  17 +++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
  18 @@ -83,6 +83,13 @@
  19         pinctrl-0 = <&sdio_pins>;
  20         bus-width = <4>;
  21         status = "okay";
  22 +       #address-cells = <1>;
  23 +       #size-cells = <0>;
  24 +
  25 +       brcmf: wifi@1 {
  26 +               reg = <1>;
  27 +               compatible = "brcm,bcm4329-fmac";
  28 +       };
  29  };
  30
  31  &uart0 {
  32 --- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
  33 +++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
  34 @@ -84,6 +84,13 @@
  35         pinctrl-0 = <&sdio_pins>;
  36         bus-width = <4>;
  37         status = "okay";
  38 +       #address-cells = <1>;
  39 +       #size-cells = <0>;
  40 +
  41 +       brcmf: wifi@1 {
  42 +               reg = <1>;
  43 +               compatible = "brcm,bcm4329-fmac";
  44 +       };
  45  };
  46
  47  &firmware {
  48 --- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
  49 +++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
  50 @@ -84,6 +84,13 @@
  51         pinctrl-0 = <&sdio_pins>;
  52         bus-width = <4>;
  53         status = "okay";
  54 +       #address-cells = <1>;
  55 +       #size-cells = <0>;
  56 +
  57 +       brcmf: wifi@1 {
  58 +               reg = <1>;
  59 +               compatible = "brcm,bcm4329-fmac";
  60 +       };
  61  };
  62
  63  &soc {
  64 --- a/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
  65 +++ b/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts
  66 @@ -83,6 +83,13 @@
  67         pinctrl-0 = <&sdio_pins>;
  68         bus-width = <4>;
  69         status = "okay";
  70 +       #address-cells = <1>;
  71 +       #size-cells = <0>;
  72 +
  73 +       brcmf: wifi@1 {
  74 +               reg = <1>;
  75 +               compatible = "brcm,bcm4329-fmac";
  76 +       };
  77  };
  78
  79  &uart0 {