target/linux/ramips/dts/TL-WR902ACV3.dts

   1 /dts-v1/;
   2
   3 #include "TPLINK-8M.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
  10         model = "TP-Link TL-WR902AC v3";
  11
  12         gpio-keys-polled {
  13                 compatible = "gpio-keys-polled";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23
  24                 sw1 {
  25                         label = "sw1";
  26                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  27                         linux,code = <BTN_0>;
  28                 };
  29
  30                 sw2 {
  31                         label = "sw2";
  32                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  33                         linux,code = <BTN_1>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 lan {
  47                         label = "tl-wr902ac-v3:green:lan";
  48                         gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 power {
  52                         label = "tl-wr902ac-v3:green:power";
  53                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 usb {
  57                         label = "tl-wr902ac-v3:green:usb";
  58                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wan {
  62                         label = "tl-wr902ac-v3:green:wan";
  63                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wlan {
  67                         label = "tl-wr902ac-v3:green:wlan";
  68                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wps {
  72                         label = "tl-wr902ac-v3:green:wps";
  73                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76 };
  77
  78 &pinctrl {
  79         state_default: pinctrl0 {
  80                 gpio {
  81                         ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
  82                         ralink,function = "gpio";
  83                 };
  84         };
  85 };
  86
  87 &ehci {
  88         status = "okay";
  89 };
  90
  91 &ohci {
  92         status = "okay";
  93 };
  94
  95 &pcie {
  96         status = "okay";
  97
  98         pcie-bridge {
  99                 mt76@1,0 {
 100                         reg = <0x0000 0 0 0 0>;
 101                         device_type = "pci";
 102                         mediatek,mtd-eeprom = <&factory 0x28000>;
 103                         ieee80211-freq-limit = <5000000 6000000>;
 104                         mtd-mac-address = <&factory 0xf100>;
 105                         mtd-mac-address-increment = <(-1)>;
 106                 };
 107         };
 108 };