target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 R7500v2";
   7         compatible = "netgear,r7500v2", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &uart4;
  26                 mdio-gpio0 = &mdio0;
  27         };
  28
  29         chosen {
  30                 bootargs = "rootfstype=squashfs noinitrd";
  31                 linux,stdout-path = "serial0:115200n8";
  32         };
  33
  34         soc {
  35                 pinmux@800000 {
  36                         i2c4_pins: i2c4_pinmux {
  37                                 pins = "gpio12", "gpio13";
  38                                 function = "gsbi4";
  39                                 bias-disable;
  40                         };
  41
  42                         nand_pins: nand_pins {
  43                                 mux {
  44                                         pins = "gpio34", "gpio35", "gpio36",
  45                                                "gpio37", "gpio38", "gpio39",
  46                                                "gpio40", "gpio41", "gpio42",
  47                                                "gpio43", "gpio44", "gpio45",
  48                                                "gpio46", "gpio47";
  49                                         function = "nand";
  50                                         drive-strength = <10>;
  51                                         bias-disable;
  52                                 };
  53                                 pullups {
  54                                         pins = "gpio39";
  55                                         bias-pull-up;
  56                                 };
  57                                 hold {
  58                                         pins = "gpio40", "gpio41", "gpio42",
  59                                                "gpio43", "gpio44", "gpio45",
  60                                                "gpio46", "gpio47";
  61                                         bias-bus-hold;
  62                                 };
  63                         };
  64
  65                         mdio0_pins: mdio0_pins {
  66                                 mux {
  67                                         pins = "gpio0", "gpio1";
  68                                         function = "gpio";
  69                                         drive-strength = <8>;
  70                                         bias-disable;
  71                                 };
  72                         };
  73
  74                         rgmii2_pins: rgmii2_pins {
  75                                 mux {
  76                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  77                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  78                                         function = "rgmii2";
  79                                         drive-strength = <8>;
  80                                         bias-disable;
  81                                 };
  82                         };
  83                 };
  84
  85                 gsbi@16300000 {
  86                         qcom,mode = <GSBI_PROT_I2C_UART>;
  87                         status = "ok";
  88                         serial@16340000 {
  89                                 status = "ok";
  90                         };
  91                         /*
  92                          * The i2c device on gsbi4 should not be enabled.
  93                          * On ipq806x designs gsbi4 i2c is meant for exclusive
  94                          * RPM usage. Turning this on in kernel manifests as
  95                          * i2c failure for the RPM.
  96                          */
  97                 };
  98
  99                 sata-phy@1b400000 {
 100                         status = "ok";
 101                 };
 102
 103                 sata@29000000 {
 104                         status = "ok";
 105                 };
 106
 107                 phy@100f8800 {          /* USB3 port 1 HS phy */
 108                         status = "ok";
 109                 };
 110
 111                 phy@100f8830 {          /* USB3 port 1 SS phy */
 112                         status = "ok";
 113                 };
 114
 115                 phy@110f8800 {          /* USB3 port 0 HS phy */
 116                         status = "ok";
 117                 };
 118
 119                 phy@110f8830 {          /* USB3 port 0 SS phy */
 120                         status = "ok";
 121                 };
 122
 123                 usb30@0 {
 124                         status = "ok";
 125                 };
 126
 127                 usb30@1 {
 128                         status = "ok";
 129                 };
 130
 131                 pcie0: pci@1b500000 {
 132                         status = "ok";
 133                         reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 134                         pinctrl-0 = <&pcie0_pins>;
 135                         pinctrl-names = "default";
 136                 };
 137
 138                 pcie1: pci@1b700000 {
 139                         status = "ok";
 140                         reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 141                         pinctrl-0 = <&pcie1_pins>;
 142                         pinctrl-names = "default";
 143                 };
 144
 145                 nand@1ac00000 {
 146                         status = "ok";
 147
 148                         pinctrl-0 = <&nand_pins>;
 149                         pinctrl-names = "default";
 150
 151                         nand-ecc-strength = <4>;
 152                         nand-bus-width = <8>;
 153
 154                         #address-cells = <1>;
 155                         #size-cells = <1>;
 156
 157                         qcadata@0 {
 158                                 label = "qcadata";
 159                                 reg = <0x0000000 0x0c80000>;
 160                                 read-only;
 161                         };
 162
 163                         APPSBL@c80000 {
 164                                 label = "APPSBL";
 165                                 reg = <0x0c80000 0x0500000>;
 166                                 read-only;
 167                         };
 168
 169                         APPSBLENV@1180000 {
 170                                 label = "APPSBLENV";
 171                                 reg = <0x1180000 0x0080000>;
 172                                 read-only;
 173                         };
 174
 175                         art: art@1200000 {
 176                                 label = "art";
 177                                 reg = <0x1200000 0x0140000>;
 178                                 read-only;
 179                         };
 180
 181                         artbak: art@1340000 {
 182                                 label = "artbak";
 183                                 reg = <0x1340000 0x0140000>;
 184                                 read-only;
 185                         };
 186
 187                         kernel@1480000 {
 188                                 label = "kernel";
 189                                 reg = <0x1480000 0x0200000>;
 190                         };
 191
 192                         ubi@1680000 {
 193                                 label = "ubi";
 194                                 reg = <0x1680000 0x1E00000>;
 195                         };
 196
 197                         netgear@3480000 {
 198                                 label = "netgear";
 199                                 reg = <0x3480000 0x4480000>;
 200                                 read-only;
 201                         };
 202
 203                         reserve@7900000 {
 204                                 label = "reserve";
 205                                 reg = <0x7900000 0x0700000>;
 206                                 read-only;
 207                         };
 208
 209                         firmware@1480000 {
 210                                 label = "firmware";
 211                                 reg = <0x1480000 0x2000000>;
 212                         };
 213
 214                 };
 215
 216                 mdio0: mdio {
 217                         compatible = "virtual,mdio-gpio";
 218                         #address-cells = <1>;
 219                         #size-cells = <0>;
 220                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 221                         pinctrl-0 = <&mdio0_pins>;
 222                         pinctrl-names = "default";
 223
 224                         phy0: ethernet-phy@0 {
 225                                 device_type = "ethernet-phy";
 226                                 reg = <0>;
 227                                 qca,ar8327-initvals = <
 228                                         0x00004 0x7600000   /* PAD0_MODE */
 229                                         0x00008 0x1000000   /* PAD5_MODE */
 230                                         0x0000c 0x80        /* PAD6_MODE */
 231                                         0x000e4 0xaa545     /* MAC_POWER_SEL */
 232                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 233                                         0x0007c 0x4e        /* PORT0_STATUS */
 234                                         0x00094 0x4e        /* PORT6_STATUS */
 235                                         >;
 236                         };
 237
 238                         phy4: ethernet-phy@4 {
 239                                 device_type = "ethernet-phy";
 240                                 reg = <4>;
 241                         };
 242                 };
 243
 244                 gmac1: ethernet@37200000 {
 245                         status = "ok";
 246                         phy-mode = "rgmii";
 247                         qcom,id = <1>;
 248
 249                         pinctrl-0 = <&rgmii2_pins>;
 250                         pinctrl-names = "default";
 251
 252                         mtd-mac-address = <&art 6>;
 253
 254                         fixed-link {
 255                                 speed = <1000>;
 256                                 full-duplex;
 257                         };
 258                 };
 259
 260                 gmac2: ethernet@37400000 {
 261                         status = "ok";
 262                         phy-mode = "sgmii";
 263                         qcom,id = <2>;
 264
 265                         mtd-mac-address = <&art 0>;
 266
 267                         fixed-link {
 268                                 speed = <1000>;
 269                                 full-duplex;
 270                         };
 271                 };
 272         };
 273
 274         gpio-keys {
 275                 compatible = "gpio-keys";
 276
 277                 wifi {
 278                         label = "wifi";
 279                         gpios = <&qcom_pinmux 6 1>;
 280                         linux,code = <KEY_WLAN>;
 281                 };
 282
 283                 reset {
 284                         label = "reset";
 285                         gpios = <&qcom_pinmux 54 1>;
 286                         linux,code = <KEY_RESTART>;
 287                 };
 288
 289                 wps {
 290                         label = "wps";
 291                         gpios = <&qcom_pinmux 65 1>;
 292                         linux,code = <KEY_WPS_BUTTON>;
 293                 };
 294         };
 295
 296         gpio-leds {
 297                 compatible = "gpio-leds";
 298
 299                 usb1 {
 300                         label = "r7500v2:amber:usb1";
 301                         gpios = <&qcom_pinmux 7 0>;
 302                 };
 303
 304                 usb3 {
 305                         label = "r7500v2:amber:usb3";
 306                         gpios = <&qcom_pinmux 8 0>;
 307                 };
 308
 309                 status {
 310                         label = "r7500v2:amber:status";
 311                         gpios = <&qcom_pinmux 9 0>;
 312                 };
 313
 314                 internet {
 315                         label = "r7500v2:white:internet";
 316                         gpios = <&qcom_pinmux 22 0>;
 317                 };
 318
 319                 wan {
 320                         label = "r7500v2:white:wan";
 321                         gpios = <&qcom_pinmux 23 0>;
 322                 };
 323
 324                 wps {
 325                         label = "r7500v2:white:wps";
 326                         gpios = <&qcom_pinmux 24 0>;
 327                 };
 328
 329                 esata {
 330                         label = "r7500v2:white:esata";
 331                         gpios = <&qcom_pinmux 26 0>;
 332                 };
 333
 334                 power {
 335                         label = "r7500v2:white:power";
 336                         gpios = <&qcom_pinmux 53 0>;
 337                         default-state = "on";
 338                 };
 339
 340                 rfkill {
 341                         label = "r7500v2:white:rfkill";
 342                         gpios = <&qcom_pinmux 64 0>;
 343                 };
 344
 345         };
 346 };
 347
 348 &adm_dma {
 349         status = "ok";
 350 };