target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
   8         model = "AVM FRITZ!Box 3370 Rev. 2";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18                 led-upgrade = &power_red;
  19
  20                 led-dsl = &dsl;
  21                 led-internet = &info_green;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x8000000>;
  28         };
  29
  30         gpio-poweroff {
  31                 compatible = "gpio-poweroff";
  32                 gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys-polled";
  37                 poll-interval = <100>;
  38
  39                 power {
  40                         label = "power";
  41                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  42                         linux,code = <KEY_POWER>;
  43                 };
  44
  45                 wifi {
  46                         label = "wlan";
  47                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
  48                         linux,code = <KEY_WLAN>;
  49                 };
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54
  55                 power_green: power {
  56                         label = "fritz3370:green:power";
  57                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  58                         default-state = "keep";
  59                 };
  60
  61                 power_red: power2 {
  62                         label = "fritz3370:red:power";
  63                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 info_red {
  67                         label = "fritz3370:red:info";
  68                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wifi: wifi {
  72                         label = "fritz3370:green:wlan";
  73                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 dsl: dsl {
  77                         label = "fritz3370:green:dsl";
  78                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 lan {
  82                         label = "fritz3370:green:lan";
  83                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 info_green: info_green {
  87                         label = "fritz3370:green:info";
  88                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91
  92         usb0_vbus: regulator-usb0-vbus {
  93                 compatible = "regulator-fixed";
  94
  95                 regulator-name = "USB0_VBUS";
  96
  97                 regulator-min-microvolt = <5000000>;
  98                 regulator-max-microvolt = <5000000>;
  99
 100                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
 101                 enable-active-high;
 102         };
 103
 104         usb1_vbus: regulator-usb1-vbus {
 105                 compatible = "regulator-fixed";
 106
 107                 regulator-name = "USB1_VBUS";
 108
 109                 regulator-min-microvolt = <5000000>;
 110                 regulator-max-microvolt = <5000000>;
 111
 112                 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
 113                 enable-active-high;
 114         };
 115 };
 116
 117 &eth0 {
 118         lan: interface@0 {
 119                 compatible = "lantiq,xrx200-pdi";
 120                 #address-cells = <1>;
 121                 #size-cells = <0>;
 122                 reg = <0>;
 123                 lantiq,switch;
 124
 125                 ethernet@0 {
 126                         compatible = "lantiq,xrx200-pdi-port";
 127                         reg = <0>;
 128                         phy-mode = "rgmii";
 129                         phy-handle = <&phy0>;
 130                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 131                 };
 132
 133                 ethernet@1 {
 134                         compatible = "lantiq,xrx200-pdi-port";
 135                         reg = <1>;
 136                         phy-mode = "rgmii";
 137                         phy-handle = <&phy1>;
 138                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 139                 };
 140
 141                 ethernet@2 {
 142                         compatible = "lantiq,xrx200-pdi-port";
 143                         reg = <2>;
 144                         phy-mode = "gmii";
 145                         phy-handle = <&phy11>;
 146                 };
 147
 148                 ethernet@4 {
 149                         compatible = "lantiq,xrx200-pdi-port";
 150                         reg = <4>;
 151                         phy-mode = "gmii";
 152                         phy-handle = <&phy13>;
 153                 };
 154         };
 155
 156         mdio {
 157                 #address-cells = <1>;
 158                 #size-cells = <0>;
 159                 compatible = "lantiq,xrx200-mdio";
 160
 161                 phy0: ethernet-phy@0 {
 162                         reg = <0x0>;
 163                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 164                 };
 165
 166                 phy1: ethernet-phy@1 {
 167                         reg = <0x1>;
 168                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 169                 };
 170
 171                 phy11: ethernet-phy@11 {
 172                         reg = <0x11>;
 173                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 174                 };
 175
 176                 phy13: ethernet-phy@13 {
 177                         reg = <0x13>;
 178                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 179                 };
 180         };
 181 };
 182
 183 &gphy0 {
 184         lantiq,gphy-mode = <GPHY_MODE_GE>;
 185 };
 186
 187 &gphy1 {
 188         lantiq,gphy-mode = <GPHY_MODE_GE>;
 189 };
 190
 191 &gpio {
 192         pinctrl-names = "default";
 193         pinctrl-0 = <&state_default>;
 194
 195         state_default: pinmux {
 196                 phy-rst {
 197                         lantiq,pins = "io37", "io44";
 198                         lantiq,pull = <0>;
 199                         lantiq,open-drain = <0>;
 200                         lantiq,output = <1>;
 201                 };
 202
 203                 pcie-rst {
 204                         lantiq,pins = "io21";
 205                         lantiq,pull = <0>;
 206                         lantiq,output = <1>;
 207                 };
 208         };
 209 };
 210
 211 &pcie0 {
 212         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 213
 214         pcie@0 {
 215                 reg = <0 0 0 0 0>;
 216                 #interrupt-cells = <1>;
 217                 #size-cells = <2>;
 218                 #address-cells = <3>;
 219                 device_type = "pci";
 220
 221                 wifi@0,0 {
 222                         compatible = "pci0,0";
 223                         reg = <0 0 0 0 0>;
 224                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 225                 };
 226         };
 227 };
 228
 229 &spi {
 230         status = "okay";
 231
 232         flash@4 {
 233                 compatible = "jedec,spi-nor";
 234                 reg = <4>;
 235                 spi-max-frequency = <1000000>;
 236
 237                 partitions {
 238                         compatible = "fixed-partitions";
 239                         #address-cells = <1>;
 240                         #size-cells = <1>;
 241
 242                         urlader: partition@0 {
 243                                 reg = <0x0 0x20000>;
 244                                 label = "urlader";
 245                                 read-only;
 246                         };
 247
 248                         partition@20000 {
 249                                 reg = <0x20000 0x10000>;
 250                                 label = "tffs (1)";
 251                                 read-only;
 252                         };
 253
 254                         partition@30000 {
 255                                 reg = <0x30000 0x10000>;
 256                                 label = "tffs (2)";
 257                                 read-only;
 258                         };
 259                 };
 260         };
 261 };
 262
 263 &usb_phy0 {
 264         status = "okay";
 265 };
 266
 267 &usb_phy1 {
 268         status = "okay";
 269 };
 270
 271 &usb0 {
 272         status = "okay";
 273         vbus-supply = <&usb0_vbus>;
 274 };
 275
 276 &usb1 {
 277         status = "okay";
 278         vbus-supply = <&usb1_vbus>;
 279 };