target/linux/ramips/dts/MT7628.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
   7         model = "Mediatek MT7628AN evaluation board";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x2000000>;
  12         };
  13 };
  14
  15 &pinctrl {
  16         state_default: pinctrl0 {
  17                 gpio {
  18                         ralink,group = "i2c";
  19                         ralink,function = "gpio";
  20                 };
  21         };
  22 };
  23
  24 &wmac {
  25         status = "okay";
  26 };
  27
  28 &spi0 {
  29         status = "okay";
  30
  31         m25p80@0 {
  32                 compatible = "jedec,spi-nor";
  33                 reg = <0>;
  34                 spi-max-frequency = <10000000>;
  35
  36                 partitions {
  37                         compatible = "fixed-partitions";
  38                         #address-cells = <1>;
  39                         #size-cells = <1>;
  40
  41                         partition@0 {
  42                                 label = "u-boot";
  43                                 reg = <0x0 0x30000>;
  44                                 read-only;
  45                         };
  46
  47                         partition@30000 {
  48                                 label = "u-boot-env";
  49                                 reg = <0x30000 0x10000>;
  50                                 read-only;
  51                         };
  52
  53                         factory: partition@40000 {
  54                                 label = "factory";
  55                                 reg = <0x40000 0x10000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@50000 {
  60                                 compatible = "denx,uimage";
  61                                 label = "firmware";
  62                                 reg = <0x50000 0x7b0000>;
  63                         };
  64                 };
  65         };
  66 };
  67
  68 &wmac {
  69         status = "okay";
  70 };