target/linux/ramips/dts/mt7620a_netis_wf2770.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netis,wf2770", "ralink,mt7620a-soc";
  10         model = "NETIS WF2770";
  11
  12         leds {
  13                 compatible = "gpio-leds";
  14
  15                 wlan {
  16                         label = "blue:wlan";
  17                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  18                         linux,default-trigger = "phy0tpt";
  19                 };
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30
  31                 wps {
  32                         label = "wps";
  33                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                 };
  36
  37                 rfkill {
  38                         label = "rfkill";
  39                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RFKILL>;
  41                 };
  42
  43                 led-toggle {
  44                         label = "led-toggle";
  45                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_LIGHTS_TOGGLE>;
  47                 };
  48         };
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         flash@0 {
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 spi-max-frequency = <50000000>;
  58
  59                 partitions {
  60                         compatible = "fixed-partitions";
  61                         #address-cells = <1>;
  62                         #size-cells = <1>;
  63
  64                         partition@0 {
  65                                 label = "u-boot";
  66                                 reg = <0x0 0x30000>;
  67                                 read-only;
  68                         };
  69
  70                         partition@30000 {
  71                                 label = "config";
  72                                 reg = <0x30000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         factory: partition@40000 {
  77                                 label = "factory";
  78                                 reg = <0x40000 0x10000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@50000 {
  83                                 compatible = "denx,uimage";
  84                                 label = "firmware";
  85                                 reg = <0x50000 0xfb0000>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &state_default {
  92         gpio {
  93                 groups = "i2c", "uartf";
  94                 function = "gpio";
  95         };
  96 };
  97
  98 &ethernet {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 101
 102         mtd-mac-address = <&factory 0x4>;
 103
 104         port@5 {
 105                 status = "okay";
 106                 mediatek,fixed-link = <1000 1 1 1>;
 107                 phy-mode = "rgmii";
 108         };
 109
 110         mdio-bus {
 111                 status = "okay";
 112
 113                 ethernet-phy@0 {
 114                         reg = <0>;
 115                         phy-mode = "rgmii";
 116                 };
 117
 118                 ethernet-phy@1 {
 119                         reg = <1>;
 120                         phy-mode = "rgmii";
 121                 };
 122
 123                 ethernet-phy@2 {
 124                         reg = <2>;
 125                         phy-mode = "rgmii";
 126                 };
 127
 128                 ethernet-phy@3 {
 129                         reg = <3>;
 130                         phy-mode = "rgmii";
 131                 };
 132
 133                 ethernet-phy@4 {
 134                         reg = <4>;
 135                         phy-mode = "rgmii";
 136                 };
 137
 138                 ethernet-phy@1f {
 139                         reg = <0x1f>;
 140                         phy-mode = "rgmii";
 141                 };
 142         };
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147 };
 148
 149 &pcie0 {
 150         wifi@0,0 {
 151                 compatible = "mediatek,mt76";
 152                 reg = <0x0000 0 0 0 0>;
 153                 mediatek,mtd-eeprom = <&factory 0x8000>;
 154                 ieee80211-freq-limit = <5000000 6000000>;
 155         };
 156 };
 157
 158 &wmac {
 159         ralink,mtd-eeprom = <&factory 0x0>;
 160 };