target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
  10         model = "TP-Link Archer C2 v1";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 lan {
  27                         label = "archer-c2-v1:green:lan";
  28                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 usb {
  32                         label = "archer-c2-v1:green:usb";
  33                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  34                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37
  38                 led_wps: wps {
  39                         label = "archer-c2-v1:green:wps";
  40                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wan {
  44                         label = "archer-c2-v1:green:wan";
  45                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wlan {
  49                         label = "archer-c2-v1:green:wlan";
  50                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  51                 };
  52         };
  53
  54         keys {
  55                 compatible = "gpio-keys";
  56
  57                 reset_wps {
  58                         label = "reset_wps";
  59                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 rfkill {
  64                         label = "rfkill";
  65                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RFKILL>;
  67                 };
  68         };
  69
  70         rtl8367rb {
  71                 compatible = "realtek,rtl8367b", "rtl8367b";
  72                 cpu_port = <6>;
  73                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  74                 mii-bus = <&mdio0>;
  75         };
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0>;
  84                 spi-max-frequency = <10000000>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 label = "u-boot";
  93                                 reg = <0x0 0x20000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@20000 {
  98                                 compatible = "tplink,firmware";
  99                                 label = "firmware";
 100                                 reg = <0x20000 0x7a0000>;
 101                         };
 102
 103                         partition@7c0000 {
 104                                 label = "config";
 105                                 reg = <0x7c0000 0x10000>;
 106                                 read-only;
 107                         };
 108
 109                         rom: partition@7d0000 {
 110                                 label = "rom";
 111                                 reg = <0x7d0000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@7e0000 {
 116                                 label = "romfile";
 117                                 reg = <0x7e0000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         radio: partition@7f0000 {
 122                                 label = "radio";
 123                                 reg = <0x7f0000 0x10000>;
 124                                 read-only;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &ethernet {
 131         status = "okay";
 132         mtd-mac-address = <&rom 0xf100>;
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 135
 136         port@5 {
 137                 status = "okay";
 138                 mediatek,fixed-link = <1000 1 1 1>;
 139                 phy-mode = "rgmii";
 140         };
 141
 142         mdio0: mdio-bus {
 143                 status = "okay";
 144         };
 145 };
 146
 147 &gpio1 {
 148         status = "okay";
 149 };
 150
 151 &gpio2 {
 152         status = "okay";
 153 };
 154
 155 &gpio3 {
 156         status = "okay";
 157 };
 158
 159 &state_default {
 160         gpio {
 161                 ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
 162                 ralink,function = "gpio";
 163         };
 164 };
 165
 166 &wmac {
 167         ralink,mtd-eeprom = <&radio 0>;
 168         mtd-mac-address = <&rom 0xf100>;
 169 };
 170
 171 &ehci {
 172         status = "okay";
 173 };
 174
 175 &ohci {
 176         status = "okay";
 177 };
 178
 179 &pcie {
 180         status = "okay";
 181 };
 182
 183 &pcie0 {
 184         mt76@0,0 {
 185                 reg = <0x0000 0 0 0 0>;
 186                 mediatek,mtd-eeprom = <&radio 0x8000>;
 187         };
 188 };