target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
  10         model = "Asus RT-N12+";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 wan {
  27                         label = "rt-n12p:green:wan";
  28                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 lan {
  32                         label = "rt-n12p:green:lan";
  33                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_power: power {
  37                         label = "rt-n12p:green:power";
  38                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 air {
  42                         label = "rt-n12p:green:air";
  43                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55         };
  56 };
  57
  58 &gpio1 {
  59         status = "okay";
  60 };
  61
  62 &gpio2 {
  63         status = "okay";
  64 };
  65
  66 &gpio3 {
  67         status = "okay";
  68 };
  69
  70 &spi0 {
  71         status = "okay";
  72
  73         m25p80@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <10000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 label = "u-boot";
  85                                 reg = <0x0 0x30000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@30000 {
  90                                 label = "u-boot-env";
  91                                 reg = <0x30000 0x10000>;
  92                                 read-only;
  93                         };
  94
  95                         factory: partition@40000 {
  96                                 label = "factory";
  97                                 reg = <0x40000 0x10000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@50000 {
 102                                 compatible = "denx,uimage";
 103                                 label = "firmware";
 104                                 reg = <0x50000 0xfb0000>;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &ethernet {
 111         mtd-mac-address = <&factory 0x4>;
 112         mediatek,portmap = "wllll";
 113 };
 114
 115 &wmac {
 116         ralink,mtd-eeprom = <&factory 0>;
 117 };
 118
 119 &state_default {
 120         default {
 121                 groups = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
 122                 function = "gpio";
 123         };
 124 };