target/linux/ramips/dts/mt7621_zbtlink_zbt-we1326.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
  10         model = "Zbtlink ZBT-WE1326";
  11
  12         aliases {
  13                 label-mac-device = &wifi1;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30 };
  31
  32 &pinctrl {
  33         state_default: pinctrl0 {
  34                 gpio {
  35                         ralink,group = "wdt";
  36                         ralink,function = "gpio";
  37                 };
  38         };
  39 };
  40
  41 &spi0 {
  42         status = "okay";
  43
  44         m25p80@0 {
  45                 compatible = "jedec,spi-nor";
  46                 reg = <0>;
  47                 spi-max-frequency = <10000000>;
  48
  49                 partitions {
  50                         compatible = "fixed-partitions";
  51                         #address-cells = <1>;
  52                         #size-cells = <1>;
  53
  54                         partition@0 {
  55                                 label = "u-boot";
  56                                 reg = <0x0 0x30000>;
  57                                 read-only;
  58                         };
  59
  60                         partition@30000 {
  61                                 label = "u-boot-env";
  62                                 reg = <0x30000 0x10000>;
  63                                 read-only;
  64                         };
  65
  66                         factory: partition@40000 {
  67                                 label = "factory";
  68                                 reg = <0x40000 0x10000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@50000 {
  73                                 compatible = "denx,uimage";
  74                                 label = "firmware";
  75                                 reg = <0x50000 0xfb0000>;
  76                         };
  77                 };
  78         };
  79 };
  80
  81 &ethernet {
  82         mtd-mac-address = <&factory 0xe000>;
  83 };
  84
  85 &pcie {
  86         status = "okay";
  87 };
  88
  89 &pcie0 {
  90         wifi0: mt76@0,0 {
  91                 reg = <0x0000 0 0 0 0>;
  92                 mediatek,mtd-eeprom = <&factory 0x8000>;
  93                 ieee80211-freq-limit = <5000000 6000000>;
  94         };
  95 };
  96
  97 &pcie1 {
  98         wifi1: mt76@0,0 {
  99                 reg = <0x0000 0 0 0 0>;
 100                 mediatek,mtd-eeprom = <&factory 0x0000>;
 101                 ieee80211-freq-limit = <2400000 2500000>;
 102         };
 103 };
 104
 105 &sdhci {
 106         status = "okay";
 107 };