target/linux/ramips/dts/mt7628an_cudy_wr1000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "cudy,wr1000", "mediatek,mt7628an-soc";
  11         model = "Cudy WR1000";
  12
  13         aliases {
  14                 led-boot = &led_wps;
  15                 led-failsafe = &led_wps;
  16                 led-upgrade = &led_wps;
  17                 label-mac-device = &wmac;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29
  30                 wps {
  31                         label = "rfkill";
  32                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 lan1 {
  41                         label = "wr1000:blue:lan1";
  42                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 lan2 {
  46                         label = "wr1000:blue:lan2";
  47                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wan {
  51                         label = "wr1000:blue:wan";
  52                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wlan2g {
  56                         label = "wr1000:blue:wlan2g";
  57                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60
  61                 led_wps: wps {
  62                         label = "wr1000:blue:wps";
  63                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66 };
  67
  68 &spi0 {
  69         status = "okay";
  70
  71         flash@0 {
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 spi-max-frequency = <10000000>;
  75
  76                 partitions {
  77                         compatible = "fixed-partitions";
  78                         #address-cells = <1>;
  79                         #size-cells = <1>;
  80
  81                         partition@0 {
  82                                 label = "u-boot";
  83                                 reg = <0x0 0x30000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@30000 {
  88                                 label = "u-boot-env";
  89                                 reg = <0x30000 0x10000>;
  90                                 read-only;
  91                         };
  92
  93                         factory: partition@40000 {
  94                                 label = "factory";
  95                                 reg = <0x40000 0x10000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@50000 {
 100                                 compatible = "denx,uimage";
 101                                 label = "firmware";
 102                                 reg = <0x50000 0x7b0000>;
 103                         };
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "i2s", "refclk", "wdt", "p4led_an",
 112                                         "p3led_an", "p2led_an", "wled_an";
 113                         ralink,function = "gpio";
 114                 };
 115         };
 116 };
 117
 118 &pcie {
 119         status = "okay";
 120 };
 121
 122 &pcie0 {
 123         wifi@0,0 {
 124                 compatible = "mediatek,mt76";
 125                 reg = <0x0000 0 0 0 0>;
 126                 mediatek,mtd-eeprom = <&factory 0x8000>;
 127                 ieee80211-freq-limit = <5000000 6000000>;
 128
 129                 led {
 130                         led-sources = <2>;
 131                         led-active-low;
 132                 };
 133         };
 134 };
 135
 136 &wmac {
 137         status = "okay";
 138         ralink,mtd-eeprom = <&factory 0x4>;
 139 };
 140
 141 &ethernet {
 142         mtd-mac-address = <&factory 0x28>;
 143         mediatek,portmap = "llllw";
 144 };