target/linux/ramips/dts/mt7628an_mercury_mac1200r-v2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
  10         model = "Mercury MAC1200R v2";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_status: status {
  27                         label = "mac1200rv2:green:status";
  28                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31 };
  32
  33 &spi0 {
  34         status = "okay";
  35
  36         m25p80@0 {
  37                 compatible = "jedec,spi-nor";
  38                 reg = <0 0>;
  39                 spi-max-frequency = <10000000>;
  40
  41                 partitions {
  42                         compatible = "fixed-partitions";
  43                         #address-cells = <1>;
  44                         #size-cells = <1>;
  45
  46                         partition@0 {
  47                                 label = "u-boot";
  48                                 reg = <0x0 0x1d800>;
  49                         };
  50
  51                         factory: partition@1d800 {
  52                                 label = "factory_info";
  53                                 reg = <0x1d800 0x800>;
  54                                 read-only;
  55                         };
  56
  57                         art: partition@1e000 {
  58                                 label = "art";
  59                                 reg = <0x1e000 0x2000>;
  60                                 read-only;
  61                         };
  62
  63                         partition@20000 {
  64                                 label = "config";
  65                                 reg = <0x20000 0x10000>;
  66                         };
  67
  68                         partition@30000 {
  69                                 label = "u-boot2";
  70                                 reg = <0x30000 0x10000>;
  71                         };
  72
  73                         partition@40000 {
  74                                 compatible = "denx,uimage";
  75                                 label = "firmware";
  76                                 reg = <0x40000 0x7c0000>;
  77                         };
  78                 };
  79         };
  80 };
  81
  82 &ethernet {
  83         pinctrl-names = "default";
  84         mtd-mac-address = <&factory 0xd>;
  85         mediatek,portmap = "llllw";
  86 };
  87
  88 &wmac {
  89         status = "okay";
  90         ralink,mtd-eeprom = <&art 0x0>;
  91 };
  92
  93 &pcie {
  94         status = "okay";
  95 };
  96
  97 &pcie0 {
  98         mt76@0,0 {
  99                 reg = <0x0000 0 0 0 0>;
 100                 mediatek,mtd-eeprom = <&art 0x1000>;
 101                 ieee80211-freq-limit = <5000000 6000000>;
 102         };
 103 };