target/linux/ramips/dts/rt3050_jcg_jhr-n805r.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
  10         model = "JCG JHR-N805R";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_system: system {
  23                         label = "jhr-n805r:blue:system";
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37         };
  38 };
  39
  40 &state_default {
  41         gpio {
  42                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  43                 ralink,function = "gpio";
  44         };
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         m25p80@0 {
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <10000000>;
  54
  55                 partitions {
  56                         compatible = "fixed-partitions";
  57                         #address-cells = <1>;
  58                         #size-cells = <1>;
  59
  60                         partition@0 {
  61                                 label = "u-boot";
  62                                 reg = <0x0 0x30000>;
  63                                 read-only;
  64                         };
  65
  66                         partition@30000 {
  67                                 label = "u-boot-env";
  68                                 reg = <0x30000 0x10000>;
  69                                 read-only;
  70                         };
  71
  72                         factory: partition@40000 {
  73                                 label = "factory";
  74                                 reg = <0x40000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@50000 {
  79                                 compatible = "denx,uimage";
  80                                 label = "firmware";
  81                                 reg = <0x50000 0x3b0000>;
  82                         };
  83                 };
  84         };
  85 };
  86
  87 &ethernet {
  88         mtd-mac-address = <&factory 0x2e>;
  89 };
  90
  91 &esw {
  92         mediatek,portmap = <0x3e>;
  93 };
  94
  95 &wmac {
  96         ralink,mtd-eeprom = <&factory 0>;
  97 };