--- /dev/null
+/*
+ * Atheros GS_MINIBOX_V3.2 reference board support
+ *
+ * Copyright (c) 2018 OpenWRT.org
+ * Copyright (c) 2013 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define GS_MINIBOX_V3_GPIO_LED_STATUS 14
+#define GS_MINIBOX_V3_GPIO_BTN_RST 17
+#define GS_MINIBOX_V3_KEYS_POLL_INTERVAL 20 /* msecs */
+#define GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL (3 * GS_MINIBOX_V3_KEYS_POLL_INTERVAL)
+#define GS_MINIBOX_V3_MAC0_OFFSET 0
+#define GS_MINIBOX_V3_MAC1_OFFSET 6
+#define GS_MINIBOX_V3_WMAC_CALDATA_OFFSET 0x1000
+
+static const char *gs_minibox_v3_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data gs_minibox_v3_flash_data = {
+ .part_probes = gs_minibox_v3_part_probes,
+};
+
+static struct gpio_led gs_minibox_v3_leds_gpio[] __initdata = {
+ {
+ .name = "minibox_v3.2:green:system",
+ .gpio = GS_MINIBOX_V3_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button gs_minibox_v3_gpio_keys[] __initdata = {
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GS_MINIBOX_V3_GPIO_BTN_RST,
+ .active_low = 1,
+ },
+};
+
+static void __init gs_minibox_v3_gpio_led_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v3_leds_gpio),
+ gs_minibox_v3_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, GS_MINIBOX_V3_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(gs_minibox_v3_gpio_keys),
+ gs_minibox_v3_gpio_keys);
+}
+
+static void __init gs_minibox_v3_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&gs_minibox_v3_flash_data);
+ gs_minibox_v3_gpio_led_setup();
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + GS_MINIBOX_V3_WMAC_CALDATA_OFFSET, NULL);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + GS_MINIBOX_V3_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + GS_MINIBOX_V3_MAC1_OFFSET, 0);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V32, "MINIBOX-V3.2", "Minibox V3.2",
+ gs_minibox_v3_setup);
projects / openwrt / staging / mkresin.git / commitdiff