ramips: hc5xxx: use switch trigger for leds

netdev on eth0.2 can't show link status of wan port because eth0 is
connected to builtin switch and is always link up. Use swconfig
trigger instead.

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
[redo commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index d5ea20127951d50f26ca0e0b29afba03bceb9d87..e54300dafba164a615e5ef6e0e78a69137f03e51 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -204,7 +204,7 @@ hauppauge,broadway)
        set_wifi_led "$boardname:red:wps_active"
        ;;
 hiwifi,hc5661)
-       ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+       ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
        set_wifi_led "$boardname:blue:wlan2g"
        ;;
 hiwifi,hc5661a|\
@@ -212,9 +212,13 @@ hiwifi,hc5761a|\
 xzwifi,creativebox-v1)
        ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
        ;;
-hiwifi,hc5761|\
+hiwifi,hc5761)
+       ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+       ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+       ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+       ;;
 hiwifi,hc5861)
-       ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+       ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
        ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
        ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
        ;;