target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 #!/bin/ash
   2
   3 [ "$ACTION" = "add" ] || exit 0
   4
   5 PHYNBR=${DEVPATH##*/phy}
   6
   7 [ -n $PHYNBR ] || exit 0
   8
   9 . /lib/functions.sh
  10 . /lib/functions/system.sh
  11 . /lib/functions/k2t.sh
  12
  13 board=$(board_name)
  14
  15 case "$board" in
  16         adtran,bsap1800-v2|\
  17         adtran,bsap1840)
  18                 macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
  19                 ;;
  20         dlink,dap-1330-a1|\
  21         dlink,dap-1365-a1|\
  22         dlink,dch-g020-a1)
  23                 mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dap-2230-a1|\
  26         dlink,dap-3320-a1)
  27                 mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
  28                 ;;
  29         dlink,dap-2660-a1|\
  30         dlink,dap-2680-a1|\
  31         dlink,dap-2695-a1|\
  32         dlink,dap-3662-a1)
  33                 [ "$PHYNBR" -eq 0 ] && \
  34                         mtd_get_mac_ascii bdcfg "wlanmac_a" > /sys${DEVPATH}/macaddress
  35                 [ "$PHYNBR" -eq 1 ] && \
  36                         mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
  37                 ;;
  38         engenius,esr1750|\
  39         engenius,esr900)
  40                 macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" "$PHYNBR" > /sys${DEVPATH}/macaddress
  41                 ;;
  42         fortinet,fap-221-b)
  43                 macaddr_add "$(mtd_get_mac_text u-boot 0x3ff80 12)" $((PHYNBR*7+1)) > /sys${DEVPATH}/macaddress
  44                 ;;
  45         iodata,wn-ac1600dgr)
  46                 # There is no eeprom data for 5 GHz wlan in "art" partition
  47                 # which would allow to patch the macaddress
  48                 [ "$PHYNBR" -eq 0 ] && \
  49                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  50                 ;;
  51         iodata,wn-ag300dgr)
  52                 # There is no eeprom data for 5 GHz wlan in "art" partition
  53                 # which would allow to patch the macaddress
  54                 [ "$PHYNBR" -eq 1 ] && \
  55                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  56                 ;;
  57         phicomm,k2t)
  58                 # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
  59                 [ "$PHYNBR" -eq 1 ] && \
  60                         k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
  61                 ;;
  62         siemens,ws-ap3610)
  63                 mtd_get_mac_ascii cfg1 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress
  64                 ;;
  65         trendnet,tew-823dru)
  66                 # set the 2.4G interface mac address to LAN MAC
  67                 [ "$PHYNBR" -eq 1 ] && \
  68                         mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
  69                 # set the 5G interface mac address to WAN MAC + 1
  70                 [ "$PHYNBR" -eq 0 ] && \
  71                         macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
  72                 ;;
  73         zyxel,nbg6616)
  74                 # Set mac address for 2.4g device
  75                 [ "$PHYNBR" -eq 1 ] && \
  76                         mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
  77                 ;;
  78         zyxel,nwa1123-ac)
  79                 [ "$PHYNBR" -eq 0 ] && \
  80                         mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
  81                 ;;
  82         zyxel,nwa1123-ni)
  83                 [ "$PHYNBR" -eq 1 ] && \
  84                         mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
  85                 ;;
  86 esac