target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts

   1 #include "bcm6362.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Sagem F@st 2504N";
   7         compatible = "sagem,fast-2504n", "brcm,bcm6362";
   8
   9         aliases {
  10                 led-boot = &led_ok_green;
  11                 led-failsafe = &led_ok_green;
  12                 led-running = &led_ok_green;
  13                 led-upgrade = &led_ok_green;
  14         };
  15
  16         chosen {
  17                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&pinctrl 24 1>;
  30                         linux,code = <KEY_RESTART>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "wps";
  36                         gpios = <&pinctrl 25 1>;
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         debounce-interval = <60>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 power_orange {
  46                         label = "orange:power";
  47                         gpios = <&pinctrl 2 1>;
  48                 };
  49                 power_green {
  50                         label = "green:power";
  51                         gpios = <&pinctrl 10 1>;
  52                         default-state = "on";
  53                 };
  54                 inet_red {
  55                         label = "red:internet";
  56                         gpios = <&pinctrl 26 1>;
  57                 };
  58                 led_ok_green: ok_green {
  59                         label = "green:ok";
  60                         gpios = <&pinctrl 28 1>;
  61                 };
  62                 ok_orange {
  63                         label = "orange:ok";
  64                         gpios = <&pinctrl 29 1>;
  65                 };
  66                 wlan_orangee {
  67                         label = "orange:wlan";
  68                         gpios = <&pinctrl 30 1>;
  69                 };
  70         };
  71 };
  72
  73 &hsspi {
  74         status = "okay";
  75
  76         flash@0 {
  77                 compatible = "jedec,spi-nor";
  78                 spi-max-frequency = <20000000>;
  79                 spi-tx-bus-width = <2>;
  80                 spi-rx-bus-width = <2>;
  81                 reg = <0>;
  82
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         cfe@0 {
  92                                 reg = <0x000000 0x010000>;
  93                                 label = "cfe";
  94                                 read-only;
  95                         };
  96
  97                         linux@10000 {
  98                                 reg = <0x010000 0x7e0000>;
  99                                 label = "linux";
 100                                 compatible = "brcm,bcm963xx-imagetag";
 101                         };
 102
 103                         nvram@7f0000 {
 104                                 reg = <0x7f0000 0x010000>;
 105                                 label = "nvram";
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &uart0 {
 112         status = "okay";
 113 };