+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Aruba AP-303";
- compatible = "aruba,ap-303";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi_green {
- label = "green:wifi";
- gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_amber {
- label = "amber:wifi";
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- led_system_red: system_red {
- label = "red:system";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system_green {
- label = "green:system";
- gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 54 - out - active low to force HW reset
- * 41 - out - active low to reset TPM
- * 43 - out - active low to reset BLE radio
- * 19 - in - active high when DC powered
- */
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <42 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "ART";
- reg = <0xe0000 0x10000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0xf0000>;
- read-only;
- };
-
- partition@1e0000 {
- label = "mfginfo";
- reg = <0x1e0000 0x10000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_mfginfo_1d: macaddr@1d {
- compatible = "mac-base";
- reg = <0x1d 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@1f0000 {
- label = "apcd";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@200000 {
- label = "osss";
- reg = <0x200000 0x180000>;
- read-only;
- };
-
- partition@380000 {
- label = "appsblenv";
- reg = <0x380000 0x10000>;
- };
-
- partition@390000 {
- label = "pds";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- /* Called osss1 in smem */
- label = "u-boot-env-bak";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
projects / openwrt / staging / stintel.git / blobdiff