ramips: add support for YunCore FAP640
authorVolodymyr Puiul <volodymyr.puiul@gmail.com>
Wed, 19 Oct 2022 20:05:16 +0000 (00:05 +0400)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 30 Oct 2022 22:14:45 +0000 (23:14 +0100)
It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.

Specifications:
- SoC: MT7621AT (880MHz, 2 Cores)
- RAM: 128 MB
- Flash: 16 MB SPI
- Wi-Fi:
    - MT7915DN + MT7905DAN: 2.4/5 GHz
- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
- UART: J4 (115200 baud)
    - Pinout: [3V3] (TXD) (RXD) (GND)
- Power: 802.11af/at PoE;

- Bootloader: U-Boot
- Buttons:
    - Reset
- LEDs:
    - Status - RGB controlled by
      - GPIO 14 LOW - green color
      - GPIO 15 LOW- red color
      - GPIO 16 LOW - blue color
    - WAN - gren color, controlled by switch GPIO 12 LOW
    - LAN1 - gren color, controlled by switch GPIO 9 HIGH
    - LAN2 - gren color, controlled by switch GPIO 6 LOW
    - LAN3 - gren color, controlled by switch GPIO 3 LOW
    - LAN4 - gren color, controlled by switch GPIO 0 LOW

Installation:
OEM firmware is based on LEDE with custom UI and support standard sysupgrade
variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
router will not boot.

MAC addresses with OEM firmware:
vendor   source
lan      factory 0x4 (label)
5g       factory 0x4 (label)
2g       label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
  4-th byte

Example
label:  44:xx:xx:b7:xx:xx
lan:    44:xx:xx:b7:xx:xx
2g      46:xx:xx:c7:xx:xx
5g      44:xx:xx:b7:xx:xx

Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
target/linux/ramips/dts/mt7621_yuncore_fap640.dts [new file with mode: 0644]
target/linux/ramips/image/mt7621.mk
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

diff --git a/target/linux/ramips/dts/mt7621_yuncore_fap640.dts b/target/linux/ramips/dts/mt7621_yuncore_fap640.dts
new file mode 100644 (file)
index 0000000..a0c32a0
--- /dev/null
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "yuncore,fap640", "mediatek,mt7621-soc";
+       model = "YunCore FAP640";
+
+       aliases {
+               led-boot = &led_status_blue;
+               led-failsafe = &led_status_red;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_red;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status_green: status_green {
+                       label = "green:status";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               led_status_red: status_red {
+                       label = "red:status";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               led_status_blue: status_blue {
+                       label = "blue:status";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "green:wan";
+                       gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "mt7530-0:04:link";
+               };
+
+               lan1 {
+                       label = "green:lan1";
+                       gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "mt7530-0:03:link";
+               };
+
+               lan2 {
+                       label = "green:lan2";
+                       gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "mt7530-0:02:link";
+               };
+
+               lan3 {
+                       label = "green:lan3";
+                       gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "mt7530-0:01:link";
+               };
+
+               lan4 {
+                       label = "green:lan4";
+                       gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "mt7530-0:00:link";
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               hw_algo = "toggle";
+               hw_margin_ms = <200>;
+               always-running;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <80000000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "Bootloader";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "Config";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       /* range 0x40000 to 0x50000 is empty in vendor
+                        * firmware, so we do not use it either
+                        */
+
+                       factory: partition@50000 {
+                               label = "Factory";
+                               reg = <0x50000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@90000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x90000 0xf70000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+               mediatek,disable-radar-background;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_0004>;
+       nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+       gpio-controller;
+       #gpio-cells = <2>;
+
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "wan";
+                       nvmem-cells = <&macaddr_factory_0004>;
+                       nvmem-cell-names = "mac-address";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "jtag", "wdt";
+               function = "gpio";
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_0004: macaddr@0004 {
+               reg = <0x0004 0x6>;
+       };
+};
+
index 30d928fdad767d396cdeffb1b75c78523a75aff1..46b30f01af609e77e74bea4f8ee7166b8a6450a8 100644 (file)
@@ -2263,6 +2263,16 @@ define Device/yuncore_ax820
 endef
 TARGET_DEVICES += yuncore_ax820
 
+define Device/yuncore_fap640
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 15808k
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := FAP640
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_fap640
+
 define Device/zbtlink_zbt-we1326
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)
index 3c2872ae2cbddefe0a9bf9af89172941da4dff12..ca69745ba6fda40fe9549a23e36fcf3579c50017 100644 (file)
@@ -126,6 +126,11 @@ case "$board" in
                [ "$PHYNBR" = "1" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
                ;;
+       yuncore,fap640)
+               hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
+               [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               ;;
        zyxel,nwa50ax|\
        zyxel,nwa55axe)
                hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"