--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "beeline,smartbox-turbo-plus", "mediatek,mt7621-soc";
+ model = "Beeline SmartBox TURBO+";
+
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "blue:wan";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: led-1 {
+ label = "green:status";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: led-2 {
+ label = "red:status";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x0 0x4f80000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ sercomm,scpart-id = <0>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "dynamic partition map";
+ reg = <0x100000 0x100000>;
+ sercomm,scpart-id = <1>;
+ read-only;
+ };
+
+ factory: partition@200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ sercomm,scpart-id = <2>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_21000: macaddr@21000 {
+ reg = <0x21000 0x6>;
+ };
+ };
+
+ partition@300000 {
+ label = "Boot Flag";
+ reg = <0x300000 0x100000>;
+ sercomm,scpart-id = <3>;
+ };
+
+ partition@400000 {
+ label = "kernel";
+ reg = <0x400000 0x600000>;
+ sercomm,scpart-id = <4>;
+ };
+
+ partition@a00000 {
+ label = "Kernel 2";
+ reg = <0xa00000 0x600000>;
+ sercomm,scpart-id = <5>;
+ read-only;
+ };
+
+ ubiconcat0: partition@1000000 {
+ label = "File System 1";
+ reg = <0x1000000 0x2000000>;
+ sercomm,scpart-id = <6>;
+ };
+
+ partition@3000000 {
+ label = "File System 2";
+ reg = <0x3000000 0x2000000>;
+ sercomm,scpart-id = <7>;
+ read-only;
+ };
+
+ ubiconcat1: partition@5000000 {
+ label = "Configuration/log";
+ reg = <0x5000000 0x1400000>;
+ sercomm,scpart-id = <8>;
+ };
+
+ ubiconcat2: partition@6400000 {
+ label = "application tmp buffer (Ftool)";
+ reg = <0x6400000 0x1b80000>;
+ sercomm,scpart-id = <9>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(5)>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(4)>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_21000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(1)>;
+};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@1 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&uartlite3 {
+ status = "okay";
+ current-speed = <57600>;
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "jtag";
+ function = "gpio";
+ };
+};
DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_ROOTFS_OFFSET
+DEVICE_VARS += SERCOMM_KERNEL2_OFFSET SERCOMM_ROOTFS2_OFFSET
define Build/sercomm-crypto
$(TOPDIR)/scripts/sercomm-crypto.py \
rm -f $@.enc $@.key
endef
+define Build/sercomm-factory-cqr
+ $(TOPDIR)/scripts/sercomm-pid.py \
+ --hw-version $(SERCOMM_HWVER) \
+ --hw-id $(SERCOMM_HWID) \
+ --sw-version $(SERCOMM_SWVER) \
+ --pid-file $@.fhdr
+ printf $$(stat -c%s $(IMAGE_KERNEL)) | \
+ dd seek=$$((0x70)) of=$@.fhdr bs=1 conv=notrunc 2>/dev/null
+ printf $$(($$(stat -c%s $@)-$$(stat -c%s $(IMAGE_KERNEL))-$$((0x200)))) | \
+ dd seek=$$((0x80)) of=$@.fhdr bs=1 conv=notrunc 2>/dev/null
+ dd bs=$$((0x200)) skip=1 if=$@ conv=notrunc 2>/dev/null | \
+ $(MKHASH) md5 | awk '{print $$1}' | tr -d '\n' | \
+ dd seek=$$((0x1e0)) of=$@.fhdr bs=1 conv=notrunc 2>/dev/null
+ dd if=$@ >> $@.fhdr 2>/dev/null
+ mv $@.fhdr $@
+endef
+
define Build/sercomm-kernel
$(TOPDIR)/scripts/sercomm-kernel-header.py \
--kernel-image $@ \
mv $@.hdr $@
endef
+define Build/sercomm-kernel-factory
+ $(TOPDIR)/scripts/sercomm-kernel-header.py \
+ --kernel-image $@ \
+ --kernel-offset $(SERCOMM_KERNEL_OFFSET) \
+ --rootfs-offset $(SERCOMM_ROOTFS_OFFSET) \
+ --output-header $@.khdr1
+ $(TOPDIR)/scripts/sercomm-kernel-header.py \
+ --kernel-image $@ \
+ --kernel-offset $(SERCOMM_KERNEL2_OFFSET) \
+ --rootfs-offset $(SERCOMM_ROOTFS2_OFFSET) \
+ --output-header $@.khdr2
+ cat $@.khdr1 $@.khdr2 > $@.khdr
+ dd if=$@ >> $@.khdr 2>/dev/null
+ mv $@.khdr $@
+endef
+
define Build/sercomm-part-tag
$(call Build/sercomm-part-tag-common,$(word 1,$(1)) $@)
endef
mv $(IMAGE_KERNEL).tagged $@
endef
-define Device/sercomm_dxx
- $(Device/dsa-migration)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 6144k
- UBINIZE_OPTS := -E 5
+define Device/sercomm
+ $(Device/nand)
LOADER_TYPE := bin
+ KERNEL_SIZE := 6144k
KERNEL_LOADADDR := 0x81001000
LZMA_TEXT_START := 0x82800000
+ SERCOMM_KERNEL_OFFSET := 0x400100
+ SERCOMM_ROOTFS_OFFSET := 0x1000000
+ IMAGES += factory.img
+endef
+
+define Device/sercomm_cxx
+ $(Device/sercomm)
+ SERCOMM_KERNEL2_OFFSET := 0xa00100
+ SERCOMM_ROOTFS2_OFFSET := 0x3000000
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma -a0 | \
+ uImage lzma
+ IMAGE/sysupgrade.bin := append-kernel | sercomm-kernel | \
+ sysupgrade-tar kernel=$$$$@ | append-metadata
+ IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
+ append-ubi | sercomm-factory-cqr
+endef
+
+define Device/sercomm_dxx
+ $(Device/sercomm)
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma -a0 | \
uImage lzma | sercomm-kernel
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
lzma -a0 | uImage lzma
- IMAGES += factory.img
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.img := append-ubi | check-size | \
sercomm-part-tag rootfs | sercomm-prepend-tagged-kernel kernel | \
gzip | sercomm-payload | sercomm-crypto
- SERCOMM_KERNEL_OFFSET := 0x400100
- SERCOMM_ROOTFS_OFFSET := 0x1000000
endef
projects / openwrt / staging / stintel.git / commitdiff