2 # Copyright (C) 2006-2015 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
8 OTHER_MENU
:=Other modules
10 WATCHDOG_DIR
:=watchdog
13 define KernelPackage
/6lowpan
14 SUBMENU
:=$(OTHER_MENU
)
15 TITLE
:=6LoWPAN shared code
19 FILES
:=$(LINUX_DIR
)/net
/6lowpan
/6lowpan.ko
20 AUTOLOAD
:=$(call AutoProbe
,6lowpan
)
23 define KernelPackage
/6lowpan
/description
24 Shared
6lowpan code for IEEE
802.15.4 and Bluetooth.
27 $(eval
$(call KernelPackage
,6lowpan
))
30 define KernelPackage
/bluetooth
31 SUBMENU
:=$(OTHER_MENU
)
32 TITLE
:=Bluetooth support
33 DEPENDS
:=@USB_SUPPORT
+kmod-usb-core
+kmod-crypto-hash
+kmod-crypto-ecb
+kmod-lib-crc16
+kmod-hid
+kmod-crypto-cmac
+kmod-regmap-core
+kmod-crypto-ecdh
42 CONFIG_BT_HCIBTUSB_BCM
=n \
44 CONFIG_BT_HCIUART_BCM
=n \
45 CONFIG_BT_HCIUART_INTEL
=n \
46 CONFIG_BT_HCIUART_H4 \
47 CONFIG_BT_HCIUART_NOKIA
=n \
49 $(call AddDepends
/rfkill
)
51 $(LINUX_DIR
)/net
/bluetooth
/bluetooth.ko \
52 $(LINUX_DIR
)/net
/bluetooth
/rfcomm
/rfcomm.ko \
53 $(LINUX_DIR
)/net
/bluetooth
/bnep
/bnep.ko \
54 $(LINUX_DIR
)/net
/bluetooth
/hidp
/hidp.ko \
55 $(LINUX_DIR
)/drivers
/bluetooth
/hci_uart.ko \
56 $(LINUX_DIR
)/drivers
/bluetooth
/btusb.ko \
57 $(LINUX_DIR
)/drivers
/bluetooth
/btintel.ko
58 AUTOLOAD
:=$(call AutoProbe
,bluetooth rfcomm bnep hidp hci_uart btusb
)
61 define KernelPackage
/bluetooth
/description
62 Kernel support for Bluetooth devices
65 $(eval
$(call KernelPackage
,bluetooth
))
67 define KernelPackage
/ath3k
68 SUBMENU
:=$(OTHER_MENU
)
69 TITLE
:=ATH3K Kernel Module support
70 DEPENDS
:=+kmod-bluetooth
+ar3k-firmware
73 CONFIG_BT_HCIUART_ATH3K
=y
74 $(call AddDepends
/bluetooth
)
76 $(LINUX_DIR
)/drivers
/bluetooth
/ath3k.ko
77 AUTOLOAD
:=$(call AutoProbe
,ath3k
)
80 define KernelPackage
/ath3k
/description
81 Kernel support for ATH3K Module
84 $(eval
$(call KernelPackage
,ath3k
))
87 define KernelPackage
/bluetooth-6lowpan
88 SUBMENU
:=$(OTHER_MENU
)
89 TITLE
:=Bluetooth
6LoWPAN support
90 DEPENDS
:=+kmod-6lowpan
+kmod-bluetooth
91 KCONFIG
:=CONFIG_BT_6LOWPAN
92 FILES
:=$(LINUX_DIR
)/net
/bluetooth
/bluetooth_6lowpan.ko
93 AUTOLOAD
:=$(call AutoProbe
,bluetooth_6lowpan
)
96 define KernelPackage
/bluetooth-6lowpan
/description
97 Kernel support for
6LoWPAN over Bluetooth Low Energy devices
100 $(eval
$(call KernelPackage
,bluetooth-6lowpan
))
103 define KernelPackage
/btmrvl
104 SUBMENU
:=$(OTHER_MENU
)
105 TITLE
:=Marvell Bluetooth Kernel Module support
106 DEPENDS
:=+kmod-mmc
+kmod-bluetooth
+mwifiex-sdio-firmware
110 $(call AddDepends
/bluetooth
)
112 $(LINUX_DIR
)/drivers
/bluetooth
/btmrvl.ko \
113 $(LINUX_DIR
)/drivers
/bluetooth
/btmrvl_sdio.ko
114 AUTOLOAD
:=$(call AutoProbe
,btmrvl btmrvl_sdio
)
117 define KernelPackage
/btmrvl
/description
118 Kernel support for Marvell SDIO Bluetooth Module
121 $(eval
$(call KernelPackage
,btmrvl
))
124 define KernelPackage
/dma-buf
125 SUBMENU
:=$(OTHER_MENU
)
126 TITLE
:=DMA shared buffer support
128 KCONFIG
:=CONFIG_DMA_SHARED_BUFFER
129 ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE
)),"")
130 ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI
)),"")
131 FILES
:=$(LINUX_DIR
)/drivers
/dma-buf
/dma-shared-buffer.ko
134 AUTOLOAD
:=$(call AutoLoad
,20,dma-shared-buffer
)
136 $(eval
$(call KernelPackage
,dma-buf
))
139 define KernelPackage
/nvmem
140 SUBMENU
:=$(OTHER_MENU
)
141 TITLE
:=Non Volatile Memory support
143 KCONFIG
:=CONFIG_NVMEM
145 FILES
:=$(LINUX_DIR
)/drivers
/nvmem
/nvmem_core.ko
148 define KernelPackage
/nvmem
/description
149 Support for NVMEM
(Non Volatile Memory
) devices like EEPROM
, EFUSES
, etc.
152 $(eval
$(call KernelPackage
,nvmem
))
154 define KernelPackage
/eeprom-93cx6
155 SUBMENU
:=$(OTHER_MENU
)
156 TITLE
:=EEPROM
93CX6 support
157 KCONFIG
:=CONFIG_EEPROM_93CX6
158 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/eeprom_93cx6.ko
159 AUTOLOAD
:=$(call AutoLoad
,20,eeprom_93cx6
)
162 define KernelPackage
/eeprom-93cx6
/description
163 Kernel module for EEPROM
93CX6 support
166 $(eval
$(call KernelPackage
,eeprom-93cx6
))
169 define KernelPackage
/eeprom-at24
170 SUBMENU
:=$(OTHER_MENU
)
171 TITLE
:=EEPROM AT24 support
172 KCONFIG
:=CONFIG_EEPROM_AT24
173 DEPENDS
:=+kmod-i2c-core
+!LINUX_5_4
:kmod-nvmem
+!LINUX_4_14
:kmod-regmap-i2c
174 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/at24.ko
175 AUTOLOAD
:=$(call AutoProbe
,at24
)
178 define KernelPackage
/eeprom-at24
/description
179 Kernel module for most I2C EEPROMs
182 $(eval
$(call KernelPackage
,eeprom-at24
))
185 define KernelPackage
/eeprom-at25
186 SUBMENU
:=$(OTHER_MENU
)
187 TITLE
:=EEPROM AT25 support
188 KCONFIG
:=CONFIG_EEPROM_AT25
189 DEPENDS
:=+!LINUX_5_4
:kmod-nvmem
190 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/at25.ko
191 AUTOLOAD
:=$(call AutoProbe
,at25
)
194 define KernelPackage
/eeprom-at25
/description
195 Kernel module for most SPI EEPROMs
198 $(eval
$(call KernelPackage
,eeprom-at25
))
201 define KernelPackage
/gpio-dev
202 SUBMENU
:=$(OTHER_MENU
)
203 TITLE
:=Generic GPIO char device support
204 DEPENDS
:=@GPIO_SUPPORT
205 KCONFIG
:=CONFIG_GPIO_DEVICE
206 FILES
:=$(LINUX_DIR
)/drivers
/char
/gpio_dev.ko
207 AUTOLOAD
:=$(call AutoLoad
,40,gpio_dev
)
210 define KernelPackage
/gpio-dev
/description
211 Kernel module to allows control of GPIO pins using a character device.
214 $(eval
$(call KernelPackage
,gpio-dev
))
217 define KernelPackage
/gpio-f7188x
218 SUBMENU
:=$(OTHER_MENU
)
219 TITLE
:=Fintek F718xx
/F818xx GPIO Support
220 DEPENDS
:=@GPIO_SUPPORT @TARGET_x86
221 KCONFIG
:=CONFIG_GPIO_F7188X
222 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-f7188x.ko
223 AUTOLOAD
:=$(call AutoProbe
,gpio-f7188x
)
226 define KernelPackage
/gpio-f7188x
/description
227 Kernel module for the GPIOs found on many Fintek Super-IO chips.
230 $(eval
$(call KernelPackage
,gpio-f7188x
))
233 define KernelPackage
/gpio-mcp23s08
234 SUBMENU
:=$(OTHER_MENU
)
235 TITLE
:=Microchip MCP23xxx I
/O expander
236 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
+kmod-regmap-i2c
238 CONFIG_GPIO_MCP23S08 \
239 CONFIG_PINCTRL_MCP23S08
241 $(LINUX_DIR
)/drivers
/pinctrl
/pinctrl-mcp23s08.ko
242 AUTOLOAD
:=$(call AutoLoad
,40,pinctrl-mcp23s08
)
245 define KernelPackage
/gpio-mcp23s08
/description
246 Kernel module for Microchip MCP23xxx SPI
/I2C I
/O expander
249 $(eval
$(call KernelPackage
,gpio-mcp23s08
))
252 define KernelPackage
/gpio-nxp-74hc164
253 SUBMENU
:=$(OTHER_MENU
)
254 TITLE
:=NXP
74HC164 GPIO expander support
255 KCONFIG
:=CONFIG_GPIO_74X164
256 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-74x164.ko
257 AUTOLOAD
:=$(call AutoProbe
,gpio-74x164
)
260 define KernelPackage
/gpio-nxp-74hc164
/description
261 Kernel module for NXP
74HC164 GPIO expander
264 $(eval
$(call KernelPackage
,gpio-nxp-74hc164
))
266 define KernelPackage
/gpio-pca953x
267 SUBMENU
:=$(OTHER_MENU
)
268 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
+LINUX_5_4
:kmod-regmap-i2c
269 TITLE
:=PCA95xx
, TCA64xx
, and MAX7310 I
/O ports
270 KCONFIG
:=CONFIG_GPIO_PCA953X
271 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-pca953x.ko
272 AUTOLOAD
:=$(call AutoLoad
,55,gpio-pca953x
)
275 define KernelPackage
/gpio-pca953x
/description
276 Kernel module for MAX731
{0,2,3,5}, PCA6107
, PCA953
{4-9}, PCA955
{4-7},
277 PCA957
{4,5} and TCA64
{08,16} I2C GPIO expanders
280 $(eval
$(call KernelPackage
,gpio-pca953x
))
282 define KernelPackage
/gpio-pcf857x
283 SUBMENU
:=$(OTHER_MENU
)
284 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
285 TITLE
:=PCX857x
, PCA967x and MAX732X I2C GPIO expanders
286 KCONFIG
:=CONFIG_GPIO_PCF857X
287 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-pcf857x.ko
288 AUTOLOAD
:=$(call AutoLoad
,55,gpio-pcf857x
)
291 define KernelPackage
/gpio-pcf857x
/description
292 Kernel module for PCF857x
, PCA
{85,96}7x
, and MAX732
[89] I2C GPIO expanders
295 $(eval
$(call KernelPackage
,gpio-pcf857x
))
298 define KernelPackage
/gpio-it87
299 SUBMENU
:=$(OTHER_MENU
)
300 DEPENDS
:=@GPIO_SUPPORT @TARGET_x86
301 TITLE
:=GPIO support for IT87xx Super I
/O chips
302 KCONFIG
:=CONFIG_GPIO_IT87
303 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-it87.ko
304 AUTOLOAD
:=$(call AutoLoad
,25,gpio-it87
,1)
307 define KernelPackage
/gpio-it87
/description
308 This driver is tested with ITE IT8728 and IT8732 Super I
/O chips
, and
309 supports the IT8761E
, IT8613
, IT8620E
, and IT8628E Super I
/O chips
as
313 $(eval
$(call KernelPackage
,gpio-it87
))
316 define KernelPackage
/ppdev
317 SUBMENU
:=$(OTHER_MENU
)
318 TITLE
:=Parallel port support
323 $(LINUX_DIR
)/drivers
/parport
/parport.ko \
324 $(LINUX_DIR
)/drivers
/char
/ppdev.ko
325 AUTOLOAD
:=$(call AutoLoad
,50,parport ppdev
)
328 $(eval
$(call KernelPackage
,ppdev
))
331 define KernelPackage
/parport-pc
332 SUBMENU
:=$(OTHER_MENU
)
333 TITLE
:=Parallel port interface
(PC-style
) support
338 CONFIG_PARPORT_1284
=y \
339 CONFIG_PARPORT_PC_FIFO
=y \
340 CONFIG_PARPORT_PC_PCMCIA
=n \
341 CONFIG_PARPORT_PC_SUPERIO
=y \
342 CONFIG_PARPORT_SERIAL
=n \
347 $(LINUX_DIR
)/drivers
/parport
/parport_pc.ko
348 AUTOLOAD
:=$(call AutoLoad
,51,parport_pc
)
351 $(eval
$(call KernelPackage
,parport-pc
))
354 define KernelPackage
/lp
355 SUBMENU
:=$(OTHER_MENU
)
356 TITLE
:=Parallel port line printer device support
361 $(LINUX_DIR
)/drivers
/char
/lp.ko
362 AUTOLOAD
:=$(call AutoLoad
,52,lp
)
365 $(eval
$(call KernelPackage
,lp
))
368 define KernelPackage
/mmc
369 SUBMENU
:=$(OTHER_MENU
)
370 TITLE
:=MMC
/SD Card Support
371 DEPENDS
:=@
!TARGET_uml
376 CONFIG_MMC_UNSAFE_RESUME
=n \
377 CONFIG_MMC_BLOCK_BOUNCE
=y \
378 CONFIG_MMC_TIFM_SD
=n \
382 $(LINUX_DIR
)/drivers
/mmc
/core
/mmc_core.ko \
383 $(LINUX_DIR
)/drivers
/mmc
/core
/mmc_block.ko
384 AUTOLOAD
:=$(call AutoProbe
,mmc_core mmc_block
,1)
387 define KernelPackage
/mmc
/description
388 Kernel support for MMC
/SD cards
391 $(eval
$(call KernelPackage
,mmc
))
394 define KernelPackage
/sdhci
395 SUBMENU
:=$(OTHER_MENU
)
396 TITLE
:=Secure Digital Host Controller Interface support
400 CONFIG_MMC_SDHCI_PLTFM \
401 CONFIG_MMC_SDHCI_PCI
=n
403 $(LINUX_DIR
)/drivers
/mmc
/host
/sdhci.ko \
404 $(LINUX_DIR
)/drivers
/mmc
/host
/sdhci-pltfm.ko
406 AUTOLOAD
:=$(call AutoProbe
,sdhci-pltfm
,1)
409 define KernelPackage
/sdhci
/description
410 Kernel support for SDHCI Hosts
413 $(eval
$(call KernelPackage
,sdhci
))
416 define KernelPackage
/rfkill
417 SUBMENU
:=$(OTHER_MENU
)
418 TITLE
:=RF switch subsystem support
419 DEPENDS
:=@USE_RFKILL
+kmod-input-core
422 CONFIG_RFKILL_INPUT
=y \
425 $(LINUX_DIR
)/net
/rfkill
/rfkill.ko
426 AUTOLOAD
:=$(call AutoLoad
,20,rfkill
)
429 define KernelPackage
/rfkill
/description
430 Say Y here if you want to have control over RF switches
431 found on many WiFi and Bluetooth cards
434 $(eval
$(call KernelPackage
,rfkill
))
437 define KernelPackage
/softdog
438 SUBMENU
:=$(OTHER_MENU
)
439 TITLE
:=Software watchdog driver
440 KCONFIG
:=CONFIG_SOFT_WATCHDOG \
441 CONFIG_SOFT_WATCHDOG_PRETIMEOUT
=n
442 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/softdog.ko
443 AUTOLOAD
:=$(call AutoLoad
,50,softdog
,1)
446 define KernelPackage
/softdog
/description
447 Software watchdog driver
450 $(eval
$(call KernelPackage
,softdog
))
453 define KernelPackage
/ssb
454 SUBMENU
:=$(OTHER_MENU
)
455 TITLE
:=Silicon Sonics Backplane glue code
456 DEPENDS
:=@PCI_SUPPORT @
!TARGET_bcm47xx @
!TARGET_bcm63xx
459 CONFIG_SSB_B43_PCI_BRIDGE
=y \
460 CONFIG_SSB_DRIVER_MIPS
=n \
461 CONFIG_SSB_DRIVER_PCICORE
=y \
462 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE
=y \
463 CONFIG_SSB_PCIHOST
=y \
464 CONFIG_SSB_PCIHOST_POSSIBLE
=y \
465 CONFIG_SSB_POSSIBLE
=y \
468 FILES
:=$(LINUX_DIR
)/drivers
/ssb
/ssb.ko
469 AUTOLOAD
:=$(call AutoLoad
,18,ssb
,1)
472 define KernelPackage
/ssb
/description
473 Silicon Sonics Backplane glue code.
476 $(eval
$(call KernelPackage
,ssb
))
479 define KernelPackage
/bcma
480 SUBMENU
:=$(OTHER_MENU
)
482 DEPENDS
:=@PCI_SUPPORT @
!TARGET_bcm47xx @
!TARGET_bcm53xx
485 CONFIG_BCMA_POSSIBLE
=y \
486 CONFIG_BCMA_BLOCKIO
=y \
487 CONFIG_BCMA_HOST_PCI_POSSIBLE
=y \
488 CONFIG_BCMA_HOST_PCI
=y \
489 CONFIG_BCMA_HOST_SOC
=n \
490 CONFIG_BCMA_DRIVER_MIPS
=n \
491 CONFIG_BCMA_DRIVER_PCI_HOSTMODE
=n \
492 CONFIG_BCMA_DRIVER_GMAC_CMN
=n \
494 FILES
:=$(LINUX_DIR
)/drivers
/bcma
/bcma.ko
495 AUTOLOAD
:=$(call AutoLoad
,29,bcma
)
498 define KernelPackage
/bcma
/description
499 Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture
502 $(eval
$(call KernelPackage
,bcma
))
505 define KernelPackage
/rtc-ds1307
506 SUBMENU
:=$(OTHER_MENU
)
507 TITLE
:=Dallas
/Maxim DS1307
(and compatible
) RTC support
508 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
509 DEPENDS
:=+kmod-i2c-core
+kmod-regmap-i2c
+kmod-hwmon-core
510 KCONFIG
:=CONFIG_RTC_DRV_DS1307 \
512 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1307.ko
513 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1307
)
516 define KernelPackage
/rtc-ds1307
/description
517 Kernel module for Dallas
/Maxim DS1307
/DS1337
/DS1338
/DS1340
/DS1388
/DS3231
,
518 Epson RX-8025 and various other compatible RTC chips connected via I2C.
521 $(eval
$(call KernelPackage
,rtc-ds1307
))
524 define KernelPackage
/rtc-ds1374
525 SUBMENU
:=$(OTHER_MENU
)
526 TITLE
:=Dallas
/Maxim DS1374 RTC support
527 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
528 DEPENDS
:=+kmod-i2c-core
529 KCONFIG
:=CONFIG_RTC_DRV_DS1374 \
530 CONFIG_RTC_DRV_DS1374_WDT
=n \
532 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1374.ko
533 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1374
)
536 define KernelPackage
/rtc-ds1374
/description
537 Kernel module for Dallas
/Maxim DS1374.
540 $(eval
$(call KernelPackage
,rtc-ds1374
))
543 define KernelPackage
/rtc-ds1672
544 SUBMENU
:=$(OTHER_MENU
)
545 TITLE
:=Dallas
/Maxim DS1672 RTC support
546 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
547 DEPENDS
:=+kmod-i2c-core
548 KCONFIG
:=CONFIG_RTC_DRV_DS1672 \
550 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1672.ko
551 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1672
)
554 define KernelPackage
/rtc-ds1672
/description
555 Kernel module for Dallas
/Maxim DS1672 RTC.
558 $(eval
$(call KernelPackage
,rtc-ds1672
))
561 define KernelPackage
/rtc-em3027
562 SUBMENU
:=$(OTHER_MENU
)
563 TITLE
:=Microelectronic EM3027 RTC support
564 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
565 DEPENDS
:=+kmod-i2c-core
566 KCONFIG
:=CONFIG_RTC_DRV_EM3027 \
568 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-em3027.ko
569 AUTOLOAD
:=$(call AutoProbe
,rtc-em3027
)
572 define KernelPackage
/rtc-em3027
/description
573 Kernel module for Microelectronic EM3027 RTC.
576 $(eval
$(call KernelPackage
,rtc-em3027
))
579 define KernelPackage
/rtc-isl1208
580 SUBMENU
:=$(OTHER_MENU
)
581 TITLE
:=Intersil ISL1208 RTC support
582 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
583 DEPENDS
:=+kmod-i2c-core
584 KCONFIG
:=CONFIG_RTC_DRV_ISL1208 \
586 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-isl1208.ko
587 AUTOLOAD
:=$(call AutoProbe
,rtc-isl1208
)
590 define KernelPackage
/rtc-isl1208
/description
591 Kernel module for Intersil ISL1208 RTC.
594 $(eval
$(call KernelPackage
,rtc-isl1208
))
597 define KernelPackage
/rtc-pcf8563
598 SUBMENU
:=$(OTHER_MENU
)
599 TITLE
:=Philips PCF8563
/Epson RTC8564 RTC support
600 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
601 DEPENDS
:=+kmod-i2c-core
602 KCONFIG
:=CONFIG_RTC_DRV_PCF8563 \
604 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf8563.ko
605 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf8563
)
608 define KernelPackage
/rtc-pcf8563
/description
609 Kernel module for Philips PCF8563 RTC chip.
610 The Epson RTC8564 should work
as well.
613 $(eval
$(call KernelPackage
,rtc-pcf8563
))
616 define KernelPackage
/rtc-pcf2123
617 SUBMENU
:=$(OTHER_MENU
)
618 TITLE
:=Philips PCF2123 RTC support
619 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
620 DEPENDS
:=+LINUX_5_4
:kmod-regmap-spi
621 KCONFIG
:=CONFIG_RTC_DRV_PCF2123 \
623 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf2123.ko
624 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf2123
)
627 define KernelPackage
/rtc-pcf2123
/description
628 Kernel module for Philips PCF2123 RTC chip
631 $(eval
$(call KernelPackage
,rtc-pcf2123
))
633 define KernelPackage
/rtc-pcf2127
634 SUBMENU
:=$(OTHER_MENU
)
635 TITLE
:=NXP PCF2127 and PCF2129 RTC support
636 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
637 DEPENDS
:=+kmod-i2c-core
+kmod-regmap-spi
638 KCONFIG
:=CONFIG_RTC_DRV_PCF2127 \
640 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf2127.ko
641 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf2127
)
644 define KernelPackage
/rtc-pcf2127
/description
645 Kernel module for NXP PCF2127 and PCF2129 RTC chip
648 $(eval
$(call KernelPackage
,rtc-pcf2127
))
650 define KernelPackage
/rtc-pt7c4338
651 SUBMENU
:=$(OTHER_MENU
)
652 TITLE
:=Pericom PT7C4338 RTC support
653 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
654 DEPENDS
:=+kmod-i2c-core
655 KCONFIG
:=CONFIG_RTC_DRV_PT7C4338 \
657 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pt7c4338.ko
658 AUTOLOAD
:=$(call AutoProbe
,rtc-pt7c4338
)
661 define KernelPackage
/rtc-pt7c4338
/description
662 Kernel module for Pericom PT7C4338 i2c RTC chip
665 $(eval
$(call KernelPackage
,rtc-pt7c4338
))
667 define KernelPackage
/rtc-rs5c372a
668 SUBMENU
:=$(OTHER_MENU
)
669 TITLE
:=Ricoh R2025S
/D
, RS5C372A
/B
, RV5C386
, RV5C387A
670 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
671 DEPENDS
:=+kmod-i2c-core
672 KCONFIG
:=CONFIG_RTC_DRV_RS5C372 \
674 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-rs5c372.ko
675 AUTOLOAD
:=$(call AutoLoad
,50,rtc-rs5c372
,1)
678 define KernelPackage
/rtc-rs5c372a
/description
679 Kernel module for Ricoh R2025S
/D
, RS5C372A
/B
, RV5C386
, RV5C387A RTC on chip module
682 $(eval
$(call KernelPackage
,rtc-rs5c372a
))
684 define KernelPackage
/rtc-rx8025
685 SUBMENU
:=$(OTHER_MENU
)
686 TITLE
:=Epson RX-8025
/ RX-8035
687 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
688 DEPENDS
:=+kmod-i2c-core
689 KCONFIG
:=CONFIG_RTC_DRV_RX8025 \
691 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-rx8025.ko
692 AUTOLOAD
:=$(call AutoLoad
,50,rtc-rx8025
,1)
695 define KernelPackage
/rtc-rx8025
/description
696 Kernel module for Epson RX-8025 and RX-8035 I2C RTC chip
699 $(eval
$(call KernelPackage
,rtc-rx8025
))
702 define KernelPackage
/mtdtests
703 SUBMENU
:=$(OTHER_MENU
)
704 TITLE
:=MTD subsystem tests
705 KCONFIG
:=CONFIG_MTD_TESTS
707 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_nandecctest.ko \
708 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_oobtest.ko \
709 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_pagetest.ko \
710 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_readtest.ko \
711 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_speedtest.ko \
712 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_stresstest.ko \
713 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_subpagetest.ko \
714 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_torturetest.ko
717 define KernelPackage
/mtdtests
/description
718 Kernel modules for MTD subsystem
/driver testing
721 $(eval
$(call KernelPackage
,mtdtests
))
724 define KernelPackage
/mtdoops
725 SUBMENU
:=$(OTHER_MENU
)
726 TITLE
:=Log panic
/oops to an MTD buffer
727 KCONFIG
:=CONFIG_MTD_OOPS
728 FILES
:=$(LINUX_DIR
)/drivers
/mtd
/mtdoops.ko
731 define KernelPackage
/mtdoops
/description
732 Kernel modules for Log panic
/oops to an MTD buffer
735 $(eval
$(call KernelPackage
,mtdoops
))
738 define KernelPackage
/mtdram
739 SUBMENU
:=$(OTHER_MENU
)
740 TITLE
:=Test MTD driver using RAM
741 KCONFIG
:=CONFIG_MTD_MTDRAM \
742 CONFIG_MTDRAM_TOTAL_SIZE
=4096 \
743 CONFIG_MTDRAM_ERASE_SIZE
=128
744 FILES
:=$(LINUX_DIR
)/drivers
/mtd
/devices
/mtdram.ko
747 define KernelPackage
/mtdram
/description
748 Test MTD driver using RAM
751 $(eval
$(call KernelPackage
,mtdram
))
754 define KernelPackage
/serial-8250
755 SUBMENU
:=$(OTHER_MENU
)
757 KCONFIG
:= CONFIG_SERIAL_8250 \
758 CONFIG_SERIAL_8250_PCI \
759 CONFIG_SERIAL_8250_NR_UARTS
=16 \
760 CONFIG_SERIAL_8250_RUNTIME_UARTS
=16 \
761 CONFIG_SERIAL_8250_EXTENDED
=y \
762 CONFIG_SERIAL_8250_MANY_PORTS
=y \
763 CONFIG_SERIAL_8250_SHARE_IRQ
=y \
764 CONFIG_SERIAL_8250_DETECT_IRQ
=n \
765 CONFIG_SERIAL_8250_RSA
=n
767 $(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250.ko \
768 $(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_base.ko \
769 $(if
$(CONFIG_PCI
),$(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_pci.ko
) \
770 $(if
$(CONFIG_GPIOLIB
),$(LINUX_DIR
)/drivers
/tty
/serial
/serial_mctrl_gpio.ko@ge5.3
)
771 AUTOLOAD
:=$(call AutoProbe
,8250 8250_base
8250_pci
)
774 define KernelPackage
/serial-8250
/description
775 Kernel module for
8250 UART based serial ports
778 $(eval
$(call KernelPackage
,serial-8250
))
781 define KernelPackage
/serial-8250-exar
782 SUBMENU
:=$(OTHER_MENU
)
783 TITLE
:=Exar
8250 UARTs
784 KCONFIG
:= CONFIG_SERIAL_8250_EXAR
785 FILES
:=$(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_exar.ko
786 AUTOLOAD
:=$(call AutoProbe
,8250 8250_base
8250_exar
)
787 DEPENDS
:=+kmod-serial-8250
790 define KernelPackage
/serial-8250-exar
/description
791 Kernel module for Exar serial ports
794 $(eval
$(call KernelPackage
,serial-8250-exar
))
797 define KernelPackage
/regmap-core
798 SUBMENU
:=$(OTHER_MENU
)
799 TITLE
:=Generic register map support
801 KCONFIG
:=CONFIG_REGMAP
802 ifneq ($(wildcard $(LINUX_DIR
)/drivers
/base
/regmap
/regmap-core.ko
),)
803 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-core.ko
807 define KernelPackage
/regmap-core
/description
808 Generic register map support
811 $(eval
$(call KernelPackage
,regmap-core
))
814 define KernelPackage
/regmap-spi
815 SUBMENU
:=$(OTHER_MENU
)
816 TITLE
:=SPI register map support
817 DEPENDS
:=+kmod-regmap-core
819 KCONFIG
:=CONFIG_REGMAP_SPI \
821 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-spi.ko
824 define KernelPackage
/regmap-spi
/description
825 SPI register map support
828 $(eval
$(call KernelPackage
,regmap-spi
))
831 define KernelPackage
/regmap-i2c
832 SUBMENU
:=$(OTHER_MENU
)
833 TITLE
:=I2C register map support
834 DEPENDS
:=+kmod-regmap-core
+kmod-i2c-core
836 KCONFIG
:=CONFIG_REGMAP_I2C
837 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-i2c.ko
840 define KernelPackage
/regmap-i2c
/description
841 I2C register map support
844 $(eval
$(call KernelPackage
,regmap-i2c
))
847 define KernelPackage
/regmap-mmio
848 SUBMENU
:=$(OTHER_MENU
)
849 TITLE
:=MMIO register map support
850 DEPENDS
:=+kmod-regmap-core
852 KCONFIG
:=CONFIG_REGMAP_MMIO
853 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-mmio.ko
856 define KernelPackage
/regmap-mmio
/description
857 MMIO register map support
860 $(eval
$(call KernelPackage
,regmap-mmio
))
863 define KernelPackage
/ikconfig
864 SUBMENU
:=$(OTHER_MENU
)
865 TITLE
:=Kernel configuration via
/proc
/config.gz
866 KCONFIG
:=CONFIG_IKCONFIG \
867 CONFIG_IKCONFIG_PROC
=y
868 FILES
:=$(LINUX_DIR
)/kernel
/configs.ko
869 AUTOLOAD
:=$(call AutoLoad
,70,configs
)
872 define KernelPackage
/ikconfig
/description
873 Kernel configuration via
/proc
/config.gz
876 $(eval
$(call KernelPackage
,ikconfig
))
879 define KernelPackage
/zram
880 SUBMENU
:=$(OTHER_MENU
)
882 DEPENDS
:=+kmod-lib-lzo
+kmod-lib-lz4
886 CONFIG_ZRAM_DEBUG
=n \
887 CONFIG_PGTABLE_MAPPING
=n \
888 CONFIG_ZRAM_WRITEBACK
=n \
889 CONFIG_ZSMALLOC_STAT
=n \
890 CONFIG_ZRAM_LZ4_COMPRESS
=y
892 $(LINUX_DIR
)/mm
/zsmalloc.ko \
893 $(LINUX_DIR
)/drivers
/block
/zram
/zram.ko
894 AUTOLOAD
:=$(call AutoLoad
,20,zsmalloc zram
)
897 define KernelPackage
/zram
/description
898 Compressed RAM block device support
901 $(eval
$(call KernelPackage
,zram
))
904 define KernelPackage
/pps
905 SUBMENU
:=$(OTHER_MENU
)
908 FILES
:=$(LINUX_DIR
)/drivers
/pps
/pps_core.ko
909 AUTOLOAD
:=$(call AutoLoad
,17,pps_core
,1)
912 define KernelPackage
/pps
/description
913 PPS
(Pulse Per Second
) is a special pulse provided by some GPS
914 antennae. Userland can use it to
get a high-precision time
918 $(eval
$(call KernelPackage
,pps
))
921 define KernelPackage
/pps-gpio
922 SUBMENU
:=$(OTHER_MENU
)
923 TITLE
:=PPS client using GPIO
925 KCONFIG
:=CONFIG_PPS_CLIENT_GPIO
926 FILES
:=$(LINUX_DIR
)/drivers
/pps
/clients
/pps-gpio.ko
927 AUTOLOAD
:=$(call AutoLoad
,18,pps-gpio
,1)
930 define KernelPackage
/pps-gpio
/description
931 Support for a PPS source using GPIO. To be useful you must
932 also register a platform device specifying the GPIO pin and
933 other options
, usually in your board setup.
936 $(eval
$(call KernelPackage
,pps-gpio
))
939 define KernelPackage
/pps-ldisc
940 SUBMENU
:=$(OTHER_MENU
)
941 TITLE
:=PPS line discipline
943 KCONFIG
:=CONFIG_PPS_CLIENT_LDISC
944 FILES
:=$(LINUX_DIR
)/drivers
/pps
/clients
/pps-ldisc.ko
945 AUTOLOAD
:=$(call AutoLoad
,18,pps-ldisc
,1)
948 define KernelPackage
/pps-ldisc
/description
949 Support for a PPS source connected with the CD
(Carrier
950 Detect
) pin of your serial port.
953 $(eval
$(call KernelPackage
,pps-ldisc
))
956 define KernelPackage
/ptp
957 SUBMENU
:=$(OTHER_MENU
)
958 TITLE
:=PTP clock support
961 CONFIG_PTP_1588_CLOCK \
962 CONFIG_NET_PTP_CLASSIFY
=y
963 FILES
:=$(LINUX_DIR
)/drivers
/ptp
/ptp.ko
964 AUTOLOAD
:=$(call AutoLoad
,18,ptp
,1)
967 define KernelPackage
/ptp
/description
968 The IEEE
1588 standard defines a method to precisely
969 synchronize distributed clocks over Ethernet networks.
972 $(eval
$(call KernelPackage
,ptp
))
975 define KernelPackage
/ptp-gianfar
976 SUBMENU
:=$(OTHER_MENU
)
977 TITLE
:=Freescale Gianfar PTP support
978 DEPENDS
:=@TARGET_mpc85xx
+kmod-ptp @LINUX_4_14
979 KCONFIG
:=CONFIG_PTP_1588_CLOCK_GIANFAR
980 FILES
:=$(LINUX_DIR
)/drivers
/net
/ethernet
/freescale
/gianfar_ptp.ko
981 AUTOLOAD
:=$(call AutoProbe
,gianfar_ptp
)
984 define KernelPackage
/ptp-gianfar
/description
985 Kernel module for IEEE
1588 support for Freescale
986 Gianfar Ethernet drivers
989 $(eval
$(call KernelPackage
,ptp-gianfar
))
991 define KernelPackage
/ptp-qoriq
992 SUBMENU
:=$(OTHER_MENU
)
993 TITLE
:=Freescale QorIQ PTP support
994 DEPENDS
:=@TARGET_mpc85xx
+kmod-ptp @
!LINUX_4_14
995 KCONFIG
:=CONFIG_PTP_1588_CLOCK_QORIQ
996 FILES
:=$(LINUX_DIR
)/drivers
/ptp
/ptp-qoriq.ko
997 AUTOLOAD
:=$(call AutoProbe
,ptp-qoriq
)
1001 define KernelPackage
/ptp-qoriq
/description
1002 Kernel module for IEEE
1588 support for Freescale
1003 QorIQ Ethernet drivers
1006 $(eval
$(call KernelPackage
,ptp-qoriq
))
1008 define KernelPackage
/random-core
1009 SUBMENU
:=$(OTHER_MENU
)
1010 TITLE
:=Hardware Random Number Generator Core support
1011 KCONFIG
:=CONFIG_HW_RANDOM
1012 FILES
:=$(LINUX_DIR
)/drivers
/char
/hw_random
/rng-core.ko
1015 define KernelPackage
/random-core
/description
1016 Kernel module for the HW random number generator core infrastructure
1019 $(eval
$(call KernelPackage
,random-core
))
1022 define KernelPackage
/random-tpm
1023 SUBMENU
:=$(OTHER_MENU
)
1024 TITLE
:=Hardware Random Number Generator TPM support
1025 KCONFIG
:=CONFIG_HW_RANDOM_TPM
1026 FILES
:=$(LINUX_DIR
)/drivers
/char
/hw_random
/tpm-rng.ko
1027 DEPENDS
:= +kmod-random-core
+kmod-tpm @LINUX_4_14
1028 AUTOLOAD
:=$(call AutoProbe
,tpm-rng
)
1031 define KernelPackage
/random-tpm
/description
1032 Kernel module for the Random Number Generator
1033 in the Trusted Platform Module.
1036 $(eval
$(call KernelPackage
,random-tpm
))
1038 define KernelPackage
/thermal
1039 SUBMENU
:=$(OTHER_MENU
)
1040 TITLE
:=Generic Thermal sysfs driver
1041 DEPENDS
:=+kmod-hwmon-core
1045 CONFIG_THERMAL_OF
=y \
1046 CONFIG_CPU_THERMAL
=y \
1047 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE
=y \
1048 CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE
=n \
1049 CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE
=n \
1050 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS
=0 \
1051 CONFIG_THERMAL_GOV_FAIR_SHARE
=n \
1052 CONFIG_THERMAL_GOV_STEP_WISE
=y \
1053 CONFIG_THERMAL_GOV_USER_SPACE
=n \
1054 CONFIG_THERMAL_HWMON
=y \
1055 CONFIG_THERMAL_EMULATION
=n
1056 FILES
:=$(LINUX_DIR
)/drivers
/thermal
/thermal_sys.ko
1057 AUTOLOAD
:=$(call AutoProbe
,thermal_sys
)
1060 define KernelPackage
/thermal
/description
1061 Generic Thermal Sysfs driver offers a generic mechanism for thermal
1062 management. Usually it
's made up of one or more thermal zone and cooling
1066 $(eval $(call KernelPackage,thermal))
1069 define KernelPackage/gpio-beeper
1070 SUBMENU:=$(OTHER_MENU)
1071 TITLE:=GPIO beeper support
1072 DEPENDS:=+kmod-input-core
1074 CONFIG_INPUT_MISC=y \
1075 CONFIG_INPUT_GPIO_BEEPER
1077 $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
1078 AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
1081 define KernelPackage/gpio-beeper/description
1082 This enables playing beeps through an GPIO-connected buzzer
1085 $(eval $(call KernelPackage,gpio-beeper))
1088 define KernelPackage/echo
1089 SUBMENU:=$(OTHER_MENU)
1090 TITLE:=Line Echo Canceller
1091 KCONFIG:=CONFIG_ECHO
1092 FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
1093 AUTOLOAD:=$(call AutoLoad,50,echo)
1096 define KernelPackage/echo/description
1097 This driver provides line echo cancelling support for mISDN and
1101 $(eval $(call KernelPackage,echo))
1104 define KernelPackage/bmp085
1105 SUBMENU:=$(OTHER_MENU)
1106 TITLE:=BMP085/BMP18x pressure sensor
1107 DEPENDS:= +kmod-regmap-core
1108 KCONFIG:= CONFIG_BMP085
1109 FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
1112 define KernelPackage/bmp085/description
1113 This driver adds support for Bosch Sensortec's digital pressure
1114 sensors BMP085 and BMP18x.
1117 $(eval
$(call KernelPackage
,bmp085
))
1120 define KernelPackage
/bmp085-i2c
1121 SUBMENU
:=$(OTHER_MENU
)
1122 TITLE
:=BMP085
/BMP18x pressure sensor I2C
1123 DEPENDS
:= +kmod-bmp085
1124 KCONFIG
:= CONFIG_BMP085_I2C
1125 FILES
:= $(LINUX_DIR
)/drivers
/misc
/bmp085-i2c.ko
1126 AUTOLOAD
:=$(call AutoProbe
,bmp085-i2c
)
1128 define KernelPackage
/bmp085-i2c
/description
1129 This driver adds support for Bosch Sensortec
's digital pressure
1130 sensor connected via I2C.
1133 $(eval $(call KernelPackage,bmp085-i2c))
1136 define KernelPackage/bmp085-spi
1137 SUBMENU:=$(OTHER_MENU)
1138 TITLE:=BMP085/BMP18x pressure sensor SPI
1139 DEPENDS:= +kmod-bmp085
1140 KCONFIG:= CONFIG_BMP085_SPI
1141 FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
1142 AUTOLOAD:=$(call AutoProbe,bmp085-spi)
1144 define KernelPackage/bmp085-spi/description
1145 This driver adds support for Bosch Sensortec's digital pressure
1146 sensor connected via SPI.
1149 $(eval
$(call KernelPackage
,bmp085-spi
))
1151 define KernelPackage
/tpm
1152 SUBMENU
:=$(OTHER_MENU
)
1153 TITLE
:=TPM Hardware Support
1154 DEPENDS
:= +!LINUX_4_14
:kmod-random-core
1155 KCONFIG
:= CONFIG_TCG_TPM
1156 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm.ko
1157 AUTOLOAD
:=$(call AutoLoad
,10,tpm
,1)
1160 define KernelPackage
/tpm
/description
1161 This enables TPM Hardware Support.
1164 $(eval
$(call KernelPackage
,tpm
))
1166 define KernelPackage
/tpm-tis
1167 SUBMENU
:=$(OTHER_MENU
)
1168 TITLE
:=TPM TIS
1.2 Interface
/ TPM
2.0 FIFO Interface
1169 DEPENDS
:= @TARGET_x86
+kmod-tpm
1170 KCONFIG
:= CONFIG_TCG_TIS
1172 $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_tis.ko \
1173 $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_tis_core.ko
1174 AUTOLOAD
:=$(call AutoLoad
,20,tpm_tis
,1)
1177 define KernelPackage
/tpm-tis
/description
1178 If you have a TPM security chip that is compliant with the
1179 TCG TIS
1.2 TPM specification
(TPM1.2
) or the TCG PTP FIFO
1180 specification
(TPM2.0
) say Yes and it will be accessible from
1184 $(eval
$(call KernelPackage
,tpm-tis
))
1186 define KernelPackage
/tpm-i2c-atmel
1187 SUBMENU
:=$(OTHER_MENU
)
1188 TITLE
:=TPM I2C Atmel Support
1189 DEPENDS
:= +kmod-tpm
+kmod-i2c-core
1190 KCONFIG
:= CONFIG_TCG_TIS_I2C_ATMEL
1191 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_i2c_atmel.ko
1192 AUTOLOAD
:=$(call AutoLoad
,40,tpm_i2c_atmel
,1)
1195 define KernelPackage
/tpm-i2c-atmel
/description
1196 This enables the TPM Interface Specification
1.2 Interface
(I2C
- Atmel
)
1199 $(eval
$(call KernelPackage
,tpm-i2c-atmel
))
1201 define KernelPackage
/tpm-i2c-infineon
1202 SUBMENU
:=$(OTHER_MENU
)
1203 TITLE
:= TPM I2C Infineon driver
1204 DEPENDS
:= +kmod-tpm
+kmod-i2c-core
1205 KCONFIG
:= CONFIG_TCG_TIS_I2C_INFINEON
1206 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_i2c_infineon.ko
1207 AUTOLOAD
:= $(call AutoLoad
,40,tpm_i2c_infineon
,1)
1210 define KernelPackage
/tpm-i2c-infineon
/description
1211 This enables the TPM Interface Specification
1.2 Interface
(I2C
- Infineon
)
1214 $(eval
$(call KernelPackage
,tpm-i2c-infineon
))
1217 define KernelPackage
/w83627hf-wdt
1218 SUBMENU
:=$(OTHER_MENU
)
1219 TITLE
:=Winbond
83627HF Watchdog Timer
1220 KCONFIG
:=CONFIG_W83627HF_WDT
1221 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/w83627hf_wdt.ko
1222 AUTOLOAD
:=$(call AutoLoad
,50,w83627hf-wdt
,1)
1225 define KernelPackage
/w83627hf-wdt
/description
1226 Kernel module for Winbond
83627HF Watchdog Timer
1229 $(eval
$(call KernelPackage
,w83627hf-wdt
))
1232 define KernelPackage
/itco-wdt
1233 SUBMENU
:=$(OTHER_MENU
)
1234 TITLE
:=Intel iTCO Watchdog Timer
1235 KCONFIG
:=CONFIG_ITCO_WDT \
1236 CONFIG_ITCO_VENDOR_SUPPORT
=y
1237 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/iTCO_wdt.ko \
1238 $(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/iTCO_vendor_support.ko
1239 AUTOLOAD
:=$(call AutoLoad
,50,iTCO_vendor_support iTCO_wdt
,1)
1242 define KernelPackage
/itco-wdt
/description
1243 Kernel module for Intel iTCO Watchdog Timer
1246 $(eval
$(call KernelPackage
,itco-wdt
))
1249 define KernelPackage
/it87-wdt
1250 SUBMENU
:=$(OTHER_MENU
)
1251 TITLE
:=ITE IT87 Watchdog Timer
1252 KCONFIG
:=CONFIG_IT87_WDT
1253 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/it87_wdt.ko
1254 AUTOLOAD
:=$(call AutoLoad
,50,it87-wdt
,1)
1255 MODPARAMS.it87-wdt
:= \
1260 define KernelPackage
/it87-wdt
/description
1261 Kernel module for ITE IT87 Watchdog Timer
1264 $(eval
$(call KernelPackage
,it87-wdt
))
1267 define KernelPackage
/f71808e-wdt
1268 SUBMENU
:=$(OTHER_MENU
)
1269 TITLE
:=Fintek F718xx
/F818xx Watchdog Timer
1270 DEPENDS
:=@TARGET_x86
1271 KCONFIG
:=CONFIG_F71808E_WDT
1272 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/f71808e_wdt.ko
1273 AUTOLOAD
:=$(call AutoProbe
,f71808e-wdt
,1)
1276 define KernelPackage
/f71808e-wdt
/description
1277 Kernel module for the watchdog timer found on many Fintek Super-IO chips.
1280 $(eval
$(call KernelPackage
,f71808e-wdt
))