target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power_green;
  11                 led-failsafe = &led_power_amber;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_amber;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         led_spi {
  18                 compatible = "spi-gpio";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  23                 mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  24                 num-chipselects = <0>;
  25
  26                 led_gpio: led_gpio@0 {
  27                         compatible = "nxp,74lvc594";
  28                         reg = <0>;
  29                         gpio-controller;
  30                         #gpio-cells = <2>;
  31                         registers-number = <1>;
  32                         spi-max-frequency = <500000>;
  33
  34                         gpio_latch_bit {
  35                                 gpio-hog;
  36                                 gpios = <4 GPIO_ACTIVE_HIGH>;
  37                                 output-high;
  38                                 line-name = "gpio-latch-bit";
  39                         };
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led_power_green: power_green {
  47                         label = "green:power";
  48                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 led_power_amber: power_amber {
  52                         label = "amber:power";
  53                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 left_blue {
  57                         label = "blue:left";
  58                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 right_blue {
  62                         label = "blue:right";
  63                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wps_green {
  67                         label = "green:wps";
  68                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 client_red {
  72                         label = "red:client";
  73                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 client_green {
  77                         label = "green:client";
  78                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 router_red {
  82                         label = "red:router";
  83                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 router_green {
  87                         label = "green:router";
  88                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91
  92         keys {
  93                 compatible = "gpio-keys";
  94
  95                 reset {
  96                         label = "Reset button";
  97                         linux,code = <KEY_RESTART>;
  98                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  99                         debounce-interval = <60>;
 100                 };
 101
 102                 wps {
 103                         label = "WPS button";
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 106                         debounce-interval = <60>;
 107                 };
 108
 109                 extender_apmode {
 110                         label = "EXTENDER/APMODE switch";
 111                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 112                         linux,code = <BTN_0>;
 113                         linux,input-type = <EV_SW>;
 114                         debounce-interval = <60>;
 115                 };
 116         };
 117 };
 118
 119 &pcie0 {
 120         status = "okay";
 121 };
 122
 123 &spi {
 124         status = "okay";
 125
 126         flash@0 {
 127                 compatible = "jedec,spi-nor";
 128                 reg = <0>;
 129                 spi-max-frequency = <25000000>;
 130
 131                 partitions {
 132                         compatible = "fixed-partitions";
 133                         #address-cells = <1>;
 134                         #size-cells = <1>;
 135
 136                         uboot: partition@0 {
 137                                 label = "u-boot";
 138                                 reg = <0x000000 0x040000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@40000 {
 143                                 label = "u-boot-env";
 144                                 reg = <0x040000 0x010000>;
 145                         };
 146
 147                         caldata: partition@50000 {
 148                                 label = "caldata";
 149                                 reg = <0x050000 0x010000>;
 150                                 read-only;
 151                         };
 152
 153                         partition@60000 {
 154                                 label = "caldata-backup";
 155                                 reg = <0x060000 0x010000>;
 156                                 read-only;
 157                         };
 158
 159                         partition@70000 {
 160                                 label = "config";
 161                                 reg = <0x070000 0x010000>;
 162                         };
 163
 164                         partition@80000 {
 165                                 label = "pot";
 166                                 reg = <0x080000 0x010000>;
 167                         };
 168
 169                         partition@90000 {
 170                                 label = "firmware";
 171                                 reg = <0x090000 0xf30000>;
 172                                 compatible = "denx,uimage";
 173                         };
 174
 175                         partition@fc0000 {
 176                                 label = "language";
 177                                 reg = <0xfc0000 0x040000>;
 178                         };
 179                 };
 180         };
 181 };
 182
 183 &wmac {
 184         status = "okay";
 185
 186         mtd-cal-data = <&caldata 0x1000>;
 187         nvmem-cells = <&macaddr_caldata_6>;
 188         nvmem-cell-names = "mac-address";
 189 };
 190
 191 &mdio0 {
 192         status = "okay";
 193
 194         phy4: ethernet-phy@4 {
 195                 reg = <4>;
 196                 phy-mode = "rgmii";
 197         };
 198 };
 199
 200 &eth0 {
 201         status = "okay";
 202
 203         nvmem-cells = <&macaddr_caldata_0>;
 204         nvmem-cell-names = "mac-address";
 205
 206         phy-handle = <&phy4>;
 207         phy-mode = "rgmii-rxid";
 208
 209         pll-data = <0x86000000 0x80000101 0x80001313>;
 210 };
 211
 212 &caldata {
 213         compatible = "nvmem-cells";
 214         #address-cells = <1>;
 215         #size-cells = <1>;
 216
 217         macaddr_caldata_0: macaddr@0 {
 218                 reg = <0x0 0x6>;
 219         };
 220
 221         macaddr_caldata_6: macaddr@6 {
 222                 reg = <0x6 0x6>;
 223         };
 224 };